ООО «Энерготех», г.Барнаул

We produce refrigerated display cases and counters in various configurations - with a refrigerated bathtub, countertop, etc. and are designed for operational storage, display and distribution of cold snacks and chilled drinks to the consumer. Each cooling module is equipped with a temperature control system and built-in lighting, and refrigerated display cases additionally have a built-in air circulation system. Depending on the model, showcases and modules are equipped with guides for trays, neutral shelves and doors with a convenient opening system.

Bain-marie is an equipment designed for preservation and prompt distribution of hot dishes. We produce both bain-marie for first or second courses, as well as universal steam / combined bain-marie and modules for serving hot drinks or dishes. Depending on the model, the food warmers are equipped with hotplates with thermostats, sets of gastronorm containers, illuminated shelves, guides for trays, etc. The food warmers of our production are made of stainless steel and have all the necessary documents.

Frying ovens for canteens and cafes of our production are made taking into account all the requirements and standards of food equipment and meet the most stringent quality standards. Frying cabinet options: - one-section; - two-section; - three-section. All models, regardless of the number of sections, are equipped with upper and lower heating elements with separate temperature control and a system that protects against overheating, and the heat removal system protects the outer surfaces from overheating. Operating temperature range: 20 to 270 degrees C.

Copper cooking boiler 28-2A (with a stirrer) is designed for cooking and boiling of raw materials used in the production of caramel, toffee, jelly masses, marmalade and various fillings of soft candies. It is used in the confectionery industry, in specialized enterprises and in the shops of confectionery factories. The Dagprodmash plant produces cooking boilers with a one-piece forged copper bowl, as well as stainless steel. Cooking boilers are used in confectionery factories in the production of jelly, soft candies. Designed for evaporation of raw materials when heated in the process of making jelly, toffee, candy fillings. Cooking boilers, depending on the model, are equipped with a mixing or tilting device.

Tipping boiler MZ-2S-244b (with a stirrer) wholesale from the producer of JSC Dagprodmash. We invite dealers. Designed for cooking and evaporation of vegetable and fruit masses in the production of canned food, cereal products, concentrates, for boiling raw materials under temperature exposure. It is used in the canning industry. The Dagprodmash plant produces cooking boilers with a one-piece forged copper bowl, as well as stainless steel. Cooking boilers, depending on the model, are equipped with a mixing or tilting device. We are manufacturers of boilers, cooking and vacuum apparatus, production lines for the food industry - confectionery, canning, cheese making. Our products are manufactured from stainless steel. Some types of digesters (28-2A and D9-41A) are endowed with a copper bowl, which are made by hand.

Testing machines (tensile) RMG-MG4 - for testing samples of metals, reinforcing steel, sheet and round rolled products in tension / compression / bending. Modifications: for 500/300/200/100/50 kN. Normative documentation for testing: GOSTs 1497, 10922, 12004, 14019, 6996, etc. Design options: RMG-500MG4 are made in the form of two parts - a loading unit and a control cabinet. The rest of the modifications are monoblock. Work - from the network 220V / 50Hz. RMG-200MG4, RMG-300MG4 and RMG-500MG4 are supplied with a control panel for gripper drives (included in the price). The user enters the test data on the monitor panel in a dialogue mode, the data obtained during the test is stored in the machine's memory and can be transferred to a computer via a USB port.

The IPS-MG4 concrete strength meters are designed for quick determination of surface defects of concrete blocks, brickwork, as well as for express-check of concrete products in production. The working part of the device (sclerometer) is made in the form of a “pistol” with a striker resting on three points. Depending on the needs of customers, modifications IPS-MG4.01 (for reinforced concrete plants), IPS-MG4.03 and IPS-MG4.04 (for testing laboratories) are produced. The latest model, IPS-MG4.04, is a sclerometer with a built-in electronic unit (rotary); such a device is convenient to hold in one hand.

Dynamometers electronic DM-MG4 are certified as standards of the 2nd category and are used for checking presses and testing machines in metrological centers. In scientific and testing laboratories, universities they are used in test benches - where an accurate measurement of force is required. The devices consist of an electronic unit and a sensor, a feature of the dynamometers are two modes of power supply: autonomous (batteries) and a 220 V network. The electronic unit has a large backlit display, the results are displayed on the screen and stored in the device's memory. The PC communication program transfers data to the PC via the USB port. It is not necessary to send the device to the manufacturer for updating - there is a program for remote updating of service functions.

The impeller pump can be used to pump a wide range of liquids in the chemical, cosmetic, pharmaceutical, dairy, canning, confectionery, oil and fat industries, etc. The impeller pump is designed for pumping thick, liquid masses with a viscosity of up to 20 Pas with permissible inclusion of air and solid particles. Due to the positive displacement principle, the pump can be used as a metering unit. Advantages of the impeller pump: Wide range of applications in various fields Can be used as a dispenser Pumping liquids, emulsions, suspensions containing small particles, such as pieces of berries, while maintaining their structure The flow path is made of high quality stainless steel, and the impeller can be made of both conventional and oil-free materials Fast, simple and inexpensive maintenance High performance in a small footprint

Tornado wheel washers operate in automatic mode and are intended for car service enterprises. Equipped with water heating function (optional). The wheels are installed in a vertical position, which eliminates the possibility of damage. Does not require connection to water supply and sewerage. Technokar LLC offers a choice of 3 models.

Pendulum tenoning machines DOS-ShR (50-500) for the production of box tenons. Designed for cutting rectangular spikes in plywood, wood, chipboard, fiberboard, plastic, etc. in the manufacture of containers, hives, boxes, furniture, elements of corner joints of wooden structures, etc. The thorns to be cut are rectangular. The processing method is step by step. The processing width in one stroke of the unit is from 50mm (DOS-ShR-50) to 500mm (DOS-ShR-500). The greatest length of the workpiece - up to 3000mm The maximum length of the workpiece is not limited. Desktop / floor version, 220 / 380v

The OFP-800 (300-1200) etching printing press is made for use in art printing. To eliminate distortions during printing, two clamps are installed along the edges of the rollers. The machine is equipped with a stand with wheels. During transportation, the stand is removed to reduce the size of the equipment. When assembling, exclusively Russian components are used, which increases the reliability of the machine and, if necessary, facilitates repair Only sealed bearings of increased accuracy and durability; To create optimal pressing pressure when printing on various materials and to eliminate possible distortions during printing, instead of one central clamp, two screw clamps are installed at the edges of the shafts; A gear reducer of increased load and reliability is designed to create increased pressure for special types of printing (so-called intaglio printing); Electromechanical feed ensures smooth running of the taler and high productivity of the machine. It can be equipped with a frequency regulator to ensure shuttle printing and select the optimal printing speed; High-precision balanced shafts that provide an optimal contact area when printing on various materials; Collapsible stand to reduce the size of the machine during transportation; The stand can be equipped with wheels for easy movement of the machine to any place convenient for work; - Only domestic widespread materials and components are used to ensure increased reliability and maintainability.