Industrial Equipments and Machines in bulk on Qoovee

Our company produces chopsticks. Material of manufacture - birch.

Our company will deliver high voltage AC disconnectors RV, RVZ, RVF, RVFZ on time and with quality. They are used in AC power grids with a frequency of 50-60 Hz, for a rated voltage of 10 kV. High voltage AC disconnectors RV, RVZ, RVF, RVFZ are used in AC power grids with a frequency of 50-60 Hz, for a rated voltage of 10 kV: to close / open sections of a high voltage electrical circuit (energized) in the absence of load current or for transformation of the connection diagram; for the formation of a visible open circuit for the safe conduct of work in an isolated area; for connecting and disconnecting charging currents of air and cable lines, idle current of transformers and currents of low loads; Earthing switches of the ZR series (earthing switch ZR) for a voltage of 10 kV are used for earthing the phase-shielded currents disconnected from the power supply elements in the alternating current circuits. Prices and delivery times depend on the model and place of delivery.

The company LLP "Electrosnab-EM" will deliver on time and with quality VNA load switches. VNA load break switches are designed to turn on and off under load sections of three-phase alternating current circuits with a frequency of 50-60 Hz, a rated voltage of 6 (10) kV, as well as grounding disconnected sections using earthing switches. In the off position, a VNA load switch creates a visible break in the electrical circuit. Load break switch VNA-L-10 / 630-20z U2 is installed in switchgear cabinets and complete transformer substations. The arc is extinguished by the flow of gases released from the walls of the arc-extinguishing chamber when they are exposed to the extinguishing arc. The control is carried out by a separate mechanical drive connected to the load break switch by a mechanical transmission. The exact price depends on the series and the place of delivery.

The company LLP "Electrosnab-EM" has the ability to deliver on time and with high quality MICOM protection relays. The characteristics of the MiCOM P123 terminal allow easy adaptation of the relay to various applications and operating conditions. The powerful yet simple interface on the front panel of the terminal and the MiCOM S1 software allows the user to easily configure the terminal, access the information stored in the terminal for easy commissioning and post-fault analysis. The choice of the communication protocol built into the relay allows it to be integrated into substation control system or SCADA system. The MiCOM P123 terminal is available in a 4U case for panel or cassette mounting, the width of the case is 20T. The price and delivery time depend on the series and place of delivery.

The Elektrosnab-EM LLP company will deliver the VBSK vacuum switches on time and with quality. Vacuum circuit breaker VBSK-10-20 / 1000 UHL2, U3. Purpose and scope of the vacuum circuit breaker. The vacuum circuit breaker is designed for switching electrical circuits during normal and emergency modes in three-phase alternating current networks with an isolated neutral of 50 Hz. The vacuum circuit breaker is installed in the switchgear cabinets, and the vacuum circuit breaker is also used to replace low-oil circuit breakers. The vacuum circuit breaker complies with the requirements of GOST 687-78, GOST 18397-86 The price and delivery time depends on the series and the place of delivery of the goods.

The company LLP "Electrosnab-EM" has the ability to deliver air circuit breakers LS Metasol on time and with quality. Air circuit breakers are manufactured in housings of three standard sizes, differing in width. The height and depth of all enclosures are the same, which allows efficient use of the usable cabinet volume. Air circuit breakers are designed: • to protect power distribution lines • protection of electric motors and control circuits • control and shutdown air circuit breakers. Metasol has a complete set of all necessary functions: overcurrent protection, coordination with other protection devices, monitoring of the supply network, measurement, diagnostics, analysis and data transmission. The exact price depends on the series and the place of delivery.

Our company will supply Siemens vacuum circuit breakers on time and with quality. Vacuum circuit-breaker - a high-voltage circuit-breaker in which vacuum serves as a medium for extinguishing an electric arc. The vacuum circuit breaker is designed for switching (on-off operations) of electric current - rated and short-circuit currents (SC) in electrical installations. The price depends on the series and the place of delivery of the goods.

The company "Electrosnab-EM" LLP will deliver Andeli's automatic switches on time and with high quality. Automatic circuit breakers of the Automatic AW 45 3P 630-4000A series of withdrawable Andeli are air circuit breakers with a mechanism for free release and operation of contacts by means of a mechanism with a spring energy storage. Structurally, the switch is made in the form of a mechanical structure mounted on a rigid frame. The main controls and indications are displayed on the front panel. A complete set of accessories to expand functions. The exact price depends on the series and the place of delivery.

Transformers of this type are made in a hermetically sealed design with full oil filling. Temperature changes in the oil volume are compensated for by changes in the volume of the corrugated walls of the tank due to their plastic deformation. The advantage of sealed transformers is that the oil does not have direct contact with the atmosphere, excluding moisture absorption from the environment. Power transformer is a stationary device with two or more windings, which, by means of electromagnetic induction, converts an AC voltage and current system into another AC voltage and current system. , as a rule, different values ​​at the same frequency in order to transmit electricity without changing its transmitted power. Power transformer is a stationary device with two or more windings, which, by means of electromagnetic induction, converts an AC voltage and current system into another AC voltage and current system, as as a rule, different values ​​at the same frequency in order to transmit electricity without changing its transmitted power. The price and production time depend on the configuration and place of delivery of the goods.

The company LLP "Electrosnab-EM" delivers transformers of the TM / TMG / TSL type on time and with quality. Transformers of this type are hermetically sealed and completely filled with oil. Temperature changes in the oil volume are compensated for by changes in the volume of the corrugated walls of the tank due to their plastic deformation. The advantage of sealed transformers is that the oil does not have direct contact with the atmosphere, excluding moisture absorption from the environment. Power transformer is a stationary device with two or more windings, which, by means of electromagnetic induction, converts an AC voltage and current system into another AC voltage and current system. , as a rule, different values ​​at the same frequency in order to transmit electricity without changing its transmitted power. Power transformer is a stationary device with two or more windings, which, by means of electromagnetic induction, converts an AC voltage and current system into another AC voltage and current system, as as a rule, different values ​​at the same frequency in order to transmit electricity without changing its transmitted power. The price and production time depend on the configuration and place of delivery of the goods.

The company "Electrosnab-EM" LLP will supply electrical equipment: a dry power transformer of the TSL and TSLZ series for voltages of 6-10 kV with a capacity of 25 to 2500 kVA. Cast resin dry-type transformers are specially designed for installation in embedded substations. This type of transformer is characterized by reduced dimensions, low noise level, resistance to seismic influences with a force of 9 points (on the MSK-64 scale). The price and production time depend on the configuration and place of delivery of the goods.

Our company is a manufacturer of single-sided distribution panels of the series SCHO-70 and can deliver this product on time and with quality. Distribution panels for one-sided service of the SCHO-70 series are used to receive, distribute and protect lines from overloads and short-circuit currents of outgoing lines. They are intended for completing switchgears (RU) of three-phase alternating current 380/220 V, 50 Hz, networks with a solid-grounded neutral and installation inside electrical premises. The price and production time depend on the configuration and place of delivery of the goods.

The company LLP "Electrosnab-EM" is a manufacturer of the complete outdoor switchgear KRN-IV Complete outdoor switchgear KRUN-6 (10) of the KRN-IV-10 series is designed to receive, distribute, meter and protect electrical networks alternating current with a frequency of 50 Hz with a voltage of 6 (10) kV. KRUN-6 (10) is operated without permanent maintenance personnel. KRN-IV-10 are intended for completing and expanding KTP-35 / 6-10, stand-alone RU-10 (6) kV. Delivery of KRN-IV-10 assembled to frame as a single block up to 3-6 cabinets for 10 (6) kV switchgears of full factory readiness (with input circuits, lines, sectional switch with ATS, TSN, VT). KRUN-6 (10) are intended for use in power supply systems for mechanization of construction. production time depends on the configuration and place of delivery of the goods.

The company "Electrosnab-EM" LLP is a manufacturer of high-voltage cells of the YAKNO type and has the ability to deliver these goods on time and with good quality. The high-voltage cell of the YAKNO type of outdoor installation is intended for repair purposes and replacement of previously manufactured switchgears that provide power to the electrical equipment of rotary complexes of mining excavators installed in branch networks of open pits, as well as at the points of connection to intra-pit overhead power lines and sectional cells of rural power grids with a voltage of 6 (10 ) kV, with a frequency of 50 Hz. The price and production time depend on the configuration and the place of delivery of the goods.

Our company will manufacture and supply KSO-366 with busbar bridges designed for completing closed switchgears with a voltage of 6 and 10 kV three-phase alternating current with a frequency of 50 Hz with an insulated neutral. The price and production time depend on the configuration and place of delivery of the goods.

The company LLP "Electrosnab-EM" will manufacture and supply an input-distribution device under the order. The ASU of a residential and / or public building is intended for use in a network with a voltage of 380/220 V of three-phase alternating current with a frequency of 50 Hz in networks with a solid-grounded neutral, to protect lines during overloads and short circuits. Prices and delivery times depend on the power and equipment of the goods, as well as the place supplies

Our company can quickly supply diesel generators with a choice of engines and current generators made in Turkey with a capacity from 95 to 2500 kVA. Prices and delivery times depend on the capacity and configuration of the goods as well as the place of delivery

Our company will manufacture and supply Chambers prefabricated one-way CSR service on time and with high quality. Prefabricated chambers of one-sided service KSO, are designed to receive and distribute electrical energy of three-phase alternating current with a frequency of 50 Hz, rated voltage up to 10 kV in networks with isolated or compensated neutral and can be used for completing switchgears of closed transformer substations and distribution points. Prefabricated chambers of one-sided service KSO are manufactured in accordance with the requirements of technical specifications ST AO-00010033-004-2007; GOST 22789-94 and GOST R 51321.1-2000.

Our company is a manufacturer of transformer substations KTP and can deliver this product on time and with quality. Complete transformer substations of the KTP 25-250 series with a capacity from 25 to 250 kVA are single-transformer substations of a dead-end type of outdoor installation and are used to receive electrical energy of three-phase alternating current with a frequency of 50 Hz, a voltage of 6 and 10 kV, converting it into electricity with a voltage of 0.4 kV and supplying it to consumers. Pole-type package transformer substations with a capacity from 25 to 250 kVA are designed in the form of a structure containing a high-voltage water cabinet, a low-voltage cabinet and a platform for installing a transformer. Transformer type TM (or TMG) ​​is installed openly and protected from atmospheric precipitation by a canopy. The KTP is connected to the network through a disconnector, which is supplied as a set.

Our company is a manufacturer of a KTPG-type transformer and is ready to deliver this product on time and with high quality. Complete transformer substations are single-transformer substations for outdoor installation and are used to receive three-phase alternating current electricity with a frequency of 50 Hz with a voltage of 6 or 10 kV, convert it into electricity with a voltage of 0.4 kV and supply it to consumers (including oil refining facilities) in the regions with a temperate climate (from - 40 ° С to + 40 ° С). A transformer substation is an electrical installation designed to receive, convert (increase or decrease) voltage in an alternating current network and distribute electricity in power supply systems to consumers in rural, township, urban, industrial facilities. Consists of power transformers, switchgear switchgear, automatic control and protection devices, as well as auxiliary structures.

The company LLP "Electrosnab-EM" will manufacture and deliver on time and with high quality. 10 kV in networks with isolated or compensated neutral and can be used for completing switchgears of closed transformer substations and distribution points. Prefabricated chambers of one-sided service KSO are manufactured in accordance with the requirements of technical specifications ST AO-00010033-004-2007; GOST 22789-94 and GOST R 51321.1-2000.

The company LLP "Electrosnab-EM" will produce and supply block transformer substations of various capacities in time and with high quality. Block transformer substations (BKTP) are a comprehensive solution to the customer's tasks for reliable and high-quality power supply of facilities. Easy to install, reliable, easy to operate and perfect in performance. BKTP serve for the reception, transformation and distribution of three-phase alternating current with a frequency of 50 Hz with a voltage of up to 20 kV using domestic and / or foreign electrical equipment with air and SF6 insulation. Designed for power supply of housing and communal, public, industrial and agricultural facilities, individual building sites and cottage settlements. BKTP are operated without permanent maintenance personnel.

Product Description Cut precision graphics from vinyl, window tint, twill, sandblast mask and more 30″, 40″, 54″ and 64″ models available Roland CutStudio software included to get started right out-of-the-box Combining precision and performance with Roland’s legendary reliability, CAMM-1 Pro GX Series vinyl cutters are the ideal choice for contour cutting a wide range of materials, including vinyl, heat transfers and printed graphics. With speed, accuracy and powerful downforce, GX vinyl cutters deliver the unstoppable performance and outstanding results busy shops need to produce high-quality signs, apparel, vehicle graphics and more. Distinguishing Features 36”, 46”, 54” and 64” models available Cut at up to 33 inches per second with high-precision Max down force of 350 grams CutStudio software included GX-640 includes overlap cutting to enable cutting of thicker substrates such as diamond-grade reflective vinyl Three-Year Warranty More Power, Finer Details GX vinyl cutters use digital servomotors for maximum accuracy and cutting speeds up to 33 inches per second. These professional-grade cutters also feature a curve-smoothing function that allows precise cutting of fine details, even at high speeds. Downforce of up to 350 grams ensures high cutting performance even on thicker substrates. The result is faster production and better-looking graphics on a wide variety of materials, day-in and day-out. CutStudio Included Bundled with any GX Series cutter, Roland CutStudio software allows designers to quickly and easily enlarge, reduce, re-position, rotate and mirror images. BMP, JPG, STX, AI, and EPS file formats are all supported. Optional Film Design Packed with design features, Film Design supports all brands of automotive window film, offering access to more than 2,000 window film pattern kits for use with over 1,000 different vehicles. Even More Advanced Features Included with the GX 640 OVERCUT for perfect corner cuttingThe GX-640 easily cuts vinyl and polyurethane materials, plus a myriad of textile fabrics for decorated apparel. The OVERCUT feature cuts thicker materials by adding a margin of 1mm to the beginning and end of a vector. This ensures precise corners and accurate cuts.OVERLAP for cutting thicker materialsFor the thickest and most difficult materials, the GX-640 offers an OVERLAP feature that can cut the same graphic up to 11 times, applying steady pressure for precise, complete cuts. Three-Year Trouble-Free Warranty Roland offers unmatched reliability and support with the best post-sales care in the industry and an unprecedented Three-Year Trouble-Free Warranty included with all GX cutters. Roland DG proudly holds international ISO certifications as recognition of exceptional quality. MODEL GX-300 GX-400 GX-500 GX-640 Cutting method Media-movement method Driving method Digital control servo motor Friction feed/Digital control servo motor Maximum cutting area 29 x 984-1/8″(737 x 24,998mm) 39 x 984-1/8″(1000 x 24,998mm) 47 x 984-1/8″(1195 x 24,998mm) Width: 65″ (1651 mm) Acceptable media width 2 to 36″(50 to 915mm) 3-1/2 to 46″(90 to 1178mm) 3-1/2 to 54″(90 to 1372mm) 5-1/16″ to 72.5″ (130 mm to 1842 mm) Maximum cutting speed During cutting: 33ips (850mm/sec.) [in all directions]During tool-up: 47 ips (1202mm/sec) [in 45º direction] During cutting: 33.5″/sec (850 mm/sec) (in all directions)During tool-up: 47″/sec (1202 mm/sec) Cutting force 20 to 350 gf 1 to 85 cm/sec (in increments of 1 cm/sec), 20 to 350 grams force (increments of 10 grams) > Mechanical resolution 0.00049″/step (0.0125mm/step) 0.000137″/step (0.0035 mm/step) Software resolution 0.00098″/step (0.025mm/step) 0.000984″/step (0.025 mm/step) Distance accuracy Error of less than ± 0.2% of distance traveled, or 0.00039 (0.1mm), whichever is greater Error of less than 0.2% of distance traveled, or 0.00394″ (0.1 mm), which is greater Repetition accuracy 0.1mm or less (excluding stretching/contraction of the material)Range for assured repetition accuracyFor materials with a width exceeding 24″ (610mm): Length 157-7/16″ (4000mm) (GX-400/500 only)For materials with a width of 24″ (610mm) or less: Length 314-15/16″ (8000mm) 0.004″ (0.1 mm) or less Interface Serial (RS-232C compatible), USB (Rev. 1.1) Serial (RS-232C-compatible), USB (Rev 1.1) Buffer size 8MB (2MB for re-plot buffer) 2 MB (buffer size: 8 MB) Power supply AC 100V to 240V +/- 10% 50/60Hz 1.2A AC 100V to 240V =/- 10% 50/60Hz 1.1A AC 100V to 240V ±10% 50/60Hz 1.2A Power consumption Approx. 95W Approx. 100WApprox. 100W Acoustic noise level Cutting mode: under 62 dB (A) Standby Mode: under 40 dB (A) (According to ISO 7779) Dimensions with stand 45-1/16(W) x 28-5/8(D) x 43-13/16″(H)1144(W) x 727(D) x 1113mm (H) 55-3/8(W) x 28-5/8(D) x 43-13/16″(H)1407(W) x 727(D) x 1113mm(H) 63-1/16(W) x 28-5/8(D) x 43-13/16(H)1602(W) x 727(D) x 1113mm (H) 83-1/4 (W) x 28-5/8 (D) x 43-13/16 (H) in (2155 (W) x 727 (D) x 1113 (H) mm) Weight with stand 97lb. (44 kg) 112.4lb. (51 kg) 121.2 lb. (55 kg) 141.1 lb (64 kg) Operating temperature 41 to 104F (5 to 40C) Operating humidity 35 to 80% (non-condensing) Standard accessories Power cord, blade, blade holder, alignment tool, cable clamp, replacement blade for separating knife, Roland Software Package CD-ROM (CutStudio design software, plug-ins for CorelDraw 10/11/12 and Adobe Illustrator 9/10/CS), startup guide, user manual Power cord, blade holder (XD-CH2), pin, blade, blade (ZEC-U5022), alignment tool, cable clamp, replacement blade for sheet cutter, USB cable, Roland software CD-ROM, setup guide, user’s manual

Specifications : Brand Name R3D Color Black Compatible Material Metal , Acrylonitrile Butadiene Styrene , Polyethylene Terephthalate Glycol , Polylactic Acid , Polyvinyl Alcohol , Copper Ean 0610452339278 Number of Items 1 Part Number MINI-001 Power Consumption 350.0 watts Size 32.5*30.3*42.8CM Specification Met UNSPSC Code 40000000 UPC 610452339278 Wattage 120.00 watts R3D Printer Parameters Machine Color/Body Material Black/ Pressed Steel Machine Size/Build Size Volume 325*303*428mm / 150*150*220mm Printing Speed 20-150 mm/s Machine/Printing Precision Z-axis 0.0025mm, XY-axis 0.011mm /Printing: 0.1-0.2mm (depending on printing speed and detailing 3d model) Layer Thickness 0.05-0.3mm (adjustable by software) Support Filament PLA/ABS/PETG/PVA 1.75mm filament Input Rated Voltage/Power 120V/60Hz or 230V/50Hz ,120W Nozzle Size 0.4mm Extruder Velocity 30 cc/h Extruder Temperature 180-260℃ Heated Bed Temperature 50-120℃ 3D Files Format Support STL,OBJ,Gcode Workstation Compatibility Windows /Linux/MAC OS Connection SD card or USB connection Packing Size 430*410*535mm G.W./N.W.: 17kg/11kg

Product Description Product Name Rotary Heat Press Printing Area 23 cm x 30 cm (9 ″ x 12 ″) Power 600 W Max Temperature 250 ° C Package Size 43 * 39 * 34.7 cm Weight 15 kg Voltage 110 V / 220 V Model HP230B Packing and delivery Sales unit: single piece. Size of one package: 43X39X35 cm.Gross weight of one package: 15000 kg.

Mutoh ValueJet VJ-1638 / VJ-1638W / VJ-2638 Printhead-DG-43345To be used with: Mutoh Valuejet 1638 / Valuejet 1638W / Valuejet 2638Remarks: Original

Mutoh ValueJet 1628TD/2628TD Printhead-DG-42771 To be used with: Mutoh Valuejet 1628TD / Valuejet 2628TD Remarks: Original

The # 1 company in Kyrgyzstan providing fogging systems. We have the best outdoor cooling technology! Thanks to the uniqueness of the systems and high optimization, we have already implemented more than 110 large-scale projects in Kyrgyzstan. Due to the certified quality of fogging systems Tuman.kg, customers receive a 6-year warranty for the installed equipment (3 years of equipment warranty and 3 years of free service). The main direction of the company is the cooling of summer terraces, cafes, restaurants, gazebos, production facilities, etc. Artificial fogging systems are the surest and most advanced way to combat unwanted odors, dust and sultry heat in open spaces. Fogging technologies allow you to control the air temperature, create an atmosphere of the desired coolness, as well as completely cut off dust and allergens contained in it. The company has been providing services since 2012. Over the years, the systems have proven their functionality, and the company's employees have proven their professionalism. Our clients: Teahouse "Vostochka" Cafe "Koreana Family" Uncle Tom's Cabin Cafe Restaurant "Furusato" Restaurant "Navigator" Chaikhana "Bukhara" Coffee shop "Vannilla sky" Continental Restaurant Time out restaurant Confectionery "Our mark" Cafe "Red Fox" Cafe "Diyar" Restaurant "Arzu style" Cafe "Kaganat" Restaurant "Arzu" (Lebedinovka) Restaurant "Talisman" Restaurant "Ulu Too" Cafe "Rublevka" (Kordai) Teahouse "Omar Khayam" BC "Beren Gold" Restaurant "Villa V Club" Hotel "Jannat" Restaurant "Skullcap" Barbecue "Caucasian yard" Cafe "Aist" Cafe "Veranda" Cafe "Shafran" Wine restaurant "Vinoteka" Oculus Cocktail Bar Teahouse "Teahouse No. 1" Beauty salon "Success" Cafe "Jasmine" Cafe "Arabeska" Cafe "Santa" Gastropub "Street Myasnaya" Cafe "Kleo" Coffee shop "Gloria" Cafe "Fakir" Cafe "Joma" "Barbecue No. 1" Bazaar "Ak Emir" Cafe "Odnoklassniki" Cafe "Ozhak Kebab" Cafe "Di 2" Coffee house "Bagel" "Golf Club" Bar "Pinta Pub" Coffee house "Panda" Restaurant "Bravo" Cafe "Merci Baku" "Barclays Pub" Hotel "Ambassador" Cafe "Aura" Restaurant "Veslo" Cafe "Khoja Nasreddin" Cafe "Saksaul" Restaurant "Prego" "Live Bar" BC "Ordo" Cafe "Ugolyok" Teahouse "Aladdin's Lamp" "Neo Med" Cafe "Ormon Khan" Farms Mycelium Greenhouses Disinfection Disinfection tunnel

We specialize in exporting brand new Engraving Machines, CNC machine, milling machine and laser machine to any country of the world. We supply best of quality Engraving Machines, CNC machine, milling machine and laser machine including major models from best brand makers. Currently we offer best products and brands from: roland, SISMA and many mores! Please visit our site or contact us for check our product available. World Wide Shipment Service Available!

Zulfahmi Lubis Electronic is one of the leading developers, distributors, manufacturers of scanners, printing machine, inkjet printer and laser printer technology for photo printers. The consistent quality of our products is based on advanced American technology and excellent Asian R & D teams. We currently offer the best products and brands from: MUTOH PRINTER, MIMAKI, ROLAND PRINTER, EPSON, HP PRINTER, DTG and FAST T JET, and many other customs!

Zulfahmi Lubis Electronic is one of the leading developers, distributors, manufacturers of scanners, printing machine, inkjet printer and laser printer technology for photo printers. The consistent quality of our products is based on advanced American technology and excellent Asian R & D teams. We currently offer the best products and brands from: MUTOH PRINTER, MIMAKI, ROLAND PRINTER, EPSON, HP PRINTER, DTG and FAST T JET, and many other customs!

Surface Preparation and Application Method: Dirty or loose textures on the first surfaces to be applied, also on old painted surfaces. Swelled or dusty parts should be cleaned and primed with Silicone Primer. Liner 3 - 4 hours after the application depending on the air temperature between the coats. It is recommended to apply 2 coats. Thinning / Mixing Ratio: It is diluted 10-15% by volume with water. Paintable (Coatable) Area 13 - 15 m²/L on one floor. Drying Time: It completes its drying in 1 - 3 hours at 20°C, and its hard drying in 24 hours. Recommended Application Apparatus: Facade roller and brush.

& nbsp; Building straight-walled grain storage hangars & nbsp; capacity & nbsp; 9 & nbsp; 000 tons of grain & nbsp; & laquo; turnkey '. Price: Hangar dimensions (width x length) - & nbsp; 24 x 120 & nbsp; m; Retaining wall inside & ndash; 2.4 m high concrete; Roofing sheet - & nbsp; wave height 44 mm, thickness 0.5 mm; Professional sheet on the walls & ndash; wave height 20 mm, thickness 0.45 mm; Gate & ndash; 4 x 4 m at the ends of buildings or at the side of the hangar; Louvered grilles for ventilation of grain. SarAgroMontazh Company trust construction because .., <! - [if! supportLists] -> 1) & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; <! - [endif] -> We have been building grain storage hangars for 5 years already. We understand how thick the metal should be, what kind of profiled sheet is needed to make the hangar happy & nbsp; years. <! - [if! supportLists] -> 2) & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; <! - [endif] -> If after the conclusion of the contract your plans change & ndash; we are & nbsp; ready to go to a meeting and make changes to the agreement. <! - [if! supportLists] -> 3) & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; <! - [endif] -> We buy metal and profiled sheet from trusted suppliers, there will be the declared thickness of the metal & ndash; & nbsp; you can check it yourself. Certificates and micrometer & nbsp; will provide. Call, & nbsp; will provide a calculation and & nbsp; contacts of farmers, peasant farms and agricultural cooperatives who have already built hangars! & nbsp; & nbsp;

We build arched frame hangars for production. & nbsp; In construction, we will take into account the peculiarities of your business, the need for a crane, room temperature, fire safety. Hangar specifications: Length x Width x Height & ndash; 30 m x 15 m x 7.5 m, Foundation & ndash; bored piles, Concrete grillage & ndash; 1 meter high, Arches & ndash; profile tube 60 x 40 mm, Lathing & ndash; timber 50 x 100 mm, Coverage & ndash; professional sheet С 8 (thickness 0,4 & hellip; 0,45 mm) Insulation & ndash; mineral wool 100 mm thick. Gate & ndash; sectional end 4 x 4 m. Floor device & ndash; concrete with a hardened top layer (topping). & nbsp; Why choose SarAgroMontazh for building? - Ready & nbsp; do the job on a turnkey basis from the project to the installation of the floor in the hangar. At the end of construction & nbsp; take over the hangar and bring in equipment. - Construction period & ndash; 30 -45 days. Steel structures are manufactured in the workshop, and assembly and installation takes place at the construction site. Due to this, we reduce the construction time. - Purchase metal, profiled sheet & nbsp; & nbsp; from trusted suppliers, the metal will be of the required thickness & ndash ; & nbsp; you can check it yourself & nbsp; . Certificates and micrometer & nbsp; will provide . Call, we will provide & nbsp; calculations and contacts of customers who built it.

We build turnkey arched hangars for storing grain & nbsp; 810 & ndash; 1881 sq. m. Hangar characteristics: Width (options): 15.19 meters; Length (options): 54,57,60,63,66,69,72,75,78,81,84,87,90,93,96,99 meters; Working height: 7, 9 m; Foundation & ndash; bored piles every 3 meters; Arches & ndash; profile tube 60 x 40 mm; Lathing & ndash; timber 50 x 100 mm; Roofs and walls & ndash; professional sheet С 8 (thickness 0,4 & hellip; 0,45 mm); Gate & ndash; end 4 x 4 m. Advantages of ordering construction in the company "SarAgroMontazh": <! - [if! supportLists] -> 1) & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; <! - [endif] -> Construction period & ndash; 45 days. Steel structures are manufactured in the workshop, and assembly and installation takes place at the construction site. Due to this, we reduce the construction time. <! - [if! supportLists] -> 2) & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; <! - [endif] -> The hangar will stand for many years. During construction, we will take into account the wind and snow load of the construction site, we will suggest how to make the hangar capacity larger. <! - [if! supportLists] -> 3) & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; <! - [endif] -> Turnkey construction. & nbsp; We will prepare working documentation, purchase metal, manufacture and assemble metal structures, find the equipment necessary for construction. You only need to add grain. We act for the development of agriculture! Call us, we will provide calculations and feedback on the work.

COUPLING CONSISTS OF COUPLING AND O-RING, WHICH PROVIDES A LEAK TIGHTNESS AND RELIABILITY OF THE CONNECTION. COUPLING FLANGES ALLOW EASY TO CONNECT RUBBER PIPES TO METAL PIPES. THE BOARD FLANGE IS THE STRUCTURE OF A RUBBERED METAL FLANGE ELEMENT THAT IS ONE WHOLE WITH THE PIPE. THE METAL ROTARY FLANGE IS A PIPELINE INDEPENDENT ELEMENT THAT SERVES EASY FOR INSTALLATION AND DISMANTLING. ADAPTER FLANGE IS USED WHERE IT IS NECESSARY TO CONNECT RUBBER PIPING TO OTHER TYPES OF PIPING OR EQUIPMENT WITH DIFFERENT CONNECTING SIZES. THE MOUNTING FLANGE IS USED FOR INSTALLATION OF PIPELINES AND ALLOWS TO FIX RUBBER PIPES TO SURROUNDING METAL STRUCTURES. & nbsp;

FLOATING PIPELINES ARE RECOMMENDED FOR USE IN TAILINGS OF MINING PLANTS. & nbsp; They are used for transporting abrasive slurry over the water surface from the dredger to the shore. Taking into account the peculiarities of modern technology, pipelines can be equipped with floats for operation as part of both diesel and electric dredgers with the possibility of laying a power cable. & nbsp;

THE CLAMP (HOSE CUFF) IS INTENDED TO REGULATE THE FLOW OF THE WORKING MEDIUM WITH VARIOUS KINDS OF VALVES. The pinch valve branch pipe serves to seal off the working medium when exposed to pressure from the outside. Made in the form of an elastic cylindrical pipe. Made from rubber based on natural or synthetic rubber. The design of the pinch tube provides high flow capacity and long service life.

The expansion joint is usually installed directly in front of or after the pump and is used to reduce vibrations in piping systems, which reduces the load on the system and avoids emergencies in places where the rubber slurry line is connected to the pump. The vibration damper consists of a wear-resistant inner part, in the production of which rubber based on synthetic or natural rubber is used, and a power frame made of cord fabric. Depending on the place of installation and connection dimensions, the design of the expansion joint assumes the use of embedded or rotating flanges. & nbsp;

MULTI-LENS COMPENSATOR HAS LARGER COMPLETION AND EXTENSION AMPLITUDE COMPARED TO LENSE COMPENSATOR, WHICH ALLOWS THE USE OF LESS PRODUCTS DATA ON LONG LONG PIPES. It is a flexible insert made of cord fabric. The inner part is made of rubber based on natural or synthetic rubber. The compensator ensures trouble-free operation in case of sudden temperature fluctuations. & nbsp;