Industrial Equipments and Machines in bulk on Qoovee

ENERGOSERVICE-M LLC is a leading Ukrainian enterprise in the supply of industrial refrigeration equipment with highly qualified engineering and production personnel and modern technological equipment. ENERGOSERVICE-M LLC - is a supplier of crane and autonomous air conditioners to ensure the safe operation of technological equipment, maintain the required temperature and humidity, clean it from harmful impurities: Autonomous industrial air conditioners: KA1-25 (KA2-25), KA1-40 ( KA2-40), KSA-15 (2KSA-15), KSA-20 (2KSA-20), KSA-25 (2KSA-25), KSA-45 (2KSA-45), 1KSA-15 (3KSA-15), 1KSA-20 (3KSA-20), 1KSA-25 (3KSA-25), 1KSA-45 (3KSA-45), KSA6.5 / 25 (1KSA6.5 / 25), KSA-3/15 (1KSA-3 / 15) are installed in industrial and office premises: 1) Control panels (posts) on rolling mills ( CA-15, KSA-20, KSA-25); 2) Control panels in the heat-power workshop (KSA-15, KSA-20); 3) Mashrooms (KSA-25, KSA-45); 4) Electrical facilities (microprocessor, thyristor, local telephone exchanges); 5) Laboratories (chemical, quantometric); 6) Service premises (conference rooms, canteens, change houses).

The company sells components for diesel engines of the 6ch 12/14 series: Names of parts and assembly units and their designation CRANKSHAFT 164.02.101 GEAR Z-36150.02.102-2 GEAR Z-55150.02.103-3 OIL TRIPPER 171.02.041 SHAIBA150.02AY150 SHA .02.108 LEAD 657.02.110 OIL TRIPPER 551.61.041 NUT 551.61.110-01 BOLTM16x1.5x45.66.05 HATCH LID 03.103-1 THRESHOLD BEARING150.03.107-1 LATERAL COVER150.03.112 RING164.03.114 EXTREME BEARING150.03.115 UPPER INSERT LONG RESISTANT161.03.120 GASKET150.03.126 GASKET150.03.128-1 GEAR Z-72150.03.132-2 GEAR Z-43150.03.133 NUT150.03.134-1 WASHER STOP150.03.137 TOLKATEL164.03.03.151TELT116.03.03.151T1TELEKT164.03.03.151T1T1KLET1161.03.151TELT1161.03.1151T1T1KLET1161.03.151T1T1KLET1161.03.151TELT1161.03.1151T1T1KLET1161.03.151TELT1161.03.1151T1T1KLET1161.03.151T1T1K1501501501501501501-1011-1501-1011-1001 .03.208-3 WASHER150.03.221 WRENCH 150.03.221-1 NUT 450.03.240 GASKET 150.03.228-1 NUT 150.03.230 GASKET .04.022 COMPRESSION RING172.04.102 COMPRESSION RING (B) 172.04.114 PISTON FINGER 150.04.104-1 STOP RING457.04.105 SHATUNA HEAD BUSHING 10 ShPLINT4h25,05 TSILINDROV171.05.000-1 HEAD MOUNT KOROMYSEL164.05.021 PUSKOVOY150.05.022 VALVE PLUG HEAD WITH KLAPANAMI171.05.023-1 KLAPANA164.05.108-1 SLEEVE KLAPANA770.05.108 rocker LEVOE164.05.124-1 rocker PRAVOE164.05.125-1 VALVE VSASYVAYUSCHIY171. 05,127 VALVE SPRING VALVE NARUZHNAYA150.05.128 VYHLOPNOY171.05.130 KLAPANA457.05.131 LOCK PLATE PRUZHINY171.05.132 spring valve spring plate VNUTRENNYAYA171.05.135 SLEEVE KLAPANA171.05.138 KRYSHKA457.05.137 PROKLADKA157.05.167 PROKLADKA457.05.174 PROKLADKA457.05.176 VYPUSKNOY150.06.000-2 COLLECTOR COLLECTOR VYPUSKNOY153. 06.101-2 GASKET 657.49.113 FRONT COVER150.08.001 DRIVE HOUSING RS-3M657.08.002 COVER150.08.102-2 COVER551.08.102-1 GASKET 657.08.103 VALIK166.08.104 OIL DRIVE HOUSING. NASOSA166.08.105 SCHITOK551.08.109 GEAR Z-55166.08.114 DISK166.08.123 UPORNOE1chsp.27.100 RING GEAR PUMP MASLYANYY164.10.000 VEDOMAYA558.10.003-1 VALIK558.10.103 VEDUSCHAYA558.10.104-1 PRUZHINA150.10.110 GEAR PUMP INNER WHEEL KONTURA172.11.000 RABOCHEE172.11.002 VALIK756.11.104-1 WASHER150.11.112-2 SPRING 756.11.115 CALIPER SEALING GRID150.12.043-1 RING 337.12.114-2 FUEL PUMP DRIVE164.14.000-1 LEAD CLUTCH 150.14.106 ELASTIC WASHER BRACKET 164.15.106 SEALING RING 664.54.116 GLASS RIBBED 3-190-3.5 MPa OIL-PUMPING PUMP MZN-2657.17.026 FORSUNK164.25.000-4 SPRAYER 164.25.001 GASKIT16 NORDS4.17 KORODES2.27.44 KORODI-2 ORDER. 27.101-1 BUSHING BUSHING 150.27.103 BOLT164.27.103 DRIVE SPRING 337.27.104-1 STOP BUSHING 150.27.105-1 WASHER 150.27.107 AIR HEATER 457.28.001 STARTERSTR-25 GENERATORGSK-1500ZH ROTARY FREQUENCY RELAYS RRS-ЗМ ОМ4-1 VOLTAGE REGULATOR R-N-1M SPEED SENSOR 167.29.000-2 INLET WATER PUMP152.31.000-2 KRYLATKA 152.31.005 HOSE VALENKO1502.1102.1102.11.1102.11.31.101.21.11.11.311.11.12.111.11.11.31.111.21.11.11.311.11.12.11.11.12.11.11.12. .33.042 STOP USTROYSTVOSU-1-24VMN FILTER TOPLIVNYY171.36.000 ELIMENT FILTRUYUSCHIYETF-3 PUMP TOPLIVNYY159.44.000 PUMP TOPLIVNYY172.44.000 PUMP TOPLIVNYY670.24.000 PUMP TOPLIVNYY464.74.000 PUMP TOPLIVNYY661.74.000-2 PUMP TOPLIVNYY657.74.000 BASE PAIR REGULYATORA160.44.002 PLUNZHERNAYA159. 44.003-2 PLAIN COUPLES160.44.003-2 PLunger couples958.44.003-2 PLAIN COUPLES459.44.003 NAGN VALVE TATELNYY160.44.004 FINGER KRESTOVINY160.44.005 Bucs PODSHIPNIKA160.44.007 POVOROTNAYA160.44.030 LINER PLATE PRUZHINY337.24.135 PROBKA337.24.142 NASOSA160.44.108 ROLLER LINER UPORNAYA160.44.109-2 MASLOOTROZHATEL160.44.110 REGULYATORA150.44.116 RACK GEAR FITTING REGULIRUYUSCHAYA160.44.129 NAZHIMNOY160.44.131-1 PRUZHINA160 .44.132 SPRING PLATE PLUNZHERA160.44.133 PRUZHINY160.44.134 pusher in SBORE160.44.143-1 coupling with VINTOM159.44.011 SERDECHNIK150.44.026 SPRING GLASS GRAVNAYA161.44.126 PRUZHINY160.44.151 KATARAKTA150.44.006 RYCHAG160.44.009 MECHANISM - DU661.74.004 PLATAG84-1 REFRIGERATOR VOZDUHA164. 46.000-7 GEARBOX 150.48.001-1 GEAR Z-51150.48.102-3 ESTERNYA Z-53150.48.103-2 OS150.48.104-2 KOLTSO150.48.105-1 SHAYBA150.48.124 COLLECTOR VSASYVAYUSCHIY461.49.001 CENTRIFUGE MASLYANAYA150.77.000

From stock and on order we supply spare parts for diesel engines of the 4CH 10.5 / 13 series: Name of parts and assembly units and designation Crankshaft 962.02.101 Washer1ch2.0540 Oil deflector150.02.104 Gasket160.03.012 Ring962.03.114 Thrust ring4ch1.0114 Thrust ring4ch1.0115 Insert core4ch1.0112-4ch1.0162 Connecting rod liner457.04.109-110 Compression ring (chrome.) 962.04.114 Compression ring962.04.102 Oil scraper ring962.04.022 Oil scraper ring (scraper.) 962.04.103 Locking ring1ch2.035 Piston pin ГШ1326.0.0 Connecting Rod Bolt1ch2.0310 Connecting Bolt1ch2.0310 Connecting Bolt1ch2.0310 Cylinder Head bore962.05.000-1 Cylinder head962.05.001-1 Rocker arm 962.05.021-1 Cylinder head (with valve) 962.05.023-1 Intake valve160.05.127 Exhaust valve160.05.134 Valve bushing962.05.108 Valve spring (external.) 962.05.1.128 Valve lock 160.05.131-1 Spring plate1ch2.0411 Gasket962.05.174-1 Gasket962.05.176 Oil pump360.10.000 Internal pump167.11.000 Impeller wheel260.11.002 Nut150.11.159 circlip150.11.120 Washer150.11.112-2 Packing gland 756.117166. 11.118-1 Spring756.11.115 Gear4ch2.099-1 Oil cooler filter drain KR-2-1305000 Water cooler862.54.000-1 Pack of tubes962.54.042 O-ring664.54.116 corrugated glass ТЗ-190-3,5MPа High-pressure pipe962.20.001 ... .004 Checker150.23.104 Outboard water pump167.31.000 Krylchatka260.31.005 Gear wheel260.31605 1 Injector 962.25.000-3 Sprayer184.25.001 StarterST-25 Voltage regulator RL-2m-1 Voltage regulator (electronic) RL-N-1 Speed relay (electronic) RS-E Electronic tachometer TNVD260.44.000 TNVD260.24.000 TNVD861.24.000-1 TNVD260 .74.000 Plunger pair -24 Oil pump MZN-2657.17.026 Charging generator GSK-1500M Tachometer and indicating device D-4, D-5 TMi3M Gear1ch2.0215-1 Gear4ch2.0222-1 Gear4ch2.052-1 Gear4ch2.053-1 Gear146.042.002 -2 Gear4h2.0750-1 Gear360.08.021

final pressure: 150 kgf / cm2 productivity: 1.8 m3 / min. THE UNIT OF DRYING AIR UBOV-0.3 / 150 is intended for drying and purification of air compressed to a pressure of 150-200 kgf / cm2 from moisture and mechanical impurities. Recommended for use with compressors EK2-150, EKPA2-150, KR-2 (AKP-2), VT1.5-0.3 / 150.

Rotary compressors and gas blowers are used in aeration systems of fish ponds, potable water storage tanks as well as aeration systems in the sludge pools of treatment facilities, when spraying gardens and crops, in foundries. Aeration is a process of forced saturation of water with air, or oxygen. To ensure this process, a low-pressure compressor or blowers for aeration are used, and its purpose is: Aeration is the process of forced saturation of water with air, or oxygen. To ensure this process, a low-pressure compressor or aeration blowers are used, and its purpose is: Oxidation of iron compounds (water deferrization) and manganese, which consists in the oxidation of iron and manganese compounds with oxygen. As a result, these compounds precipitate in the form of flakes, which are retained by a special filling sediment filter. Removal of dissolved gases, including toxic ones, for example, hydrogen sulfide and methane. Disinfection of water as a result of the destruction of organic substances contained in it, under the influence of oxygen. Removing bio-pollution: when oxygen is saturated with water, the number of beneficial aerobic bacteria that process biomass into carbon dioxide and methane-biogas increases. Now the bio-treatment process is used at all large treatment facilities in Russia. The resulting biogas can also be pumped out of the tanks of treatment plants using blowers for further use, for example, for the production of electricity or fuel for vehicles. However, in Russia this practice is not yet common. Maintaining the pond ecosystem by saturating the water with oxygen. In stagnant water under the influence of sunlight, anaerobic bacteria begin to multiply actively. As a result, the reservoir turns into a muddy swamp with an unpleasant odor. Also, due to insufficient oxygen concentration in the water, pestilence of fish and other beneficial organisms occurs.

We sell High Qualtiy CNC Milling machines and Machine Centers.

Compressor plants 1KR-2 and 1AKR-2 are used to pump air into cylinders and maintain pressure from 80 to 150 kgf / cm2 in manual (1KR-2) and automatic (1AKR-2) modes. Compressor plants 1KR-2 and 1AKR-2 are used: · for starting diesel-electric units; · To provide industrial facilities with compressed air; · As part of oil drilling rigs. The installation consists of a three-stage compressor, driven by an electric motor through a V-belt drive. Circulating pressure lubrication from gear pump. Liquid cooling, closed loop.

Air compressors 4VU1-5 / 9 series are used to provide compressed air to pneumatic tools, devices, mechanisms; work in pneumatic transportation systems for bulk solids (sand, cement, grain, etc.). Are applied: · at machine-building enterprises; · As part of oil and gas rigs; · At the facilities of the petrochemical, gas, metallurgical, electrochemical, mining and other industries. Piston compressors, V-formed, four-cylinder, two-stage. Drive from an electric motor through an elastic coupling. Forced lubrication. Air cooling of cylinders and refrigerator. Condensate discharge and discharge are automatic. Compressors 4VU1-5 / 9 are equipped with an automatic control and protection system, which provides: · automatic maintenance of pressure in the receiver within specified limits by starting and stopping the compressor, as well as bypassing the air from the discharge to the suction; · Unloading and purging of the compressor when it is stopped; · Electric oil heating in the crankcase (for the northern version); · The ability to purge and unload the compressor from the control panel in manual mode; · Emergency stop during overheating of compressed air; · Emergency stop when the pressure in the lubrication system is below the permissible value. Compressors with relay or microprocessor automation are available. 4VU1-5 / 9 air compressor series are manufactured in the following modifications: 4VU1-5 / 9 M1 compressor 4VU1-5 / 9 M2 compressor 4VU1-5 / 9 M3 compressor (without electric motor and frame) 4VU1-5 / 9 M4 compressor 4VU1- compressor 5/9 M6 (without electric motor, refrigerator, frame, control panel and pressure gauge shield) 4VU1-5 / 9 M7 compressor with electric oil heating (without electric motor and frame) 4VU1-5 / 9 M8 compressor with electric oil heating 4VU1-5 / 9 compressor M32 (without electric motor and frame) Compressor 4VU1-5 / 9 M42

MVT36-2-0 Designed for cooling a liquid coolant in air conditioning systems, cooling systems for milk, soft drinks, beer, sparkling wines, oils using an intermediate coolant. It is used on dairy farms, food industry enterprises, in air conditioning systems.

Stand-alone air conditioner AKV-4.5 with air-cooled condenser, designed for cooling, heating and purifying air in industrial premises, control rooms, equipment rooms, electrical halls, office rooms, at ambient temperatures up to + 45 ° C. Provides maintaining the required air temperature in the range from 12 ° C to 28 ° C, with an accuracy of ± 1 ° C. The air conditioner is equipped with compressors and components of the world's leading manufacturers in the field of refrigeration - Copeland, Danfoss, Bristol. NAME OF PARAMETERS \ MODEL AUTONOMOUS AIR-CONDITIONER AKV-4,5 Productivity on cold, kW 21,0 Productivity on heat, kW 12,0 Nominal air consumption, m3 / h 4500 External static pressure, Pa 300 Degree of air purification,% 90 Refrigerant R -22 Power supply 380 V / 3ph / 50 Hz Power consumption (in cooling mode), kW 8.9 Evaporator type Copper tubes with aluminum fins Condenser type Copper tubes with aluminum fins TRV refrigerant flow regulator TRV refrigerant flow regulator Fan (centrifugal with double external suction): drive: belt; power: 1,5 kW. Overall dimensions (length x width x height), mm: air handling unit: 520 x 1200 x 1800; condenser unit: 650 x 1500 x 850. Weight, kg: air handling unit: 265; capacitor block: 110.

It has a V-shaped design, is able to switch to two modes of operation on R-12 freon. The first allows you to issue cooling capacity of 14.9 kW, spending 5.0 kW. The second mode allows lower rates: 10.5 kW in the cold and 3.4 kW of energy consumption. The FV6 compressor and the FU 12 compressor are one of the most popular models in their segment. They are installed in powerful refrigeration units and units that are used in the Navy, in the metallurgical, mining, chemical, energy industries and special purpose facilities. Spare parts and the complete assembly of the FV 6 Freon compressor can be bought at manufacturer prices from the official distributor of the Refma factory in Belgorod. To contact managers, fill out the contact form, call the above phone numbers or send an e-mail to the company. The FU12 compressor is one of the main elements of the refrigeration unit and serves to carry out a continuous refrigeration cycle by constantly aspirating the refrigerant vapor from the evaporator and compressing them to condensation pressure. Designed to work as part of automated stationary and transport refrigeration units and air conditioners. NAME OF PARAMETERS \ MODEL COOLING COMPRESSOR ФУ12 Compressor type Freon compressor, piston, V-shaped, single-stage, cross-axle with external drive. MODE 1 Cooling capacity, kW (kcal / h) 14.9 (12800) Effective power, kW 5.0 Volume described by pistons, m3 / h 62.0 Cooling capacity and effective power are indicated in the mode, ° С during operation on R-12 on the mode: boiling point minus 15 ° С; condensation temperature 30 ° C; suction vapor temperature 15 ° C; shaft rotation speed 24 s-1 (1440) (rpm). MODE 2 Cooling capacity, kW (kcal / h) 10.5 (9000) Power consumption, kW 3.4 Volume described by pistons, m3 / h 41.4 Cooling capacity and effective power are indicated in the mode, ° С during operation on R-12 on the mode: boiling point minus 15 ° С; condensation temperature 30 ° C; suction vapor temperature 15 ° C; shaft rotation speed 16 s-1 (960) (rpm). Cylinder diameter, mm 67.5 Piston stroke, mm 50 Number of cylinders, pcs 4 Freon refrigerant 12 Brand of used oil ХФ12-16 (for R-12) Amount of refilled oil, kg 2.5 ± 5% Weight, kg 90 Overall dimensions (length x width x height), mm 484 x 530 x 426

Compressor FV6. It has an external drive and operates in 3 modes. The first uses R-12 freon. The device is capable of achieving 7.5 kW of cooling capacity, while consuming no more than 2.5 kW of energy. The second mode also includes operation on R-12 freon, but the compressor produces up to 5.35 kW, spending 1.7 kW of energy. The third mode is activated when refueling with R-22. This makes it possible to generate 11.05 kW of cooling capacity, using 4.2 kW of electricity. The FV6 compressor is one of the main elements of the refrigeration unit and serves to carry out a continuous refrigeration cycle by constantly aspirating the refrigerant vapor from the evaporator and compressing them to condensation pressure. Designed to work as part of automated stationary and transport refrigeration units and air conditioners. NAME OF PARAMETERS \ MODEL REFRIGERATING COMPRESSOR ФВ6 Compressor type Freon compressor, piston, vertical, single-stage, cross-axle with external drive. MODE 1 Cooling capacity, kW (kcal / h) 7.5 (6500) Effective power, kW 2.5 Volume described by pistons, m3 / h 31.0 Cooling capacity and effective power are indicated in the mode, ° С during operation on R-12 on the mode: boiling point minus 15 ° С; condensation temperature 30 ° C; suction vapor temperature 15 ° C; shaft rotation speed 24 s-1 (1440) (rpm). MODE 2 Cooling capacity, kW (kcal / h) 5.35 (4600) Power consumption, kW 1.7 Volume described by pistons, m3 / h 20.7 Cooling capacity and effective power are indicated in the mode, ° С during operation on R-12 on the mode: boiling point minus 15 ° С; condensation temperature 30 ° C; suction vapor temperature 15 ° C; shaft rotation speed 16 s-1 (960) (rpm). MODE 3 Cooling capacity, kW (kcal / h) 11.05 (9600) Power consumption, kW 4.2 Volume described by pistons, m3 / h 31.0 Cooling capacity and effective power are specified in the mode, ° С during operation on R-22 on the mode: boiling point minus 15 ° С; condensation temperature 30 ° C; suction vapor temperature 15 ° C; shaft rotation speed 24 s-1 (1440) (rpm). Cylinder diameter, mm 67.5 Piston stroke, mm 50 Number of cylinders, pcs 2 Refrigerant R12 or R22 Brand of used oil ХФ12-16 (for R-12) or ХФ22с-16 (for R-22) Amount of refilled oil, kg 1 , 7 ± 5% Weight, kg 50 Overall dimensions (length x width x height), mm 368 x 324 x 392

A heat pump is a machine that can transfer heat from a colder environment (air, earth, solar radiation, water from underground strata, water from open reservoirs, water from a common network, heat recovery, industrial waste water) to a hotter one (air, water and other). Under certain conditions, a heat pump with a compressor having a 1 kW electric motor as a drive can provide a thermal power of 3-5 kW, although it is known that the simple heat generation on a resistance with an electric power of 1 kW cannot exceed 1 kW. INSTALLATION APPLICABLE COMPRESSOR REFRIGERANT OVERALL DIMENSIONS, MM WEIGHT (NET), KG NKV60-2-8 “air-water” 5PB20-2-024 - 2 pcs. R22 1280x1830x1860 1300

A heat pump is a machine that can transfer heat from a colder environment (air, earth, solar radiation, water from underground strata, water from open reservoirs, water from a common network, heat recovery, industrial waste water) to a hotter one (air, water and other). Under some conditions, a heat pump with a compressor having a 1 kW electric motor as a drive can provide a heat power of 3 to 5 kW, although it is known that the simple heat generation on a resistance with an electric power of 1 kW cannot exceed 1 kW. INSTALLATION APPLIED COMPRESSOR REFRIGERANT OVERALL DIMENSIONS, MM WEIGHT (NET), KG ТХУ6-4-0 “water-water” 5PB10-4-0 R142 1730х500х760 350 ТХУ-14 “water-water” 5ПБ10-2-024 R22 unit 1800х57014 780х570х2000 installation of 620 block of tanks 65 ТХУ24-4-0 "water-water" 5PB50-4-0 R142 2275х620х1010 840 НКТ5-4-9 "water-water" 5ПБ10-4-0 R142 2320х520х1130 560 НКТ10-4-9 "water- water "5PB20-4-0 R142 2285x560x1200 670

The compressor 2FVBS4 / II OM4 is one of the main elements of the refrigeration unit and is used to carry out a continuous refrigeration cycle by constantly aspirating the refrigerant vapor from the evaporator and compressing them to a condensing pressure. Designed to work as part of automated ship refrigeration units and air conditioners. NAME OF PARAMETERS \ MODEL REFRIGERATING COMPRESSOR 2FVBS4 / II OM4 Compressor type freon compressor vertical, piston, single-stage, bezreztskopfny glandless. Cooling capacity, kW (kcal / h) 5.2 (4500) Power consumption, kW 2.2 Volume described by pistons, m3 / h 20.6 Cooling capacity and effective power are indicated in the mode, ° C when working on R-12 in the mode: boiling point minus 15 ° С, condensation temperature 30 ° С, suction vapor temperature 20 ° С liquid temperature in front of the throttle device 25 ° С Type of built-in electric motor АПВ2-41-6Ф Electric motor power, kW 2,1 Supply voltage, V 380 Rod alternating current, 3-phase Current frequency, Hz 50 Diameter of cylinder, mm 67.5 mm Ho d piston, mm 50 mm Number of cylinders, pcs 2 Synchronous speed, s-1 (r / min) 16.7 (1000) Volume described by pistons, m3 / h 20.6 Refrigerant R-12 Brand of used oil ХФ12- 16 Amount of refilled oil, kg 2.5 ± 5% Weight (dry) of the compressor, kg 130 Overall dimensions (length x width x height), mm 595 x 370 x 455

COMPRESSOR HIGH PRESSURE UNITS of the EKPA-2/150 series are intended for forcing air into cylinders and automatically maintaining pressure in them within 150 kgf / cm2 or 200 kgf / cm2. Used: · to start diesel-electric units; · For filling cylinders of breathing apparatus. The installation consists of a compressor and an electric motor. The compressor is three-stage. Circulating pressure lubrication from gear pump. Cooling - with seawater from a vortex type pump. Installation management is automatic. Installations are made in tropical marine execution. At the request of the customer can be made in marine export or marine tropical designs. The automatic control and protection system provides: - automatic start-up of the installation at a system pressure of less than 80 kgf / cm2; - automatic stop at a pressure in the system of 150 or 200 kgf / cm2; - emergency stop when the oil pressure in the lubrication system is reduced to 0.5 kgf / cm2; - emergency stop when the air temperature rises after the refrigerator of the first stage to 60 ° C; - Alarms on the automatic control panel for each emergency stop.

Designed to work as part of refrigerators for cooling air or liquid refrigerants with condensers of water or air cooling. Units consist of a compressor, receiver, filter - dryer, instrument panel, pressure gauge shield, connecting piping mounted on the frame. NAME OF PARAMETERS \ MODEL REFRIGERATING UNIT AKP14-15 Cooling capacity, kW * 16.9 Power consumption, kW 5.8 Receiver capacity, l 15 Temperature for nominal operation, ° С To = minus 15 ° С Тk = plus 30 ° С Rated refrigerant R22 freon mode Units are also operable with R12, R502 freon agents. The range of units in other modes is boiling point, ° С - from 10 to minus 40; condensation temperature, ° С - up to 50; ambient temperature, ° C - from 5 to 40; water temperature for cooling the condenser, ° С - up to 33.

Crane air conditioners of the KK series with air-cooled condenser are designed to create a comfortable air temperature in the cabins of bridge electric, gantry cranes, and other industrial premises, ensuring the maintenance of the required temperature. The temperature control range is from + 12 ° С to + 30 ° С with an accuracy of ± 0.5 ° С, at an ambient temperature from -25 ° С to + 65 ° С on ozone-safe freon R-134a, and up to + 80 ° С on R-142 freon or ozone-safe freon. R-227 Used in coke, ferroalloy and metallurgical industries. Air conditioners are equipped with hermetic or semi-hermetic compressors of the world's leading manufacturers - Copeland, BOCK, and fans - EBM Papst, ZIEHL-ABEGG made in Germany. Air conditioning is controlled by a control panel, which includes a programmable controller. Air conditioners work from sources of alternating current 380V and direct current 220V. Additionally, air conditioners are equipped with an air heater.

NAME OF PARAMETERS \ MODEL AIR COMPRESSOR 4VU1-5 / 9M32 Final overpressure, kgf / cm2 8 Productivity, m3 / min according to the suction conditions: 5 compressed air: 0.56 Engine power, kW - Crankshaft rotational speed, rpm 735 Weight , kg 750 Overall dimensions, mm 1110 x 960 x 1110 Oil heating in the crankcase -

Designed for pumping air through gas purification units of nuclear power plants, transporting explosion-proof, toxic gases that do not contain droplet liquid and mechanical impurities. The gas blower is a rotational compressor machine made of stainless steel, driven by an electric motor through an elastic coupling. The gas blower can be operated at a suction gas temperature of -10 ° C to + 40 ° C. NAME OF PARAMETERS \ MODEL GAS BLOWING ROTARY E21-50-4A Max. pressure difference, kPa, mode 50 Productivity, m3 / min 1.44 Power of electric motor, kW 4.0 Weight, kg 240 Overall dimensions (length x width x height), mm 1085 x 520 x 510

Designed for the transport of air, toxic and aggressive to oil gases, non-corrosive to cast iron and structural steel, explosion-proof in the flow part and not containing droplet liquid and mechanical impurities. The gas blower is supplied driven by an electric motor through an elastic coupling. Delivery options with an explosion-proof or general industrial electric motor are possible. The gas blower can be operated in pressure or vacuum modes at an ambient temperature of -10 ° C to + 35 ° C. NAME OF PARAMETERS \ MODEL GAS BLOWING ROTARY 1G21-30-2V Max. pressure difference, kPa, pressure mode: 30 vacuum: 30 Productivity, m3 / min 4.32 Power of electric motor, kW 4.0 Weight, kg 285 Overall dimensions (length x width x height), mm 1050 x 450 x 545

Rotary compressor 12VF-M-30-0.6-1.5-2.2 VF compressors: 2VF, 12VF, 32VF and 34VF are designed for transporting air and gases non-corrosive to cast iron, structural steel and mineral oil. VF rotary compressors, compressors 2VF-M-70-21,5-1,5-45, 12VF-M-20-0,69-1,5-2,2, 32VF-M-60-22,1-1 5-45, 32VF-M-80-21.0-1.5-45 (32VF-21 / 1.8SM2U3), 34VF-M-30-38.2-1.5-45, 34VF-M- 40-37.4-1.5-45, 34VF-M-50-36.6-1.5-45 (34VF-37 / 1.5SM4U3) are used: in pneumatic transportation systems for bulk materials, air mail containers; in aeration systems of the sludge pools of treatment facilities, drinking water storage tanks, fish ponds; when spraying crops and gardens; during fire fighting; when removing dust in printing houses, foundries, filter plants; for driving various devices and mechanisms (grips, clamps). Compressor stations 2VF, 12VF, 32VF and 34VF are supplied with vertical and horizontal air flow direction. Compressors 2VF, 12VF, 32VF and 34VF consist of a compressor unit, a check valve, an electric motor, silencers and a noise-attenuating casing. Compressors operate in pressure and vacuum modes. Compressors rotary VF series are issued instead of earlier made compressors of grades 1A, 2AF.

Designed to supply air, not containing droplet liquid and mechanical impurities, into the pneumatic system for transporting grain, products of its grinding and other bulk solids. It is applied: at combines of bakery products; in mills, elevators; in feed mills. The compressor can be operated in explosive rooms with a dangerous concentration of dust at an ambient temperature ranging from -10 ° C to + 35 ° C. The compressor consists of a compressor unit, a safety valve and an electric motor located on a common base, which is also a silencer. NAME OF PARAMETERS \ MODEL COMPRESSOR GEAR 3AF49K52С Pressure difference, kPa 40 Productivity, m3 / min 1,54 Power el. engine, kW 2.2 Weight, kg 253 Overall dimensions (length x width x height), mm 1360 x 450 x 780

The Agromash Inter company offers pvc gate with a diameter from 40 mm to 160 mm. Gate valves are designed for installation as shutoff valves in various enterprises. They are a shutter made in the form of a sharpened plate. Due to the shape of the gate, on the one hand, the flow of liquids is completely blocked, and on the other, inclusions that may be contained in them are suppressed. The main task of the gates: shutting off the flow of working fluids in pipelines. Production material - PVC (PVC-U). Available gates of the following diameters: DN40, DN50, DN63, DN75, DN90, DN110, DN160. Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers washing nozzles with a diameter of 20 mm, 25 mm and 32 mm for a nozzle. Nozzles are designed for installation in a mechanical drum filter. Water supplied to the nozzle under a pressure of 2-4 atm. carries out cleaning of the filter mesh of the drum filter from adhering dirt, residues of feed, scales and other mechanical impurities. The nozzle is made of polymer materials resistant to aggressive environments. Thanks to the original design, it is easily disassembled for maintenance and installed on the pipeline. Price: 1 000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers a flotator of its own production for ultrasonic testing. • Flotator productivity: from 25 m3 per hour to 100 m3 per hour • The main task of the flotator • Removal of fine particles • Removal of organic residue Scope • Fish farms of ultrasonic testing • Owl Complete set • Stand • Aeration system • Compressor • Pump • Control cabinet Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers a sorting box for fry of own production. The sorting box for fry is intended for sorting fry • carp • trout • pike perch • clari catfish • tilapia • sturgeon • other types of fish Technical characteristics • the sorting box is made of polypropylene • has a wall thickness of at least 8 mm • Adjustable clearance from 1 to 20 mm Overall dimensions • Length - 320mm • Width - 387mm • Height - 220mm Price: 6,000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter

The company "Agromash inter" offers a ready-made engineering solution for fish farming in the UZV, with a capacity of 2 tons of finished products per year. High-quality equipment and modern water treatment technologies accompany the creation of a favorable environment for intensive breeding of high-quality fish products. The ultrasound module is supplied in the form of a kit that includes technological equipment, pipelines, electrical accessories. The kit includes technical information for the installation of equipment. If necessary, we carry out installation supervision. Price: 2,200,000 Contact person: Nikolay Aleksandrovich LLC Agromash inter

The company "Agromash inter" offers a ready-made engineering solution for fish farming in the UZV, with a capacity of 1 ton of finished products per year. High-quality equipment and modern water treatment technologies accompany the creation of a favorable environment for intensive breeding of high-quality fish products. The ultrasound module is supplied in the form of a kit that includes technological equipment, pipelines, electrical accessories. The kit includes technical information for the installation of equipment. If necessary, we carry out installation supervision. Key parameters: • Maximum one-time fish maintenance during rearing - 1200 kg • Maximum one-time fish maintenance during overexposure - up to 2000 kg • Area occupied by module equipment - 36 m2 • Total volume of water in the system - 34 m3 • Volume of fish breeding pools - 23 m3 • Average daily water change (per year) - 6% Price: 1,200,000 Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers trays for fry of own production for your fish farm. Bowls of trays are made of food grade engineering polypropylene. The material is resistant to various influences of hostile environments, such as acid, alkali and saline solutions. It also has resistance to ultraviolet radiation. All bowls are equipped with a protective flange. In addition, trays for larvae can be equipped with a bottom discharge, a pipe for supplying water, a system of saturation of water with oxygen. Our trays can be installed both indoors and outdoors. All products are made of environmentally friendly materials and have appropriate quality certificates. An official manufacturer's warranty is provided for all products! Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers for your fish farm a hatchery receiver for Weiss incubators of own production. The larva-receiver bowl is made of food grade engineering polypropylene. The material is resistant to various influences of hostile environments, such as acid, alkali and saline solutions. It also has resistance to ultraviolet radiation. All larvae are equipped with a bottom drain, a leveling pipe and a protective net. An official manufacturer's warranty is provided for all products! Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers oxygenators (oxygen cone) for your fish breeding complex. Productivity of oxygen cones is from 30 m3 per hour to 300 m3 per hour. Oxygenators are designed to saturate water with oxygen up to 300%. Oxygen cone (oxygenator) is made from durable fiberglass. Oxygen cones are used at ultrasonic testing enterprises (installations with closed water supply) for intensive cultivation of sturgeon, sterlet, bester, trout, and Russian sturgeon. Price: do not specify Contacts: Address: Russia, Belgorod st. Queen, 2 a, of. 621 Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers an oxygenator (oxygen cone) with a capacity of 100 m3 per hour for your fish breeding complex. The oxygenator is designed to oversaturate water with oxygen up to 300%. Oxygen cone (oxygenator) is made of stainless steel AISI304 (food grade stainless steel). Oxygen cones are used at ultrasonic testing enterprises (installations with closed water supply) for intensive cultivation of sturgeon, sterlet, bester, trout, and Russian sturgeon. A design feature is that the direction of water in the oxygenator is oriented from top to bottom. Due to the decrease in the flow velocity in the cone, an equilibrium is established between the lifting force of the oxygen bubbles and the water flowing down. Bubbles remain in suspension, thereby achieving optimal oxygen saturation of the water. The operating pressure in the oxygenator is controlled by a valve installed at the inlet. Price: 150 000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers an oxygenator (oxygen cone) with a productivity of 70 m3 per hour for your fish breeding complex. The oxygenator is designed to oversaturate water with oxygen up to 300%. Oxygen cone (oxygenator) is made from fiberglass. Oxygen cones are used at ultrasonic testing enterprises (installations with closed water supply) for intensive cultivation of sturgeon, sterlet, bester, trout, and Russian sturgeon. A design feature is that the direction of water in the oxygenator is oriented from top to bottom. Due to the decrease in the flow velocity in the cone, an equilibrium is established between the lifting force of the oxygen bubbles and the water flowing down. Bubbles remain in suspension, thereby achieving optimal oxygen saturation of the water. The operating pressure in the oxygenator is controlled by a valve installed at the inlet. Price: 80 000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers oxygenators (oxygen cone) for your fish breeding complex. Productivity of the oxygen cone is 30 m3 per hour. The oxygenator is designed to oversaturate water with oxygen up to 300%. Oxygen cone (oxygenator) is made of fiberglass. Oxygen cones are used at ultrasonic testing enterprises (installations with closed water supply) for intensive cultivation of sturgeon, sterlet, bester, trout, and Russian sturgeon. Price: 80 000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers for your fish farm an incubation apparatus of the tray type IL-4 Trout. The device is intended for incubation of sturgeon caviar and separation of viable larvae after hatching. In devices of this type, it is convenient to carry out all operations with caviar, as well as maintain free embryos and grow larvae until complete transition to active nutrition. The devices can be placed one above the other in 4 pieces. in a row. Water consumption is 0.005 l / s per 1 thousand eggs or from 0.17 to 0.2 l / s per 1 incubation tray. Price: 45 000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers the Sturgeon apparatus for your incubation workshop. The incubator is intended for incubation of sturgeon roe and separation of viable larvae after hatching. The principle of operation of the incubator: thanks to gusty normalized water supply, the fertilized, de-greased sturgeon caviar is continuously washed, simulating natural conditions. The sturgeon incubator, depending on the needs, can be equipped with 1, 2, 4, 6, 8, 16 trays. Each device is made of stainless steel, which is the key to long-term operation. Price: do not specify Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers for your fish farm the Sturgeon incubator for 16 trays. The device is intended for incubation of sturgeon caviar and separation of viable larvae after hatching. The principle of operation of the incubator is based on the fact that the fish box during the incubation process performs vertical reciprocating movements. As a result of these fluctuations, water entering the fish box through the mesh bottom and passing through the layer of caviar from bottom to top mixes the latter. Thus, the eggs during the incubation process are constantly in suspension, simulating natural conditions. Overall dimensions: Length-3470 mm Width-980 mm Height-1280 mm Weight-1160 kg The device is made of high quality materials, which is the key to long-term operation. Price: 490,000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers for your fish farm an 8-tray sturgeon incubator. The device is intended for incubation of sturgeon caviar and separation of viable larvae after hatching. The principle of operation of the incubator is based on the fact that the fish box during the incubation process performs vertical reciprocating movements. As a result of these fluctuations, water entering the fish box through the mesh bottom and passing through the layer of caviar from bottom to top mixes the latter. Thus, the eggs during the incubation process are constantly in suspension, simulating natural conditions. Overall dimensions: Length-2840 mm Width-980 mm Height-1280 mm Weight-580 kg The device is made of high quality materials, which is the key to long-term operation. Price: 270 000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers for your fish farm an 4-tray sturgeon incubator. The device is intended for incubation of sturgeon caviar and separation of viable larvae after hatching. The principle of operation of the incubator is based on the fact that the fish box during the incubation process performs vertical reciprocating movements. As a result of these fluctuations, water entering the fish box through the mesh bottom and passing through the layer of caviar from bottom to top mixes the latter. Thus, the eggs during the incubation process are constantly in suspension, simulating natural conditions. Overall dimensions: Length-1420 mm Width-980 mm Height-1280 mm Weight-300 kg The device is made of high quality materials, which is the key to long-term operation. Price: 135 000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter