All Heating equipment and supplies suppliers from Ukraine

Climate panels EFFI is a universal system for creating thermal comfort in rooms. In addition to highly efficient heating, ceiling climate panels can also be used for cooling. Climate panels can work all year round, in any season, creating the right comfort at the right time. An important advantage of climate panels is the ability to work with absolutely any heat source: gas or electric boiler, solid fuel system or heat pump, with heating mains. There is no dependence on the price of a particular energy carrier, there is the possibility of choosing the most profitable option. Climatic panels are especially effective in large and high rooms: production halls, warehouses, sports and concert venues, retail and exhibition rooms. Safe climate panels can be used in rooms with a high category of fire and explosion hazard, they are perfect for hospitals, kindergartens and schools.

Heat pumps MIDI - designed for heating, hot water and cooling residential and industrial facilities with an area of 300-1500 (cottages, swimming pools, office buildings, hotels, industrial premises, shopping centers). For homes, offices, industrial premises: 300 - 1500 m² Appointment: heating, hot water supply, passive conditioning, active conditioning Power models: 20-46 kW Price: 6 924 - 9 175 € Characteristics: 7 ”touch screen Multilingual control menu High heat carrier temperature 65 ° C Additional heat source control Flexible programmable timer Hot gas heat exchanger Integrated frequency converter Internal temperature sensor Simple installation and maintenance Ability to integrate into the Smart Home system Room cooling Weather-dependent temperature control of the heating system Automatic regulation of class A circulation pumps

Emitters do not heat the air. The generated thermal radiation fills the space under the emitters, heating directly people and objects. This avoids humidity fluctuations in the room, which are dangerous for living things and significantly reduces the risk of sudden temperature changes associated with drafts. Space heating with SUN BEAM gas emitters consists in transferring thermal energy to a specific space, which makes it possible to differentiate a constant temperature inside the same room or to allocate heated and unheated zones in it. Therefore, emitters are often used as one of their forms of heating production, as well as retail premises, warehouses and hangars. Infrared gas radiant heaters also pay off in industrial, sports facilities, industrial premises, etc. SBC Ceramic Gas Infrared Emitters An infrared ceramic gas emitter is a heating device with an open combustion chamber in which a gas-air mixture is burned on the surface of a ceramic tile. The air needed for combustion is taken from the room, and the exhaust from it is taken here, because the room in which the ceramic emitters are installed must be adequately ventilated. Tubular infrared gas emitters SBT Tubular infrared gas emitters are a modern device designed for heating industrial and commercial facilities, as well as warehouses, sports facilities, etc. Tubular radiators SBT can significantly reduce the cost of heating facilities. Tubular emitters allow you to get heat instantly. The outer surface of the pipe is heated to a temperature of + 360 ° C and emits heat using infrared rays, which, thanks to the installed reflector, are sent to the bottom of the room. Thus, we use 100% of the heat that is felt in the lower and therefore used areas of the building. The entire line on the site:

The AIR series of air heat pumps is the optimal solution for areas where there is no possibility to drill wells or it is economically disadvantageous. For houses: 150 - 500 m² Purpose: heating, hot water supply, passive conditioning Power models: 12-45 kW Price: 5 451 - 14 367 € This series of heat pumps is the optimal solution for areas where there is no possibility to drill wells or it is economically unprofitable. The design of the pump consists of two blocks: external and internal. Combining an air heat pump gives you greater freedom and flexibility when designing your ideal heating system. Features of AIK AIR heat pumps: Heat carrier heating up to 55 ° С Weather dependent control High COP value up to 5 High level of equipment protection AIK AIR equipment: Panasonic EVI compressors with steam injection to increase productivity by 5-7% and protect the compressor from overheating Air conditioning module Online-control In more detail:

Monocrystal is the only manufacturer of electric infrared film heating elements and systems Underfloor heating and electric heating products in Ukraine and Europe On the market for over 10 years. We offer efficient, optimal, energy-saving solutions for electric heating and heating. A unique, innovative proposal for the main or additional heating of any premises. The most effective application in the heating system Underfloor heating. Average daily consumption with thermostat 50W/sq.m. Energy-saving, economical heating compared to other heat carriers up to 30%. It is mounted under any coverings and on any surfaces. We have been producing products for over 10 years. Quality assurance 10 years. The quality is confirmed by the operation and manufacturer's documents. The service life is more than 50 years. Supply voltage 220 volts. Film width 60, 34, 30, 26, 20, 12 and 10 cm. Thickness 0.3mm. Cut line from 10 to 35 cm. depending on modification Power 1 sq.m. from 130 to 600 watts. depending on modification. Under the order we will make a film with your size and power. The best price / quality offer on the market. Consulting, technical support. Flexible terms of payment and shipment. Supplied in rolls of any length, as well as in service packaging. There is a barcode on the package. We offer partnership Importers and companies in the heat market, manufacturers of heat equipment, builders, dealers, wholesalers, online stores, retail stores and individual entrepreneurs at prices from 30% below retail prices. Delivery with payment upon sale.

Three-plunger crank units and pumps ПТ and Т are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 to plus 200 ° С). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Pumps and units are used in industries requiring high pressures, including explosion and fire hazardous ones (for example, hydraulic cleaning of technological equipment). It is also used as feed pumps for mobile steam generating units. The three-plunger crank unit consists of an electric motor and a pump mounted on a common frame. The pumps can be driven by an electric motor, combustion engine or diesel engine. The connection between the pump and the electric motor can be carried out through a V-belt transmission, through a gearbox or directly through a clutch. The three-plunger pump consists of a drive and hydraulic parts. The drive end contains a crankshaft for converting the rotational motion of the engine into the reciprocating motion of the plungers. The hydraulic part consists of a valve body, plungers, stuffing box seals, suction and discharge valves, a safety valve. The safety valve is adjusted to the nominal working pressure, and if necessary, the valve can be adjusted to a different pressure. The units can be connected to devices that regulate the engine speed. Three-plunger crank units and pumps ПТ and Т are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 to plus 200 ° С). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Pumps and units are used in industries requiring high pressures, including explosion and fire hazardous ones (for example, hydraulic cleaning of technological equipment). It is also used as feed pumps for mobile steam generating units. Design The three-plunger crank unit consists of an electric motor and a pump mounted on a common frame. The pumps can be driven by an electric motor, combustion engine or diesel engine. The connection between the pump and the electric motor can be carried out through a V-belt transmission, through a gearbox or directly through a clutch. The three-plunger pump consists of a drive and hydraulic parts. The drive end contains a crankshaft for converting the rotational motion of the engine into the reciprocating motion of the plungers. The hydraulic part consists of a valve body, plungers, stuffing box seals, suction and discharge valves, a safety valve. The safety valve is adjusted to the nominal working pressure, and if necessary, the valve can be adjusted to a different pressure. The units can be connected to devices that regulate the engine speed. Delivery - 8 m3 / h Pump outlet pressure 16 MPa Weight-660kg European quality-Ukrainian price!  

Three-plunger crank pumps PT and T are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 up to plus 200 ° C). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Pumps and units are used in industries requiring high pressures, including explosion and fire hazardous ones (for example, hydraulic cleaning of technological equipment). It is also used as feed pumps for mobile steam generating units. The three-plunger pump consists of a drive and hydraulic parts. The drive end contains a crankshaft for converting the rotational motion of the engine into the reciprocating motion of the plungers. The hydraulic part consists of a valve body, plungers, stuffing box seals, suction and discharge valves, a safety valve. The safety valve is adjusted to the nominal working pressure, and if necessary, the valve can be adjusted to a different pressure. The units can be connected to devices that regulate the engine speed. Flow rate - 4.0-10 m3 / h Pump outlet pressure 10 MPa 1 year manufacturer's warranty! Order European quality at Ukrainian prices!  

Plunger metering pump units ND are intended for volumetric pressure metering of neutral and aggressive liquids, emulsions and suspensions with kinematic viscosity from 8.5 • 10-7 to 8.5 • 10-4 m2 / s (from 0.0085 to 8.5 cm2 / s), with a temperature from 258 to 473 K (from -15 to +200 ° C), with a solid non-abrasive phase concentration of not more than 10% by mass, with a maximum particle density of up to 2000 kg / m3, with a grain size of a solid non-abrasive phase no more than 1% of the nominal bore diameter of the inlet pipe. The area of application of the units (pumps) is determined by the resistance of the material from which the hydraulic part is made, as well as the resistance of the seal material. On the basis of metering pumps, the following installations are manufactured: one-component metering (UND) for metering supply to gas and oil field lines and objects of corrosion inhibitors, paraffin and scale deposits, demulsifiers and other products; multicomponent (up to 6 components at the same time) dosing (UMD) for simultaneous feeding into the technological line of a dosed amount of liquids or liquid mixtures, emulsions and suspensions with a temperature from 258 to 373 K (from -15 to +100 ° C). Multi-plunger units can provide the supply of liquids both separately by each cylinder and together in various combinations both at the inlet and outlet. Technical characteristics of the pump НД 25/400 К 14: Feed-25 l / hour; The pressure at the outlet of the pump is 400 kgf / cm2; Hydraulic part K - steel 12Х18 Н10 Т Order a Ukrainian pump ND from the KhNZ Trading House!

Plunger metering pumps ND are intended for volumetric pressure metering of neutral and aggressive liquids, emulsions and suspensions with a kinematic viscosity from 8.5 • 10-7 to 8.5 • 10-4 m2 / s (from 0.0085 to 8.5 cm2 / s), with a temperature from 258 to 473 K (from -15 to +200 ° C), with a concentration of a solid non-abrasive phase of not more than 10% by mass, with a maximum density of particles up to 2000 kg / m3, with a grain size of a solid non-abrasive phase not more than 1% of the nominal bore diameter of the inlet pipe. The area of application of the units (pumps) is determined by the resistance of the material from which the hydraulic part is made, as well as the resistance of the seal material. On the basis of metering pumps, the following installations are manufactured: one-component metering (UND) for metering supply to gas and oil field lines and objects of corrosion inhibitors, paraffin and scale deposits, demulsifiers and other products; multicomponent (up to 6 components at the same time) dosing (UMD) for simultaneous feeding into the technological line of a dosed amount of liquids or liquid mixtures, emulsions and suspensions with a temperature from 258 to 373 K (from -15 to +100 ° C). Multi-plunger units can provide the supply of liquids both separately by each cylinder and together in various combinations both at the inlet and outlet. Specifications: Feed-25 l / hour; Discharge pressure-250 kgf / cm2; Execution of the hydraulic part K - steel 12 X 18 H10T; Order time-tested quality!