COMPOSITION MODEL ZGV-102 - 14371

Electric wood splitter Artmash 380 V is a rack and pinion model of an electromechanical splitter, adapted for connection to a three-phase network. Such a wood chopping machine is optimal for utilities and enterprises using solid fuel boilers. You will like the electric wood splitter Artmash 380 V, because it: completely safe to use. The manufacturer received a European СЄ certificate for a firewood preparation machine; stabs quickly, the split cycle is only 1.5 seconds. 20 cubic meters of firewood per shift is the usual norm for this unit; serves for a long time and without breakdowns. The design is well thought out, the parts subject to wear are made of stainless steel 18KhGT, are hardened and cemented. The splitting knife itself retains its properties throughout the life of the machine, the gear rack requires only periodic recovery. Thermal protection is installed on the motor; copes not only with birch logs, but also with knotty oak. All this thanks to a force of 12 tons and a friction clutch protecting the engine. To overcome a hard knot, it is enough just to make two hits; consumes a minimum of energy or fuel, since the impact force is provided not by the efforts of the motor, but by the inertia of the heavy flywheels; Suitable for splitting firewood with a diameter and length of up to 500 mm. At the same time, even when loading such heavy chocks, a good stability of the machine is ensured. The guaranteed service life of the electric wood splitter Artmash 380 V is 12 months. At the end of this period, you can always contact the manufacturer if you need to consult or replace consumables.

LLC Artmash is a manufacturer of lines for the production of pellets from waste wood processing industries for Ukraine and 20 other countries. At the request of the client, we can offer equipment of different capacities, we provide the most reliable information about the possibility of granulation of a particular raw material as well as possible performance. The standard line includes: Accurate loading auger 380V, 1.1 kW, 1500 rpm. Granulator 380V, 22 kW, 1500 rpm. Pellet cooler with vibrating table 380V, 5.5 kW, Before painting and selling all our equipment is tested for defects and their subsequent elimination. All nodes are made in-house with an inspection of quality control. Parts that are subjected to heavy loads are made of alloy steels with subsequent heat treatment. Contact us and we will help you choose the equipment of the necessary power and performance. Video with reviews of our customers The main advantages of our equipment: the matrix (die) is made of steel 20X with subsequent cementation in a thermal furnace. The hardness of the surface layer of the metal and the walls of the hole 62 HRC (bearing hardness) is achieved, which provides wear resistance for years of operation of the granulator; rollers are made in the same way as the matrix; the mechanism used involute helical gear transmission. Compared to spur gears, helical gear achieves a significantly lower noise level of the product as well as greater transmission durability; low power consumption. The matrix in diameter of 160 mm can work with 4 kW engines. 380 V and 4 kW, 220 V; in order to avoid engine overload, we have provided a thermal relay, which will timely turn off the engine in case of overheating; each granulator is tested for defects and repaired before painting and selling. Worm Gear Precision Auger Features Voltage: 380 V; Engine power: 1.1 kW, 1500 rpm; Productivity: up to 300 kg / h; Hopper volume: 0.6 cubic meters; Granulator weight: 140 kg; Dimensions: D2800 * W750 * H1600 mm. Characteristics of the pellet mill for pellets 380 V, 22 kW Voltage: 380 V; Engine power: 22 kW, 1500 rpm; Productivity: 400-800 kg / h; Granule diameter: 2-8 mm. The diameter of the matrix: 280 mm; Granulator weight: 400 kg; Dimensions: D1300 * W500 * H1300 mm. Pellet Cooler Characteristics Voltage: 380 V; Engine power: 4.5 kW, 3000 rpm; Productivity: up to 1000 kg / hour; Hopper loading volume: 1 cubic meter; Granule diameter: 2-6 mm. Diameter of the matrix: 160 mm; Granulator weight: 550 kg; Dimensions: D4000 * W1100 * H2500 mm.

Description: There are 2” or 3” kinds of PAD it’s useful for aperture smooth and grind. Long life, high speed. Light weight and trouble free. A durable yet economical choice offering longer life and higher speed to be suitable for process in vehicle body shop, mold and woodworking.   Specification: 1. Free Speed:15000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:600L/min 5. Net Weight:650g 6. Tool Length:160mm 7. Packing:20pcs/18kg/19kg/1.2'

The wood drying chamber model MGLD is designed for drying lumber in piles to a final moisture content of 8-12% with the possibility of front loading with a loader. The composition of the drying chamber includes: a body made of high-strength aluminum alloys, with an air circulation system installed in it (fans, diameter 800mm, each fan has 6 rotary aluminum blades), a supply and exhaust ventilation system (air dampers), a heating system (air heaters, thermal valves, pump, shut-off valve), humidification system (nozzles, pipes, irrigation, valves), air heating system, electrical cabinet, fully automated control system. Gates: lifting and sliding. Drying of wood in the chamber is carried out due to the reverse movement of heated air between the rows of pre-laid wood. Air is heated by radiators due to the circulation of superheated water in them. The MGLD model dries wood of any species, is reliable and economical in operation.

Brand New Product, PRODUCT OVERVIEW This is 20in. The Husqvarna 450 Rancher 2-stroke chainsaw is an outstanding all-round chainsaw for anyone who appreciates pro-level power and performance. X-Torq® 2.8 HP, 50.2 cc engine cm reduces fuel consumption and emissions. Meanwhile, the built-in fuel pump, Smart Start® technology and auto-return switch ensure smooth starting. 20 inches. The handlebar is equipped with an inertia-activated chain brake to reduce kickback and increase safety. The Smart Start® system with built-in fuel pump, automatic return switch and easy-to-pull start cord allows you to work quickly and with minimal effort. A simple side tension system allows for quick chain adjustments during operation. The LowVib® anti-vibration system helps reduce vibration, increasing user comfort and reducing user fatigue. 2 year limited warranty. FEATURES + BENEFITS Powerful 2.8 hp X-Torq® 2-stroke 50.2cc engine. reduces fuel consumption and gasoline emissions Rugged and manoeuvrable 20-inch. ideal for yard cleanup, firewood cutting, light felling work, etc. Smart Start® technology with built-in fuel pump, auto-reset switch and easy-to-pull starter cord ensures quick engine starts with minimal effort Inertia-activated chain brake, reduces kickback to reduce injury during operation Automatic oiler ensures constant supply of chain lubrication Simple side tension system allows quick adjustments during operation LowVib® anti-vibration system reduces vibration levels to help minimize operator fatigue Quick release air filter for easy cleaning and replacement Key Features Part Number No. 106858 Brand name Husqvarna Manufacturer's warranty 24 months parts / 24 months labor Ship weight 18.9 lbs Rod length 20 Displacement (cm3) 50.2 Power 2.8 Fuel capacity (oz) 15.22 Gas:oil Fuel ratio mixture 50:1 Chain brake Yes Regulus Powered Oil Pump Supply Primer Bulb Yes Low Vibration Handle Yes Toolless Chain Tensioning No Case Included No Dimensions L x W x H (in) 16 x 8.9 x 11.5 Product Weight 18.9

TYPE CTCS45T CTCS52T CTCS58T Engine 1-Cylinder,2-Stroke,Air-cooling Displacement 45CC 52CC 57.2CC Rated output power and relevant speed 1.7kw/7000rpm 2.2kw/7000rpm 2.6kw/7500rpm Idle speed 3000rpm 3000rpm 3000rpm High speed 11500rpm 11500rpm 11500rpm Fuel/Oil mixture ratio 25:1 25:1 25:1 Fuel tank capacity 550ml 550ml 550ml Oil tank capacity 260ml 260ml 260ml Bar size 16"/18"/20" 18"/20"/22" 20"/22"/24" Chain pitch 3/8"/0.325" 3/8"/0.325" 3/8"/0.325" Gauge 0.050"/0.058" 0.050"/0.058" 0.058" Color box Meas 480×260×290mm 530×260×280mm 595×270×315(110)mm G/N.W. 7/6kgs 8/7kgs 9/8kgs Qty./20'/40'/40'HQ 800/1600/1800pcs 780/1560/1760pcs 820/1640/1990pcs

The WOLLER BS-550 LICHT twin-shaft circular log saw machine is designed for longitudinal sawing of logs with a diameter of 120 to 550 mm into a carriage and unedged boards. The machine is used as a first row machine, high power production. The machine, like all BS series machines, is designed for sawing logs in one pass, into unedged sawn timber with good surface quality. At the request of the customer, the machine can be equipped with our near-station equipment. Technical characteristics: - log diameter: 0.12-0.55 m - log length: 2.5-6.5 m - saw diameter: 550-750 mm * - saw shaft diameter: 90 mm - number of saws (max): 8 pcs - saw shaft motors power: 2 x 55 kW ** feed logs: 3 kW - feed speed: 1-30 m / min - machine dimensions (L x W x H): 8.5 x 2.5 x 2.15 m - machine weight (approx): 4300 kg

Designed for precise cutting of workpieces along the length, release of material with perfectly flat end surfaces, as well as removal of defective areas of wood. Maximum board width: 300 mm Maximum board length: 6500 mm Cutting height: up to 100 mm Saw blade diameter: 350 mm Motor power: - sawing: 2.2 kW x 6 pcs-feed: 3 kW Feed rate: to be specified when ordering Overall dimensions of cross-cutting, m: 7 x 1.6 x 1.3 Weight: 1350 kg

Designed to produce cylindrical (round) parts, cuttings from square blanks of various types of wood, as well as synthetic materials. It is used for the production of: Furniture Products for household use Shafts for shovels, rakes, etc. Stakes, dowels for Sports equipment Diameter of the resulting product, mm: 10 - 60 Material feed rate, m / min: 6; nine; 12 The smallest workpiece length, mm: 350 Number of cutter head knives, pcs: 2 Shaft rotation frequency, rpm: 4000 Number of electric motors, pcs: 2 Material feed motor power, kW: 0.75 Cutter head motor power, kW: 3 Dimensions , mm (length * width * height) 850х500х995 Weight: 270kg.

Designed for precise cutting of workpieces along the length, release of material with perfectly flat end surfaces, as well as removal of defective areas of wood. Workpiece length: 500-1300 mm Workpiece width: up to 260 mm Workpiece thickness: 15-60 mm Saw blade size: 350х30 Number of circular saws: 2 pieces Saw drive power: 2.2 kW x 2 Feed power: 1.1 kW Feed speed : 5 m / min Machine dimensions (L x W x H), mm: 2000х1500х1100 Machine weight, kg: 300 ± 5

Designed for longitudinal sawing of logs in order to obtain carriages and unedged boards. Raw materials are fed into the saw unit using a caterpillar transport system. The log is fixed using automatic pneumatic clamps. WOLLER BS-550 LINIE ensures reliable operation even with 24/7 loading. Its design meets all modern safety requirements. Ease of setting the distance between the saws, ensures that the lumber of the desired size is quickly obtained. The machine has a colossal productivity of 300 - 400 m³ of round timber per shift. At the request of the customer, the machine can be completed with our near-station equipment. The maximum diameter of the log, mm: 120-550 Average max. diameter of a log taking into account curvature, mm: 300-500 Minimum length of a log, mm: 2500 Number of installed saws: 6 Diameter of saws, mm: 550/650/750 (Optional) Diameters of saw shafts, mm: 90 Number of revolutions of saw shafts, rpm : 3800 Power of saw shaft motors, kW: 55, 75, 90, 110 (on request) Feed speed, m / min: 1-30 Power of feed motors, kW: 17 Machine dimensions LxWxH, mm: 14700x2400x4050Weight, kg: 16700

The WOLLER BS-550 twin-shaft circular log saw machine is designed for longitudinal sawing of logs with a diameter of 120 to 550 mm into two-edged cant and non-edged board. The machine is used as a first row machine, high power production. The machine is designed for sawing logs in one pass, on unedged sawn timber with good surface quality. At the request of the customer, the machine can be completed with our near-station equipment. The maximum diameter of the log, mm: 120-550 Average max. diameter of a log taking into account curvature, mm: 300-500 Minimum length of a log, mm: 2500 Number of installed saws: 6 (8) (Option) Diameter of saws, mm: 550/650/750 (Optional) Diameters of saw shafts, mm: 90 Number speed of saw shafts, rpm: 3800 Power of saw shaft motors, kW: 55, 75, 90, 110 (on request) Feed speed, m / min: 1-30 Power of feed motors, kW: 13.4 Machine dimensions LxWxH, mm: 12300x2650x2250 Weight , kg: 12000