All Industrial Equipments and Machines suppliers from Kazakhstan

Separating propylene and propane by rectification is difficult due to the small difference in boiling points of the two components. However, rectification is absolutely necessary, although it requires the use of columns with a high reflux ratio and a large number of trays. The low boiling fraction components can be pre-separated in a separate column using propylene as a refrigerant to cool the reflux condenser, after which the final separation of propane and propylene can be performed in a large column, best divided into two sections, operating at ambient temperature.

Filters are devices for purifying liquid and gaseous substances from impurities and suspended particles. Filters are widely used in oil refining, gas, petrochemical industries, utilities, scientific research and technical laboratories. Liquid mesh filters for SZD pipelines and FSZh liquid mesh filters are actively used in industry. Mud collectors are widely used in public utilities.

Separator - an apparatus that allows you to separate the product into fractions with different characteristics. This equipment is actively used in oil fields and oil refineries. Mesh gas separator GS, oil and gas separator NGS, oil and gas separator with water discharge NGSV, flare separator FS are the main types of separators that are used in the oil industry. The devices differ in purpose, scope, operating conditions and technical characteristics: volume, nominal pressure, design temperature.

Hopper

Diesel fuel vessel

Vertical steel tanks - designed for receiving, storing, dispensing oil products and water, as well as other liquids, in various climatic conditions

Oil and gas separator oil and gas equipment that is used for degassing non-foamy oil during the extraction process and removing associated gas from it.

The travel heater is designed for heating oil products, oil emulsions, viscous oil during transportation through pipelines, at oil fields and oil treatment plants.

Sump is a storage tank used to collect liquids, as well as for their primary mechanical cleaning. Sediment tanks are used both on an industrial scale and in individual farms. At the stage of primary treatment, when sedimentation tanks are mainly used, mechanical impurities and suspended substances are extracted from the liquid under the action of gravitational forces, and biological treatment processes begin; when using the settler as a biocoagulator, fine and colloidal impurities are deposited, and sorption processes occur on the sludge particles. Oil sump is a special equipment designed to separate oil-water emulsion. In the separation process, oil is obtained, which is then collected, and formation water, which is discharged. Mechanical impurities and salts are removed from the raw material together with formation waters. Some oil settler designs also allow the removal of dissolved gas.

The company Market LLP offers partners the start of mass production with air cooling based on Danfoss components. We can solve complex problems associated with the difficulty of installation, the geometry of the machine and capacitor blocks. Disassembled delivery possible. We provide installation and installation supervision. We provide an extended warranty of up to 3 years. SUPERMARKET everything for prom cold

Refrigeration units for outdoor installation Split Ice Box systems are designed to create and maintain a temperature regime inside a refrigerating (freezing) chamber and consist of two parts: a condensing unit outside and an evaporator - inside the chamber, connected by a pipeline. The unit is charged with R404A refrigerant (R507 and R407C refrigerants can also be used). Ice Box C The outdoor and indoor units can be located at some distance from each other. Due to this, split systems can be used for cameras equipped in rooms with wall thickness and ceiling heights that do not allow the installation of monoblocks. Also, split systems are resistant to any atmospheric conditions and can be installed both indoors and outdoors. The electronic control unit of the split-system is installed on the electrical panel, maintains the set temperature in the cooled volume, and turns on the defrosting mode of the evaporator. There are two types of split systems: Ice Box Blue and Ice Box Green - low and medium temperature, respectively. Ice Box C Complete set Ice Box split systems are supplied in the following set: condensing unit evaporator passport (operation manual) Compressors and other components from leading European manufacturers are used in split systems. Produced on the basis of hermetic and semi-hermetic compressors.

Main Manufacturer Makita Power factor 1.0 Engine Fuel tank volume 6.0 (l) Overall dimensions Weight 55.0 (kg) Additional characteristics Weight: 55 kg Power: 3.5 kW Manufacturer: Makita Dimensions (LxWxH): 683x492x485 Fuel tank volume: 6 liters. Supply voltage: 220 V Oil tank volume: 1.2L. Noise level: 70 dB (A) Rated frequency: 50Hz Duty cycle: 3 hours More details:

Manufacturer Cameo Engine Fuel tank volume 25.0 (l) Additional characteristics Weight: 91kg Power: 6.5kW Manufacturer: Cameo Dimensions (LxWxH): 760x610x700 mm Engine volume: 420 cm? Fuel tank capacity: 25 l. Engine type: petrol 4-stroke; Output voltage: 220 V; 50 Hz Start type: manual / electric starter More details: