Industrial Equipments and Machines in bulk on Qoovee

Separating propylene and propane by rectification is difficult due to the small difference in boiling points of the two components. However, rectification is absolutely necessary, although it requires the use of columns with a high reflux ratio and a large number of trays. The low boiling fraction components can be pre-separated in a separate column using propylene as a refrigerant to cool the reflux condenser, after which the final separation of propane and propylene can be performed in a large column, best divided into two sections, operating at ambient temperature.

Filters are devices for purifying liquid and gaseous substances from impurities and suspended particles. Filters are widely used in oil refining, gas, petrochemical industries, utilities, scientific research and technical laboratories. Liquid mesh filters for SZD pipelines and FSZh liquid mesh filters are actively used in industry. Mud collectors are widely used in public utilities.

Separator - an apparatus that allows you to separate the product into fractions with different characteristics. This equipment is actively used in oil fields and oil refineries. Mesh gas separator GS, oil and gas separator NGS, oil and gas separator with water discharge NGSV, flare separator FS are the main types of separators that are used in the oil industry. The devices differ in purpose, scope, operating conditions and technical characteristics: volume, nominal pressure, design temperature.

Hopper

Diesel fuel vessel

Vertical steel tanks - designed for receiving, storing, dispensing oil products and water, as well as other liquids, in various climatic conditions

Oil and gas separator oil and gas equipment that is used for degassing non-foamy oil during the extraction process and removing associated gas from it.

The travel heater is designed for heating oil products, oil emulsions, viscous oil during transportation through pipelines, at oil fields and oil treatment plants.

Sump is a storage tank used to collect liquids, as well as for their primary mechanical cleaning. Sediment tanks are used both on an industrial scale and in individual farms. At the stage of primary treatment, when sedimentation tanks are mainly used, mechanical impurities and suspended substances are extracted from the liquid under the action of gravitational forces, and biological treatment processes begin; when using the settler as a biocoagulator, fine and colloidal impurities are deposited, and sorption processes occur on the sludge particles. Oil sump is a special equipment designed to separate oil-water emulsion. In the separation process, oil is obtained, which is then collected, and formation water, which is discharged. Mechanical impurities and salts are removed from the raw material together with formation waters. Some oil settler designs also allow the removal of dissolved gas.

ND plunger metering pumps are designed for volumetric pressure metering of neutral and aggressive liquids, emulsions and suspensions. The area of application of pumps is determined by the resistance of the material of which the hydraulic part is made, as well as the resistance of the seal material.   LP metering pumps are positive displacement pumps. By the form of movement of the working bodies - reciprocating.   Pumps of the ND series are single-plunger (double-plunger), horizontal, single-acting, with a manually adjustable flow when the electric motor is stopped. Flow rate-100 l / h The pressure at the outlet of the pump is 250 kgf / cm 2 Order European quality at Ukrainian prices!

The scope of application of the membrane dosing unit is determined by the resistance of the materials of the flow path in the dosing medium and the design of the electrical equipment. The diaphragm pumping dosing unit NDR-2M can be used for dosing harmful substances, flammable and combustible liquids, provided that safety rules are observed. To increase reliability, the diaphragm metering pump NDR-2M is equipped with a double - layer diaphragm made of treated PTFE . Advantages of the diaphragm dosing pump NDR-2M 1. Tightness. During operation of the NDR-2M pump, leakage of the pumped and working fluid is completely excluded. 2. Possibility of regulation without stopping the pump. The design of the NDR-2M pump provides for flow adjustment during pump operation. 3. Simplicity of operation and maintenance.   In the NDR-2M pump, there is no need to constantly monitor the plunger seal and maintain this seal, as is done when using ND plunger pumps. 4. Wear-resistant valve. The diaphragm pump valves are specially designed for long-term operation in contact with aggressive media. Their service life is significantly longer than that of conventional LP pumps. 5. Ability to operate the pump at high pressures up to 100 MPa. Many diaphragm pump manufacturers cannot achieve this. 6. Membrane condition monitoring system. If the diaphragm is damaged, the monitoring system will report this. Even in the event of a diaphragm rupture, the pump remains operational until the end of the process. The signaling device can be both a pressure gauge and electronic devices that will report the problem to the control station. 7. Safety system In the event of a blockage in the outlet piping due to faults or errors, a built-in valve will protect the pump from overload. 8. Saving money Favorable price level achieved through our own production Technical specifications: Feed - 1000 (l / h) The pressure at the pump outlet is 25 kgf / cm 2 European quality - Ukrainian price!          

• Hot oil systems can easily reach temperatures higher than with heat carrier fluids such as water-steam. • The temperature can achieve 300°C at atmospheric pressure. • Thermal conductivity coefficients of oils are higher than of other fluids. • Thermal oil used as heat carrier in the system does not leave precipitants in the installation. • No corrosive effect. • Thermal oils do not require conditioning as in the steam systems.. • There is no risk of freezing. • It is highly efficient. Capacity: 100,000-10,000,000 kcal/h Temperature: Up to 300 ° C heat are PLC controlled systems.

• It is designed and manufactured to meet the needs of wood, textile, chemical, food and similar industrial facilities in the heating of large residential units. • Our boilers are manufactured with large steam volume to allow sudden steam usage. • Specially designed water holders are placed in the boiler to minimize the drag of the water droplets with steam. Thus, the steam going to the system is drier. • ISO 9001 quality management systems which form the basе of our quality, have been chosen as quality management model in respect to design, development, facility and service

Cooling pad: padding area made of corrugated paper, depth 60 mm, thickness 15 cm X60 groove height 150 cm Corrugated paper 60 mm deep and 10 cm thick X60 groove height 100 cm

thermostat Output: 10A dry contact power; input: 220V AC temperature range: -50.0 ° C & nbsp; 110.9 & deg; C control range: -50.0 & deg; ~ 110.9 & deg; accuracy: & plusmn; 0.1 & deg; C sense: & nbsp; NTC10K watertight sensor cable length: 1m lengths: 85x60x30mm

hygrostat output: 10A dry contact power input: 220V AC humidity measuring range: 0.0% to 99.0% control range: 0.0% 99.0% accuracy: ± 2% sensor cable length: 1m Dimensions: 85x60x30mm

Internal circulation fans transport moisture. Needs instant computer control. It should be able to be automatically controlled with. The circulating fan will be used throughout the entire greenhouse. Material: Stainless steel housing, wires and casing Metal 0.35 kWh : 1400 rpm Air flow: 5,700 m 3 / h Equipment: hanging chains and link Certificate: CE Standards

1.0 HP Pervane & ccedil; apı 1,270 mm < / span> Motor </ span> 1 hp < / span> 0 Pa hava akışı 36,180 m3 / h 25 Pa hava akışı 31,594 m3 / h 0 Pa spesifik performans 34.5 m3 / wh

; l & ccedil; controls target fogging. R & uuml; zg and rain sensors keep windows closed during stormy and rainy weather. & Uuml; can be remotely managed from computers and smartphones using a web browser . Any other senses you want (light, carbon dioxide) and control programs (fan, honeycomb, curtain, carbon dioxide) can be added for additional fee. THE DELIVERY IS IN 1 WEEK FROM THE DELIVERY RATE.

Double-column automatic band saw B-33 The machine is directly from the manufacturer. Full control during production, testing, packaging and delivery. The fastest and most reliable delivery route. An updated model that replaced the CNC saws H-300HA and GZK4233 from the famous Julihuang (JLH) factory. Specifications: ·          1 Maximum cutting range (mm)   330 × 330 × 330 (W x H) ·          2 Sawing speed (third gear) 10-80 m / min ·          3 Band saw blade specifications (length * width * thickness) 4115 * 34 * 1.1 mm ·          4 Feed rate Hydraulic infinitely variable speed control ·          5 Main motor power 5.0 kW ·          6 Hydraulic motor power 0.75 kW ·          7 Volume of hydraulic oil tank 70 l ·          8 Cooling pump motor power 0.75 kW ·          9 Coolant tank volume 100 l ·          10 Main drive type Worm gear ·          11 Workbench height 500 mm ·          12 Main drive mode Worm gear ·          13 Clamping method Hydraulic clamping ·          14 Belt tensioning method hydraulic ·          15 Method of cleaning from sawdust Wire brush ·          16 Dimensions of base unit (LxWxH) Approx.2250 × 1550 × 2300mm ·          17 Weight   1750 kg * The price is indicated including VAT 20% and delivery to St. Petersburg.   On the issues of order completion, the final cost, specification of the production time, as well as on the production of products to order - write and call, we will be glad to cooperate with you!

Buy Canon PF-04 Printhead from Arizaprint is 100% safe, because the purchase of products at Arizaprint provides official genuine products and 100% money back guarantee.To purchase online visit us :   Price : USD 168.00 Min Order : 1 Pcs Lead Time : 3 - 5 Days Port : CIV / Kualanamu International Airport Deli Serdang Terms : T / T, Western Union, Paypal, Money Gram Shipment : FedEx, DHL, UPS Product: Ori and Ready in stock

Buy HP Designjet 9000S Printhead from Arizaprint is 100% safe, because the purchase of products at Arizaprint provides official genuine products and 100% money back guarantee.To purchase online visit us :   Price : USD 340.00 Min Order : 1 Pcs Lead Time : 3 - 5 Days Port : CIV / Kualanamu International Airport Deli Serdang Terms : T / T, Western Union, Paypal, Money Gram Shipment : FedEx, DHL, UPS Product : Ori and Ready in stock

Buy KONICA 1024i MHE-D Printhead from Arizaprint is 100% safe, because the purchase of products at Arizaprint provides official genuine products and 100% money back guarantee.To purchase online visit us :   Price : USD 1.172.00 Min Order : 1 Pcs Lead Time : 3 - 5 Days Port : CIV / Kualanamu International Airport Deli Serdang Terms : T / T, Western Union, Paypal, Money Gram Shipment : FedEx, DHL, UPS Product : Ori and Ready in stock  

Buy Mimaki JFX200 Printhead from Arizaprint is 100% safe, because the purchase of products at Arizaprint provides official genuine products and 100% money back guarantee.To purchase online visit us :   Price : USD 915.00 Min Order : 1 Pcs Lead Time : 3 - 5 Days Port : CIV / Kualanamu International Airport Deli Serdang Terms : T / T, Western Union, Paypal, Money Gram Shipment : FedEx, DHL, UPS Product : Ori and Ready in stock

Buy Mutoh ValueJet VJ-1324 / VJ-1624 / VJ-1624W / VJ-1924W Printhead-DG-42987 from Arizaprint is 100% safe, because the purchase of products at Arizaprint provides official genuine products and 100% money back guarantee.To purchase online visit us :   Price : USD 644.00 Min Order : 1 Pcs Lead Time : 3 - 5 Days Port : CIV / Kualanamu International Airport Deli Serdang Terms : T / T, Western Union, Paypal, Money Gram Shipment : FedEx, DHL, UPS Product : Ori and Ready in stock

Buy Ricoh G5S (MH5220) UV Printhead - J35000 from Arizaprint is 100% safe, because the purchase of products at Arizaprint provides official genuine products and 100% money back guarantee.To purchase online visit us :   Price : USD 1.500.00 Min Order : 1 Pcs Lead Time : 3 - 5 Days Port : CIV / Kualanamu International Airport Deli Serdang Terms : T / T, Western Union, Paypal, Money Gram Shipment : FedEx, DHL, UPS Product : Ori and Ready in stock