Products Suppliers Requests

ООО «Энерготех», г.Барнаул

Share:
Not approved icon Not verified supplier
Make a safe deal with this supplier. Apply
Products

DK-5V cable jack. - 10870

ООО «Энерготех», г.Барнаул
Russia
USD 159.86/pcs 159.86
DK-5V cable jack. Screw cable jack, lifting capacity 5 tons. For cable unwinding from reels with number 8-22. This jack for cable unwinding from drums uses the screw-nut principle. The axis of the jack is threaded through the central holes of the drum, to exclude the movement of the drum along the axis during rewinding - the cable drum is fixed with clamping shoes (centering cones can be used if necessary), two racks are installed on the sides of the drum, after which the cable drum is lifted by rotating the jack handle ...
Contact with supplier

Three scissor lift tables from the manufacturer - 10865

ООО «Энерготех», г.Барнаул
Russia
USD 4567.47/pcs 4567.47
Three-scissor lifting hydraulic tables are designed to lift loads to a sufficiently large height (usually up to 12 m). Thanks to the three-scissor mechanism, it is possible to provide a significant lifting height with a relatively small lifting platform. Most often, three-scissor lifting tables are used in warehouse complexes. Also, such lifts are often used in industries where it is necessary to raise and lower large volumes of products and materials from one level to another. Three-scissor lifts are very common in car dealerships, large garages and parking lots. The weight of the lifted load can be very different: from hundreds of kilograms to ten tons. The height of the lift table when folded is dependent on the lift capacity of the lift, the size of the platform and the lift height.
Contact with supplier

Vibrating machine for cinder blocks - 10862

ООО «Энерготех», г.Барнаул
Russia
USD 456.75/pcs 456.75
EST-3 t19 machine for 3 standard blocks with dimensions 390 * 190 * 190. Simple, convenient and reliable in operation, a machine with a powerful vibration motor for 220V, Forming time for 3 blocks (1 cycle) 30-60 seconds, productivity from 50-120 blocks per hour, productivity depends on the supply of raw materials! Produced blocks with perfect geometry. The machine is suitable for the production of cinder blocks, expanded clay blocks, sand blocks, etc. The walls of the machine die are made of thick-walled metal, the hollow-formers of your choice are rectangular, round or slotted. There are also machines for 2/3/4/5/6 blocks combined options (2 blocks + 1 half-block), (4 blocks + 2 half-blocks). Concrete mixers (forced type) for 300l., 500l., 750l., 1000l., Vibrating tables, filling machines, belt conveyors, filling machines, molds for reinforced concrete rings.
Contact with supplier

Block and half block machine - 10860

ООО «Энерготех», г.Барнаул
Russia
USD 456.75/pcs 456.75
EST-3 (2 + 1) t19, t-12 machine for 2 standard blocks 390 * 190 * 190 and 1 half block 390 * 120 * 190. A simple, convenient and reliable machine with a powerful 220V vibration motor, Forming time for 3 blocks (1 cycle) 35-60 seconds, productivity from 50-120 blocks per hour, productivity depends on the supply of raw materials! Produced blocks with perfect geometry. The machine is suitable for the production of cinder blocks, expanded clay blocks, sand blocks, etc. The walls of the machine die are made of thick-walled metal, the hollow-formers of your choice are rectangular, round or slotted. There are also machines for 2/3/4/5/6 blocks combined options (2 blocks + 1 half-block), (4 blocks + 2 half-blocks). Concrete mixers (forced type) for 300l., 500l., 750l., 1000l., Vibrating tables, filling machines, belt conveyors, filling machines, molds for reinforced concrete rings.
Contact with supplier

Mini gas station 10m3 on a sleigh from the manufacturer - 10857

ООО «Энерготех», г.Барнаул
Russia
USD 5994.81/pcs 5994.81
Sleigh tanks are used in harsh climatic conditions where it is difficult and almost impossible to deliver fuel or other necessary production fluid. They gained their main popularity in the northern regions, where the main part of the year is harsh climatic conditions. This type of equipment can be transported by a heavy-duty vehicle as well as any type of tractor equipment. Thus, this type of equipment is mobile. And it can be transported on any surface. A big and important factor is that it is unnecessary to prepare sites during transportation. This type of containers on sledges are distinguished by their high resistance during their operation, as well as to wear. The tanks can be equipped with various technical equipment.
Contact with supplier

Heat accumulator KATRIN 1000 A - 10855

ООО «Энерготех», г.Барнаул
Russia
USD 2180.97/pcs 2180.97
Industrial heat accumulator KATRIN 1000 A with a tank volume of 1000 liters. It is a sealed reservoir that allows work under excessive internal pressure. Tank material: high-alloy carbon (boiler) or high-quality stainless steel. To increase the efficiency of the devices, external thermal insulation up to 100 mm thick is used, made in the form of a removable casing-cover. A modern heat insulator based on synthetic fibers is used, it is effective and safe. The heat accumulator is used as a storage buffer in heating and hot water systems; it does not have its own heaters and heat exchangers. Can be combined with other heat accumulators to form a battery. The main purpose is to reduce energy costs and increase the efficiency of water heaters.
Contact with supplier

Gas meters - 10852

ООО «Энерготех», г.Барнаул
Russia
USD 10.11/pcs 10.11
Household gas meter of membrane type NPM (NPM), standard sizes G1.6; G2.5; G4 is used to account for gas consumption (liquefied, natural, cracking gas, hydrocarbon gas composition and other non-aggressive gases) in housing and communal services and everyday life. According to the gas flow, the models are right-handed (supply from right-to-left) and, accordingly, left-handed.
Contact with supplier

Abrasive sandblasting machines - 10850

ООО «Энерготех», г.Барнаул
Russia
USD 411.07/pcs 411.07
Mobile pressure units of the DSG trademark with various displacement capacities of 25,50,75,100,160,200,250,900 liters are intended for cleaning surfaces from rust, old paint and other deposits, as well as for surface preparation before applying anti-corrosion coatings.
Contact with supplier

Caina chambers sandblasting abrasive blasting - 10847

ООО «Энерготех», г.Барнаул
Russia
USD 1027.68/pcs 1027.68
For installation in workshops and closed rooms, we produce blast cleaning chambers of the KSO® trademark. The basic are injection chambers. On their basis, chambers are produced with a monoblock design, consisting of an abrasive blasting cleaning box and a built-in block of filter elements with an exhaust fan. The KSO camera turns out to be self-sufficient and does not require the connection of any additional nodes. It is convenient to operate and economical to use. Emissions of dust and other harmful substances comply with the MPE standards. Additionally, we can supply pneumatic, air-mechanical separation devices, abrasive material transportation systems - augers, elevators and conveyors of various designs in a set with a chamber.
Contact with supplier

Automatic shot blasting lines from the manufacturer - 10845

ООО «Энерготех», г.Барнаул
Russia
USD 10276.82/pcs 10276.82
Shot blasting lines with high performance automatically clean pipes, rolled metal products, castings, large-sized metal structures from mill scale and rust to a cleanliness class SA 3 before applying various protective coatings. This series of equipment can be divided into 5 main groups: pipe cleaning plants, rolled metal cleaning plants, casting cleaning plants, belt hearth plants, rotary table plants.
Contact with supplier

Foundry mini-plant for the production of linear fittings - 10838

ООО «Энерготех», г.Барнаул
Russia
USD 7422.15/pcs 7422.15
Foundry mini-plant for the production of linear fittings from non-ferrous scrap waste We produce a mini-foundry for the production of power line fittings, self-supporting insulated wire, cable and panel fittings by casting from non-ferrous scrap waste. Delivery set: reflective oven; crucible furnace; chill machine; chill molds (forms of products you need). The furnaces operate on any type of energy: low / high pressure gas, bottled gas (1 cylinder is enough for 15-20 hours of operation), electricity (30 kW / h during acceleration, no more than 15 kW in operating mode), diesel fuel, spent fuel, etc. etc. when installing the appropriate burner (to be discussed separately). Chillers can be: Single-position (open the shape to one side) for products without back corners. Two or more positional ones - opening up / down, etc. with complex forms. Power consumption 2.5 kW / h. This efficiency is achieved by the fact that the oven is turned on only when the mold is opened and closed. Kokili (casting molds) - molds are made on NB the entire series, NKK - the entire range, PA - the entire range, NZ 2-7, hardware clamps, cable fittings, etc. - the list is not limited.
Contact with supplier

Frying cabinets for catering organizations - 10831

ООО «Энерготех», г.Барнаул
Russia
USD 330.23/pcs 330.23
Frying cabinets for catering are offered in one-, two- and three-section versions. They are used for industrial cooking. Made of stainless steel.
Contact with supplier
About company
Categories: Address:
CCTV Cameras, Measuring instruments, Kitchen supplies, Machinery, Industrial parts & tools, Safety & ecology, Products and equipment for industrial ecology, Oil & gas equipment and machinery, Oil & gas processing machinery, Pumps, compressors for oil & gas, Road Construction Machines & Equipments, Road Surface, Road Construction, Food & agro machinery, equipment, Retail Store Equipments, Industrial Cleaning and Sanitation Machines, Industrial machinery parts, Refrigeration Equipments, Warehouse and handling equipment, Food Machinery,Equipments, Food additives and ingredients machines, Livestock machinery, equipments, Weighing & control equipment, Industrial Equipments and Machines, Other equipments and machines, Elevator equipment, Machines for printing products, Electrical equipment, Woodworking Machinery, Industrial Equipment Parts, Mechanical Parts, Tire Industry Machines, Water heating boilers, Machine Tool Equipment and Parts, Storage tanks, Equipment for cafes and restaurants, Agriculture Machinery & Equipment, Harvesting Machines & Equipments, Fruit & Vegetable Machines & Equipments, Sorting and Transportation Machines & Equipments, Construction Machinery & Equipment, Construction Machinery, Construction equipment, Construction Materials, Rebar, Reinforced concrete products, Car tire, Vehicles & parts, Auto spare parts, Machinery & equipment, Metallurgy, Foundry Machinery, Metal Processing Machinery, Metal Structures, Electrical equipment and parts, Wires, Cables, Cable Assemblies Russia, пр. Калинина, 24в

EnergoTech LLC -15 years is a manufacturer and supplier of high-quality woodworking equipment.

The beginning of activity is the production of band saws that meet modern requirements for productivity and most importantly for the quality of products. To date, a team of professionals has formed that has exceeded 100 people, there are several workshops, warehouses, a separate head office and extensive experience in producing a whole gamut (more than 45 items) of modern woodworking equipment.

Serial production and extensive work experience allow EnergoTech LLC to supply reliable, trouble-free equipment at reasonable prices. The plant is actively expanding its network of representative offices and dealers in Russia and neighboring countries.

EnergoTech LLC is engaged in the production of Altai-3 brand woodworking machines. Altai machines have proven themselves in the market as reliable, high-performance, maximally meeting all requirements.

Being not only a manufacturer and supplier of Altai equipment, but also a developer for sawmills, our company offers really favorable conditions for the sale of woodworking equipment , and for its warranty and post-warranty service.

Contact supplier
Request
Request
Contacts
Supplier:
"Узлегпром"
Write to us, we are online!