其它设备批发在 Qoovee市场

参数 网眼：30-80mm 线径：2-4mm（取决于链节的宽度） 链节宽度：2,3,4m 速度： 200-500（频率可调） 总功率：9.6 千瓦（4台电动机） 链环-边缘弯曲或挤压 线径规格 链节宽度（mm） 三十 40 五十 60 70 80 直径（毫米） 2.0-3.5 2.0-3.5 2.0-3.5 2.0-4.0 2.0-4.0 2.0-4.0   提醒：钢丝包装的刚度必须均匀才能正常生产。 注意：我们也可以根据您的要求制造机器。

工作特点：电动机 该机器采用电气同步控制技术。焊接过程和焊接时间由可编程逻辑控制器系统设置。输入面板是触摸屏和键盘，这使对机器的编程更加逻辑和智能。 该机器由电动机提供动力，可轻松方便地调节焊接压力，并具有从步进电动机传来的装料斜槽，可自由调节区域内的孔格大小，纵向焊丝被喂入，网孔被拉出。步进电机。纵向和横向送入的焊丝已被预先矫直和切割。 主要设定 型号LM-MK 线径6-8mm 额定电压380v 额定功率441kVA 电极数14 像元尺寸100 * 100-150 * 150mm 筛网长度1300-2600mm 净宽1300mm 焊接速度40行/分钟 尺寸7280mm×4110mm×1945mm

1.该设备是我们最新开发的焊接设备。 用于制造由电动机驱动的加强网。     2.将纵向和横向送入的焊丝预先拉直并切断。伺服送入的纵向线自动移动所得的网格。   3.焊接机上的力是从电动机传递的，因此可以很容易地控制焊接电极上的压力。交叉金属丝是从通用进料斗进料的，该进料斗的尺寸是传统进料器的十倍，一次最多可以重达一吨。   4.该设备还带有一个线工具托盘，使操作更加方便。机器的焊接单元具有弹性料斗，可以长时间使用焊接电极。该机器采用电气同步控制技术。   5.焊接过程和焊接时间由可编程逻辑控制器系统设置。输入面板是触摸屏，使对机器进行编程更加逻辑和智能。   6，   今年，我们开始使用水冷变压器。这些变压器配备有冷却单元和散热系统，可以及时清除多余的热量。尽管机器的直径已经变大，但这并没有影响其性能。   技术指标  项目型号 L M-12 线径 5.0-12.0毫米 纵向送丝 断线 交叉送丝 断线 细胞 100 * 100-300 * 300 食物 400-1000伏 电极数 24 筛网宽度 1100-2500毫米 罂粟。速度 50 我/分钟 尺寸（编辑） 26 * 5 * 2.3m 罂粟。长度 12000毫米 重量 14T

1.本机采用电气同步控制技术。焊接过程和焊接时间由可编程逻辑控制器系统设置。   2.输入面板为触摸屏和键盘， 使机器的编程更加逻辑化和智能化，还具有以下特点：紧压一次；多次焊接。   3.该机器由电动马达驱动，有一个由步进马达驱动的装料斜槽，由制动马达馈送的纵向钢丝，并使用步进马达拉出筛网。   4.纵向和横向送入的金属丝被预先矫直和切割，因此用梳理机只能得到一个网眼，该机器的优点是：在纵向金属丝之间可以有不同的孔。   技术指标  项目型号 L M-3A L M-3A / 250 L M-3A / 210 L M-3A / 120 筛网宽度 900-2500毫米 900-2100毫米 900-1200毫米 罂粟。电极数 48 42 24 纵向线径 3-6毫米 交叉线直径 3-6m 米 纵向钢筋之间的距离 50-300毫米 横杆之间的距离 25-300毫米 罂粟。网格长度 6000毫米 纵向和交叉送丝 从料斗上切下金属丝 罂粟。焊接速度 50行/分钟 网格类型 在卡中x 材料 低碳镀锌丝 食物 380 伏 尺寸（编辑） 8 * 3.2 * 1.75m 8 * 2.8 * 1.75m 8 * 1.8 * 1.75m 应用范围：制造主要用于高速公路，铁路，机场和房屋，以及购物车，   展示架等...

Material: Low carbon (black or galvanized) or stainless wire. The machine has a closed correct system, vertical gearbox , and electromagnetic stepless speed regulation. & nbsp; You can get strong and even cells. Welding is controlled three-phase electron and electricity. & nbsp; The machine will stop working automatically by the CNC when the length has reached the desired length. Welding power is large, regulation control is excellent. < / span> (Cross wire feed by rotating shuttle) & middot; & nbsp; Model Item Л М-4X1 & rsquo; & rsquo; Л M-5x1 & rsquo; & rsquo; Л M-6x1 & rsquo; & rsquo; & nbsp; Л M-7x1 & rsquo; & rsquo; Л М-2.5mx1 & rsquo; & rsquo; Grid Width 914.4-1219, 2mm 914.4-1524mm < / span> 1219.2-1828.8mm 1828.8-2133, 6mm 1828.8-2500mm < / span> Cell < / p> 1 & rsquo; & rsquo; -4 & rsquo ; & rsquo; （ 6 & rsquo; & rsquo; ） Wire diameter 1.4-2, 7mm Speed ​​ < / p> 60-80 rows / min Food < / p> 380 / 220V, 50- 60HZ Mac. roll length 80m Dimensions < / p> 2.7 * 1, 75 * 1.45m 3.1 * 1, 75 * 1.45m 3.5 * 1, 75 * 1.45m 3.9 * 1, 75 * 1,5m 4.3 * 1.75 * 1.5m Material < / p> low carbon, galvanized wire & nbsp; Machine for the production of welded prairie mesh fence (Model Л M- 7X1-A, L М-2,5МХ1-А) Item & nbsp; & nbsp; Model Л М- 7X1-A Л M- 2,5МХ1-А Wire diameter 2-3mm Cell 1 & rsquo; & rsquo; -12 & rsquo ; & rsquo; (25.4mm-304.8mm) Speed ​​ < / p> 40-50 rows / min Fingering < / p> 380 / 220v, 50- 60HZ Mac. roll length 100m < / p> Dimensions < / p> 4.1 * 2.1 * 1.8m < span style = "mso-spacerun: 'yes'; font-family: Arial; mso-fareast-font-family: 'Lingoes Unicode'; color: # 000000; font-size: 12.0000pt; mso-font-kerning: 0.0000 pt; "> 4.5 * 2.1 * 1.8m Material low carbon, galvanized wire Grid Width 2133.6-1828.8mm 2500-1828.8mm & nbsp; Medium Welding Machine Item & nbsp; & nbsp; & nbsp; Model Л М-4Х1 / 2 < / p> Л М-5Х1 / 2 < / p> Л М-6Х1 / 2 < / p> Cell 1/2 & rsquo; & rsquo; -1 & rsquo; & rsquo; (12.7mm, 25.4mm) Grid Width 914.4-1219.2mm < / p> 914.4-1524mm 1219.2-1828.2mm < / p> Wire diameter 0.7-1.6mm < / p> 0.7-1.6mm 0.9-1.6mm < / p> Speed ​​ 100 lines / min 85 lines / min 70 lines / min Mac. roll length 100m Food 380V / 220V, 50-60HZ Dimensions 2.7 * 1.75 * 1.45m 3.1 * 1.75 * 1.45m < / span> 3.5 * 1.75 * 1.45m < / span> Material low-carbon, galvanized wire & nbsp; Item & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp ; & nbsp; Model Л М-4Х1 Л М-5Х1 Л M-6X1 Cell 1 & rsquo; & rsquo; -4 & rsquo; & rsquo; (25.4mm , 50.8mm, 76.2mm, 101.6mm) Grid Width 914.4-1219.2mm < / p> 914.4-1524mm 1219.2-1828.2mm < / p> Wire diameter 0.8-1.8mm < / p> 0.8-1.8mm < / p> 1.2-1.8mm < / p> Speed ​​ 100 lines / min 90 lines / min 70 lines / min Mac. roll length 100m Food 380V / 220V, 50-60HZ < / p> Dimensions 2.7 * 1.75 * 1.45m < / span> 3.1 * 1.75 * 1.45m < / span> 3.5 * 1.75 * 1.45m < / span> Material low carbon, galvanized wire & nbsp; & nbsp; Small welding machine Item Model Л М-4х1 / 2 Л М-5x1 / 2 Cell < / p> 1/2 & rsquo; & rsquo; -1 & rsquo; & rsquo; (12.7mm-25.4mm) Wire diameter 0.55-0, 9mm & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; 0.6-1, 0mm Width < / p> 1219.2-914.4mm 1524-914.4mm Speed ​​ < / p> 120 lines / min & nbsp; & nbsp ; & nbsp; & nbsp; & nbsp; & nbsp; 90 lines / min Food < / p> 380 / 220V, 50- 60HZ Max roll length 120m < / p> Dimensions < / p> 2.7 * 1, 75 * 1,4m & nbsp; 3.1 * 1, 75 * 1.4 Material < / p> low carbon and galvanized wire < span style = "mso-spacerun: 'yes'; font-family: Arial; mso-fareast-font-family: 宋家; font-size: 12.0000pt; mso-font-kerning: 0.0000pt;"> Mini - < / span> welding & nbsp; car & nbsp; Clause < span style = "mso-spacerun: 'yes'; font-family: Arial; mso-fareast-font-family: 'Lingoes Unicode'; color: # 000000; font-size: 12.0000pt; mso-font-kerning: 0.0000 pt; "> Model Л М-3Х1 / 4 Л М-1Х1 / 4 Л М-4Х1 / 4 Л М-5Х1 / 4 Grid Width 914.4MM 1000mm < / p> 1219.2mm 1524mm < / p> Cell < / p> 6.35-12, 7mm Wire diameter 0.35-0.75mm Speed ​​ < / p> 100 lines / min Food < / p> 380 / 220V, 50-60HZ Mac. roll length 150m < / p> Dimensions < / p> 2.15 * 1, 8 * 1.7m 2.45 * 1, 8 * 1.7m 2.75 * 1, 8 * 1.7m 3.0 * 1, 8 * 1.7m Material < / p> low carbon, galvanized wire & nbsp; Heavy & nbsp; welding machine Clause < span style = "mso-spacerun: 'yes'; font-family: Arial; mso-fareast-font-family: 'Lingoes Unicode'; color: # 000000; font-size: 12.0000pt; mso-font-kerning: 0.0000 pt; "> & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; Model Л М-6Х1 / 2 Л M-2mX1 / 2 Л М-7Х1 / 2 Grid Width 1828.8mm 2000mm 2133.6mm Cell < / p> 1/2 & rsquo; & rsquo; (12.7mm) Wire diameter 0.5-1, 1mm Speed ​​ 70 lines / min Food < / p> 380 / 220V, 50- 60HZ Mac. roll length 70m < / p> Dimensions < / p> 3.05 * 1, 9 * 1,75m 3.35 * 1, 9 * 1,75m 3.75 * 1, 9 * 1,75m Material < / p> low carbon, galvanized wire & nbsp; 1 1 1 1 < xml> MicrosoftInternetExplorer4 0 2 DrawingNotSpecified> Normal 0 < ! - [if gte mso 9]> 1 1 1 1 MicrosoftInternetExplorer4 0 2 DocumentNotSpecified 7.8 磅 w: PunctuationKerning> Normal 0

1.本机采用电气同步控制技术。焊接过程和焊接时间由数字集成电路控制。焊接过程稳定准确。   2.焊接接头的接触斑小，无缺陷，强度高。   3.机器将纵向线段从线圈中拉出。该设备配备有用于切割金属丝的专用设备以及用于确定孔格位置的系统，因此，网孔元素之间的距离相同且恒定，这对于切割最终产品是必需的。   4.该机器具有拉网系统，该拉网系统在机械负载的作用下切断网的金属丝元件，并带有网定位装置。   5，这可以让您更紧密地控制线环的孔和网格的开放部分，从而更准确地执行焊接操作。   6.焊接网可以通过辊或卡获得。   技术指标  型号LM-2500 LM-2100 LM-1200 网眼宽度900-2500mm 900-2100mm 900-1200mm 罂粟。电极数48 42 24 线径3.0-5.0mm 电池50 * 50-200 * 200mm 横丝进给模式从料斗 纵向送丝方式从线圈开始 手动设置单元 罂粟。焊接速度45行/分钟 净类型纸卷或卡片 材质低碳镀锌丝 电源380v 50HZ

规格： 1。          模型：     HM-538 2。          产品名称：         无压台下锅炉 3。          容量：热3.5L 4，          电压：    110V / 60Hz，220V   50〜60赫兹 5，          尺寸：      宽19厘米x深22厘米x高40厘米 6，          功耗：热750 W 7          筛选器类型：       反渗透（具有NSF证书）  特征： 1。          缺水警告：缺水警告带有错误代码，可防止过热。 2。          无压力系统：防止水箱泄漏。

规格： 1。          模型     HS-10GB 2。          产品名称10GB存储式锅炉 3。          容量  热门10GB 4，          电压    交流220V   50/60赫兹 5，          尺寸      宽42厘米x厚41厘米x高83厘米 6，          能量消耗       热4000 W     7          过滤器类型       2级过滤（第1个PP沉淀物过滤器，第2个活性炭过滤器）  特征： 1。          儿童安全锁：热水安全锁，避免意外燃烧。    2。          漏电保护：装有国家CNS标准漏电保护器。无压力系统：防止水箱泄漏。 3。          双重过热保护：双重过热保护，以确保最高的安全性。    4，          错误代码显示：错误代码显示，带有错误代码，可进行更精确的维护。

规格： 1。          模型：     HS-6L 2。          产品名称：         6L电热锅炉 3。          容量：6公升 4，          电压：    110V / 220V，50/60赫兹 5，          尺寸：      宽28厘米x深26厘米x高52厘米     6，          能量消耗：       热750 W  特征： 1。          LED温度显示：LED HOT /温/冷水温度显示 2。          热水温度设置：可调热水温度。        

规格： 1。          模型     HM-190 2。          产品名称热/温/冷饮水机 3。          容量  热2L /暖2.2L /冷2.8L 4，          电压    110V / 60Hz的; 220V   50〜60赫兹 5，          尺寸      宽26厘米x深54厘米x高58厘米 6，          能量消耗       热500 W，冷130 W 7          过滤器类型       5阶段内置反渗透 8。          紫外线杀菌系统：可选   特征： 1。          连续注水：按下一个按钮按钮连续注水设置长达60秒。    2。          清晰的说明：带有按钮指示器的人性化设计。    3。          重新沸腾设置：针对高温要求的重新沸腾设置。 4，          LED温度显示：LED HOT /温/冷水温度显示。    5，          6级热水温度设置：可调热水温度。    6，          缺水警告：缺水警告带有错误代码，可防止过热。 7          冷水温度设置：可调冷水温度。

规格： 1。          模型：     HM-6991 2。          产品名称：         台式热/温/冷饮水机 3。          容量：热2.5L /暖12L /冷1.2L 4，          电压：    110V / 60Hz的; 220V   50〜60赫兹 5，          尺寸：      宽39厘米x厚41厘米x高68厘米 6，          能量消耗：       热750 W，冷130 W  特征： 1。          缺水警告：缺水警告带有错误代码，可防止过热。    2。          冷水温度设置：可调冷水温度。    3。          重新沸腾设置：针对高温要求的重新沸腾设置。

规格： 1。          模型：         HM-700 2。          产品名称：     热，温，冷饮水机 3。          容量：      热15升，热7升，   冷3L 4，          电压：        110V / 60Hz的; 220V   50〜60赫兹 5，          尺寸：W42cm x D41cm x H127cm 6，          能量消耗：   热1100 W，冷100 W 7          筛选器类型：         （1）2级过滤（第1个PP沉淀物过滤器，第2个活性炭过滤器） （2）反渗透（具有NSF证书）  特征： 1。          缺水警告：缺水警告带有错误代码，可防止过热。    2。          LED温度显示：LED HOT /温/冷水温度显示。    3。          重新沸腾设置：针对高温要求的重新沸腾设置。 4，          清晰的说明：带有按钮指示器的人性化设计。    5，          冷水温度设置：可调冷水温度。    6，          连续注水：按下一个按钮按钮连续注水设置长达60秒。

规格： 1。          型号：HS-990 2。          产品名称：       热/温/冷数字饮水机 3。          容量：热22升/暖8升/冷4升 4，          电压：    110V / 220V; 50〜60赫兹 5，          尺寸：      宽43厘米x宽47厘米x高135厘米 6，          能量消耗：       1100 W热  冷130 W 7。          筛选器类型：       5级反渗透（LG.RO膜）  特征： 1。          ECO待机：此功能可以根据用户的生活风格进行调整。 2。          连续注水：按下一个按钮按钮连续注水设置长达60秒。 3。          缺水警告：缺水警告带有错误代码，可防止过热。 4，          LED温度显示：LED HOT /温/冷水温度显示 5，          清晰的说明：带有按钮指示器的人性化设计。 6，          冷水温度设置：可调冷水温度。 7          LED灯：LED灯指示出水口位置，避免危险。 8。          重新沸腾设置：针对高温要求的重新沸腾设置。

1.采用先进的PLC性能稳定，并通过传送带自动传送瓶胚。 2.通过使瓶子自身旋转并在红外预热器中同时在轨道中旋转，使渗透性强，热量分布好而迅速。 3.高度的可调节性，通过使用自动恒温装置调节预热区域中的灯管和反射板的长度以及预热器中的外部温度，从而使预热器能够预热形状的预型件。 4，每次机械动作均配有安全自动锁装置，安全性高，在某些程序发生故障的情况下，使程序进入安全状态。 5.采用气缸代替油泵驱动动作，无污染，低噪音。 6.通过在机器的气压图中将吹气和作用分为三个部分，使吹气和机械作用满足不同的大气压。 7.强大的高压夹紧力和双曲柄连杆可锁定模具。 8.两种操作方式：自动和手动。 9.阀门位置安全，可靠，独特的设计，使机器的气压图更容易理解。 10，成本低，效率高，操作简便，维护方便等。 11.避免污染瓶身。 12.采用瓶装模具的冷却系统进行冷却的理想效果。 13.易于安装和启动。 14.低废品率：小于0.2％。 15.全自动机器，一个人就可以操作机器。 16.采用新型双弯臂和四杆夹紧结构（已获专利）：横向；中模板平行移动；两个模板之间的距离由链轮调节。因此，夹紧力非常强。 17.省电设计，可以增加您的利润。 18.分离式空气控制系统，旨在避免废物污染。 19.PP吹瓶机的预热器应比PET吹瓶机的大。

Airtech动力学鼓风机（AKB）系列是动态鼓风机，它通过非接触式旋转叶轮将动能传递至介质。气体通过高性能钛涡轮叶轮吸入。最小化的内部损耗可实现极高的效率，并在高达12500 RPM的转速下实现无声压缩。切向入口和出口的位置可以根据应用需求单独选择。可靠的IE4 / NEMA超优质鼓风机电机也可提供集成插头和变频驱动器。

     臭氧的应用 存储蔬菜和水果 臭氧在冷藏水果和蔬菜中的使用 农业和畜牧业 家禽养殖场的空气消毒 刺激动植物的生长和重要活动 养蜂业-对抗球虫病 在温室中使用臭氧发生器 对抗植物病 谷物处理 延长保质期并保持食品，谷物等的质量。 食品工业 用臭氧消毒空气，处所，设备和产品 臭氧在肉类和奶制品工业中的使用 食品生产消毒 饮用水和废物的清洁 游泳池水臭氧化 臭氧处理在瓶装水灌装中的应用 使用臭氧处理站去除水中的铁和锰 水产养殖-使用臭氧净化水族馆和养鱼场中的水 污水处理 洗衣，清洁，除臭 酒店，疗养院，乡村度假屋 清洁和洗车 优化洗衣 消除顽固的燃烧，烟草，油漆和其他气味 洗车 用臭氧去除石油产品

它用于工业和公共建筑的供气和排气通风系统。设计用于移动温度高达+40°C的空气或其他非爆炸性，非腐蚀性气体混合物，不含粘性物质和纤维材料，且灰尘和其他固体杂质的浓度不超过100 mg / m3。

Supply of shut-off valves, gate valves, ball valves, gates, any construction and other equipment directly from the manufacturer Provision of advisory and other services for the implementation and development in the market of Uzbekistan and Central Asia

Fastening of the axle bridge (bridge-frame) to the emergency tank is carried out by means of two magnetic blocks М250, similar to used in the "Console" unit. The magnetic blocks are hingedly held together to the housing, inside of which the carriage moves along the guides with the sealing unit, which includes a press-screw and a rubber element.The set of delivery includes two types of sealing element: a cone and a gasket with diameters of 20 mm. Replacing one sealing element with another takes no more than 3 seconds.A cone is used to seal round gaps and holes, and a flat gasket is used for cracks or a group of small fistulas. Due to the movements of the carriage relative to the body and the sealing unit relative to the carriage, the sealing element is supplied directly to the leakage.The "aiming" zone is a 50x50 mm square surface. The surface to which the magnetic grippers will be attached is must be cleaned from dirt and coating.Product technical characteristics:Type - Bridge-frame (axle bridge) unitPressing force of the magnetic blocks to the metal surface - Not less than 2 * 250 kgfDiameter of the sealed tank (pipeline) - Not less than 400 mmThe maximum diameter of the sealed gap - At a pressure of 60 atm - not less than 7 mmInstallation time, min - 1-2Required number of workers - 1-2Dimensions, mm - 347x111x151Weight, kg - 5.4Service life - At the very least 10 years.

The K200 console is intended to eliminate an emergency leak. The console is represents a magnetic block, which is also the hull of the unit. On the block with the help of a bracket fixed sealing unit, which includes a press-screw and a replaceable rubber sealing element. The set of delivery includes two types of sealing elements: a cone with a diameter of 12 mm and a flattened cone with a diameter of 12 mm and 5 mm. The mount allows you to replace one type of sealing element with another in few seconds. Fastening the press-screw to the bracket provides the ability to move the sealing unit in the transverse direction relative to the body by a stroke of ± 2 mm and tilt the sealing unit in the longitudinal plane in the range of angles 5 ° - 60 ° in vertical. Installation and removal of the K200 console carrying out by using a handle. A cone is used to seal round holes, in other cases a flattened cone. Product technical characteristics: Type – Console unit Pressing force of the magnetic blocks to the metal surface - Not less than 200 kgf Diameter of the sealed tank (pipeline) - From 80 to 100 mm Maximum diameter of the sealed gap - At a pressure of 25 atm - not less than 3 mm Installation time, min - 1 Required amount of workers - 1 Dimensions, mm - 149x96x61 Weight, kg - 0.9 Service life - At the very least 10 years.

Three-plunger crank pumps PT and T are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 to plus 200 ° С). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Three-plunger pumps of the PT and T type are used in industries requiring high pressures, including explosion and fire hazardous ones. Areas of use: ·                  oil production: drilling and well workover, circumferential waterflooding, enhanced oil recovery, oil dewaxing and well equipment. ·                  chemical and petrochemical industry: production of ammonia, urea, melamine, acetic, nitric and other acids, supply of reagents under high pressure; ·                  mechanical engineering: hydraulic cutting, hydroforming, power equipment for hydraulic presses. ·                  power engineering: feed pumps for boiler plants, steam generators. ·                  food industry: reverse osmosis plants, homogenizers. ·                  utilities: repair and pressure testing of pipelines and hydraulic systems, flushing of the sewage system. On the basis of pumping units, UN, UPG units are manufactured, which are designed for hydrotreating sewage and other pipelines with a diameter of 80 mm to 600 mm, as well as external and internal surfaces of various technological equipment, mechanisms, buildings, structures and other objects. Specifications: Supply - 1.25-3.2 m3 / hour; Pressure at the outlet of the pump-10 MPa Execution D1 Weight-355 kg Check the cost with the manager! Manufacturer's warranty - 1 year!

应用：变压器内部的油主要起绝缘作用，此外，它们还具有抑制电晕放电和电弧的作用，还可以作为机器内部的制冷剂。这些油必须绝对清洁和干燥，以实现并保持最佳的绝缘性能和介电强度。这就是变压器油净化的需要。 ASSEN ZYD 变压器油净化器是变压器可靠性、性能和耐用性的关键。变压器的绝缘油必须不含水分、溶解的气体和随着油老化而积累的颗粒。甚至一些新油也可能需要加工以将其含量限制在可接受的水平。特点： 1. 对高效绝缘油处理厂的期望。 2、适用于大型电力变压器安装维修中的油处理、油抽真空和热油循环。 3. 操作简单无故障。 4、工艺参数在线测量和记录。处理后 水分 PPM 3 气体含量% 0.01 杂质尺寸 µm ≤ 1（无游离碳） 击穿电压 kV ≥ 75 IFT 达因 / cm ≥ 40 酸值 mgKOH / g ≤ 0.03 介电损耗因数 tan δ (90 °C) ≤ 0.001 ASSEN保证根据本规范提供的设备在正常使用和服务下不会出现材料和工艺缺陷，自发货之日起二十六 (26) 个月或启动后二十四 (24) 个月。系统。 ... ASSEN 在本保修条款下的义务仅限于修理或提供类似部件以更换在保修期内被证明有缺陷的任何部件。 1.我们根据您的要求定制机器。 2. 我们有超过 20 年的出口经验。 3. 我们以有竞争力的价格为客户提供高质量的产品。 4. 我们为客户提供优质的售后服务。 5.我们不满意，直到我们的客户满意。

WE ARE PROVIDING PROJECT BASED OFFERS THEREFORE THE PRICES WERE WRITTEN REPRESENTATIVE. FOR MORE INFORMATION, YOU CAN GET INFORMATION FROM +90 535 718 10 71 PHONE NUMBER.

Founded in 1954 Torin produces quality automotive products for service professionals.

Founded in 1954 Torin produces quality automotive products for service professionals.

Founded in 1954 Torin produces quality automotive products for service professionals.

Founded in 1954 Torin produces quality automotive products for service professionals.

Founded in 1954 Torin produces quality automotive products for service professionals.

Characteristic: Mixing feeds evenly and making them into grits, which can avoid the waste of feeds, money, time, and size is adjustable. Integrate operation from mixing feeds to making grits means time saving and convenient.   Direction: Pour feeds into the stirring bucket, and mix thoroughly with proper amount of water (or vitamin or other nutriment). After mixing thoroughly (2 ~ 3 minutes), adjust the outlet of the stirring bucket to a proper location and turn on the switch of machine. (With larger outlet, the grain would be longer; with smaller outlet, the grain would be shorter.) With these steps, the manufacture of grain can be accomplished.   Caution: The machine must be cleaned after using. Be aware of losing the oil of variable speed motor.

HDPE Geomembrane Pond Lining If you are interested in this product, please send us your requirements. & nbsp; Feature: < / span> Reduced pond cleaning time, no tillage, increased nesting frequency. Reduce pollution and reduce the risk of disease. More efficient aeration , saving energy. Prevent mixing feed with soil, reducing feed loss. No tillage required, especially suitable for sandy and acidic soils, less lime is used. < span lang = "EN-US"> Water quality can be monitored and improved. < p class = "MsoNormal"> The shrimps could not hide inside the soil during harvest, increase yields and be more productive. One-time investment over 10 years of life.

Feed Size from 0.5~3MM   Characteristic: Double powerful blowing outlets blow feeds far and covers wide area. Single roller distributor can adjust required feeding quantity. Exclusively centrifugal motor. Adopt multi-bladed and aluminum-bladed fan with stable operating. Can be fitted with timer. Applicable for feeding any kind of fish. Stainless steel housing, weather proof and high durability.

Specification: Pressure Performance Table Pressure Performance Curve Noise Level Outline Dimension Structure & Material List Typical Applications   Characteristic: Wide range for air volume, pressure and vacuum. Bore: 25A ~ 300A (1"~12") Capacity: 0.1 ~ 120m3/min. Pressure: 0 ~ 8,000mmAq Vacuum: -5,000mmAq Stable air flow and less pressure variation. Clean air not with oil moist. Solid construction, easy maintenance. Bearings are all lubricated by oil moist, high durability. Made under "ISO9001" system.

SUS316 Material Bore 2" - 8" High Head Large Volume Sea Water Use   Features: Model CT-C pump, pump body, pump up water impeller and enter water access cap, quarry SUS316 cast materials, the axis is a SUS316 material, the mechanical axle seals VFA and VTSIC(Tungsten) material, corrosion-resistant, the stability is high, can give play to extremely high function and lift-span.   Application:  Sea-farming, shipping.

Characteristic: Allowing oxygen transfer into the water quickly. Increase higher efficiency of oxygen transfer, excellent water mixing and circulation pattern. Decomposes harmful material or gas. The circulating water will reactivate with the bottom of the pond, establishing and maintaining a better water quality for the shrimp or fish. Best equipment to be used together with the Paddlewheel Aerator. Farms or ponds, which culture shrimp, fish and any kind of Aquaculture. Treatment for waste water.

Characteristic: Rotation design improves oxygen-content of water, harmful gases escape by water-circulation. Enhance the exchange of gases with the atmosphere and obtains the strongest water current. The unique Aerator Motor Made Under "ISO9001" And "ISO14001" System Suitable for various kind of aquaculture pond : fish, eel, clam, crab, etc.

Characteristic: Providing substantial and stronger water current to improve pond water circulation and oxygenation. With more impellers than normal model, which can benefit a large breeding area, thus, less power consumption and less investment cost. Few aerator is needed, reduce maintenance and labor costs. With diesel engine drive, especially suitable for area without electricity support and for emergency use. "100% New Raw Materials" are guaranteed to be used in our products.

Characteristic: Best Quality Silicon Steel Plate. Energy Saving. High Oxygenation Performance From Unique Design. Sturdy Stainless Steel Frame Ensure Without Any Deformation. Easy Maintenance. The Unique Aerator Motor Made Under "ISO9001"And "ISO14001" System. "100% New Raw Materials"are guaranteed to be used in our products.   Note: Since May 2017 Our New 1 HP / 2 HP three-phase high efficiency electricity saving motors Will Be Launched.  Feel free to contact us if you are interested in our new product.

Mainly Designed For Lake & Sea. Be Able To Be Used For Harvest. Resist Maximum to 6M Wave. Still Very Strong And Working Well During Typhoon. Having Good Feedback From The Biggest Tilapia Farm In The World And Other Governmental Projects.   Function: Marine cage farming system can be used in various water environments including lake, sea and river, etc. Suitable for intensive farming. Suitable for different species, such as Tilapia, Japanese Sea Bream, Goldlined Sea Bream, Cobia, Greater Amberjack, Blue-Banded Sea Perch, Spangled Emperor (Sand Snapper, Parrot-Fish), Snappers, Yellow-Wax Pampano, Orange-Spotted Grouper, Red Drum, Catfish, Striped bass, Bluegill sunfish, Crappie, Carp, etc.   Characteristic: "One-Piece Injection Molded" HDPE 80 Bracket, extremely sturdy. HDPE 80 Floating Pipe and HDPE 100 Handrail Pipe offer excellent ESCR (Environmental Stress Cracking Resistance) and resist deformation. High carbon component, strong UV resistance ensures sound durability, low maintenance and investment cost. Removable Handrail T Bar makes more easily assembling, simplified harvesting & efficient maintenance as well as resistant to corrosion. Heavy duty standing pole. Bear heavier net weight. All the "Round" and "Square" shape cages can be tailor-made.

1.        Core Box Size (LxHxW) mm: 600x400x300 2.        Max. Core Size (LxHxW) mm: 520x380x300 3.        Operation Mode: Manual/Single Cycle/Auto Cycle 4.        Production Speed: 40 - 70 seconds/cycle, depends on size and shape of products 5.        Heating Type: LPG or Electrical 6.        Max. Blowing Capacity: 1 15-30 kgs 7.        Sand Storage Capacity: 200-300 kgs 8.        Operation Pressure: 5-6 kgs/cm2 9.        Sand Blowing Pressure: 1-4 kgs/cm2 10.    Weight: 2900 kgs 11.    Dimension(m): 2.5x3.7x3.3

1.        Core Box Size (LxHxW) mm: 500x400x250 2.        Max. Core Size (LxHxW) mm: 420x380x200 3.        Operation Mode: Manual/Single Cycle/Auto Cycle 4.        Production Speed: 40 - 70 seconds/cycle, depends on size and shape of products 5.        Heating Type: LPG or Electrical 6.        Max. Blowing Capacity: 15-25 kgs 7.        Sand Storage Capacity: 200-300 kgs 8.        Operation Pressure: 5-6 kgs/cm2 9.        Sand Blowing Pressure: 1-4 kgs/cm2 10.    Weight: 2700 kgs 11.    Dimension(m): 2.1x3.5x3.1