Oil & gas equipment and machinery in bulk on Qoovee

Capacitive cylindrical apparatuses for liquid and gas media

Capacitive cylindrical apparatuses for liquid and gas media

Diesel fuel vessel

Vertical steel tanks - designed for receiving, storing, dispensing oil products and water, as well as other liquids, in various climatic conditions

Oil and gas separator oil and gas equipment that is used for degassing non-foamy oil during the extraction process and removing associated gas from it.

The travel heater is designed for heating oil products, oil emulsions, viscous oil during transportation through pipelines, at oil fields and oil treatment plants.

Sump is a storage tank used to collect liquids, as well as for their primary mechanical cleaning. Sediment tanks are used both on an industrial scale and in individual farms. At the stage of primary treatment, when sedimentation tanks are mainly used, mechanical impurities and suspended substances are extracted from the liquid under the action of gravitational forces, and biological treatment processes begin; when using the settler as a biocoagulator, fine and colloidal impurities are deposited, and sorption processes occur on the sludge particles. Oil sump is a special equipment designed to separate oil-water emulsion. In the separation process, oil is obtained, which is then collected, and formation water, which is discharged. Mechanical impurities and salts are removed from the raw material together with formation waters. Some oil settler designs also allow the removal of dissolved gas.

ND plunger metering pumps are designed for volumetric pressure metering of neutral and aggressive liquids, emulsions and suspensions. The area of application of pumps is determined by the resistance of the material of which the hydraulic part is made, as well as the resistance of the seal material.   LP metering pumps are positive displacement pumps. By the form of movement of the working bodies - reciprocating.   Pumps of the ND series are single-plunger (double-plunger), horizontal, single-acting, with a manually adjustable flow when the electric motor is stopped. Flow rate-100 l / h The pressure at the outlet of the pump is 250 kgf / cm 2 Order European quality at Ukrainian prices!

The scope of application of the membrane dosing unit is determined by the resistance of the materials of the flow path in the dosing medium and the design of the electrical equipment. The diaphragm pumping dosing unit NDR-2M can be used for dosing harmful substances, flammable and combustible liquids, provided that safety rules are observed. To increase reliability, the diaphragm metering pump NDR-2M is equipped with a double - layer diaphragm made of treated PTFE . Advantages of the diaphragm dosing pump NDR-2M 1. Tightness. During operation of the NDR-2M pump, leakage of the pumped and working fluid is completely excluded. 2. Possibility of regulation without stopping the pump. The design of the NDR-2M pump provides for flow adjustment during pump operation. 3. Simplicity of operation and maintenance.   In the NDR-2M pump, there is no need to constantly monitor the plunger seal and maintain this seal, as is done when using ND plunger pumps. 4. Wear-resistant valve. The diaphragm pump valves are specially designed for long-term operation in contact with aggressive media. Their service life is significantly longer than that of conventional LP pumps. 5. Ability to operate the pump at high pressures up to 100 MPa. Many diaphragm pump manufacturers cannot achieve this. 6. Membrane condition monitoring system. If the diaphragm is damaged, the monitoring system will report this. Even in the event of a diaphragm rupture, the pump remains operational until the end of the process. The signaling device can be both a pressure gauge and electronic devices that will report the problem to the control station. 7. Safety system In the event of a blockage in the outlet piping due to faults or errors, a built-in valve will protect the pump from overload. 8. Saving money Favorable price level achieved through our own production Technical specifications: Feed - 1000 (l / h) The pressure at the pump outlet is 25 kgf / cm 2 European quality - Ukrainian price!          

Company: ZARIF SHVEYNAYA MASHINA LLC (Agent of the American company Tukatech Inc. in Uzbekistan). Title: The world's first CAD program for Clothing "TUKAcad APM (Automatic Model Making)" with online subscription (the first and only one in the world). Purpose: Version for automatic production of clothing models (Russian language available). Price: from $399/month. Payment method: VISA card (to make Internet payments, you must enter the following VISA card details: card number of 16 digits, card expiration date of 4 digits and a special service code of 3 digits, which is indicated on the back of the card) . Advantages of the TUKATECH clothing CAD program purchased through an online subscription: 1. Affordable monthly price for various versions of the TUKATECH clothing CAD program for various categories of users. 2. The clothing CAD program “TUKATECH” is available in various languages, including Russian. 3. The CAD clothing program “TUKATECH” has built-in audio/video lessons in English for learning the program. 4. The user can write the “TUKATECH” clothing CAD installation program, received after online payment, onto a USB flash drive and install it on any computer, and then launch it using his login and password, which allows the user to work in the program remotely at a convenient time from any computer connected to the Internet. 5. The user always works in the latest version of the clothing CAD program “TUKATECH”. Features of the “TUKAcad APM” program: - Unlimited number of patterns (templates) per file. - Unlimited gradation sizes of patterns (templates) per file. - Unlimited sizes of markers (layouts) for placing patterns (templates). - Automatic creation of models and sorting. - Audio/video lessons in English to study the program. The TUKA APM program is the industry's first automatic production system for clothing patterns. Garment suppliers and factories will be able to quickly generate a two-dimensional 2D CAD sample from a bill of materials, including costing rules, and then transfer the sample into TUKAmark to create a cost marker. In the TUKA APM program, digital model makers choose from a library of silhouettes that includes styles such as T-shirts, pants, jackets, suits and more for men and women. Each style is preloaded with corresponding measurement points for user definition. A visual guide shows the location of each measurement point around a garment, so even novice fashion designers can easily create a completely new design from scratch. They can even define valuation rules so that, with the click of a button, the first template is ready to create a costing marker. The TUKAcad APM program includes import/export, digitization, optimization and data generation. Versions of the clothing CAD program “TUKAcad”, available by online subscription: 1. “TUKAcad Learning Edition” program for $19/month, version for fashion students and teachers. 2. “TUKAcad Professional Edition” program for $199/month, version for freelancers and fashion entrepreneurs. 3. “TUKAcad Tailor Edition” program from $349/month, version for making custom clothing. 4. The world's first program “TUKAcad APM” from $399/month, version for automatic production of clothing models. All four versions of the TUKAcad program purchased through an online subscription have their own characteristics and protections. All versions of the TUKAcad program purchased through online licensing on the website have the following features: 1. The required version of the TUKAcad program must be installed on the computer using the installation program TUKAcad_(program version)_setup.exe. 2. After completing the installation of the TUKAcad program on the computer, three programs will appear on the computer desktop: TUKAdesign, TUKAmark and TUKAupdate. 3. To start working on the “TUKAdesign”, “TUKAmark” programs, you must first connect your computer to the Internet, then the user must enter his login and password, which the user entered when purchasing the program through an online subscription on the website, in the window that opens, before starting the programs “ TUKAdesign", "TUKAmark". 4. For all versions of the TUKAcad program (except for the 30-day demo version of the program purchased for $1 on the website) updates are available using the TUKAupdate-Software Manager program. 5. All versions of the “TUKAcad” program installed on a computer through online licensing allow the user to work on the programs remotely from any other computer using their login and password, if the downloaded licensed installation program “TUKAcad” is written to a USB flash drive and installed using it program to another computer connected to the Internet. All versions of the “TUKAcad” program purchased through online licensing on the website have the following protections: 1. The program will work normally for a long time if the computer is connected to the Internet; when the computer is disconnected from the Internet, after a short time of working in this mode, the program will shut down. 2. Ifand, using the same login and password, several users will work on the program, after a short time of working in this mode, the program will be turned off for all users. The Tukatech company was the first in the world to introduce Tukacad, a software solution for the automated creation of templates (patterns), gradations and markers, which allows users to start working with the program immediately after an online subscription on the website “This is the same Award-winning software with all the same great features, including help video lessons. Now we have made it available to everyone at any time. No more waiting to contact a live person to place an order and then waiting for the key to arrive,” said Sonia Chhabra, director of Tukatech. At the beginning of March 2020, our company ZARIF SHVEYNAYA MASHINA LLC became an Agent of the American company Tukatech Inc. for advertising and sale of their equipment, CAD software products for clothing under the “TUKATECH” brand in Uzbekistan. The company "ZARIF SHVEYNAYA MASHINA" LLC is always ready to serve you if you have interests in purchasing equipment and software products for CAD clothing under the "TUKATECH" brand. Our main advantage is the absence of intermediaries when customers purchase products from our foreign partners, since customers directly enter into Contracts with our foreign partners to purchase their products.

Rotary compressors (GAS BLOWERS, BLOWERS) 24VF-M-40-10,8-3-11 (23VF-10 / 1,5SM2U3) are designed for transporting air and gases non-corrosive to cast iron, structural steel and mineral oil. Are applied: · in systems of pneumatic transportation of bulk materials, pneumatic mail containers; · In aeration systems of the sludge pools of treatment facilities, drinking water storage tanks, fish ponds; · When spraying crops and gardens; fire fighting; · When removing dust in printing houses, foundries, filter plants; · For the drive of various devices and mechanisms (grips, clamps). Compressors are equipped with an automation system, silencers for suction and discharge, a non-return valve and, at the request of the customer, it is possible to supply with a noise-attenuating casing. Compressors are designed to operate in pressure or vacuum mode. Characteristics Compressor designation Max. pressure difference, kPa by air Electric motor power Weight Overall dimensions head vacuum m3 / min kW kg mm 24VF-M-40-10.8-3-11 (23VF-10 / 1.5SM2U3) 40 30 10.8 11 264 1230x900x475

Compressors of this group are used in technological processes where compression of various gases (except air) is required, including aggressive, poisonous, explosive, inert and toxic. These compressors are used, for example, in the oil industry to create excess pressure in oil wells, in gas-flare facilities of oil refineries, in many technological processes of the chemical industry, in the space industry to create high-pressure dry nitrogen reserves, etc.

Compressor plants 1KR-2 and 1AKR-2 are used to pump air into cylinders and maintain pressure from 80 to 150 kgf / cm2 in manual (1KR-2) and automatic (1AKR-2) modes. Compressor plants 1KR-2 and 1AKR-2 are used: · for starting diesel-electric units; · To provide industrial facilities with compressed air; · As part of oil drilling rigs. The installation consists of a three-stage compressor, driven by an electric motor through a V-belt drive. Circulating pressure lubrication from gear pump. Liquid cooling, closed loop.

Air compressors 4VU1-5 / 9 series are used to provide compressed air to pneumatic tools, devices, mechanisms; work in pneumatic transportation systems for bulk solids (sand, cement, grain, etc.). Are applied: · at machine-building enterprises; · As part of oil and gas rigs; · At the facilities of the petrochemical, gas, metallurgical, electrochemical, mining and other industries. Piston compressors, V-formed, four-cylinder, two-stage. Drive from an electric motor through an elastic coupling. Forced lubrication. Air cooling of cylinders and refrigerator. Condensate discharge and discharge are automatic. Compressors 4VU1-5 / 9 are equipped with an automatic control and protection system, which provides: · automatic maintenance of pressure in the receiver within specified limits by starting and stopping the compressor, as well as bypassing the air from the discharge to the suction; · Unloading and purging of the compressor when it is stopped; · Electric oil heating in the crankcase (for the northern version); · The ability to purge and unload the compressor from the control panel in manual mode; · Emergency stop during overheating of compressed air; · Emergency stop when the pressure in the lubrication system is below the permissible value. Compressors with relay or microprocessor automation are available. 4VU1-5 / 9 air compressor series are manufactured in the following modifications: 4VU1-5 / 9 M1 compressor 4VU1-5 / 9 M2 compressor 4VU1-5 / 9 M3 compressor (without electric motor and frame) 4VU1-5 / 9 M4 compressor 4VU1- compressor 5/9 M6 (without electric motor, refrigerator, frame, control panel and pressure gauge shield) 4VU1-5 / 9 M7 compressor with electric oil heating (without electric motor and frame) 4VU1-5 / 9 M8 compressor with electric oil heating 4VU1-5 / 9 compressor M32 (without electric motor and frame) Compressor 4VU1-5 / 9 M42

A heat pump is a machine that can transfer heat from a colder environment (air, earth, solar radiation, water from underground strata, water from open reservoirs, water from a common network, heat recovery, industrial waste water) to a hotter one (air, water and other). Under certain conditions, a heat pump with a compressor having a 1 kW electric motor as a drive can provide a thermal power of 3-5 kW, although it is known that the simple heat generation on a resistance with an electric power of 1 kW cannot exceed 1 kW. INSTALLATION APPLICABLE COMPRESSOR REFRIGERANT OVERALL DIMENSIONS, MM WEIGHT (NET), KG NKV60-2-8 “air-water” 5PB20-2-024 - 2 pcs. R22 1280x1830x1860 1300

Designed for pumping air and gases, non-aggressive to gray cast iron, structural steel and mineral oil, and explosion-proof in the conditions of the flow part and gear reducer. It is used ONLY with a fore-vacuum pump and is the second stage of vacuum. It is used in the following processes: drying of transformers and other devices; impregnation of windings, cable, wood and other materials; distillation in metallurgy upon receipt of non-ferrous metals, as well as chemically pure substances in the chemical and pharmaceutical industries; freeze-drying of products, biologically active preparations, vaccines; melting, casting, alloying of metal alloys; sintering of fine-grained and powdery materials in powder metallurgy, during sintering, coking, in the manufacture of refractory products. The DVN pump consists of the pump itself, mounted on the foundation frame, and connected to it by means of an elastic finger coupling of the electric motor. Cooling of the pumps 2ДВН-500 - air, 2ДВН-1500 - water. NAME OF PARAMETERS \ MODEL PUMP VACUUM 2DVN-1500 Speed of action, not less than, l / s 1500 Differential pressure, not more than, kPa 1,0 Maximum residual total pressure, Pa 0,5 Electric motor power, kW 11 Cooling water consumption, l / h 360 Weight, kg 830 Overall dimensions (length x width x height), mm 1840 x 580 x 850 Designation of the recommended fore-vacuum pump NVZ-180

COMPRESSOR HIGH PRESSURE UNITS of the EKPA-2/150 series are intended for forcing air into cylinders and automatically maintaining pressure in them within 150 kgf / cm2 or 200 kgf / cm2. Used: · to start diesel-electric units; · For filling cylinders of breathing apparatus. The installation consists of a compressor and an electric motor. The compressor is three-stage. Circulating pressure lubrication from gear pump. Cooling - with seawater from a vortex type pump. Installation management is automatic. Installations are made in tropical marine execution. At the request of the customer can be made in marine export or marine tropical designs. The automatic control and protection system provides: - automatic start-up of the installation at a system pressure of less than 80 kgf / cm2; - automatic stop at a pressure in the system of 150 or 200 kgf / cm2; - emergency stop when the oil pressure in the lubrication system is reduced to 0.5 kgf / cm2; - emergency stop when the air temperature rises after the refrigerator of the first stage to 60 ° C; - Alarms on the automatic control panel for each emergency stop.

NAME OF PARAMETERS \ MODEL AIR COMPRESSOR 4VU1-5 / 9M32 Final overpressure, kgf / cm2 8 Productivity, m3 / min according to the suction conditions: 5 compressed air: 0.56 Engine power, kW - Crankshaft rotational speed, rpm 735 Weight , kg 750 Overall dimensions, mm 1110 x 960 x 1110 Oil heating in the crankcase -

Designed for pumping air through gas purification units of nuclear power plants, transporting explosion-proof, toxic gases that do not contain droplet liquid and mechanical impurities. The gas blower is a rotational compressor machine made of stainless steel, driven by an electric motor through an elastic coupling. The gas blower can be operated at a suction gas temperature of -10 ° C to + 40 ° C. NAME OF PARAMETERS \ MODEL GAS BLOWING ROTARY E21-50-4A Max. pressure difference, kPa, mode 50 Productivity, m3 / min 1.44 Power of electric motor, kW 4.0 Weight, kg 240 Overall dimensions (length x width x height), mm 1085 x 520 x 510

Designed for the transport of air, toxic and aggressive to oil gases, non-corrosive to cast iron and structural steel, explosion-proof in the flow part and not containing droplet liquid and mechanical impurities. The gas blower is supplied driven by an electric motor through an elastic coupling. Delivery options with an explosion-proof or general industrial electric motor are possible. The gas blower can be operated in pressure or vacuum modes at an ambient temperature of -10 ° C to + 35 ° C. NAME OF PARAMETERS \ MODEL GAS BLOWING ROTARY 1G21-30-2V Max. pressure difference, kPa, pressure mode: 30 vacuum: 30 Productivity, m3 / min 4.32 Power of electric motor, kW 4.0 Weight, kg 285 Overall dimensions (length x width x height), mm 1050 x 450 x 545

Rotary compressor 12VF-M-30-0.6-1.5-2.2 VF compressors: 2VF, 12VF, 32VF and 34VF are designed for transporting air and gases non-corrosive to cast iron, structural steel and mineral oil. VF rotary compressors, compressors 2VF-M-70-21,5-1,5-45, 12VF-M-20-0,69-1,5-2,2, 32VF-M-60-22,1-1 5-45, 32VF-M-80-21.0-1.5-45 (32VF-21 / 1.8SM2U3), 34VF-M-30-38.2-1.5-45, 34VF-M- 40-37.4-1.5-45, 34VF-M-50-36.6-1.5-45 (34VF-37 / 1.5SM4U3) are used: in pneumatic transportation systems for bulk materials, air mail containers; in aeration systems of the sludge pools of treatment facilities, drinking water storage tanks, fish ponds; when spraying crops and gardens; during fire fighting; when removing dust in printing houses, foundries, filter plants; for driving various devices and mechanisms (grips, clamps). Compressor stations 2VF, 12VF, 32VF and 34VF are supplied with vertical and horizontal air flow direction. Compressors 2VF, 12VF, 32VF and 34VF consist of a compressor unit, a check valve, an electric motor, silencers and a noise-attenuating casing. Compressors operate in pressure and vacuum modes. Compressors rotary VF series are issued instead of earlier made compressors of grades 1A, 2AF.

The flange alignment tool is aimed at axial alignment of flange oil and gas pipelines, central heating stations, etc. during their assembly. VFG-9 is distinguished by excellent operational characteristics: high performance and speed of operation, long-lasting operation without additional service. Maximum force of 88.20 kN and operating pressure of 700 bar ensure top quality and speed of operation at small oversize of the tool. Force – 90 kN Maximum operate pressure – 700 bar Gydrocylinder rod stroke – 70 mm Operating distance - up to 245 mm Flange diameter - up to 1000 mm Fastener hole diameterof flanges aligned - not less 38 mm. Oversize: (LxWxH), mm - 510х140х255

The flange alignment tool is aimed at high quality elimination of axial and rotational distortions of flange joints on pipelines of different application. Having compact size, small weight and maximum force of 1 tf only, this item of a flange alignment tool has the following exceptional characteristics: high performance, high speed of operation, reliability and durability. Force – 1 kN Compact body – 3.5 kg Oversizes (LxWxH), mm: - 234х25х151

Force: 150 kN Min. gap: 6 mm Max. opening: 94 mm.⃰ Weight: 6 kg Operating pressure: 81 sm3

A professional mechanical unit for spreading flanges RFM-9 for preventive and remedial maintenance on pipelines of a various diameter (a flange method of joint). The gap setting required for installation of the spreader is 6 mm only, and the maximum spreading width is 92 mm. The mechanism is equipped with step blocks that enable to reduce flange spreading time significantly. The unit can develop force of 98 kN, and the mechanical structure ensures soft performance. Characterized by small weight and compact size, at that being reliable enough. Force: 98 kN Min. gap: 6 mm. Max. opening: 94 mm.⃰ Weight: 6 kg Set weight: 8,5 kg

Газовые баллоны метан от 30л до 120 литров. Все необходимые сертификаты имеются.