Industrial Equipments and Machines in bulk on Qoovee

Application: The oils inside transformers are mainly used for insulation, in addition, they suppress corona discharge and arcs, and also act as refrigerants inside machines. These oils must be absolutely clean and dry to achieve and maintain optimum insulating properties and dielectric strength. This is where the need for transformer oil purification arises. The ASSEN ZYD Transformer Oil Purifier is the key to the reliability, performance and durability of the transformer. The insulating oil of the transformer must be free from moisture, dissolved gases and particles that accumulate as the oil ages. Even some new oils may require processing to limit their content to acceptable levels. Features: 1. Expectations of an efficient insulating oil treatment plant. 2. Suitable for oil treatment, oil vacuum injection and hot oil cycling in the installation and maintenance of large power transformers. 3. Simple and trouble-free operation. 4. Online measurement and recording of process parameters. After treatment Moisture PPM 3 Gas content% 0.01 Impurity size µm ≤ 1 (no free carbon) Breakdown voltage kV ≥ 75 IFT dyne / cm ≥ 40 Acid number mgKOH / g ≤ 0.03 Dielectric loss factors tan δ (90 ° C) ≤ 0.001 ASSEN warrants a unit supplied in accordance with this specification against defects in material and workmanship under normal use and service for a period of twenty-six (26) months from date of shipment or twenty-four (24) months after start-up. systems. ... ASSEN's obligations under this warranty are limited to repairing or furnishing a similar part to replace any part proven to be defective during the warranty period. 1. We customize the machine according to your requirements. 2. We have over 20 years of export experience. 3. We offer our customers high quality products at a competitive price. 4. We offer excellent after-sales services to our customers. 5. We are not satisfied until our customers are satisfied.

Brook electric motor (England) WDA112MB-4 112 5.5 kW 1450 rpm feet new shaft 28mm-17.000 rubles Electric motor Wilmann Z112M-2 4.0 kW 2890 rpm paws new-14.000 rubles electric motor Wilmann Z112M2-4 5.5 kW 1435 rpm shaft 28mm-17.000 rubles no bargaining! in the presence of many different motors call / specify

electric motor Wilmann Z112M-2 4.0 kW 2890 rpm paws new shaft 28mm-14.000 rubles without bargaining! in the presence of a large number of motors! call to specify!

Diode bridge VAZ-2110-12 gen. 9402, 9412 (Orbit) Article: BVO 3 105-01 Manufacturer: Orbit

Brazil Santos 100% Arabica is a true classic from Brazil in beans. Perhaps this is the most popular type of coffee, which has a mild pleasant taste with notes of nuts, caramel and chocolate, without acidity. Medium roast. Convenient packaging - a multi-layer quadropack bag with a zipper and a degassing valve - the most perfect packaging for coffee at the moment, not only will it retain its aroma and taste for a long time, but will also make it convenient to pour and store coffee. It is perfect for preparing in a professional or automatic espresso machine, a geyser coffee maker, as well as alternative methods - for example, in a pourover. Below is one of the recipes for brewing this coffee. Espresso recipe: Coffee bookmark: 18 grams. We adjust the grinding so that when it spills for about 27 seconds, 37 grams of the finished drink (from the cream) are obtained at the exit. Store coffee at a temperature no more than 25 degrees and a humidity of no more than 75% in a dry and cool place.

The company strictly implements enterprise standards (CH series hot-melt pipe butt joint machine Q / ZJCH 002-2017; plastic pipe hot-melt butt joint Q / ZJCH 001-2017). The products have been tested by the national authority, and the mechanical properties are rationalized Frequency: 50-60HZ Welding Area: ≤ Pipe wall thickness Dimensions: 1000-1200mm Usage: Plastic Welding,Fitting Warranty: 1 year, 1 Year

Our relation with this estate goes back to the days when our founder (with literally no money) hopped on to bikes and traveled to this estate just to establish a strong direct and transparent bond. Roasting Profile- Espresso Varietal- SLN-795 Altitude- 1524 MASL Process- Washed Harvest Year- 2020-21 Tastes Like- White Chocolate, Hint Of Clove And Caramel Location- Chikmagalur

YH-116AE : Fully Electronic Covering Machine * Taking the highest electronic technology to change from mechanical type into fully automatic computerized operation. * Operation become simple, the consumption of machine parts was reduced noise is less and the data output from the computer is accurate.   Introduction:  Elongation, twisting , tension of take up tube and tension of take up Forming all are taking high technology servo motor with PLC control , Meantime, machine running with gear belt type which has the highest quality.  Machine noise is less and speed increasing due to use gear type belt instead of metal gear.  Using delicate servo motor, the products twisting range can be higher than using metal gear.  Using delicate electrical forming device, the take up tube forming range can be adjusted easily and widely, the forming edge can be softer.  Machine layout: 2500 + (1840 x N) x 1500mm x 2200mm N = No. of section

WE ARE PROVIDING PROJECT BASED OFFERS THEREFORE THE PRICES WERE WRITTEN REPRESENTATIVE. FOR MORE INFORMATION, YOU CAN GET INFORMATION FROM +90 535 718 10 71 PHONE NUMBER.

P01854-3 Features 1. Reducer: Heavy duty machinery reducer. 2. Break System: Pull down the release lever, rolling door will close down. 3. Limited Switch: Combine with 2 limit switch for higher rolling door.   Specification: Model     D20 Horsepower    2HP/1.5kw Poles       4 Voltage    3Ø-220V/380V Ammeter 5.77A/3.34A Load        1800KG/6” Weight    69KG Dimensions     730×290×470 DecelerationRatio  120 RPM 60HZ/14.2RPM Driver Gear / Driven Gear      Double Gear 60×15T→60T Single Gear 80×12T→46T

P00663                          Pai-Hong Sliding Gate Operator (also referred to as slide gate openers or slide gate motors) is suitable for Residential, Commercial and industrial use, command a modernization of convenient lifestyle. The demand for high technology, versatility and reliability is the trend today. If you are looking for a gate operator that manipulate gates by sliding them left or right horizontally along a track a Slide Gate Operator is a great fit for your needs. Worm gear driven with manual override and weatherproof feature ensure long lasting and convenient usage.   For your safety, the safety edge is optional. It will stop and reverse if is encounters an obstruction on closing and stop when it encounters an obstruction on opening.

Founded in 1954 Torin produces quality automotive products for service professionals.

Founded in 1954 Torin produces quality automotive products for service professionals.

Founded in 1954 Torin produces quality automotive products for service professionals.

Founded in 1954 Torin produces quality automotive products for service professionals.

Founded in 1954 Torin produces quality automotive products for service professionals.

Characteristic: Mixing feeds evenly and making them into grits, which can avoid the waste of feeds, money, time, and size is adjustable. Integrate operation from mixing feeds to making grits means time saving and convenient.   Direction: Pour feeds into the stirring bucket, and mix thoroughly with proper amount of water (or vitamin or other nutriment). After mixing thoroughly (2 ~ 3 minutes), adjust the outlet of the stirring bucket to a proper location and turn on the switch of machine. (With larger outlet, the grain would be longer; with smaller outlet, the grain would be shorter.) With these steps, the manufacture of grain can be accomplished.   Caution: The machine must be cleaned after using. Be aware of losing the oil of variable speed motor.

HDPE Geomembrane Pond Lining If you are interested in this product, please send us your requirements. & nbsp; Feature: < / span> Reduced pond cleaning time, no tillage, increased nesting frequency. Reduce pollution and reduce the risk of disease. More efficient aeration , saving energy. Prevent mixing feed with soil, reducing feed loss. No tillage required, especially suitable for sandy and acidic soils, less lime is used. < span lang = "EN-US"> Water quality can be monitored and improved. < p class = "MsoNormal"> The shrimps could not hide inside the soil during harvest, increase yields and be more productive. One-time investment over 10 years of life.

Feed Size from 0.5~3MM   Characteristic: Double powerful blowing outlets blow feeds far and covers wide area. Single roller distributor can adjust required feeding quantity. Exclusively centrifugal motor. Adopt multi-bladed and aluminum-bladed fan with stable operating. Can be fitted with timer. Applicable for feeding any kind of fish. Stainless steel housing, weather proof and high durability.

Specification: Pressure Performance Table Pressure Performance Curve Noise Level Outline Dimension Structure & Material List Typical Applications   Characteristic: Wide range for air volume, pressure and vacuum. Bore: 25A ~ 300A (1"~12") Capacity: 0.1 ~ 120m3/min. Pressure: 0 ~ 8,000mmAq Vacuum: -5,000mmAq Stable air flow and less pressure variation. Clean air not with oil moist. Solid construction, easy maintenance. Bearings are all lubricated by oil moist, high durability. Made under "ISO9001" system.

SUS316 Material Bore 2" - 8" High Head Large Volume Sea Water Use   Features: Model CT-C pump, pump body, pump up water impeller and enter water access cap, quarry SUS316 cast materials, the axis is a SUS316 material, the mechanical axle seals VFA and VTSIC(Tungsten) material, corrosion-resistant, the stability is high, can give play to extremely high function and lift-span.   Application:  Sea-farming, shipping.

Characteristic: Allowing oxygen transfer into the water quickly. Increase higher efficiency of oxygen transfer, excellent water mixing and circulation pattern. Decomposes harmful material or gas. The circulating water will reactivate with the bottom of the pond, establishing and maintaining a better water quality for the shrimp or fish. Best equipment to be used together with the Paddlewheel Aerator. Farms or ponds, which culture shrimp, fish and any kind of Aquaculture. Treatment for waste water.

Characteristic: Rotation design improves oxygen-content of water, harmful gases escape by water-circulation. Enhance the exchange of gases with the atmosphere and obtains the strongest water current. The unique Aerator Motor Made Under "ISO9001" And "ISO14001" System Suitable for various kind of aquaculture pond : fish, eel, clam, crab, etc.

Characteristic: Providing substantial and stronger water current to improve pond water circulation and oxygenation. With more impellers than normal model, which can benefit a large breeding area, thus, less power consumption and less investment cost. Few aerator is needed, reduce maintenance and labor costs. With diesel engine drive, especially suitable for area without electricity support and for emergency use. "100% New Raw Materials" are guaranteed to be used in our products.

Characteristic: Best Quality Silicon Steel Plate. Energy Saving. High Oxygenation Performance From Unique Design. Sturdy Stainless Steel Frame Ensure Without Any Deformation. Easy Maintenance. The Unique Aerator Motor Made Under "ISO9001"And "ISO14001" System. "100% New Raw Materials"are guaranteed to be used in our products.   Note: Since May 2017 Our New 1 HP / 2 HP three-phase high efficiency electricity saving motors Will Be Launched.  Feel free to contact us if you are interested in our new product.

Mainly Designed For Lake & Sea. Be Able To Be Used For Harvest. Resist Maximum to 6M Wave. Still Very Strong And Working Well During Typhoon. Having Good Feedback From The Biggest Tilapia Farm In The World And Other Governmental Projects.   Function: Marine cage farming system can be used in various water environments including lake, sea and river, etc. Suitable for intensive farming. Suitable for different species, such as Tilapia, Japanese Sea Bream, Goldlined Sea Bream, Cobia, Greater Amberjack, Blue-Banded Sea Perch, Spangled Emperor (Sand Snapper, Parrot-Fish), Snappers, Yellow-Wax Pampano, Orange-Spotted Grouper, Red Drum, Catfish, Striped bass, Bluegill sunfish, Crappie, Carp, etc.   Characteristic: "One-Piece Injection Molded" HDPE 80 Bracket, extremely sturdy. HDPE 80 Floating Pipe and HDPE 100 Handrail Pipe offer excellent ESCR (Environmental Stress Cracking Resistance) and resist deformation. High carbon component, strong UV resistance ensures sound durability, low maintenance and investment cost. Removable Handrail T Bar makes more easily assembling, simplified harvesting & efficient maintenance as well as resistant to corrosion. Heavy duty standing pole. Bear heavier net weight. All the "Round" and "Square" shape cages can be tailor-made.

Part Number : RL-800 Description: electrical and mechanical Mount method: side mounted Aux. contact: 2N/C Model suitable: RAB-88T ~ 450T Riken Electric Co. Ltd manufactures protection and controlling equipment for electrical application and electricity systems in Taiwan and is an ISO-9001:2000 Quality Management System approved company.  

Part Number : RA1-T11 Mount method: upper mounted Aux. contact structure: N/O :1 N/C: 1 Model suitable: RAB-A12 ~ A36 Riken Electric Co. Ltd manufactures protection and controlling equipment for electrical application and electricity systems in Taiwan and is an ISO-9001:2000 Quality Management System approved company.  

Model:  RAB-88T Capacity: Three phase 220 V  HP : 35 / KW : 26 Three phase 380/440 V  HP : 70 / KW : 50 Auxiliary contact structure:  2a 2b Enclosure dimension: L 302 / W 200/ H163 Riken Electric Co. Ltd manufactures protection and controlling equipment for electrical application and electricity systems in Taiwan and is an ISO-9001:2000 Quality Management System approved company.  

electric motor new EMC Italy 7.5 kW 1440 rpm paws -18.000 rubles many other motors Siemens VEM ABB WEG ADM are available the prices are high and there is no bargaining !!! write / call / specify ... Moscow vatutinki kaluzhskoe highway

1.      Type: SQH-10 2.      W: 10 3.      RESISTANCERANGEΩ:  SQH: 0.5Ω~100 Ω  MO+SQH: 101Ω~50KΩ 4.      DIMENSIONS(mm): L±2: 48.0 H±1: 10.0 W±1: 10.0 S±1: 33 H±1: 21 P1±1: 12 P2±1: 6 P3±1: 8.0 P4±1: 3.0 D: 4 Founded in 1986, Jinwell manufactures high power resistors and automotive LED lights. In order to build up the long relationship to Customer and opening our service to customers, we always bring the best service to reach Customer demands.  

1.        Core Box Size (LxHxW) mm: 600x400x300 2.        Max. Core Size (LxHxW) mm: 520x380x300 3.        Operation Mode: Manual/Single Cycle/Auto Cycle 4.        Production Speed: 40 - 70 seconds/cycle, depends on size and shape of products 5.        Heating Type: LPG or Electrical 6.        Max. Blowing Capacity: 1 15-30 kgs 7.        Sand Storage Capacity: 200-300 kgs 8.        Operation Pressure: 5-6 kgs/cm2 9.        Sand Blowing Pressure: 1-4 kgs/cm2 10.    Weight: 2900 kgs 11.    Dimension(m): 2.5x3.7x3.3

1.        Core Box Size (LxHxW) mm: 500x400x250 2.        Max. Core Size (LxHxW) mm: 420x380x200 3.        Operation Mode: Manual/Single Cycle/Auto Cycle 4.        Production Speed: 40 - 70 seconds/cycle, depends on size and shape of products 5.        Heating Type: LPG or Electrical 6.        Max. Blowing Capacity: 15-25 kgs 7.        Sand Storage Capacity: 200-300 kgs 8.        Operation Pressure: 5-6 kgs/cm2 9.        Sand Blowing Pressure: 1-4 kgs/cm2 10.    Weight: 2700 kgs 11.    Dimension(m): 2.1x3.5x3.1

1. Power: 5-7.5 HP 2. Core loading size (m / m): 400 X 330 3. NOT. blades: 3 4. Weight (kg): 350 kg 5. DShV (m / m): 110 X 800 X 140 6. Productivity (kg / h): 500 kg / h

1. Maximum. Core size (L x H x W): 480x260x250 mm 2. Operating mode: manual / single cycle / automatic cycle 3. Production speed: 40-70 seconds / cycle, depending on the size and shape of the product. 4. Heating type: Electric 5. Maximum. Blow: 6 kg 6. Sand storage capacity: 15-20 kg 7. Working pressure: 5-6 kgf / cm2 8. Sand blowing pressure: 2-5 kg / cm2 9. Weight: 2700 kg 10. Size: 2600 x 2300 x 2600 mm

1. Maximum. Core size (L x H x W): 480 x 260 x 250 mm 2. Operating mode: manual / single cycle / automatic cycle 3. Production speed: 40-70 seconds / cycle, depending on the size and shape of the product. 4. Heating type: Electric 5. Maximum. Blow: 6 kg 6. Sand storage capacity: 15-20 kg 7. Working pressure: 5-6 kgf / cm2 8. Sand blowing pressure: 2-5 kg / cm2 9. Weight: 2700 kg 10. Size: 2600 x 2300 x 2600 mm

1. Model: KM-1 2. Maximum. core box size: 160 x 220 mm 3. Maximum. t. core: 350 cubic meters. 4. Debit: 100-150 pcs / hour 5. Required air pressure: 3-5 kgf / cm2 Kao Kuen Industrial Co., a professional manufacturer of rod firing and molding machines, has accumulated solid knowledge and experience in creating the most efficient, economical and durable machines for over 30 years.

1. Size of the main box (L x H x W): 500 x 400 x 300 mm 2. Maximum. Core size (L x H x W): 420 x 380 x 250 mm 3. Operating mode: manual / single cycle / automatic cycle 4. Production speed: 40-70 seconds / cycle, depending on the size and shape of the product. 5. Heating type: LPG or electric 6. Maximum. Blow: 15-25 kg 7. Sand storage capacity: 200 - 300 kg 8. Working pressure: 5-6 kgf / cm2 9. Sand blowing pressure: 1-4 kgf / cm2 10. Weight: 3200 kg 11. Size: 3100 x 2500 x 3650 mm

1. Core box size (L x H x W): 500 x 300 x 250 mm 2. Maximum. Core size (L x H x W): 420 x 280 x 200 mm 3. Operating mode: manual / single cycle / automatic cycle 4. Production speed: 40-70 seconds / cycle, depending on the size and shape of the product. 5. Type of heating: LPG or Electrica 6. Maximum. Blowing: 15-25 kg 7. Sand storage capacity: 200-300 kg 8. Working pressure: 5-6 kgf / cm2 9. Sand blowing pressure: 1-4 kgf / cm2 10. Weight: 2400 kg 11. Dimensions: 2010 x 3340 x 2850 mm

1. Core box size (L x H x W): 550 x 400 x 300 mm 2. Maximum. Core size (L x H x W): 470 x 380 x 250 mm 3. Operating mode: manual / single cycle / automatic cycle 4. Production speed: 40-70 seconds / cycle, depending on the size and shape of the product. 5. Type of message: LPG or electric 6. Maximum. Blowing: 15-30 kg 7. Sand storage capacity: 200-300 kg 8. Working pressure: 5-6 kgf / cm2 9. Sand blowing pressure: 1-4 kgf / cm2 10. Weight: 2500 kg 11. Dimensions: 2010 x 3340 x 2850 mm