ООО «Энерготех», г.Барнаул

The hot-dip galvanizing line is designed for anti-corrosion treatment of various metal structures and metal products using piece-production processes. All BPM-Technologies hot-dip galvanizing lines consist of 3 sections: 1. Site of preliminary chemical treatment; 2. Galvanizing area; 3. Transport and technological area; Depending on the line performance, the completing of these sections will vary. The presence of special technological equipment also allows for anti-corrosion treatment of hardware products.

The galvanizing section is intended for heating zinc and maintaining the operating temperature of the melt. The site provides for an impulse-type combustion plant with a heat-insulating coating and an autonomous hydrostatic shock tolerance system. The lining material in MC-1 is heat-resistant Skamol super. The galvanizing section includes a drying module, a galvanizing module and a washing / hardening module. BPM-Technologies has developed standard versions of hot-dip galvanizing lines. Galvanizing areas intended for embedding into a specific Line differ in the dimensions of the processed products. Depending on this parameter, the cost of the Galvanizing Site will differ

The universal press of the new PN-2013 series is equally convenient for the manufacture of furniture facades, doors and door linings, as well as for specific tasks such as the production of triplex glass, molding products from ABS plastic, acrylic and artificial stone. There is a possibility of manufacturing radius facades. In the basic configuration, the press is equipped with an Italian oil rotary vane pump, a system for smooth triac starting of heaters, and disconnecting heaters in three zones.

A unique press with a pneumatic drive for raising and lowering the working table. A discount is provided for the basic model with a desktop size of 1400x700 mm. The time of the action is limited. Only this press cuts the consumption of PVC film when laminating curved facades by half. In this case, the manufacturing process itself is simplified.

ISTOK-NS pumping stations are produced on the basis of Russian and imported pumps; with Russian pumps - an inexpensive and maintainable option, with SAER pumps - the best option in terms of price-quality ratio, with GRUNDFOS pumps - for the most reliable solutions. As part of pumping stations, pumps from Pedrollo, WILO, Ebara and others can be used. As part of the pumping stations, components are used that have been selected for seven years and have shown themselves to be reliable and affordable. These are pumps from well-known manufacturers (for example SAER IR40-200NB), compact butterfly valves (for example, ADL ZPVS-FL-3-100-MN-E on the discharge pipe and ZPVS-FL-3-125-MN-E on the suction pipe), flanged check valves (for example ADL CV16-100), flat welded flanges according to GOST 12820-80, blind flanges (plugs) according to GOST 12820, tees according to GOST 17376-2001 and bends, steel water and gas pipes according to GOST 3262-75 (primed and painted ), threads, ball and three-way valves for connecting instrumentation and water sampling, pressure gauges, as well as various structural elements that ensure the reliability and compact placement of the pump station units. All pumping stations can be manufactured both on a frame and in a block insulated container with lighting and automatic heating. The container can be ground or recessed. Warranty: 12 months for pumping stations with domestic pumps 24 months for pumping stations with imported pumps

ISTOK control cabinets are low-voltage complete devices ISTOK (NKU ISTOK), which are designed to automate water supply, are installed in wells, water intakes, pumping and sewerage stations, can be equipped with frequency converters, controllers, soft starters. Low-voltage devices ISTOK provide automatic regulation of pumps, maintaining the required technical parameters. Automation of pump control can significantly reduce the cost of introducing new and repairing out-of-order equipment for water supply systems. ISTOK control cabinets are used for frequency regulation of pressure, for pump control in the soft start and stop mode, maintaining the water level within the required limits. This is a complete device consisting of proven and reliable components, mainly imported. The installation can be carried out both indoor and outdoor, energy-saving mode at night, automatic pump change and other functions can be provided.

Design works, water treatment, CO2 free supply, technological equipment for the production of drinks (juice, cold teas, gin-tonics, energy drinks), complete filling line, bottle design, corks, labels, palletizing system, shelving, etc. FILLING LINES are completed according to the Customer's budget. The company offers equipment for filling lines only from European manufacturers. The company manufactures conveyor systems at its own production facility. The company also manufactures tank equipment for blending departments, CIP sinks. It repairs technological equipment for bottling lines, ensures the delivery of equipment to the customer's production site, performs customs clearance, service maintenance, and commissioning.

Cutting machines SO-400 of our own production. We produce the following machine models: SO-404B, SO-403V, SO-403G, SO-405E, SO-405M, SO-500. We also produce a cutting machine with a swivel head SOP-405. All machines have two drive belts. The pendulum unit on machine tools is made on bearings. Machine warranty 1 year.

Stone-cutting machine KS-500 of pendulum type for cutting stone and brick. Complete with 5.5 kW electric motor. Two drive belts. Pendulum unit on bearings. It is possible to install a disk Ф500 or Ф400mm. There is a coolant supply. The carriage has a size of 400x500mm. Carriage travel 300mm. The material is cut using a pendulum. During cutting, the carriage is rigidly fixed. Stone and brick cutting machine KS-500K of pendulum type. Complete with 5.5 kW electric motor. Two drive belts. Pendulum unit on bearings. It is possible to install a disk Ф500 or Ф400mm. There is a coolant supply. The carriage has a size of 400x500mm. Carriage travel 300mm. The pendulum is set to the required cutting depth and rigidly fixed. Cutting is done by moving the carriage.

Neutral equipment (tables, racks, sinks, shelves, etc.) for trade and public catering enterprises. All products are made of food grade stainless steel and have all the necessary certificates.

Kitchen tables for catering and trade. The table top is made of high quality stainless steel. The frame, at the request of the customer, can be painted or stainless. All tables can be completed with an additional shelf.

Kitchen shelves are made entirely of food grade stainless steel. At the request of the customer, the legs can be made of painted metal, Dimensions at the request of the customer. Archival racks (height * length * depth) 2000 * 1000 * 600 on 6 shelves.