MIESAUOPT

- for indoor and outdoor use for walls and floors high flexibility, abrasion resistance and pearl effect for natural stone, fine porcelain stoneware and much more for joints 1 to 6 mm wide (national specifications must be observed and observed) Powdered , food safe, water and frost resistant, super smooth, high strength and flexible pearl effect grout. Simple processing and further processing are possible without delay due to the simple application of filler in the joint and the same fast application, especially for non-absorbent material. In addition, the low water consumption of the highly abrasive grout reliably prevents staining. For grouting joints 1 to 6 mm wide for indoor and outdoor wall and floor surfaces. For water- and dirt-repellent grouting of ceramic tiles, boards, mosaics, as well as natural stone and fine porcelain stoneware. Suitable for underfloor heating systems in residential areas, as well as for wet rooms, terraces and balconies. Consumption 0.2 - 0.9 kg / m² (depending on tile format and joint width) Consumption calculator Color gray, white, silver gray, Manhattan, cement gray, jasmine, bahama, silk gray, hazelnuts, sand gray, camel, sanitary gray, walnut brown, bali, basalt, anthracite, black

-for indoor and outdoor use for walls and floors very flexible, abrasion resistant and pearlescent for natural stone, porcelain stoneware and more for joints 1 to 6 mm wide (national regulations must be observed) Powdery, food safe, water and frost resistant, very flexible, high strength and elastic pearlescent grout. Simple insertion into the joint and uniform fast tightening of the sealant, especially with a non-absorbent gasket material, allows quick and easy processing and immediate follow-up work. In addition, the low water absorption of the high strength joint mortar reliably prevents staining. For filling joints 1 to 6 mm wide on wall and floor surfaces, both indoors and outdoors. For water- and dirt-repellent grouting of ceramic tiles, slabs, mosaics, as well as natural stone and porcelain stoneware. Suitable for underfloor heating in residential areas, as well as for damp rooms, terraces and balconies.

- for indoor and outdoor use for walls and floors high flexibility, abrasion resistance and pearl effect for natural stone, fine porcelain stoneware and much more for joints 1 to 6 mm wide (national specifications must be observed and observed) Powdered , food safe, water and frost resistant, super smooth, high strength and flexible pearl effect grout. Simple processing and further processing are possible without delay due to the simple application of filler in the joint and the same fast application, especially for non-absorbent material. In addition, the low water consumption of the highly abrasive grout reliably prevents staining. For grouting joints 1 to 6 mm wide for indoor and outdoor wall and floor surfaces. For water- and dirt-repellent grouting of ceramic tiles, boards, mosaics, as well as natural stone and fine porcelain stoneware. Suitable for underfloor heating systems in residential areas, as well as for wet rooms, terraces and balconies. Consumption 0.2 - 0.9 kg / m² (depending on tile format and joint width) Consumption calculator Color gray, white, silver gray, Manhattan, cement gray, jasmine, bahama, silk gray, hazelnuts, sand gray, camel, sanitary gray, walnut brown, bali, basalt, anthracite, black

- hardening for grouting hemisch belastbar flexible wasserabweisend Plastic dispersion to increase the elasticity, water-repellent and chemical resistance of Murexin grout. Hardener for Murexin adhesives with increased static or thermal loads for better stress dissipation or absorption, for example, when laying on warm floors, terraces, balconies, facades, etc., as well as for use in swimming pools, thermal baths, bathtubs with sea ​​water and brine, large kitchens, car washes, terraces, as well as industrial and commercial premises. Consumption depending on the water consumption of the respective grout

- Reduces excess teeth during placement saves time no additional tools required easy application Plastic installation aid consisting of a tension cover and a threaded protrusion for placing material up to 12 mm thick (tension coating aid BIS 12, black) or 20 mm (stretch coating aid BIS 20, gray) - The threaded insert (FB 17 1.7 mm wide or FB 10 1.0 mm wide) can be used regardless of height. For delicate ceramics or natural stone, it is recommended to use a transparent protective underlay SU 01 under a suitable stretch coating.

- Reduces excess teeth during placement saves time no additional tools required easy application Plastic installation aid consisting of a tension cover and a threaded protrusion for placing material up to 12 mm thick (tension coating aid BIS 12, black) or 20 mm (stretch coating aid BIS 20, gray) - The threaded insert (FB 17 1.7 mm wide or FB 10 1.0 mm wide) can be used regardless of height. For delicate ceramics or natural stone, it is recommended to use a transparent protective underlay SU 01 under a suitable stretch coating.

- Reduces excess teeth during placement saves time no additional tools required easy application Plastic installation aid consisting of a tension cover and a threaded protrusion for placing material up to 12 mm thick (tension coating aid BIS 12, black) or 20 mm (stretch coating aid BIS 20, gray) - The threaded insert (FB 17 1.7 mm wide or FB 10 1.0 mm wide) can be used regardless of height. For delicate ceramics or natural stone, it is recommended to use a transparent protective underlay SU 01 under a suitable stretch coating.

- Reduces excess teeth during placement saves time no additional tools required easy application Plastic installation aid consisting of a tension cover and a threaded protrusion for placing material up to 12 mm thick (tension coating aid BIS 12, black) or 20 mm (stretch coating aid BIS 20, gray) - The threaded insert (FB 17 1.7 mm wide or FB 10 1.0 mm wide) can be used regardless of height. For delicate ceramics or natural stone, it is recommended to use a transparent protective underlay SU 01 under a suitable stretch coating.

combination bonding with various materials permanently elastic with extremely high adhesive strength very good adhesion without primer extremely high initial adhesion High quality elastic one-component adhesive based on the latest developments in MSP technology. The product is free from water, solvent, silicone, isocyanate and halogen, recoatable and UV and weather resistant. In addition, it is permanently elastic and prevents the transfer of unfavorable forces to the substrate. A universally applicable durable adhesive and sealant for indoor and outdoor use. Color white

seal + adhesion with one product very low emissions - EC1-PLUS waterproof and open to vapor diffusion decoupling for problem substrates New type of hydraulic installation, waterproof but still open to vapor diffusion, cementitious, flexible, one-component sealable and adhesive solution. Indoor and outdoor spaces for creating seamless and seamless seals in wall and floor coverings directly under ceramic tiles and boards (according to EN 14891 and ÖNORM B 3407 W1 - W6), as well as for bonding ceramic floor coverings for high thermal or mechanical stress. Consumption as a seal: about 1.5 kg / m² per mm as an adhesive: about 3 kg / m² depending on the tile format

high flexibility (S2) high stability with wall-mounted tension reduction even for problem substrates suitable for all tile types and sizes One-component, powdery, high-temperature, frost-free, hydraulically set, food-safe adhesive mortar for flexible adhesion. For laying ceramic wall and floor tiles indoors and outdoors, panels, fine ceramics, natural stones that are not sensitive to moisture. Particularly suitable for the installation of highly demanding ceramic tiles. Consumption depending on the teeth: approx. 1.6 kg / m² with 6 mm teeth, approx. 2.2 kg / m² with 8 mm teeth, approx. 2.9 kg / m² with 10 mm notched teeth Color white

near temperature independent (from + 2 ° C) bonding of crystalline water fast hardening and high flexibility early adhesion strength White, almost temperature independent, powdery, crystalline water-binding, water- and frost-resistant, high-temperature, hydraulically set flexible adhesive solution for laying up to 20 mm thick adhesive layer. No show for lightweight materials. For laying ceramic wall and floor tiles indoors and outdoors, thin porcelain stoneware, for increased thermal or static loads in a layer up to an adhesive thickness of 4 to 20 mm. Consumption with teeth: approx. 1.8 kg / m² with teeth 6 mm, approx. 2.5 kg / m² with teeth 8 mm, approx. 3.2 kg / m² with teeth 10 mm Color white