Industrial Equipments and Machines in bulk on Qoovee

Refrigeration units for outdoor installation Split Ice Box systems are designed to create and maintain a temperature regime inside a refrigerating (freezing) chamber and consist of two parts: a condensing unit outside and an evaporator - inside the chamber, connected by a pipeline. The unit is charged with R404A refrigerant (R507 and R407C refrigerants can also be used). Ice Box C The outdoor and indoor units can be located at some distance from each other. Due to this, split systems can be used for cameras equipped in rooms with wall thickness and ceiling heights that do not allow the installation of monoblocks. Also, split systems are resistant to any atmospheric conditions and can be installed both indoors and outdoors. The electronic control unit of the split-system is installed on the electrical panel, maintains the set temperature in the cooled volume, and turns on the defrosting mode of the evaporator. There are two types of split systems: Ice Box Blue and Ice Box Green - low and medium temperature, respectively. Ice Box C Complete set Ice Box split systems are supplied in the following set: condensing unit evaporator passport (operation manual) Compressors and other components from leading European manufacturers are used in split systems. Produced on the basis of hermetic and semi-hermetic compressors.

The EM-62 labeling machine is designed for applying a ring, polypropylene label to a gas-filled cylindrical PET bottle. For visualization and control of the process, there is an operator touch panel from KINCO. Productivity up to 6000 labels / hour The broad graphic capabilities of the operator panel allow: to present the technological process of labeling clearly on the panel screen, to provide quick access to the settings of the unit's operation parameters, to visualize emergencies that have occurred during its operation. find answers to questions in the help sections for each parameter or alarm for maintenance personnel. The operation of the installation is controlled by a programmable logic controller (PLC) of its own design by the specialists of PraktikM. Based on the wishes of customers, the necessary technical requirements for this equipment and the innovative solutions of our engineers and technicians, it was possible to ensure the following features of the operation of the installation: a sign-synthesizing indicator - all settings, parameters, indication of emergency situations are available without the operator panel! Parameter entry is offered in the form of a tree-like menu using its own eight-key keyboard. Automatic control of the temperature of the glue bath with notification of an accident when it (temperature) goes beyond unacceptable limits. Detection of a malfunction of the temperature sensor (thermocouple) of the glue bath with an alarm indication on the screen of the operator panel and PLC. Automatic switching on of its own drive of the glue bath when the set temperature is reached. This excludes the possibility of turning it on in an unheated state in order to avoid damage to the mechanisms of the glue bath. Protection of the temperature control system of tools (glue and cutting knives) from a short circuit or failure of their heating elements with an alarm indication on the screen of the operator panel and PLC. Protection against short circuit of the power supply channels of the pneumatic valve coils with alarm indication on the screen of the operator panel and PLC. Tracking the state of the transport conveyor (general shop or own). When the conveyor is turned off, the system works out this situation in order to avoid sticking a label on an unsuitable bottle with an alarm indication on the screen of the operator panel and PLC. Tracking the end or break of a roll of labels. Memorizing presets for reapplying. Maintainability of PLC due to the use of a widespread element base. Calculation and indication of the performance of the installation in real time, depending on the length of the labels and the settings of the frequency converter of the drive of the installation. Alarm indication of the frequency converter of the unit drive on the screen of the operator panel and PLC. Not only smooth acceleration, but also smooth drum braking (so as not to break the gearbox). Slow manual cueing for probe learning and tool manipulation. Sensor training (button on the panel). Additional input (or several) for the second (third) tag sensor with sensor selection on the panel. Setting frequencies, drum acceleration and deceleration time, frequency, acceleration and deceleration times in "slow" mode from the panel. Instant stop by STOP button (without deceleration). Jam sensor at the exit from the machine. Warranty 24 months.

The Artmash plant offers a straw, hay, bulrush and other grass shredder with a capacity of 18.5 kW. The 18.5 kW industrial straw chopper is equipped with a cyclone for dust screening and a table for convenient bale feeding. CHARACTERISTICS OF THE INDUSTRIAL GRINDER Voltage: 380 V Engine power: 18.5 kW, 1500 rpm Productivity: 1000 kg / hour Mesh Diameter: 4.6.8mm Weight: 250 kg Dimensions: 1450 * 1000 * 1050 mm IMPORTANT + All units are made of quality steel. + The chopper rotor is equipped with John Deere branded knives made in the USA. + Each product is tested by quality control. + Warranty for equipment - 12 months. Video work: