All Industrial Equipments and Machines suppliers from Russia

Double Head PVC Profile Cutting Machine With a retractable saw and touch computer ⠀ - Designed for 2-sided precision cutting 45 ° - 90 ° - Cuts PVC and Aluminum Profiles 45 ° - 90 ° - Intended for 2-sided precision cutting and intermediate degrees 45 ° - 90 ° - Ability to control manually 45 ° - 90 ° - works automatically - Control System with Touch Panel - Saw with a diameter of 450 mm - You can run only one head or both heads at a time - Enter the desired size in the digital panel - Memory on 20 measurements Each model comes with instructions. The model is designed in such a way that it is completely safe from accidents. ⠀ PS / Touch Panel: Calculator & Notebooks Available on computer Design in accordance with CE

Laser interferometer for determining the magnitude, sign and direction of the main axes of stress. To register the measurement of residual stresses by recording the fields of small displacements in the studied area. The method is based on the elastic load arising in the local area of the investigated product by drilling through a hole through a small diameter and depth. The accuracy of determining the strain by this method reaches ± 130 nm; these are strains caused by low residual stresses. The laser interferometry method allows you to obtain accurate data on the magnitude, sign and direction of the main stress axes in 10 ... 15 min (in contrast to the trepanation method, where the period is calculated in weeks). The interferometer consists of: • An aluminum plate 10 mm thick, on which all optical elements are installed; • The bases with three support; • The mechanism of rotation of the optical axis; • A semiconductor laser emitting light in the green part of the spectrum; • A device that creates a divergent light flux; • Dividing mirror; • Digital video cameras with a lens; • Band-pass filter; • External protective casing; • Three permanent magnets on flexible bases. The interferometer must be rigidly attached to the test surface. Therefore, its supports have sharp carbide endings, which ensure penetration into the investigated surface. The introduction of the supports into the surface occurs, first of all, due to the attractive force of permanent magnets, as well as due to the mass of the device. All optical elements - laser, video camera with lens, dividing mirror, etc. are located in one optical plane, on the plate, which can be fixed at an angle of 90 or 45 degrees to the plane of the investigated surface. The semiconductor laser of the interferometer can be equipped with a separate power supply unit from the 220V network or a set of 5V batteries. The digital camcorder is equipped with a cable with a USB connector for connecting to a computer.

For measuring, indicating and visualizing mechanical (technological, residual), stresses in the base metal, welding seams and the heat-affected zone with the provision of information on the existence of conditions for the development of fractures in the studied area of the control object. For measuring, indicating and visualizing mechanical (technological, residual) stresses in the base metal, welds and the heat-affected zone with the provision of information on the presence of conditions for the development of fractures in the studied zone. • Layer-by-layer visualization of the stress state of the surface layers of the base metal. • Identification of dangerous and incipient defects that create a concentration of mechanical stresses. • Determining the conditions for the development of damage in the study area. The operator moves the sensor of the device step by step over the surface of the product area, the result is recorded electronically. After computer processing, cartograms of the distribution of mechanical stresses, stress concentration zones, etc. are built and displayed on the display. The degree of danger and the presence of conditions for the destruction of the section of the test product with the identified sections of KMN (concentration of mechanical stresses), KNN and gradients RGMN (the difference of the main mechanical stresses) is estimated by the common methodology (SP, RD, etc.). • Information is extracted in layers below the level of hardening from depths of 1-20 mm; • It is not necessary to clean the surface of the test object, as when working with acoustic voltage meters; • The control area is from 30x30 mm when measuring mechanical stresses and 80x80mm when building cartograms of the Russian State Standard of Materials; • Readiness for work no more than 0.5 min .; • Measurement time at one point, on average, 1 sec. STRESSVISION Expert v. 2.013 Minimum scanning area, mm 90 x 90 The number of scan nodes, min-max, pcs 25 - 93378 The maximum number of scanning zones, pcs 3700 Consumed current, A 0.25 Operating temperature range, ° C from - 10 to +55 Dimensions of the measuring unit, mm 87 x 227 x 167 Weight 1.8 kg The device is delivered in a shock-resistant case on wheels and with a retractable handle for convenient transportation. Six locks, a valve for balancing pressure during air travel. Inside: damping material with compartments for all components of the device.

To measure and reduce residual mechanical stresses in metal structures after welding. TECHNOLOGICAL COMPLEX "ANTISTRESS 1" The complex includes: Technological complex “VTU-02MP” Mechanical stress scanner "STRESSVISION ANTISTRESS" TECHNOLOGICAL COMPLEX "ANTISTRESS 2" The complex includes: Technological complex "Bumblebee-1" Mechanical stress scanner "STRESSVISION ANTISTRESS" TECHNOLOGICAL COMPLEX "ANTISTRESS 3" The complex includes: Technological complex "Bumblebee-1" Technological complex “VTU-02MP” Mechanical stress scanner "STRESSVISION ANTISTRESS"

To reduce residual mechanical stresses by the method of low-frequency vibration processing (HBO) at resonant frequencies. The complex allows vibration processing of large parts at a resonant frequency. As a result, redistribution of internal stresses occurs, the product geometry is leveled, stress concentrators, as sources of future destruction of the metal, go away. Vibration processing makes it possible to avoid costly heat treatment with similar results. The workpiece or metal structure is placed on the vibration damper. A vibration exciter with adjustable imbalance is installed on the part, which allows you to determine the necessary processing parameters. Vibration processing lasts 15 to 30 minutes. Control measurements with the Stressvision Expert V.2.013 device demonstrate that mechanical stresses are removed and the metal is evenly stabilized. The device operates in three modes: manual, automatic run and automatic. During an automatic run, the operator determines the ranges of resonant frequencies. By selecting and setting the resonant frequency, the operator starts the automatic mode, during which the device supports operation at the set frequency. The processing time at a resonance of 15-20 minutes. Comparison of the most common methods for eliminating residual welding stresses

For hardening of welded joints by impact deformation at ultrasonic frequency. Installation Bumblebee allows you to directly process the weld zone by impact deformation at the ultrasonic frequency. This method can significantly reduce the level of residual technological stresses, and in some cases allows you to abandon post-weld heat treatment. Complex features • Reduction of residual welding stresses due to the formation of compressive surface stresses • Reducing the likelihood of defects • Formation of a surface hardening layer with resistance to cracking. Features and Benefits • Compactness and mobility • Versatility Can be used for structures of various composition and metal structure • Profitability Significant reduction in energy, time and labor costs compared to other methods of reducing mechanical stress • There is no effect on the chemical composition and structure of the metal • Environmental Safety.

Open type high temperature unit without condenser based on a Bitzer reciprocating compressor Case design: The frame is a supporting and supporting element of the unit design, made of steel profile, has sufficient rigidity. It is painted with high-quality anticorrosion paint, resistant to climatic environmental factors. Provides the ability to mount the unit to the foundation, as well as vibration mounts and convenient access for maintenance. Compressors: Semi-hermetic piston compressor Bitzer, charged with refrigerating oil and equipped with a sight glass. The compressor crankcase is equipped with an oil heater. The compressor motor is equipped with integrated overheating protection for the windings. An oil pump is integrated in the compressor, to which an oil pressure switch is connected. The compressor is equipped with shut-off valves and a dual pressure switch on the refrigerant suction and discharge lines. Control unit: The unit includes an input switch, phase control relay, compressor and fan magnetic starters, an emergency switch, compressor restart restart delay indicators, network and compressor operation indicators, network failure indicators, pressure alarms, automatic high and low protection relays pressure, glycerin pressure gauges of high and low pressure. Refrigeration circuit: Discharge line - discharge manifold, discharge pipe, non-return valves (on multi-compressor units), shut-off valve; liquid line - a linear receiver with a safety valve and Rotalock valves at the inlet and outlet, a filter drier, a sight glass with a humidity indicator, a shut-off valve; suction line - insulated intake manifold, mechanical filter, shut-off valve. Oil circuit: Oil separator, oil filter, safety valve, sight glass, differential oil pressure differential switch (if the compressor is equipped with an oil pump).

Equipment for the production of cotton gloves finished shop Khabarovsk 25 pcs 10 class machines 65 pcs 7.5 class machines crocodile for applying PVC 2 pcs Overlock modern 1 pc The machine for a pile 1 piece 5 pcs turning machine Compressor Italy 1 pc Compressor 3 pcs All machines manufactured in China 2009-2012 g

1. DF1600 Electromechanical roll for reels, 1 pc. 2. Vacuum and gimbal corrugated press, 1 pc. 3. The unit of longitudinal and transverse cutting, 1 pc. 4. Semi-automatic 3-color flexo printing line with a slotter and rotor YFQ2200, 1 pc. 5. Rulevochno-cutting machine with thin knives to create the shape of the boxes BFY2000, 1 pc. 6. Semi-automatic laminating machine DZF1300-E, 1 pc. 7. Automatic ribbing and cutting machine, 1 pc. 8. Semi-automatic gluing machine 2600, 1 pc. 8. Glue-spreading machine BJ2000, 1 pc. 10. Semi-automatic machine for gluing boxes ZXJ-2600, 1 pc. 11. Mini-slotter (grate) BL, 1 pc. to be in Khabarovsk

Double-column automatic band saw B-33 The machine is directly from the manufacturer. Full control during production, testing, packaging and delivery. The fastest and most reliable delivery route. An updated model that replaced the CNC saws H-300HA and GZK4233 from the famous Julihuang (JLH) factory. Specifications: ·          1 Maximum cutting range (mm)   330 × 330 × 330 (W x H) ·          2 Sawing speed (third gear) 10-80 m / min ·          3 Band saw blade specifications (length * width * thickness) 4115 * 34 * 1.1 mm ·          4 Feed rate Hydraulic infinitely variable speed control ·          5 Main motor power 5.0 kW ·          6 Hydraulic motor power 0.75 kW ·          7 Volume of hydraulic oil tank 70 l ·          8 Cooling pump motor power 0.75 kW ·          9 Coolant tank volume 100 l ·          10 Main drive type Worm gear ·          11 Workbench height 500 mm ·          12 Main drive mode Worm gear ·          13 Clamping method Hydraulic clamping ·          14 Belt tensioning method hydraulic ·          15 Method of cleaning from sawdust Wire brush ·          16 Dimensions of base unit (LxWxH) Approx.2250 × 1550 × 2300mm ·          17 Weight   1750 kg * The price is indicated including VAT 20% and delivery to St. Petersburg.   On the issues of order completion, the final cost, specification of the production time, as well as on the production of products to order - write and call, we will be glad to cooperate with you!

Two-column automatic band saw H-400HA. The machine is directly from the manufacturer. Full control during production, testing, packaging and delivery. The fastest and most reliable delivery route. Specifications: ·          1 Maximum cutting range (mm) 400 × 400 × 400 (W x H) ·          2 Cutting speed (third gear) 20-90 m / min ·          3 Band saw blade specifications (length * width * thickness) 4800 * 34 * 1.1 mm ·          4 Feed rate Hydraulic infinitely variable speed control ·          5 Main motor power 4.0 kW ·          6 Hydraulic motor power 1.5 kW ·          7 Volume of hydraulic oil tank 70 l ·          8 Cooling pump motor power 0.07 kW ·          9 Coolant tank volume 80 l ·          10 Main drive type Worm gear ·          11 Workbench height 500 mm ·          12 Main drive mode Worm gear ·          13 Clamping method Hydraulic clamping ·          14 Belt tensioning method hydraulic ·          15 Method of cleaning from sawdust Wire brush ·          16 Dimensions of base unit (LxWxH) Approx.2600 × 1600 × 2400mm ·          17 Weight   2300 kg On the issues of order completion, the final cost, clarification of the production time, as well as on the production of products to order - write and call, we will be glad to cooperate with you!

Fixtures LED console series STIK & nbsp; are made in a modern stylish waterproof aluminum case. Complete with corrosion-resistant stainless steel bracket & nbsp; for console installation. As a console you can & nbsp; use & nbsp; separately purchased & nbsp; L-shaped bracket . & nbsp; luminaires with KSS of a wide type - adjustable, provides the ability to change the angle of inclination when installed in the range of 0 ... 30º; with a resolution of 5 & ordm ;. B LEDs from OSRAM and CREE are used as a light source. As a current source - & nbsp; proven and reliable drivers & nbsp; Russian-made with galvanic isolation, & nbsp; active power corrector and protection from 380 V. Specifications Supply voltage & nbsp; 176 ... 264 V, 50 Hz Power factor & nbsp; & gt; 0.95 Class of protection against electrical shock. shock & nbsp; I Color temperature & nbsp; 4000/5000 K Color rendering index, CRI & nbsp; 80 Ripple factor & nbsp; & lt; 1% Bore diameter & nbsp; 50mm Step. protection & nbsp; IP65 Operating temperature & nbsp; - 40 ... + 40 & ordm; C Resource & nbsp; & gt; 50,000 hrs Diffuser & nbsp; Transparent

Determination of ozone concentration parameters. Measurement of ozone concentration in water is carried out using one of the following methods: determination of the redox potential; photometry; application of amperometric sensors; titration. Instruments for measuring ozone in air use the following methods during operation: use of substances that chemically interact with ozone or its decomposition products; photometry; determination of the resistance of a number of metal oxides, etc. A specific method for measuring the concentration of ozone in water or air is determined by ease of use, frequency of reading, financial capabilities of the enterprise and a number of other factors.

APPLICATION OF OZONATORS STORAGE OF VEGETABLES AND FRUITS Use of ozone in the refrigerated storage of fruits and vegetables AGRICULTURE AND ANIMAL HORIZATION Disinfection of the air in poultry farming Stimulation of growth and vital activity of plants and animals Beekeeping - combating ascopherosis Plant storage and ozonizers quality food, grain, etc. FOOD INDUSTRY Disinfection of air, premises, equipment and products with ozone. Use of ozone in the meat and dairy industry. Disinfection of food production. CLEANING OF DRINKING WATER AND WASTE. Ozonation of water in a swimming pool. Ozonization of bottled water. aquarium and fish farming with ozone Wastewater treatment LAUNDRY, CLEANING, ODOR DISPOSAL Hotels, motels, country houses Leaning and car Optimizing laundry Eliminating stubborn odors of burning tobacco, paint and other petroleum products Car Ozone

HAAS SL-10 THE CNC turret turning center with a barfeeder. The G2R company offers high-quality equipment from the American manufacturer according to the following technical characteristics: Max. adjustable diameter • above the bed - 413 mm • above the carriage - 203 mm Processing range • Distance between centers - 419 mm • Maximum processed diameter - 279 mm • Maximum machining length - 356 mm (when turning between centers) • Maximum turning length with standard tools - 285 mm (with VDI revolver) Spindle • Maximum spindle rotation speed - up to 6000 rpm (stepless regulation) • Max. moment - 102 Nm at 1300 rpm • Spindle power, max. - 11.2 kW • Landing of the spindle - A2-5 • Three-jaw hydraulic chuck, 165 mm diameter • Processing of bars up to 44 mm in diameter • Spindle bore - 59 mm • Hole in the chuck hydraulic exhaust pipe - 46 mm Feed • Movement along the X axis - 159 mm • Movement along the Z axis - 356 mm • Force of movement along axes X and Z - 15 kN Connection and installation data • Power supply: 3 lbs. 400V, 50Hz • Compressed air consumption: 6.9 bar, 115 l / min • Machine dimensions: 2340 × 1400 × 1755 mm • Machine weight: 2495 kg Design features • Fully cast iron bed • Fully enclosed sealed safety guard • Servo motors for axes with direct torque transmission • Steel hardened bearing blocks of the guides • System of automatic lubrication of guides and ball screws • Ball screws with double fastening and pre-tensioned nut • Sliding design of the coolant tank We will find the necessary equipment for you, conduct all the necessary negotiations, prepare all legal documents, test, make a purchase, arrange delivery and installation, and provide warranty service. From laser head to milling center; from couplings - to complete equipment for industrial production - our company will help you save money and conduct a transaction in the USA without any complications. To contact us, write, call - we will be glad to cooperate with you!

The G2R company offers high-quality equipment from the American manufacturer according to the following technical characteristics: • Max. X-axis travel, mm 711 • Max. movement along the Y axis, mm 406 • Max. movement along the Z axis, mm 394 • Maximum distance from table to spindle end, mm 546 • Minimum distance from the table to the spindle end, mm 152 • Table length, mm 864 • Table width, mm 381 • Max. load on the table (equal distributed), kg 113 • Width of T-shaped grooves, mm 16 • Distance between T-shaped grooves, mm 125 • Spindle taper size 40 • Maximum spindle speed, rpm 10000, 12000 *, 15000 * • Max. spindle power, kW 11.2 • Max. torque, Nm 62 • Max. axial force, kN 18.7 • Max. idle feed speed, m / min 61 • Max. working feeds along the XYZ axes, m / min 30.5 • Number of positions in the automatic tool changer, pcs 18 + 1 • Max. tool diameter (with occupied adjacent positions), mm 64 • Max. tool weight, kg 2.5 • Tool change time (average), sec 1.8 • Positioning accuracy, mm ± 0.0050 • Repeatability, mm ± 0.0025 • Volume of the coolant tank, l 208 • Approximate weight of the machine (depending on the configuration), kg 2870 • Warranty, months. 12 We will find the necessary equipment for you, conduct all the necessary negotiations, prepare all legal documents, test, make a purchase, arrange delivery and installation, and provide warranty service. From laser head to milling center; from couplings - to complete equipment for industrial production - our company will help you save money and conduct a transaction in the USA without any complications. To contact us, write, call - we will be glad to cooperate with you!

The G2R company offers high-quality equipment from the American manufacturer according to the following technical characteristics: • Max. the established diameter over a bed, mm 533 • Max. adjustable diameter above the carriage, mm 533 • Max. diameter to be worked (depends on revolver), mm 254 • Max. processing length (without cartridge), mm 572 • Diameter of the 3-jaw chuck, mm 210 • Max. diameter of the processed bar, mm 64 • Diameter of the hole in the spindle, mm 88.9 • Max. spindle rotation speed, rpm 4000 • Maximum torque, Nm 203 • Maximum spindle power, kW 14.9 • Coolant tank volume, l 208 • Estimated weight of the machine (depends on configuration), kg 4278 • Warranty, months. 12 • Coolant system with a tank • Manual pneumatic gun for removing chips from a part and a machine • Machine lighting • Lamp for indicating the status of the machine • Electromechanical lock of the doors to the fence of the working area • Automatic shutdown of the machine • Set of adjusting supports • USB port • Direct thread cutting cycle • System automatic door opening • Ethernet interface • Export package • Internal transformer (354–480 V) • CE safety standards • Push-button switch to lock the memory for the remote control and management We will find the right equipment for you, conduct all necessary negotiations, prepare all legal documents, test, complete the purchase, arrange delivery and installation, provide warranty service. From the laser head to the milling center; From couplings to complete equipment for industrial production, our company will help you save money and conduct a transaction in the USA without any complications. To contact us, write, call - we will be glad to cooperate with you!

A three-layer, reinforced (“hosiery”) high-strength synthetic thread hose for watering, pumping and other work with liquids, including food. The inner layer of PVC is opaque, black, protects against sunlight and prevents the formation of algae inside the hose body. The outer PVC layer is transparent, painted in green. In the production, special protective additives are used against external factors such as ultraviolet radiation and abrasion. Between the inner and outer PVC layers, a high-strength braided cord made of high-strength synthetic thread is laid. Due to the improved quality indicators, this type of hose has higher operational characteristics (it does not break and does not bend). Characteristics: Product material - (PVC) Polyvinyl chloride Operating temperature -5 ° С / + 40 ° С No harmful substances (Cd), barium (Ba), lead (Pb) Reinforcement “hosiery”, synthetic thread UV protection Available diameters (inch) - ½; ¾; 1.

The Agromash Inter company offers pvc gate with a diameter from 40 mm to 160 mm. Gate valves are designed for installation as shutoff valves in various enterprises. They are a shutter made in the form of a sharpened plate. Due to the shape of the gate, on the one hand, the flow of liquids is completely blocked, and on the other, inclusions that may be contained in them are suppressed. The main task of the gates: shutting off the flow of working fluids in pipelines. Production material - PVC (PVC-U). Available gates of the following diameters: DN40, DN50, DN63, DN75, DN90, DN110, DN160. Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers washing nozzles with a diameter of 20 mm, 25 mm and 32 mm for a nozzle. Nozzles are designed for installation in a mechanical drum filter. Water supplied to the nozzle under a pressure of 2-4 atm. carries out cleaning of the filter mesh of the drum filter from adhering dirt, residues of feed, scales and other mechanical impurities. The nozzle is made of polymer materials resistant to aggressive environments. Thanks to the original design, it is easily disassembled for maintenance and installed on the pipeline. Price: 1 000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers a flotator of its own production for ultrasonic testing. • Flotator productivity: from 25 m3 per hour to 100 m3 per hour • The main task of the flotator • Removal of fine particles • Removal of organic residue Scope • Fish farms of ultrasonic testing • Owl Complete set • Stand • Aeration system • Compressor • Pump • Control cabinet Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers a sorting box for fry of own production. The sorting box for fry is intended for sorting fry • carp • trout • pike perch • clari catfish • tilapia • sturgeon • other types of fish Technical characteristics • the sorting box is made of polypropylene • has a wall thickness of at least 8 mm • Adjustable clearance from 1 to 20 mm Overall dimensions • Length - 320mm • Width - 387mm • Height - 220mm Price: 6,000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter

The company "Agromash inter" offers a ready-made engineering solution for fish farming in the UZV, with a capacity of 2 tons of finished products per year. High-quality equipment and modern water treatment technologies accompany the creation of a favorable environment for intensive breeding of high-quality fish products. The ultrasound module is supplied in the form of a kit that includes technological equipment, pipelines, electrical accessories. The kit includes technical information for the installation of equipment. If necessary, we carry out installation supervision. Price: 2,200,000 Contact person: Nikolay Aleksandrovich LLC Agromash inter

The company "Agromash inter" offers a ready-made engineering solution for fish farming in the UZV, with a capacity of 1 ton of finished products per year. High-quality equipment and modern water treatment technologies accompany the creation of a favorable environment for intensive breeding of high-quality fish products. The ultrasound module is supplied in the form of a kit that includes technological equipment, pipelines, electrical accessories. The kit includes technical information for the installation of equipment. If necessary, we carry out installation supervision. Key parameters: • Maximum one-time fish maintenance during rearing - 1200 kg • Maximum one-time fish maintenance during overexposure - up to 2000 kg • Area occupied by module equipment - 36 m2 • Total volume of water in the system - 34 m3 • Volume of fish breeding pools - 23 m3 • Average daily water change (per year) - 6% Price: 1,200,000 Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers trays for fry of own production for your fish farm. Bowls of trays are made of food grade engineering polypropylene. The material is resistant to various influences of hostile environments, such as acid, alkali and saline solutions. It also has resistance to ultraviolet radiation. All bowls are equipped with a protective flange. In addition, trays for larvae can be equipped with a bottom discharge, a pipe for supplying water, a system of saturation of water with oxygen. Our trays can be installed both indoors and outdoors. All products are made of environmentally friendly materials and have appropriate quality certificates. An official manufacturer's warranty is provided for all products! Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers for your fish farm a hatchery receiver for Weiss incubators of own production. The larva-receiver bowl is made of food grade engineering polypropylene. The material is resistant to various influences of hostile environments, such as acid, alkali and saline solutions. It also has resistance to ultraviolet radiation. All larvae are equipped with a bottom drain, a leveling pipe and a protective net. An official manufacturer's warranty is provided for all products! Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers oxygenators (oxygen cone) for your fish breeding complex. Productivity of oxygen cones is from 30 m3 per hour to 300 m3 per hour. Oxygenators are designed to saturate water with oxygen up to 300%. Oxygen cone (oxygenator) is made from durable fiberglass. Oxygen cones are used at ultrasonic testing enterprises (installations with closed water supply) for intensive cultivation of sturgeon, sterlet, bester, trout, and Russian sturgeon. Price: do not specify Contacts: Address: Russia, Belgorod st. Queen, 2 a, of. 621 Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers an oxygenator (oxygen cone) with a capacity of 100 m3 per hour for your fish breeding complex. The oxygenator is designed to oversaturate water with oxygen up to 300%. Oxygen cone (oxygenator) is made of stainless steel AISI304 (food grade stainless steel). Oxygen cones are used at ultrasonic testing enterprises (installations with closed water supply) for intensive cultivation of sturgeon, sterlet, bester, trout, and Russian sturgeon. A design feature is that the direction of water in the oxygenator is oriented from top to bottom. Due to the decrease in the flow velocity in the cone, an equilibrium is established between the lifting force of the oxygen bubbles and the water flowing down. Bubbles remain in suspension, thereby achieving optimal oxygen saturation of the water. The operating pressure in the oxygenator is controlled by a valve installed at the inlet. Price: 150 000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers an oxygenator (oxygen cone) with a productivity of 70 m3 per hour for your fish breeding complex. The oxygenator is designed to oversaturate water with oxygen up to 300%. Oxygen cone (oxygenator) is made from fiberglass. Oxygen cones are used at ultrasonic testing enterprises (installations with closed water supply) for intensive cultivation of sturgeon, sterlet, bester, trout, and Russian sturgeon. A design feature is that the direction of water in the oxygenator is oriented from top to bottom. Due to the decrease in the flow velocity in the cone, an equilibrium is established between the lifting force of the oxygen bubbles and the water flowing down. Bubbles remain in suspension, thereby achieving optimal oxygen saturation of the water. The operating pressure in the oxygenator is controlled by a valve installed at the inlet. Price: 80 000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers oxygenators (oxygen cone) for your fish breeding complex. Productivity of the oxygen cone is 30 m3 per hour. The oxygenator is designed to oversaturate water with oxygen up to 300%. Oxygen cone (oxygenator) is made of fiberglass. Oxygen cones are used at ultrasonic testing enterprises (installations with closed water supply) for intensive cultivation of sturgeon, sterlet, bester, trout, and Russian sturgeon. Price: 80 000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers for your fish farm an incubation apparatus of the tray type IL-4 Trout. The device is intended for incubation of sturgeon caviar and separation of viable larvae after hatching. In devices of this type, it is convenient to carry out all operations with caviar, as well as maintain free embryos and grow larvae until complete transition to active nutrition. The devices can be placed one above the other in 4 pieces. in a row. Water consumption is 0.005 l / s per 1 thousand eggs or from 0.17 to 0.2 l / s per 1 incubation tray. Price: 45 000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers the Sturgeon apparatus for your incubation workshop. The incubator is intended for incubation of sturgeon roe and separation of viable larvae after hatching. The principle of operation of the incubator: thanks to gusty normalized water supply, the fertilized, de-greased sturgeon caviar is continuously washed, simulating natural conditions. The sturgeon incubator, depending on the needs, can be equipped with 1, 2, 4, 6, 8, 16 trays. Each device is made of stainless steel, which is the key to long-term operation. Price: do not specify Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers for your fish farm the Sturgeon incubator for 16 trays. The device is intended for incubation of sturgeon caviar and separation of viable larvae after hatching. The principle of operation of the incubator is based on the fact that the fish box during the incubation process performs vertical reciprocating movements. As a result of these fluctuations, water entering the fish box through the mesh bottom and passing through the layer of caviar from bottom to top mixes the latter. Thus, the eggs during the incubation process are constantly in suspension, simulating natural conditions. Overall dimensions: Length-3470 mm Width-980 mm Height-1280 mm Weight-1160 kg The device is made of high quality materials, which is the key to long-term operation. Price: 490,000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers for your fish farm an 8-tray sturgeon incubator. The device is intended for incubation of sturgeon caviar and separation of viable larvae after hatching. The principle of operation of the incubator is based on the fact that the fish box during the incubation process performs vertical reciprocating movements. As a result of these fluctuations, water entering the fish box through the mesh bottom and passing through the layer of caviar from bottom to top mixes the latter. Thus, the eggs during the incubation process are constantly in suspension, simulating natural conditions. Overall dimensions: Length-2840 mm Width-980 mm Height-1280 mm Weight-580 kg The device is made of high quality materials, which is the key to long-term operation. Price: 270 000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers for your fish farm an 4-tray sturgeon incubator. The device is intended for incubation of sturgeon caviar and separation of viable larvae after hatching. The principle of operation of the incubator is based on the fact that the fish box during the incubation process performs vertical reciprocating movements. As a result of these fluctuations, water entering the fish box through the mesh bottom and passing through the layer of caviar from bottom to top mixes the latter. Thus, the eggs during the incubation process are constantly in suspension, simulating natural conditions. Overall dimensions: Length-1420 mm Width-980 mm Height-1280 mm Weight-300 kg The device is made of high quality materials, which is the key to long-term operation. Price: 135 000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers for your fish farm the Sturgeon incubator for 2 trays. The device is intended for incubation of sturgeon caviar and separation of viable larvae after hatching. The principle of operation of the incubator is based on the fact that the fish box during the incubation process performs vertical reciprocating movements. As a result of these fluctuations, water entering the fish box through the mesh bottom and passing through the layer of caviar from bottom to top mixes the latter. Thus, the eggs during the incubation process are constantly in suspension. Overall dimensions: Length-1100 mm Width-825 mm Height-1480 mm Weight-145 kg The device is made of high quality materials, which is the key to long-term operation. Price: 70 000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers for your fish farm an incubator "Sturgeon" on 1 tray. The device is intended for incubation of sturgeon caviar and separation of viable larvae after hatching. The principle of operation of the incubator is based on the fact that the fish box during the incubation process performs vertical reciprocating movements. As a result of these fluctuations, water entering the fish box through the mesh bottom and passing through the layer of caviar from bottom to top mixes the latter. Thus, the eggs during the incubation process are constantly in suspension. Overall dimensions: Length-400 mm Width-800 mm Height-1000 mm Weight-73 kg The device is made of high quality materials, which is the key to long-term operation. Price: 35 000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers the Weiss apparatus for your incubation workshop. The Weiss incubator is intended for incubation of salmon, catfish, sturgeon, cyprinid and other fish species. The unit is delivered ready for installation, and can be equipped with 1/3/5/8/10/12/16/32 glass flasks. Each flask has a volume of 8 liters and is equipped with a plastic cap with a nozzle, a removable silicone hose (safe for contact with food) and a tap that allows you to control the flow of water. The frame is made of painted metal. Each device is made of high quality materials, which is the key to long-term operation. Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers the Weissa incubator for your fish farm. The Weiss apparatus is intended for incubation of pike, tench, salmon, catfish, sturgeon, cyprinids and other fish species. The Weiss incubator is equipped with 12 flasks with a volume of 8 liters and is equipped with a plastic cap with a nozzle, a removable silicone hose (safe for contact with food) and a tap that allows you to control the water supply. The frame is made of painted metal. Overall dimensions: Length - 2520 mm Width - 480 mm Height - 940 mm Weight no more than 90 kg. The device is made of high quality materials, which is the key to long-term operation. Price: 70 000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter