Manual sealer for PVC / PO bags TPTs AP 370N - 8690

FLOWMATE Food Grade Pump Water Pump Diaphragm Pump KDP-14 series 12V/24V DC Pump Electric Pump Permanent Magnet Brush/brushless Motor Assemblied Open Flow 1-2LPM Designed for General Purpose Water Dispenser Coffee Machine Auto Vending Machine Portable Electric Sprayer etc.   Product label: FLOWMATE, KDP-14, Pump, Water Pump, Diaphragm Pump, Membrane Pump, Mini Pump, Micro Pump, DC Pump, DC Water Pump, DC Diaphragm Pump, DC Membrane Pump, Mini Water Pump, Mini Diaphragm Pump, Mini Membrane Pump, Micro Water Pump, Micro Diaphragm Pump, Micro Membrane Pump, Electric Pump, Electric Water Pump, Electric Diaphragm Pump, Electric Membrane Pump, Brush Pump, Brushless Pump, Food Grade Pump, Water Dispenser Pump, Water System Pump, Coffee Machine Pump, Vending Machine Pump, Ice Maker Pump, Agriculture pump, Electric Sprayer Pump,  Self-priming pump, micro self-priming pump, mini self-priming pump, self-priming water pump, self-priming diaphragm pump   Diaphragm Pumps are used extensively in many industries and can handle a very wide variety of liquids. Diaphragm Pumps are in the category of "positive displacement" pumps because their flowrates do not vary much with the discharge "head" (or pressure) the pump is working against (for a given pump speed). Diaphragm Pumps can transfer liquids with low, medium or high viscosities and also liquids with a large solids content. They can also handle many aggressive chemicals such as acids because they can be constructed with a wide variety of body materials and diaphragms   Features 1. Food grade2. Small size and easy installation3. Low noise with smooth running4. Self-priming with dry suction 1-2.5 meters5. Dry run without damage6. Long life permanent magnet DC brush motor7. Varible hosing port can be customized 8. Explosion proof design for flammable refrigerants9. Handling cold water and hot water 0-100℃   Applications 1. Water dispenser 2. Coffee machine 3. Vending machine 4. Ice maker 5. Tea table water dispensing 6. Integrated stove 7. Medical equipment 8. Chemical instrument 9. Electric sprayer 10. Wine taker 11. Water purifier/filtration   Specifications Model Hosing Port Rated Volts (VDC) Rated Amps (A) Open Flow (L/min) Noise 30CM (dB) Dry Suction (m) Head (m) Output Pressure (MPA) Weight (KG) Duty Cycle KDP-14 Φ1/4"(6.5mm) OD Pipe 12 0.2 0.8±0.2 43 1.0/1.8 2 0.08 (10PSI) 0.25 Intermittent 12/24 0.3/0.15 1.0± 0.2 45 1.2/2.0 5 0.15 (20PSI) 0.25 Intermittent 12/24 0.4/0.2 1.2± 0.2 48 1.5/2.5 7 0.2 (30PSI) 0.25 Intermittent 12/24 0.5/0.3 1.4± 0.2 50 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.6/0.35 1.6± 0.2 52 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.7/0.4 1.8± 0.2 54 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.8/0.5 2.0± 0.2 56 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 1.0/0.6 2.3± 0.3 58 1.5 10 0.3 (45PSI) 0.25 Intermittent Tested with clean water at 25℃。   Wetted Parts Material Construction Pump housing - PP/PP+20%GF Pump covers - PP/PP+20%GF Diaphragms - Silicone/EPDM/VITON/Santoprene TPV Check valve sealings - Silicone/EPDM/VITON   Performance Curve   Dimension Drawings  

SOVOFLO Food Grade Pump Water Pump Diaphragm Pump KDP-14B series 12V/24V DC Pump Electric Pump Permanent Magnet Brush/brushless Motor Assemblied Open Flow 1-2LPM Designed for General Purpose: Water Dispenser Coffee Machine Auto Vending Machine Portable Electric Sprayer etc.   Product label: FLOWMATE, KDP-14B, Pump, Water Pump, Diaphragm Pump, Membrane Pump, Mini Pump, Micro Pump, DC Pump, DC Water Pump, DC Diaphragm Pump, DC Membrane Pump, Mini Water Pump, Mini Diaphragm Pump, Mini Membrane Pump, Micro Water Pump, Micro Diaphragm Pump, Micro Membrane Pump, Electric Pump, Electric Water Pump, Electric Diaphragm Pump, Electric Membrane Pump, Brush Pump, Brushless Pump, Food Grade Pump, Water Dispenser Pump, Water System Pump, Coffee Machine Pump, Vending Machine Pump, Ice Maker Pump, Agriculture pump, Electric Sprayer Pump,  Self-priming pump, micro self-priming pump, mini self-priming pump, self-priming water pump, self-priming diaphragm pump   Diaphragm Pumps are used extensively in many industries and can handle a very wide variety of liquids. Diaphragm Pumps are in the category of "positive displacement" pumps because their flowrates do not vary much with the discharge "head" (or pressure) the pump is working against (for a given pump speed). Diaphragm Pumps can transfer liquids with low, medium or high viscosities and also liquids with a large solids content. They can also handle many aggressive chemicals such as acids because they can be constructed with a wide variety of body materials and diaphragms   Features 1. Food grade2. Small size and easy installation3. Low noise with smooth running4. Self-priming with dry suction 1-2.5 meters5. Dry run without damage6. Long life permanent magnet DC brush motor7. Varible hosing port can be customized 8. Handling cold water and hot water 0-100℃   Applications 1. Water dispenser 2. Coffee machine 3. Vending machine 4. Ice maker 5. Tea table water dispensing 6. Integrated stove 7. Medical equipment 8. Chemical instrument 9. Electric sprayer 10. Wine taker 11. Water purifier/filtration   Specifications Model Hosing Port Rated Volts (VDC) Rated Amps (A) Open Flow (L/min) Noise 30CM (dB) Dry Suction (m) Head (m) Output Pressure (MPA) Weight (KG) Duty Cycle KDP-14B Φ1/4"(6.5mm) OD Pipe 12 0.2 0.8±0.2 43 1.0/1.8 2 0.08 (10PSI) 0.25 Intermittent 12/24 0.3/0.15 1.0± 0.2 45 1.2/2.0 5 0.15 (20PSI) 0.25 Intermittent 12/24 0.4/0.2 1.2± 0.2 48 1.5/2.5 7 0.2 (30PSI) 0.25 Intermittent 12/24 0.5/0.3 1.4± 0.2 50 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.6/0.35 1.6± 0.2 52 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.7/0.4 1.8± 0.2 54 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.8/0.5 2.0± 0.2 56 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 1.0/0.6 2.3± 0.3 58 1.5 10 0.3 (45PSI) 0.25 Intermittent Tested with clean water at 25℃。   Wetted Parts Material Construction Pump housing - PP/PP+20%GF Pump covers - PP/PP+20%GF Diaphragms - Silicone/EPDM/VITON/Santoprene TPV Check valve sealings - Silicone/EPDM/VITON   Performance Curve   Dimension Drawings

The FLO machine is a heat-shrinkable machine with side seam formation, available at the warehouse in Nizhny Novgorod. It is universal, flexible in operation - it allows you to quickly change from size to size. The machine is automatic, setting is carried out from the control panel. Suitable for both small and medium-sized products and goods. Rearranges the film cut lengthwise. Focused on saving film. Works with polyolefin and polyethylene films. Technical characteristics of the packaging machine Manufacturer - DM Pack (Italy) Packing speed - up to 40 packages per minute Types of film: polyolefin, polyethylene Sealing size - 500x650 mm Maximum product width - 420 mm Maximum product length - 600 mm Maximum product height - up to 200 mm Width films – 650 mm Features of the FLO packaging machine L-shaped sealing bar. The block is lowered in captivity when sealed with the entire surface at the same time (there is no “scissors” effect). The sealing bar is only 10 mm wide and ensures high seam quality and film savings. Sliding doors. Seam centering system in the machine base. Easy cleaning and maintenance, easy change of conveyors. Perforators for piercing film. Touch panel with convenient control program. Roll-out cart for film roll. Sign up for test packaging of your products via messages or by phone number. Automate your packaging workshop today!

Offer: Strapping table TP-201 is a reliable semi-automatic strapping machine. • Provides lock-free fastening of polypropylene tape • No need to reconfigure the table when changing the size of the packaged object • Particularly suitable for packing packages, boxes, sacks that are impossible or difficult to tie using hand tools Operating principle: the tape is thrown out to a given length; the item to be packed is placed on the table; the operator manually circles the packaged item with the free end of the tape and inserts it into the receiving hole in the table; The device automatically tensions, welds and cuts the tape. Technical characteristics • Strapping speed 2.5 sec/turn. • Tape width 6…15.5 mm • Mechanical tape tension force control • Tape tension force max 45 kg • Package size: min 120 x 30 mm, max unlimited • Supply voltage 220 V (50 Hz) • Power 200 W • Internal tape reel diameter 200/230/280 mm • Weight 100 kg • Overall dimensions 910 x 582 x 785 mm. Country of origin: Taiwan PS. P/P tape (strapping) strapping 12*0.8mm. blue color, length 1.8 km. It welds well together even at low temperatures, Price = 150,000 rubles, indicated with VAT and loading from a warehouse in Vladivostok. I will be happy to answer your questions. We will assist in shipping to your warehouse. R/S Offer: soldering element for soldering strapping tape to “TR-201”, price = 19,200 rub. We hope for your interest in our offer, we will be very glad to cooperate.

Automatic quantitative packing scale is designed for quantitative packing, which is divided into double bucket packing scale and single bucket packing scale. Double bucket packing scale adopts integrated design and has correct height, compact structure, efficient energy saving, novel appearance, easy installation and convenient maintenance. The quantitative accuracy of the system is two thousandths. Performance Features: Packing speed is fast. High measurement accuracy. High reliability: the main components of the control system use imported products, and the instrument uses Japanese technology; The mechanical structure is reasonable: the system is maintenance-free and the material is easily adaptable. Good after-sales service: stable technical service staff; 24/7 after-sales service hotline; provide enough spare parts and timely and perfect technical services. The material of the contact part is anti-corrosion material. Working principle The main motor adopts different feed speed: fast, medium, slow and special feed agitate the structure. Advanced digital frequency conversion control technology; sample processing technology; anti-jamming technology; implementation of automatic compensation and correction.

An additional feeding hopper and dosing band can be integrated into the system. It can be easily programmed with the help of the digital touch screen. It is easy to operate and can be used by anyone. Optionally, an automatic sack sewing unit can be added. You can enter different weighing programs. In 25 kg packaging, 150-200 packages can be made per hour on average. The system can be shipped disassembled. All fasteners are bolted and can be easily fixed. Equipments are produced as corrosion resistant epoxy coating and painted. Stainless chrome material is used in the product contact areas for food products. Equipment and design can be made according to your needs. Organic or chemical Fertilizer Cereal Products Chemical Powders Construction chemicals Food products Powder-Pelet-Granul All Products

Film cutter cold table Pruner It is used for winding stretch film of various goods. The cutter has holes for fastening to the wall, as well as a device for holding it on a horizontal surface Used with standard hand stretch rollers 50 cm Suitable for industrial and home use Characteristics of the Pruner cold table Material - painted steel Length, cm - 64 Depth, cm - 22 Height, cm - 14 Sleeve diameter, mm 50-76 Application - product packaging

A roller press is equipment that is designed for cutting out any designs of corrugated packaging using flat die-cutting molds for small and medium runs. The punching mold with the workpiece moves from one table of the machine through the shafts to another table, where the workpiece is removed and a new one is placed. Productivity: from 250 to 550 rolls per hour, depending on the size of the workpiece. The cutting shafts of the machine are made of high-quality steel with a uniform polyurethane coating, which can significantly increase their wear resistance. The average service life of the shafts is at least 6 years with a daily load of the machine in 1 work shift.

EXS-303 (2PACK) is a premium semi-automatic strapping machine. Equipped with automatic electronic tension adjustment. The extremely precise electronic adjustment of the strap tension protects the packaged product from damage and guarantees optimally fitting strapping. Robust, reliable and low maintenance thanks to direct drive motor without chain or belt Surprisingly quiet. Equipped with a standard cooling delay. Economical motor, starts only when tape is inserted. EXS-303 is equipped with four swivel wheels with brakes

We offer Tea/bulk packaging equipment line Complete set of line: Vertical type range compactor PPK-200 (Propack korea LTD) Filling conveyor (conveyor) 042-16L (Kamal) Four head filling equipment ACZ-A4 (Melchars LTD) Production Multi: Korea, Sri Lanka and Taiwan

Where is MECHANICAL SEAL Used? The parts that provide sealing between two machine parts, one of which is movable and the other fixed, are called shaft seal. It is generally used in places such as pumps, taps, shaft bearings. Where are ROTARY HEADS Used? It is used to transfer fluids such as hot water, hot oil, steam etc. to a fixed axis over the rotating drum.