All Radio-controlled Toys suppliers from Indonesia

Product Highlights • Zenmuse Z15-A7 Gimbal for Sony a7S / a7R• Gimbal Provides 360° Camera Rotation• Collapsible Frame and Folding Props• Up to 18 Pound Total Take-Off Weight• Low Gimbal Mounting with Dampening• Retractable Landing Gear• DJI A2 Flight Control System• Supports Futaba FASST / DJI DESST Radios• Up 18 Minutes Flying at 12,000mAh• Compatible with iPad Ground Station DJI Spreading Wings S900 Hexacopter Frame Diagonal Wheelbase 35.4" / 900 mm Frame Arm Length 14.1 / 358 mm Frame Arm Weight Including Motor, ESC, and Propellers: 11.1 oz / 316 g Center Frame Diameter 10.7" / 272 mm Center Frame Weight With Landing Gear Mounting Base and Servos: 2.6 lb / 1.2 kg Landing Gear Dimensions 18.1 x 17.7 x 14.2 / 460 x 450 x 360 mm Motor Stator Size 1.6 x 0.6" / 41 x 14 mm Motor Velocity Constant KV: 400 rpm/V Maximum Power Consumption 500 W Weight With Cooling Fan: 5.6 oz / 158 g Electronic Speed Control (ESC) Working Current 40 A Working Voltage 6S LiPo Signal Frequency 30 to 450 Hz Drive PWM Frequency 8 kHz Weight With Cooling Fan: 1.2 oz / 35 g Propeller Type Folding Material Plastic Size 15 x 5.2" / 381 x 132 mm Weight 0.5 oz / 13 g Flight Parameters Supported Flight Control Systems DJI A2 and WooKong-M Take-Off Weight 10.4 to 18.1 lb / 4.7 to 8.2 Kg Total Weight 7.3 lb / 3.3 Kg Battery Requirements LiPo: 6S, 10000 to 15000 mAh, 15C (minimum) Maximum Power Consumption 3000 W Hover Power Consumption 1000 W at 15 lb / 6.8 Kg takeoff weight Hover Time 18 minutes at 12000 mAh and 15 lb / 6.8 Kg takeoff weight Operating Temperature 14 to 104°F/ -10 to 40°C Packaging Info Box Dimensions (LxWxH) 19.8 x 15.7 x 12.7" DJI A2 Flight Control System for Multi-Rotor Aircraft Supported ESC Output 400 Hz refresh frequency Supported Transmitters With Built-in Receiver: Futaba FASST series and DJI DESST series Supported External Receivers Futaba S-Bus, S-Bus2, DSM2 Other DJI Products Supported Z15, H3-2D, iOSD, 2.4G Bluetooth Data Link, and S800 EVO Hovering Accuracy (GPS Mode) Vertical: ±1.6' / 0.5 mHorizontal: ±4.9' / 1.5 m Maximum Wind Resistance < 26.2 fps (8 m/s) / 17.9 mph (28.8 km/h) Maximum Yaw Angular Velocity 150 deg/s Maximum Tilt Angle 35° Ascent/Descent ±19.7 fps / 6 m/s Power Requirements Maximum: 5 WTypical: 0.3 A at 12.5 V System Requirements Assistant Software: Windows 8, 7, or XP SP3 -- 32 or 64-bit Operating Temperature 23 to 140°F / -5 to 60°C Dimensions Flight Controller: 2.1 x 1.5 x 0.6" / 54 x 39 x 14.9 mmIMU: 1.6 x 1.2 x 1" / 41.3 x 30.5 x 26.3 mmGPS-Compass Pro: 2.4" (diameter) x 0.6" / 62 mm (diameter) x 14.3 mmLED-BTU-I: 1.2 x 1.2 x 0.3" / 30 x 30 x 7.9 mmPMU: 39.5mm x 27.6mm x 9.8mm Weight Overall: 7.9 oz / 224 g Packaging Info Box Dimensions (LxWxH) 6.9 x 4.7 x 2.7" DJI Zenmuse Z15-A7 3-Axis Gimbal for Sony a7S / a7R Peripheral Supported Camera Sony a7S / a7R Supported Lens Sony FE 35mm f/2.8 ZA Control Requirements At least 4 spare receiver channelsS-Bus/PPM receiver supported Software Requirements For Assistant Software: Windows 8, 7, XP SP3 -- 32 or 64-bit Electrical Characteristics Working Current Static Current: 200 mA at 25 VDynamic Current: 400 mA at 25 VLocked-Rotor Current: 4 A at 25 V GCU BEC Output 10 A at 12 V Transmit Power GCU Wireless Video Transmission: 1 A at 12 V Performance Load Weight (Reference Value) 1.4 lb / (622 g) with Sony a7S, FE 35mm f/2.8 ZA lens, battery, lens hood, and SD Card 1.3 lb (580 g) with Sony a7SR, FE 35 mm f2.8 ZA lens, battery, lens hood, and SD Card Controlled Angle Accuracy ±0.01° Maximum Controlled Rotation Speed Pan Axis: ±130°/s Tilt Axis: ±130°/sRoll Axis ±30°/s Controlled Rotation Range Pan Axis Control: ±360° continuous rotationTilt Axis Control: +50°:/-140° Roll Axis Control: ±40° General Power Requirements GCU: 4S to 12 S LiPo (6S if using S800, S1000+) Operating Temperature 14 to 122°F (-10 to 50°C) Dimensions Gimbal: 8.7 x 8.7 x 7.5" (220 x 220 x 190 mm)Camera Frame Dimensions: 5.6 x 3" (142 x 76 mm)GCU: 2.5 x 1.4 x 0.8" (64.2 x 34.1 x 19.5 mm) Weight Gimbal: 2.9 lb (1.3 kg)GCU: 2.2 oz (63 g) Packaging Info Box Dimensions (LxWxH) 10.0 x 9.449 x 9.37"