MIESAUOPT

- LIQUID FOIL 1 KS ready-to-use roller or trowel application tested in accordance with EN 14891 very low emission - EC1-PLUS Solvent-free, waterproof, one-component, permanently elastic, seamless and seamless composite seal. Indoor use only for bumpless sealing of wall and floor surfaces in damp areas (eg showers, bathrooms, steam baths, etc.). To protect against unpressurized water draining directly under the ceramic floor. In accordance with EN 14891, ÖNORM B 3407 W1-W4 and in accordance with DIN 18534 for water exposure class W0-I, W1-I, W2-I (wall) and in accordance with the test principles for issuing a general building inspection certificate ... Consumption about 1.5 kg / m² for a layer thickness of mm (about 0.8 kg / m² for a layer thickness of 0.5 mm) Color yellow

suitable for laying parquet, tiles and natural stone safer on problem substrates relieves stress Relief of tension reinforcing fleece for laying parquet, tiles and natural stone, especially on problem substrates. Can be used as a reinforcing underlay under solid parquet and ready-to-install parquet, as well as on all conventional, ready-to-install substrates. Especially for use on poor, low-strength substrates and in the renovation sector for dry screeds, chipboard and mastic asphalt. Color white

high-performance noise reduction composite layer that releases stresses more safely on problem substrates Maximum impact noise reduction and stress relief - achieved by multi-layer sandwich construction (built-in special rubber mat) - release plate for ceramic tiles, as well as for parquet and multi-layer parquet, especially for problematic substrates. It can be used to isolate and reduce noise under ceramic coatings on walls and floors in rooms, both for new buildings and especially in the renovation zone. Also suitable for laying parquet and laminate floors on all standard substrates, as well as gluing old tiles and natural stone surfaces, old substrates with glued adhesives and fillers, mastic asphalt, dry screeds and chipboards. Ceramic tiles with a material thickness of less than 10 mm and natural stone with a material thickness of less than 15 mm, as well as for all coating formats less than 30 x 30 cm, require a fiber-reinforced filler filling. White

stress-relieving underlayment reduces impact noise safer on problem substrates very low emissions - EC1-PLUS Stress relief release and impact noise suppression boards for indoor and multi-layer parquet flooring and indoor and outdoor ceramic tiles and natural stone air. The board is used specifically for problematic substrates. The Unitop disconnector plate is a very low emission (GEV-compliant) laying material that is purulent and rot-resistant. It can be used as a decoupling and impact noise reduction board on walls and floors in rooms under many cover materials for traffic loads up to 5 kN / m². Only the 4 mm slab is suitable for use in underfloor heating systems. Color white

- stress-relieving underlayment reduces impact noise safer on problem substrates very low emissions - EC1-PLUS Stress-relieving decoupling and impact attenuation boards for indoor and multi-layer parquet flooring and indoor and outdoor ceramic tiles and natural stone open air. The board is used specifically for problematic substrates. The Unitop disconnector plate is a very low emission (GEV-compliant) laying material that is purulent and rot-resistant. It can be used as a decoupling and impact noise reduction board on walls and floors in rooms under many cover materials for traffic loads up to 5 kN / m². Only the 4 mm slab is suitable for use in underfloor heating systems. Color white

- stress-relieving underlayment reduces impact noise safer on problem substrates very low emissions - EC1-PLUS Stress-relieving decoupling and impact attenuation boards for indoor and multi-layer parquet flooring and indoor and outdoor ceramic tiles and natural stone open air. The board is used specifically for problematic substrates. The Unitop disconnector plate is a very low emission (GEV-compliant) laying material that is purulent and rot-resistant. It can be used as a decoupling and impact noise reduction board on walls and floors in rooms under many cover materials for traffic loads up to 5 kN / m². Only the 4 mm slab is suitable for use in underfloor heating systems. White

cement binder frost resistance can be filled in gradients up to 3% stable and can be adjusted to flow. Powdery, plastic hardened, low tension, self-leveling, hydraulically set leveling compound. For indoor and outdoor use, especially for evening extreme unevenness such as hollow slabs and slabs, as well as large area level compensation up to 3% incline. Consumption about 1.6 kg / m² per layer thickness mm

high-calcined leveling compound fast drying extremely good flow very low emission, EC1-PLUS Self-leveling, flowable, pumpable, polymer-modified leveling compounds. Indoors only, for load-bearing cementitious screeds and concrete. For the production of flat substrates before laying all types of floor coverings, especially for extreme evening unevenness, up to 30 mm. Not suitable for commercial use or for driving motor vehicles. Consumption about 1.5 kg / m² per layer thickness mm

indoor and outdoor ready-to-use early strength Prefabricated, universally usable dry mortar for screed production Can be processed manually or by machine. It can be used as floating, grease-free or as a compound screed and is suitable as a heated screed without additional additives. Screed with high early strength and extremely low moisture content, which is also suitable for damp rooms, but not for very high sustained water loads. Consumption about 20 kg / m² / cm

with trass content very fast hardening high stability up to 50 mm in one layer Trass-containing, highly hardened, water and frost resistant, very fast hardening, hydraulically setting leveling mortar. Thanks to special additives, the mortar hardens without tension up to 50 mm and demonstrates very good processing properties. Indoors and outdoors for leveling uneven walls and floor areas before tiling. Consumption about 1.6 kg / m² per layer thickness mm

SCREADING CLAMPS