Woodworking Machinery in bulk on Qoovee

Electric wood splitter Artmash 380 V is a rack and pinion model of an electromechanical splitter, adapted for connection to a three-phase network. Such a wood chopping machine is optimal for utilities and enterprises using solid fuel boilers. You will like the electric wood splitter Artmash 380 V, because it: completely safe to use. The manufacturer received a European СЄ certificate for a firewood preparation machine; stabs quickly, the split cycle is only 1.5 seconds. 20 cubic meters of firewood per shift is the usual norm for this unit; serves for a long time and without breakdowns. The design is well thought out, the parts subject to wear are made of stainless steel 18KhGT, are hardened and cemented. The splitting knife itself retains its properties throughout the life of the machine, the gear rack requires only periodic recovery. Thermal protection is installed on the motor; copes not only with birch logs, but also with knotty oak. All this thanks to a force of 12 tons and a friction clutch protecting the engine. To overcome a hard knot, it is enough just to make two hits; consumes a minimum of energy or fuel, since the impact force is provided not by the efforts of the motor, but by the inertia of the heavy flywheels; Suitable for splitting firewood with a diameter and length of up to 500 mm. At the same time, even when loading such heavy chocks, a good stability of the machine is ensured. The guaranteed service life of the electric wood splitter Artmash 380 V is 12 months. At the end of this period, you can always contact the manufacturer if you need to consult or replace consumables.

LLC Artmash is a manufacturer of lines for the production of pellets from waste wood processing industries for Ukraine and 20 other countries. At the request of the client, we can offer equipment of different capacities, we provide the most reliable information about the possibility of granulation of a particular raw material as well as possible performance. The standard line includes: Accurate loading auger 380V, 1.1 kW, 1500 rpm. Granulator 380V, 22 kW, 1500 rpm. Pellet cooler with vibrating table 380V, 5.5 kW, Before painting and selling all our equipment is tested for defects and their subsequent elimination. All nodes are made in-house with an inspection of quality control. Parts that are subjected to heavy loads are made of alloy steels with subsequent heat treatment. Contact us and we will help you choose the equipment of the necessary power and performance. Video with reviews of our customers The main advantages of our equipment: the matrix (die) is made of steel 20X with subsequent cementation in a thermal furnace. The hardness of the surface layer of the metal and the walls of the hole 62 HRC (bearing hardness) is achieved, which provides wear resistance for years of operation of the granulator; rollers are made in the same way as the matrix; the mechanism used involute helical gear transmission. Compared to spur gears, helical gear achieves a significantly lower noise level of the product as well as greater transmission durability; low power consumption. The matrix in diameter of 160 mm can work with 4 kW engines. 380 V and 4 kW, 220 V; in order to avoid engine overload, we have provided a thermal relay, which will timely turn off the engine in case of overheating; each granulator is tested for defects and repaired before painting and selling. Worm Gear Precision Auger Features Voltage: 380 V; Engine power: 1.1 kW, 1500 rpm; Productivity: up to 300 kg / h; Hopper volume: 0.6 cubic meters; Granulator weight: 140 kg; Dimensions: D2800 * W750 * H1600 mm. Characteristics of the pellet mill for pellets 380 V, 22 kW Voltage: 380 V; Engine power: 22 kW, 1500 rpm; Productivity: 400-800 kg / h; Granule diameter: 2-8 mm. The diameter of the matrix: 280 mm; Granulator weight: 400 kg; Dimensions: D1300 * W500 * H1300 mm. Pellet Cooler Characteristics Voltage: 380 V; Engine power: 4.5 kW, 3000 rpm; Productivity: up to 1000 kg / hour; Hopper loading volume: 1 cubic meter; Granule diameter: 2-6 mm. Diameter of the matrix: 160 mm; Granulator weight: 550 kg; Dimensions: D4000 * W1100 * H2500 mm.

Description: There are 2” or 3” kinds of PAD it’s useful for aperture smooth and grind. Long life, high speed. Light weight and trouble free. A durable yet economical choice offering longer life and higher speed to be suitable for process in vehicle body shop, mold and woodworking.   Specification: 1. Free Speed:15000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:600L/min 5. Net Weight:650g 6. Tool Length:160mm 7. Packing:20pcs/18kg/19kg/1.2'

The wood drying chamber model MGLD is designed for drying lumber in piles to a final moisture content of 8-12% with the possibility of front loading with a loader. The composition of the drying chamber includes: a body made of high-strength aluminum alloys, with an air circulation system installed in it (fans, diameter 800mm, each fan has 6 rotary aluminum blades), a supply and exhaust ventilation system (air dampers), a heating system (air heaters, thermal valves, pump, shut-off valve), humidification system (nozzles, pipes, irrigation, valves), air heating system, electrical cabinet, fully automated control system. Gates: lifting and sliding. Drying of wood in the chamber is carried out due to the reverse movement of heated air between the rows of pre-laid wood. Air is heated by radiators due to the circulation of superheated water in them. The MGLD model dries wood of any species, is reliable and economical in operation.

Brand New Product, PRODUCT OVERVIEW This is 20in. The Husqvarna 450 Rancher 2-stroke chainsaw is an outstanding all-round chainsaw for anyone who appreciates pro-level power and performance. X-Torq® 2.8 HP, 50.2 cc engine cm reduces fuel consumption and emissions. Meanwhile, the built-in fuel pump, Smart Start® technology and auto-return switch ensure smooth starting. 20 inches. The handlebar is equipped with an inertia-activated chain brake to reduce kickback and increase safety. The Smart Start® system with built-in fuel pump, automatic return switch and easy-to-pull start cord allows you to work quickly and with minimal effort. A simple side tension system allows for quick chain adjustments during operation. The LowVib® anti-vibration system helps reduce vibration, increasing user comfort and reducing user fatigue. 2 year limited warranty. FEATURES + BENEFITS Powerful 2.8 hp X-Torq® 2-stroke 50.2cc engine. reduces fuel consumption and gasoline emissions Rugged and manoeuvrable 20-inch. ideal for yard cleanup, firewood cutting, light felling work, etc. Smart Start® technology with built-in fuel pump, auto-reset switch and easy-to-pull starter cord ensures quick engine starts with minimal effort Inertia-activated chain brake, reduces kickback to reduce injury during operation Automatic oiler ensures constant supply of chain lubrication Simple side tension system allows quick adjustments during operation LowVib® anti-vibration system reduces vibration levels to help minimize operator fatigue Quick release air filter for easy cleaning and replacement Key Features Part Number No. 106858 Brand name Husqvarna Manufacturer's warranty 24 months parts / 24 months labor Ship weight 18.9 lbs Rod length 20 Displacement (cm3) 50.2 Power 2.8 Fuel capacity (oz) 15.22 Gas:oil Fuel ratio mixture 50:1 Chain brake Yes Regulus Powered Oil Pump Supply Primer Bulb Yes Low Vibration Handle Yes Toolless Chain Tensioning No Case Included No Dimensions L x W x H (in) 16 x 8.9 x 11.5 Product Weight 18.9

TYPE CTCS45T CTCS52T CTCS58T Engine 1-Cylinder,2-Stroke,Air-cooling Displacement 45CC 52CC 57.2CC Rated output power and relevant speed 1.7kw/7000rpm 2.2kw/7000rpm 2.6kw/7500rpm Idle speed 3000rpm 3000rpm 3000rpm High speed 11500rpm 11500rpm 11500rpm Fuel/Oil mixture ratio 25:1 25:1 25:1 Fuel tank capacity 550ml 550ml 550ml Oil tank capacity 260ml 260ml 260ml Bar size 16"/18"/20" 18"/20"/22" 20"/22"/24" Chain pitch 3/8"/0.325" 3/8"/0.325" 3/8"/0.325" Gauge 0.050"/0.058" 0.050"/0.058" 0.058" Color box Meas 480×260×290mm 530×260×280mm 595×270×315(110)mm G/N.W. 7/6kgs 8/7kgs 9/8kgs Qty./20'/40'/40'HQ 800/1600/1800pcs 780/1560/1760pcs 820/1640/1990pcs

The WOLLER BS-550 LICHT twin-shaft circular log saw machine is designed for longitudinal sawing of logs with a diameter of 120 to 550 mm into a carriage and unedged boards. The machine is used as a first row machine, high power production. The machine, like all BS series machines, is designed for sawing logs in one pass, into unedged sawn timber with good surface quality. At the request of the customer, the machine can be equipped with our near-station equipment. Technical characteristics: - log diameter: 0.12-0.55 m - log length: 2.5-6.5 m - saw diameter: 550-750 mm * - saw shaft diameter: 90 mm - number of saws (max): 8 pcs - saw shaft motors power: 2 x 55 kW ** feed logs: 3 kW - feed speed: 1-30 m / min - machine dimensions (L x W x H): 8.5 x 2.5 x 2.15 m - machine weight (approx): 4300 kg

Designed for precise cutting of workpieces along the length, release of material with perfectly flat end surfaces, as well as removal of defective areas of wood. Maximum board width: 300 mm Maximum board length: 6500 mm Cutting height: up to 100 mm Saw blade diameter: 350 mm Motor power: - sawing: 2.2 kW x 6 pcs-feed: 3 kW Feed rate: to be specified when ordering Overall dimensions of cross-cutting, m: 7 x 1.6 x 1.3 Weight: 1350 kg

Designed to produce cylindrical (round) parts, cuttings from square blanks of various types of wood, as well as synthetic materials. It is used for the production of: Furniture Products for household use Shafts for shovels, rakes, etc. Stakes, dowels for Sports equipment Diameter of the resulting product, mm: 10 - 60 Material feed rate, m / min: 6; nine; 12 The smallest workpiece length, mm: 350 Number of cutter head knives, pcs: 2 Shaft rotation frequency, rpm: 4000 Number of electric motors, pcs: 2 Material feed motor power, kW: 0.75 Cutter head motor power, kW: 3 Dimensions , mm (length * width * height) 850х500х995 Weight: 270kg.

Designed for precise cutting of workpieces along the length, release of material with perfectly flat end surfaces, as well as removal of defective areas of wood. Workpiece length: 500-1300 mm Workpiece width: up to 260 mm Workpiece thickness: 15-60 mm Saw blade size: 350х30 Number of circular saws: 2 pieces Saw drive power: 2.2 kW x 2 Feed power: 1.1 kW Feed speed : 5 m / min Machine dimensions (L x W x H), mm: 2000х1500х1100 Machine weight, kg: 300 ± 5

Designed for longitudinal sawing of logs in order to obtain carriages and unedged boards. Raw materials are fed into the saw unit using a caterpillar transport system. The log is fixed using automatic pneumatic clamps. WOLLER BS-550 LINIE ensures reliable operation even with 24/7 loading. Its design meets all modern safety requirements. Ease of setting the distance between the saws, ensures that the lumber of the desired size is quickly obtained. The machine has a colossal productivity of 300 - 400 m³ of round timber per shift. At the request of the customer, the machine can be completed with our near-station equipment. The maximum diameter of the log, mm: 120-550 Average max. diameter of a log taking into account curvature, mm: 300-500 Minimum length of a log, mm: 2500 Number of installed saws: 6 Diameter of saws, mm: 550/650/750 (Optional) Diameters of saw shafts, mm: 90 Number of revolutions of saw shafts, rpm : 3800 Power of saw shaft motors, kW: 55, 75, 90, 110 (on request) Feed speed, m / min: 1-30 Power of feed motors, kW: 17 Machine dimensions LxWxH, mm: 14700x2400x4050Weight, kg: 16700

The WOLLER BS-550 twin-shaft circular log saw machine is designed for longitudinal sawing of logs with a diameter of 120 to 550 mm into two-edged cant and non-edged board. The machine is used as a first row machine, high power production. The machine is designed for sawing logs in one pass, on unedged sawn timber with good surface quality. At the request of the customer, the machine can be completed with our near-station equipment. The maximum diameter of the log, mm: 120-550 Average max. diameter of a log taking into account curvature, mm: 300-500 Minimum length of a log, mm: 2500 Number of installed saws: 6 (8) (Option) Diameter of saws, mm: 550/650/750 (Optional) Diameters of saw shafts, mm: 90 Number speed of saw shafts, rpm: 3800 Power of saw shaft motors, kW: 55, 75, 90, 110 (on request) Feed speed, m / min: 1-30 Power of feed motors, kW: 13.4 Machine dimensions LxWxH, mm: 12300x2650x2250 Weight , kg: 12000

Designed for longitudinal cutting of a carriage (two-, three- and four-edged beams) obtained on a WOLLER 550 log saw into edged lumber. The machine is equipped with a sturdy frame made of thick-walled profiled metal. The workpieces are fed by chain conveyors and driven rollers. The control panel can be located both on one and on the other side. Maximum cutting height, mm: 180 Diameter of circular saws / shaft diameter, mm: 350/70 Max. number of installed saws on each shaft, pcs: 10 Feed rate, m / min: 0-35 Power of motors: - lower spindle drive, kW: 30/45 - upper spindle drive, kW: 45 - feed drive, kW: 3.7Max. width of the saw set, mm: 620Max. width of the workpiece being sawn, mm: 700 Overall dimensions, mm: 3020х2170х1810 Machine weight, kg: 4200

Designed for longitudinal sawing with circular saws of two-three-four-edged cants into boards and cutting boards into workpieces of a given thickness with a mechanized feed. The machine is unpretentious in work, it is installed on a flat concrete platform. Simple and reliable design allows to operate the machine in two-shift mode without loss of product quality. The machine is specially designed for operation in unheated rooms and at low temperatures, since it does not have pneumatics and hydraulics. It is used to obtain high-quality sawn timber in enterprises and workshops of sawmills and for the production of joinery and construction products. Widely used in lines for processing small size, as well as for the production of pallet workpieces. Maximum cutting height, mm: 120 Maximum distance between extreme saws, mm: 990 Width of the receiving window, mm: 1100 Minimum length of the workpiece, mm: 1000 Feed speed is changed by pulleys, m / min30, 40, 50 (customer option) Feed speed (automatic) OPTION, m / min: up to 85 Saw diameter, mm: 400 Saw seat diameter, mm: 75 Saw shaft drive motor power, kW: 30 (45, 55) Feed motor power, kW : from 2Saw shaft rotation frequency, rpm: 4000 Machine dimensions (L x W x H), mm: 2050х1730х1350 Machine weight, kg: 1650

“SA International” - Shanghai Asia International Electrical & Mechanical Co., LTDispart of theSIBC Group, which has been providing equipment and technology selection services in various fields since 2017.   -   Construction.- Road construction.- Metallurgy.- Mining.- Chemical industry.- Production lines for various purposes.   We are trusted by clients in Europe, USA, Canada, Malaysia, India, South Korea, Russia, Thailand. The company " SA International " has an official representative office on the territory of the Russian Federation, in the city of Krasnodar to simplify cooperation, document circulation and customs clearance for our clients. Cooperating with our company, you can be confident not only in the quality of the supplied equipment, but also in the after-sales service.    We provide:   - Machinery and equipment for the construction industry, such as:Asphalt concrete plants / plants (ABZ), concrete mixing plants / plants (BRU / RBU), self-propelled concrete mixers with self-loading function, concrete pumps, lines for the production of tiles and blocks, etc.   - Equipment for mining: crushers, screens, screens, conveyor belts, pumps, etc.   - Alligator scissors and metal presses.   - Cargo and wheeled vehicles: loaders, excavators, bulldozers.   - Storage equipment.   - DES and electric motors.   - Chemical reagents and components.   Also, "SA International" is a manufacturer of conveyor belts.   Over the years of working with factories in China, we have earned a reputation as a reliable partner and a center of excellence for quality assessment among our customers. Our managers will conduct a full market assessment, advise you on all emerging issues, provide complete information as soon as possible, and engineers will monitor the entire production process to minimize the percentage of defects and will train your staff.   An additional advantage of working with us will be that the managers of "SA International" know all the logistics processes, offer competitive prices and the shortest delivery times.

Multifunctional belt sander grinder KUPERTEK 3001 with a rotary mechanism and a frequency converter. Specifications:   overall dimensions: length 740-990 mm, width 370 mm, height 450 mm .; weight: 35.7 kg.; engine power: 1.1 kW.; number of revolutions: 2840 rpm; connection 220 V .; belt width: 50 mm .; tape length: 1000 ... 1500 mm .; belt speed: 20 m / s; drive roller diameter: 135 mm. table size: length 150 mm, width 250 mm .; working height: 290 mm .; tape inclination angle: 40 °… 110 °; frequency converter 1.5 kW; swivel mechanism.  

Cutting machine: Rated voltage (V): 220 Rated frequency (Hz): 50 Cutting disc diameter (mm): 110 Max. cutting depth (mm): 30 Rated power (w): 1200 Rated speed (r / min): 13000 Net (kg): 3.0

This machine is suitable for the processing of diversified and complex products the processing of multiple, widely used, can engrave drilling, etc., mainly used for carving and milling.     Woodworking industry: this machine is suitable for coffin, shoucai, wooden door, embossment carving, also can do three-dimensional wave board processing, screen art window processing, computer table and board home products auxiliary processing. Our 1325 CNC Router is a woodworking cnc router machine with a high-performance configuration. And have good stability, high accuracy, lower wastage, and long service time. Principal Axis uses Water-cooling principal axis, resistant to wear and low noise and can cooling the machine timely and effective .Then Machine Casing has Factory customization, electrostatic plastic absorbing and no peeling paint. High accuracy. The control box adopts an advanced CNC system, making it high stability. Guide Rail adopts Taiwan HIWIN double nut ball screw ensures more stable movement and high accuracy. Our router may carve various kinds of shade vulture, relief, craft, and gift, as a typical of multi-functional machine

Is specially designed for automation mechanical equipment to adjust speed ,protect and save energy ,can be widely used in food packing machinery, textile machinery, woodworking machinery ,reflow welding lines ,fans, water pumps.

We will find machines, equipment, Mini and Large Plants and Factories, bring and install. Quality is our priority

Double-column automatic band saw B-33 The machine is directly from the manufacturer. Full control during production, testing, packaging and delivery. The fastest and most reliable delivery route. An updated model that replaced the CNC saws H-300HA and GZK4233 from the famous Julihuang (JLH) factory. Specifications: ·          1 Maximum cutting range (mm)   330 × 330 × 330 (W x H) ·          2 Sawing speed (third gear) 10-80 m / min ·          3 Band saw blade specifications (length * width * thickness) 4115 * 34 * 1.1 mm ·          4 Feed rate Hydraulic infinitely variable speed control ·          5 Main motor power 5.0 kW ·          6 Hydraulic motor power 0.75 kW ·          7 Volume of hydraulic oil tank 70 l ·          8 Cooling pump motor power 0.75 kW ·          9 Coolant tank volume 100 l ·          10 Main drive type Worm gear ·          11 Workbench height 500 mm ·          12 Main drive mode Worm gear ·          13 Clamping method Hydraulic clamping ·          14 Belt tensioning method hydraulic ·          15 Method of cleaning from sawdust Wire brush ·          16 Dimensions of base unit (LxWxH) Approx.2250 × 1550 × 2300mm ·          17 Weight   1750 kg * The price is indicated including VAT 20% and delivery to St. Petersburg.   On the issues of order completion, the final cost, specification of the production time, as well as on the production of products to order - write and call, we will be glad to cooperate with you!

Two-column automatic band saw H-400HA. The machine is directly from the manufacturer. Full control during production, testing, packaging and delivery. The fastest and most reliable delivery route. Specifications: ·          1 Maximum cutting range (mm) 400 × 400 × 400 (W x H) ·          2 Cutting speed (third gear) 20-90 m / min ·          3 Band saw blade specifications (length * width * thickness) 4800 * 34 * 1.1 mm ·          4 Feed rate Hydraulic infinitely variable speed control ·          5 Main motor power 4.0 kW ·          6 Hydraulic motor power 1.5 kW ·          7 Volume of hydraulic oil tank 70 l ·          8 Cooling pump motor power 0.07 kW ·          9 Coolant tank volume 80 l ·          10 Main drive type Worm gear ·          11 Workbench height 500 mm ·          12 Main drive mode Worm gear ·          13 Clamping method Hydraulic clamping ·          14 Belt tensioning method hydraulic ·          15 Method of cleaning from sawdust Wire brush ·          16 Dimensions of base unit (LxWxH) Approx.2600 × 1600 × 2400mm ·          17 Weight   2300 kg On the issues of order completion, the final cost, clarification of the production time, as well as on the production of products to order - write and call, we will be glad to cooperate with you!

The Artmash plant offers a straw, hay, bulrush and other grass shredder with a capacity of 18.5 kW. The 18.5 kW industrial straw chopper is equipped with a cyclone for dust screening and a table for convenient bale feeding. CHARACTERISTICS OF THE INDUSTRIAL GRINDER Voltage: 380 V Engine power: 18.5 kW, 1500 rpm Productivity: 1000 kg / hour Mesh Diameter: 4.6.8mm Weight: 250 kg Dimensions: 1450 * 1000 * 1050 mm IMPORTANT + All units are made of quality steel. + The chopper rotor is equipped with John Deere branded knives made in the USA. + Each product is tested by quality control. + Warranty for equipment - 12 months. Video work:

Применяется при изготовлении выплавляемых моделей для точного литья деталей сложной геометрической формы.Предел прочности при статическом изгибе, при температуре (19±1) 0С, МПа, не менее5,5Теплоустойчивость, °С, не менее36Массовая доля золы, %, не более0,1Температура каплепадения, °С85-95Кислотное число, мг КОН на 1 г состава, не более

Применяется при изготовлении выплавляемых моделей для точного литья деталей сложной геометрической формы.Предел прочности при статическом изгибе, при температуре (19±1) 0С, МПа, не менее3,0Теплоустойчивость, °С, не менее37Массовая доля золы, %, не более0,10Температура каплепадения, °С75-90Кислотное число, мг КОН на 1 г состава, не более

The mini-band sawmill is designed to cut wood of any species, and also to dissolve logs. As a result, you will receive ready-made timber, sleepers, slats, edged and unedged boards, veneer and other sawn timber. The sawmill works in a horizontal area, lifting is carried out electromechanically. The horizontal mini-sawmill has the following advantages in operation: High quality lumber, low waste. Quick installation of the product, setting the required parameters. High-quality and precise cutting of wood of any degree of hardness. Does not require a foundation, therefore it is easy to install and move.

The wood waste pelleting line is designed for the production of fuel pellets (pellets). Raw materials: wood waste, chips, slabs, balance The resulting product: pellets with a diameter of 6-8 mm, a length of 10-25 mm The wood waste pelleting line contains all the areas necessary for the process, ensuring: Drying of raw materials Shredding Moisturizing Pressing Cooling and screening Dosing and packaging

The furnace for the production of charcoal from raw materials with a moisture content of more than 25% is equipped with a complex for preliminary drying of wood, has a capacity of 60-70 tons of coal per month. The main feature of the furnace is the presence of an automated furnace control system, which allows you to control the temperature conditions and the quality of the products. The drying complex allows to reduce the moisture content of coal by 30-40%, without reducing productivity. BASIC TECHNICAL CHARACTERISTICS "ModEco 4-60" < strong> no. Parameters Unit measurements Value 1 The area occupied by the ModEco 4-60 oven m 2 127.3 2 Overall dimensions of the main block of the ModEсo 4-60 furnace, not less than: - length / length with a conveyor - width -height m 6.75 / 16.75 7.6 8-10 3 Package weight , no more t 42 4 Mass of each transport block, no more t 9.3 < / td> 5 Supply voltage, current frequency IN; Hz 220; 50 6 Power consumption of the "ModEсo 4-60" installation < / td> kWh 0.5 7 Consumption of raw materials (firewood), L = 300 ... 350 mm m 3 / day 13-16 8 < td> Firewood consumption to support processes * m 3 / day 0,2-1,0 9 Productivity for charcoal with wood moisture up to 25% ** kg / day 1800-2000 10 Service personnel *** people / cm 2-3 11 Time to prepare for launch hour 2 12 Preparation time for carriage by road < / p> hour 48 13 Cycle --- Continuous 14 Cycle time per retort ** hour 16-20 15 Coal cooling time in extinguishers hour 24-48 16 Operating temperature range Furnace o С 560-650 pyrolysis chambers < / p> o < / sup> С 510-580 17 Maximum allowable temperature < p> Furnace o C 700 < / tr> pyrolysis chambers o C 600 * - the value of the parameter depends on the season, moisture content of raw materials. ** - the value of the parameter depends on moisture content, breed and fraction of raw materials. *** - the value of the parameter depends on the number of installations at one site: 1 installation - 2 people per shift 2 installations - 2 people per shift 3 installations - 3 people per shift < / i>