ООО «Энерготех», г.Барнаул

Not approved icon Not verified supplier
Make a safe deal with this supplier. Apply
USD 1313.15/pcs 1313.15
The mini-band sawmill is designed to cut wood of any species, and also to dissolve logs. As a result, you will receive ready-made timber, sleepers, slats, edged and unedged boards, veneer and other sawn timber. The sawmill works in a horizontal area, lifting is carried out electromechanically. The horizontal mini-sawmill has the following advantages in operation: High quality lumber, low waste. Quick installation of the product, setting the required parameters. High-quality and precise cutting of wood of any degree of hardness. Does not require a foundation, therefore it is easy to install and move.
USD 1849.14/pcs 1849.14
1. The length of the lower horizontal part is 1000 mm, the inclined part is 5950mm, the upper horizontal part is 500mm. 2. The total width of the belt is 165 mm, the distance between the sidewalls is 65 mm. 3. Height from floor to working surface, initial 200mm, final 2805mm 4. The angle of inclination is no more than 26 degrees 5. Supporting the upper branch of the metal sheet 2mm thick. 6. PVC tape Paris with a thickness of 2.4 mm, food grade total width 165 mm, indent at the edges by 20 mm, corrugated board 40 mm high, partitions 40 mm high, 150 mm pitch, 65 mm long. 7. Drum diameter 120mm 8. Geared motor NMRV040-90ob-22Nm-0.25kW / 900-380V-IP54. 9. Nominal speed 0.578m / sec. 10. Drive - belt drive. 11. Stainless steel hopper with a volume of 200-300 liters. Hopper height from floor 1000mm 12. The cost of the conveyor is calculated based on a load of 0.5 kg / rm. 13. There is no reverse 14. Start-stop button. 15. Speed ​​control by frequency converter 16. Stationary 17. All metal parts of the structure are made of black painted steel (except for the hopper). 18. The conveyor is delivered in a disassembled form: the supports are separate from the carrying part. 19. Vibrator MVSI 3/1000-S02
USD 17128.03/pcs 17128.03
Mills of medium and fine grinding, air classifiers are used for crushing rocks or plant raw materials, for separating bulk substances by particle size.
USD 3311.42/pcs 3311.42
Disintegrators for coarse and medium grinding are designed to obtain powder with particles of 0-0.2 mm. It is used with dry and wet substances depending on the model. Plant "TEKHPRIBOR" manufactures 5 models of this equipment with a capacity of up to 5 cubic meters per hour.
USD 1372.53/pcs 1372.53
Conveyors, feeders and augers are mechanisms for transporting material. Productivity 0.01 - 78 cubic meters per hour. Plant "TEKHPRIBOR" offers: Screw conveyors, steel, vertical, spiral and others Flexible screws, variable feed screw feeders Sluice gates, prescription microdispensers and other equipment.
USD 3705.36/pcs 3705.36
The construction drum sand seeder is designed to get rid of building mixes from coarse impurities and break into smaller fractions. Productivity of the device: 60-75 cubic meters / h. Weight: 950 kg. Dimensions: 313 x 145.5 x 181 cm.
USD 1592.91/pcs 1592.91
The confectionery dough-settling machine Slavyanka-3 is intended for settling products from shortcrust, custard, curd and biscuit dough. Slavyanka-3 makes it possible to produce a wide range of biscuits due to the use of various types of nozzles and shaped dies. The raw material is loaded into the loading hopper and enters the working chamber, where by means of the piston the mass is pushed through the hoses into the dies (nozzles) and deposited on the baking sheet. At the same time, the piston with the cylinder makes oscillatory movements "up and down", which distinguishes this model from the previous MKT series dough-depositing machines (MKT-120). This feature of the machine eliminates stress on the hoses (they remain stationary), which increases the reliability and service life of the machine.
USD 2455.02/pcs 2455.02
Confectionery dough-settling machine Prima-6 is designed for settling products from shortcrust, custard, curd dough. Works in automatic mode, the number of nozzles is from 6 to 8 pieces. The dough depositor machine allows you to produce a wide range of biscuits due to the use of various types of attachments and shaped dies. The jigging machine consists of a loading hopper, a lifting mechanism, a feed table and an electric drive. The hopper is used to load the machine with raw materials (dough, all kinds of fillings) and is a chamber inside which the piston moves. A row of nozzles is located at the bottom of the loading hopper. The piston moves vertically downward translationally and injects the raw material. The molded product comes out through the nozzles onto the feeding table on the baking sheet. The baking sheet is pushed towards itself by hand. The jigging machine is driven by an electric motor. The model provides for adjustment of the weight and height of the product.
USD 6702.77/pcs 6702.77
The wood waste pelleting line is designed for the production of fuel pellets (pellets). Raw materials: wood waste, chips, slabs, balance The resulting product: pellets with a diameter of 6-8 mm, a length of 10-25 mm The wood waste pelleting line contains all the areas necessary for the process, ensuring: Drying of raw materials Shredding Moisturizing Pressing Cooling and screening Dosing and packaging
USD 5.71/pcs 5.71
We supply a full range of accessories for electric drives (Tula) in general industrial and explosion-proof design. Quality production, new coatings, hardening.
USD 161574.39/pcs 161574.39
Alfa-SPK offers complex automatic lines for the processing of industrial rubber waste. The main activity is the processing of tires that are not suitable for further operation, the processing of tires into crumb with the separation of metal cord and textile threads. The end result of the processing of automobile tires and rubber is rubber crumb, free from foreign inclusions and divided into three fractions: 3-5mm, 1-3mm, 0.1-1mm. The clogging factor of crumb rubber is no more than 3%. Depending on your desire to produce final products from rubber crumb, we can offer you a press for the production of floor coverings (paving slabs) from rubber crumb, using the temperature extrusion method. Line for processing tires ATR500 line capacity of 500 kg / hour of cleaned rubber crumb broken into fractions, 100 kg / hour of crushed refined textile cord, 150 kg / hour of crushed refined metal cord. Requirements for the room 300m2, height 6 meters, width 10 meters, length 30 meters. Power consumption of the line is 150 kW. The maximum size of used car tires is 22.5. Operating temperature range from -20 to + 40C. The number of required personnel is 4 people. The line has a fully automatic cycle.
USD 2854.67/pcs 2854.67
TShPm furnaces with heat output of 0.8, 1.5, 2.0, 2.5 MW, manufactured by OOO PK Altayenergomash, are used for burning bituminous and brown coals. They are completed with steam boilers with a capacity of 1 to 3 t / h and hot water boilers with a heating capacity of 0.63 MW Installed in boiler houses equipped with a fuel supply system to the bunker and an ash removal system.
About company
Categories: Address:
CCTV Cameras, Measuring instruments, Kitchen supplies, Machinery, Industrial parts & tools, Safety & ecology, Products and equipment for industrial ecology, Oil & gas equipment and machinery, Oil & gas processing machinery, Pumps, compressors for oil & gas, Road Construction Machines & Equipments, Road Surface, Road Construction, Food & agro machinery, equipment, Retail Store Equipments, Industrial Cleaning and Sanitation Machines, Industrial machinery parts, Refrigeration Equipments, Warehouse and handling equipment, Food Machinery,Equipments, Food additives and ingredients machines, Livestock machinery, equipments, Weighing & control equipment, Industrial Equipments and Machines, Other equipments and machines, Elevator equipment, Machines for printing products, Electrical equipment, Woodworking Machinery, Industrial Equipment Parts, Mechanical Parts, Tire Industry Machines, Water heating boilers, Machine Tool Equipment and Parts, Storage tanks, Equipment for cafes and restaurants, Agriculture Machinery & Equipment, Harvesting Machines & Equipments, Fruit & Vegetable Machines & Equipments, Sorting and Transportation Machines & Equipments, Construction Machinery & Equipment, Construction Machinery, Construction equipment, Construction Materials, Rebar, Reinforced concrete products, Car tire, Vehicles & parts, Auto spare parts, Machinery & equipment, Metallurgy, Foundry Machinery, Metal Processing Machinery, Metal Structures, Electrical equipment and parts, Wires, Cables, Cable Assemblies Russia, пр. Калинина, 24в

EnergoTech LLC -15 years is a manufacturer and supplier of high-quality woodworking equipment.

The beginning of activity is the production of band saws that meet modern requirements for productivity and most importantly for the quality of products. To date, a team of professionals has formed that has exceeded 100 people, there are several workshops, warehouses, a separate head office and extensive experience in producing a whole gamut (more than 45 items) of modern woodworking equipment.

Serial production and extensive work experience allow EnergoTech LLC to supply reliable, trouble-free equipment at reasonable prices. The plant is actively expanding its network of representative offices and dealers in Russia and neighboring countries.

EnergoTech LLC is engaged in the production of Altai-3 brand woodworking machines. Altai machines have proven themselves in the market as reliable, high-performance, maximally meeting all requirements.

Being not only a manufacturer and supplier of Altai equipment, but also a developer for sawmills, our company offers really favorable conditions for the sale of woodworking equipment , and for its warranty and post-warranty service.

Contact supplier
Supplier:
"Узлегпром"
Write to us, we are online!