All Construction Materials suppliers from Ukraine

Climate panels EFFI is a universal system for creating thermal comfort in rooms. In addition to highly efficient heating, ceiling climate panels can also be used for cooling. Climate panels can work all year round, in any season, creating the right comfort at the right time. An important advantage of climate panels is the ability to work with absolutely any heat source: gas or electric boiler, solid fuel system or heat pump, with heating mains. There is no dependence on the price of a particular energy carrier, there is the possibility of choosing the most profitable option. Climatic panels are especially effective in large and high rooms: production halls, warehouses, sports and concert venues, retail and exhibition rooms. Safe climate panels can be used in rooms with a high category of fire and explosion hazard, they are perfect for hospitals, kindergartens and schools.

Installation of devices at the stage of construction of new facilities and during repair work in finished buildings does not require special preparation and is very simple. To begin with, holes 230-240 mm in diameter are drilled in the wall with a slope of 1% to the external facade. Then, system enclosures are inserted into these holes, which are connected to the Twist controller, according to the attached diagram. Now fresh air without energy loss is already a reality!

Ventoxx Champion is a standard ventilation unit with a simple design and medium power ratings. The optimal combination of price and quality makes this model the absolute champion in the number of regular sales for many years. Ventoxx Champion is equipped with a German-made ceramic heat exchanger capable of providing heat recovery efficiency of up to 86%. These performance indicators of the recuperator are confirmed by testing results in an independent laboratory in Germany and are supported by relevant test reports. The Ventoxx Champion recuperator operates at temperatures ranging from -20 ° C to + 50 ° C and can withstand any weather conditions. In total, 11 programs and 3 work speeds are provided. The maximum volume of air that the recuperator is able to pump is 60 m³ / h. The peak power consumption of the device is 4.6 watts. The maximum noise level of the device is only 43 dB.

The Ventoxx Comfort recuperator is completed with: Plastic shell 300 mm - 1; External metal cover - 1; Internal cover - 1; Cartridge with thermal battery and fan - 1; Filter class G3 - 1; Office Twist - 1; Mounting the outer cover; Warranty Card; Instruction Ventoxx Comfort is designed for 17 operating modes and 5 speeds that regulate the different volume of ventilated air depending on the needs of the owner. The recuperator is controlled using the Ventoxx Twist device, which can be installed in the wall in any place convenient for the client. Intuitive controls can simultaneously control the operation of several recuperators (up to four). The relay allows you to select the mode and speed of operation, which are displayed using light diodes. The Ventoxx Comfort model is used both in the construction of new residential buildings and in the reconstruction of secondary housing. This ventilation device can be used in rooms for various purposes. Like the other recuperators in our range, Ventoxx Comfort has a sleek design that blends equally well with any style of interior.

Heat pumps MIDI - designed for heating, hot water and cooling residential and industrial facilities with an area of 300-1500 (cottages, swimming pools, office buildings, hotels, industrial premises, shopping centers). For homes, offices, industrial premises: 300 - 1500 m² Appointment: heating, hot water supply, passive conditioning, active conditioning Power models: 20-46 kW Price: 6 924 - 9 175 € Characteristics: 7 ”touch screen Multilingual control menu High heat carrier temperature 65 ° C Additional heat source control Flexible programmable timer Hot gas heat exchanger Integrated frequency converter Internal temperature sensor Simple installation and maintenance Ability to integrate into the Smart Home system Room cooling Weather-dependent temperature control of the heating system Automatic regulation of class A circulation pumps

Emitters do not heat the air. The generated thermal radiation fills the space under the emitters, heating directly people and objects. This avoids humidity fluctuations in the room, which are dangerous for living things and significantly reduces the risk of sudden temperature changes associated with drafts. Space heating with SUN BEAM gas emitters consists in transferring thermal energy to a specific space, which makes it possible to differentiate a constant temperature inside the same room or to allocate heated and unheated zones in it. Therefore, emitters are often used as one of their forms of heating production, as well as retail premises, warehouses and hangars. Infrared gas radiant heaters also pay off in industrial, sports facilities, industrial premises, etc. SBC Ceramic Gas Infrared Emitters An infrared ceramic gas emitter is a heating device with an open combustion chamber in which a gas-air mixture is burned on the surface of a ceramic tile. The air needed for combustion is taken from the room, and the exhaust from it is taken here, because the room in which the ceramic emitters are installed must be adequately ventilated. Tubular infrared gas emitters SBT Tubular infrared gas emitters are a modern device designed for heating industrial and commercial facilities, as well as warehouses, sports facilities, etc. Tubular radiators SBT can significantly reduce the cost of heating facilities. Tubular emitters allow you to get heat instantly. The outer surface of the pipe is heated to a temperature of + 360 ° C and emits heat using infrared rays, which, thanks to the installed reflector, are sent to the bottom of the room. Thus, we use 100% of the heat that is felt in the lower and therefore used areas of the building. The entire line on the site:

The AIR series of air heat pumps is the optimal solution for areas where there is no possibility to drill wells or it is economically disadvantageous. For houses: 150 - 500 m² Purpose: heating, hot water supply, passive conditioning Power models: 12-45 kW Price: 5 451 - 14 367 € This series of heat pumps is the optimal solution for areas where there is no possibility to drill wells or it is economically unprofitable. The design of the pump consists of two blocks: external and internal. Combining an air heat pump gives you greater freedom and flexibility when designing your ideal heating system. Features of AIK AIR heat pumps: Heat carrier heating up to 55 ° С Weather dependent control High COP value up to 5 High level of equipment protection AIK AIR equipment: Panasonic EVI compressors with steam injection to increase productivity by 5-7% and protect the compressor from overheating Air conditioning module Online-control In more detail:

Decorative gypsum brick “Marble (Chipped)” is a classic solution modern interior. The soft, warm tones of the bricks effectively transform the walls, pleasing the eye. Decorative gypsum brick “Marble (Chipped)”, which can be bought in Kharkov, effectively decorates both the entire wall and individual parts of the room. Such walls perfectly fit into the interior of offices, photo studios, beauty salons, art galleries, etc. For the manufacture of these decorative bricks, G-10 brand gypsum is used. They can be easily mounted on the wall and are unpretentious to use. Decorative brick is a good noise insulator and does not support combustion. CHARACTERISTIC: Material: high-strength gypsum of the G-10 brand! (compressive strength 10 MPa (100 kgf / cm2)); Tile length: 210 mm; Tile height: 55mm; Tile thickness: 0.5-1.3 mm;

Parquet board, a beautiful and high-quality ball for your home or apartment.   Coating: varnish, oil (optional) Material: European oak Thickness: 16mm. Substrate: FSF 12mm. Dimensions: 325x975mm. Area: 0.31 m2 / 1unit

Plaster decorative brick "Classic" is a classic solution for a modern interior. The soft, warm tones of the bricks effectively transform the walls, pleasing the eye. Classic gypsum decorative bricks effectively decorate both the entire wall and individual parts of the room. Such walls perfectly fit into the interior of offices, photo studios, beauty salons, art galleries, etc. For the manufacture of these decorative bricks, G-10 brand gypsum is used. They can be easily mounted on the wall and are unpretentious to use. Decorative bricks are good noise insulators and do not support combustion. CHARACTERISTICS: Material: high-strength gypsum of the G-10 brand! (compressive strength 10 MPa (100 kgf / cm2)); Tile length: 235 mm; Tile height: 60 mm; Tile thickness: 8-12 mm; The package contains 60 pcs. The area covered by the package is 91.5 cm by 94 cm. The price is indicated for packing - 0.84 sq.m. excluding the seam.

Decorative gypsum tiles "Paris" with a seam will become a highlight in the interior of any residential or office space. Tiles "Paris" are bricks with bevelling, this facilitates the installation of tiles on the wall. Such an unusual 3D texture of decorative tiles is perfectly combined with glossy and matte monochromatic finishes, surfaces of modern interiors. Decorative tiles with a seam are made of environmentally friendly G-10 brand gypsum. Freely assembled on the wall, unpretentious to use. The tiles have good noise insulation and prevent fires. Characteristics: Color: White (unpainted). Tile size, cm: 22 x 7 x 2 Material: Knauf gypsum (G-10) Type of use: For interior work. The price is indicated per sq.m. excluding delivery.

Gypsum decorative 3D panel "Wave" is a wonderful solution for creating a cozy recreation area. 3D panel "Wave" fits perfectly into the style of modern interiors, makes them sophisticated and creates a feeling of comfort. Decorative 3D panel "Wave" acts as an accent element in the design, as well as effectively highlight the ultra-fashionable designer furniture or original author's decor. For these decorative panels, G-10 grade molding plaster is used. They are easy to assemble on the wall, to use. Gypsum 3D panels "Wave" have good noise insulation and do not support combustion. Main characteristics Material Gypsum Shape Square Physical characteristics Weight, kg. ' 5 Height, mm. 500 Width, mm. 500 Additional characteristics Features 'Material: molding plaster of class g-10 Country of origin Ukraine Purchase conditions Availability In stock Delivery time' In stock By purchasing 3d panels from us you get 100% high quality product at the lowest price in Kharkov and Ukraine. We have the largest selection of panels, both in stock and on order. Why is it worth ordering 3D panels from us: -Own production. - Gypsum from Knauf g-10 without any additives. - Polyurethane molds with perfect geometry (no plastic). - Professional drying. - Safe packaging. From our company you get the best price from the manufacturer. PAY SPECIAL ATTENTION!!! Beware of very cheap imitation 3d panels, most artisanal manufacturers work with the cheapest raw materials, using crooked plastic molds, sell wet, crooked products without packaging !!! Installation of such panels is very difficult and sometimes not possible at all. The price is for one panel with a size of 50 cm by 50 cm.

Gypsum decorative 3D panel "Bricks" is a trendy alternative to facing bricks. Small elements of the 3D panel "Bricks" are organically connected to each other and resemble brickwork. Decorative 3D panel "Bricks" effectively highlights the kitchen area, the sitting area by the TV or fireplace, sleeping area and places on the loggias. For these decorative panels, molding plaster of the G-10 brand. They are easily assembled on the wall, unpretentious to use. Decorative panels "Bricks" have good noise insulation and prevent fires. Main characteristics Material Gypsum Shape Square Physical characteristics Weight, kg. ' 5 Height, mm. 500 Width, mm. 500 Additional characteristics Features 'Material: molding gypsum class g-10 Country of origin Ukraine Purchase conditions Availability Custom program Delivery time' 3-14 days from 20 sq.m. The price is for one panel measuring 51 cm by 45 cm.

Monocrystal is the only manufacturer of electric infrared film heating elements and systems Underfloor heating and electric heating products in Ukraine and Europe On the market for over 10 years. We offer efficient, optimal, energy-saving solutions for electric heating and heating. A unique, innovative proposal for the main or additional heating of any premises. The most effective application in the heating system Underfloor heating. Average daily consumption with thermostat 50W/sq.m. Energy-saving, economical heating compared to other heat carriers up to 30%. It is mounted under any coverings and on any surfaces. We have been producing products for over 10 years. Quality assurance 10 years. The quality is confirmed by the operation and manufacturer's documents. The service life is more than 50 years. Supply voltage 220 volts. Film width 60, 34, 30, 26, 20, 12 and 10 cm. Thickness 0.3mm. Cut line from 10 to 35 cm. depending on modification Power 1 sq.m. from 130 to 600 watts. depending on modification. Under the order we will make a film with your size and power. The best price / quality offer on the market. Consulting, technical support. Flexible terms of payment and shipment. Supplied in rolls of any length, as well as in service packaging. There is a barcode on the package. We offer partnership Importers and companies in the heat market, manufacturers of heat equipment, builders, dealers, wholesalers, online stores, retail stores and individual entrepreneurs at prices from 30% below retail prices. Delivery with payment upon sale.

Three-plunger crank units and pumps ПТ and Т are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 to plus 200 ° С). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Pumps and units are used in industries requiring high pressures, including explosion and fire hazardous ones (for example, hydraulic cleaning of technological equipment). It is also used as feed pumps for mobile steam generating units. The three-plunger crank unit consists of an electric motor and a pump mounted on a common frame. The pumps can be driven by an electric motor, combustion engine or diesel engine. The connection between the pump and the electric motor can be carried out through a V-belt transmission, through a gearbox or directly through a clutch. The three-plunger pump consists of a drive and hydraulic parts. The drive end contains a crankshaft for converting the rotational motion of the engine into the reciprocating motion of the plungers. The hydraulic part consists of a valve body, plungers, stuffing box seals, suction and discharge valves, a safety valve. The safety valve is adjusted to the nominal working pressure, and if necessary, the valve can be adjusted to a different pressure. The units can be connected to devices that regulate the engine speed. Three-plunger crank units and pumps ПТ and Т are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 to plus 200 ° С). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Pumps and units are used in industries requiring high pressures, including explosion and fire hazardous ones (for example, hydraulic cleaning of technological equipment). It is also used as feed pumps for mobile steam generating units. Design The three-plunger crank unit consists of an electric motor and a pump mounted on a common frame. The pumps can be driven by an electric motor, combustion engine or diesel engine. The connection between the pump and the electric motor can be carried out through a V-belt transmission, through a gearbox or directly through a clutch. The three-plunger pump consists of a drive and hydraulic parts. The drive end contains a crankshaft for converting the rotational motion of the engine into the reciprocating motion of the plungers. The hydraulic part consists of a valve body, plungers, stuffing box seals, suction and discharge valves, a safety valve. The safety valve is adjusted to the nominal working pressure, and if necessary, the valve can be adjusted to a different pressure. The units can be connected to devices that regulate the engine speed. Delivery - 8 m3 / h Pump outlet pressure 16 MPa Weight-660kg European quality-Ukrainian price!  

Three-plunger crank pumps PT and T are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 up to plus 200 ° C). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Pumps and units are used in industries requiring high pressures, including explosion and fire hazardous ones (for example, hydraulic cleaning of technological equipment). It is also used as feed pumps for mobile steam generating units. The three-plunger pump consists of a drive and hydraulic parts. The drive end contains a crankshaft for converting the rotational motion of the engine into the reciprocating motion of the plungers. The hydraulic part consists of a valve body, plungers, stuffing box seals, suction and discharge valves, a safety valve. The safety valve is adjusted to the nominal working pressure, and if necessary, the valve can be adjusted to a different pressure. The units can be connected to devices that regulate the engine speed. Flow rate - 4.0-10 m3 / h Pump outlet pressure 10 MPa 1 year manufacturer's warranty! Order European quality at Ukrainian prices!  

Plunger metering pump units ND are intended for volumetric pressure metering of neutral and aggressive liquids, emulsions and suspensions with kinematic viscosity from 8.5 • 10-7 to 8.5 • 10-4 m2 / s (from 0.0085 to 8.5 cm2 / s), with a temperature from 258 to 473 K (from -15 to +200 ° C), with a solid non-abrasive phase concentration of not more than 10% by mass, with a maximum particle density of up to 2000 kg / m3, with a grain size of a solid non-abrasive phase no more than 1% of the nominal bore diameter of the inlet pipe. The area of application of the units (pumps) is determined by the resistance of the material from which the hydraulic part is made, as well as the resistance of the seal material. On the basis of metering pumps, the following installations are manufactured: one-component metering (UND) for metering supply to gas and oil field lines and objects of corrosion inhibitors, paraffin and scale deposits, demulsifiers and other products; multicomponent (up to 6 components at the same time) dosing (UMD) for simultaneous feeding into the technological line of a dosed amount of liquids or liquid mixtures, emulsions and suspensions with a temperature from 258 to 373 K (from -15 to +100 ° C). Multi-plunger units can provide the supply of liquids both separately by each cylinder and together in various combinations both at the inlet and outlet. Technical characteristics of the pump НД 25/400 К 14: Feed-25 l / hour; The pressure at the outlet of the pump is 400 kgf / cm2; Hydraulic part K - steel 12Х18 Н10 Т Order a Ukrainian pump ND from the KhNZ Trading House!

Plunger metering pumps ND are intended for volumetric pressure metering of neutral and aggressive liquids, emulsions and suspensions with a kinematic viscosity from 8.5 • 10-7 to 8.5 • 10-4 m2 / s (from 0.0085 to 8.5 cm2 / s), with a temperature from 258 to 473 K (from -15 to +200 ° C), with a concentration of a solid non-abrasive phase of not more than 10% by mass, with a maximum density of particles up to 2000 kg / m3, with a grain size of a solid non-abrasive phase not more than 1% of the nominal bore diameter of the inlet pipe. The area of application of the units (pumps) is determined by the resistance of the material from which the hydraulic part is made, as well as the resistance of the seal material. On the basis of metering pumps, the following installations are manufactured: one-component metering (UND) for metering supply to gas and oil field lines and objects of corrosion inhibitors, paraffin and scale deposits, demulsifiers and other products; multicomponent (up to 6 components at the same time) dosing (UMD) for simultaneous feeding into the technological line of a dosed amount of liquids or liquid mixtures, emulsions and suspensions with a temperature from 258 to 373 K (from -15 to +100 ° C). Multi-plunger units can provide the supply of liquids both separately by each cylinder and together in various combinations both at the inlet and outlet. Specifications: Feed-25 l / hour; Discharge pressure-250 kgf / cm2; Execution of the hydraulic part K - steel 12 X 18 H10T; Order time-tested quality!

The synthetic winterizer is a lightweight, voluminous, elastic non-woven synthetic material with good heat-shielding, operational properties and an optimal ratio of price and quality. Sintepon is a classic material used in the furniture industry as a soft layer between the upholstery fabric and the main forming element. With it, the furniture acquires a beautiful appearance, magnificent forms and maximum comfort. The synthetic winterizer is actively used in light industry for tailoring outerwear, tracksuits and overalls; sleeping bags and other camping equipment; quilted mattresses, blankets, bedspreads and pillows. It is also used in shoe production, in construction as a heater and in everyday life as a filter material. GREENSTEP / offers you a three-dimensional non-woven fabric - synthetic winterizer in the range: thermally bonded and thermally bonded silicone. The synthetic winterizer manufactured by GREENSTEP / has many advantages: 1. The synthetic winterizer is manufactured on high-tech equipment of European quality, and strict quality control of products is carried out. 2. At the request of the customer non-woven material - synthetic winterizer can be thermally processed from one or two sides, ie calendaring, which gives an additional advantage - there is no fiber migration, no additional materials are required. In the end, this reduces costs and simplifies the manufacturing process of the product. the synthetic winterizer is made of polyester fiber according to: TU U 13.1-34390768-001: 2013. Conclusion of SES No. 05.03.02-04 / 22415. Certificate of Conformity No. UA1.007.0091367-13. synthetic winterizer has a clear control of surface density; the synthetic winterizer is not subject to knocking down (lump formation); synthetic winterizer is not subject to peeling (fiber migration); the synthetic winterizer holds heat, and are a heater; has splendor, lightness and softness; synthetic winterizer is very elastic and resilient; synthetic winterizer has the ability to restore shape. In the production process of thermally bonded and thermally bonded siliconized synthetic winterizer, we use only high-quality 100% hollow highly curved and hollow highly curved siliconized fibers of our own production, which is a guarantee of stable quality and constant availability of goods in stock. Fiber is used by Korean manufacturers to heat seal. High quality of raw materials is an additional guarantee of the quality of our final products. The density of the syntepon produced is from 40 to 4000 g / m2. Depending on the wishes of the customer. The width of the fabric is 1500 - 2500 mm. The synthetic winterizer is delivered in a free state, or in vacuum packing. At the request of the customer, production with non-standard parameters (density and width) is possible. Turning to our specialists, you can get any additional information that interests you about the sale of syntepon and clarify the terms of delivery. We are always open for offers on mutually beneficial cooperation.

Компания GREENSTEP - производитель штапельного вторичного полиэфирного волокна - предлагает своим покупателям следующие виды продукции: 1) твердое волокно (регулярноизвитое); 2) полое волокно (высокоизвитое силиконизированное, не силиконизированное) Линейная плотность (толщина) волокна: 7 Дтекс, 15 Дтекс. Длина резки волокна: 34мм/ 68мм; Цвет волокна: белый, коричневый, зеленый.