WENTA THERMAL OIL BOILERS - 49029

Heating element for oil of the highest quality. Technical characteristics: Heating element length (length of the metal shell of the heating element when unfolded) up to 6000 mm. Heating element tube diameter: 18; 16; 13; 10; 8.5; 8.0; 7.4; 6.5 mm (on request we can produce other diameters that differ from GOST) Shape and configuration of the heating element: any, specifying the dimensions or according to drawings and sketches. Power: Calculated taking into account the operating parameters of the heating element depending on diameter, voltage, length. Working medium: solution of alkalis and acids; air and other gases and mixtures of gases; Fats, oils and other viscous liquids; alkali; Low-melting Metals; Aggressive solutions of alkalis and acids; Voltage: On request 12; 24; 36; 42; 48; 60; 127; 220; 380. Options or material for construction: Stainless steel, carbon steel, finned, titanium, PTFE sheathed, Teflon coated, seamless stainless steel. Contact group options for connection: Flat pin contact, welded insulated wire with and without a sealed rubber coupling, threaded rod and other options on request. Mounting strips: If necessary, complete with various mounting strips of different sizes and shapes with and without threaded holes.

Heating element blocks (TENB) are mainly used for heating liquids and oil and are used in water heaters, steam generators, boilers and other industrial and domestic installations. The design of the heating element block consists of one or more electric heaters, hermetically sealed on a common flange. Block heating elements on a threaded flange are available in stock! Material of heating element tubes: stainless steel, carbon steel, brass Diameter of heating element tubes: 6.5; 8.5; 10.0; 13.0 and others as agreed Power: any as agreed Voltage: 12, 24, 36, 48, 60, 127, 220, 380 Additionally: Tube for the sensor, protective cap, spacer rings. Flange material: Stainless steel, carbon steel, brass Types of flanges: Threaded, stamped, machined.

Where is MECHANICAL SEAL Used? The parts that provide sealing between two machine parts, one of which is movable and the other fixed, are called shaft seal. It is generally used in places such as pumps, taps, shaft bearings. Where are ROTARY HEADS Used? It is used to transfer fluids such as hot water, hot oil, steam etc. to a fixed axis over the rotating drum.

The heating system of each house is a complex individual design, the installation of which requires a preparatory project that fully reflects the technical characteristics of the system, the most effective methods of its installation, energy consumption, ease of use and much more. Installation of pipes for the heating system, boilers, radiators and other elements of the network, carried out by qualified specialists, all this is a laborious process, which consists of several stages: - creation of a heating system plan; - preparation of premises for the installation of all network components; - installation of heating equipment. Features of installing heating in a private house At the first stage, you should decide on the choice of the type of fuel that will power the future engineering network. Nowadays, the main types of fuel for a private house are liquefied and natural gas, electricity, coal, firewood, and oil products. Next, you need to decide on the question directly about the type of heating of a country house: it can be water, electric or air. So the scheme of the utility network can be either one-pipe or two-pipe, with lower and upper piping, vertical or horizontal. A well-designed calculation is an efficient, convenient and reliable operation of the heating system.

We produce burners: gas, diesel, combined. Power range from 320 kW. up to 10.5 MW. Power regulation: gas - progressive, diesel - three-stage or modulating gas train - DN80; gas valve block - Dungs DMV-D5080; burner control - Siemens LFL1.322; servo - Siemens SQM10.15502; flame sensor - QRA2; gas filter - GF80; gas pressure regulator - Dungs FRS 5080; gas pressure sensor - Dungs GW50A5; tightness control unit - VPM-VC; fuel pump - Suntec Т2С; electric motor power - 15 kW.

• Hot oil systems can easily reach temperatures higher than with heat carrier fluids such as water-steam. • The temperature can achieve 300°C at atmospheric pressure. • Thermal conductivity coefficients of oils are higher than of other fluids. • Thermal oil used as heat carrier in the system does not leave precipitants in the installation. • No corrosive effect. • Thermal oils do not require conditioning as in the steam systems.. • There is no risk of freezing. • It is highly efficient. Capacity: 100,000-10,000,000 kcal/h Temperature: Up to 300 ° C heat are PLC controlled systems.

TECHNICAL SPECIFICATIONS   Up to 300 ºС temperature can be obtained at the normal air pressure. The heat transfer fluid does not leave dirty in the pipes and it prevents corrossion There is no risc of freezing of the heat transfer fluid. It provides high temperatures without high pressure in the systems where the high temperatures are needed.   APPLICATION AREAS    Chemistry industry  Textile industry  Painting industry  Packaging ang printing industry  Food industry  Wood industry  Paper industry  Oil recycling industry  Petrochemistry industry  Leather industry  Requirement of steam and hot water.   Note: The oil boilers optionally can be with expansion vessels, thermal oil tank, burner,circulation pump or pums, control panels and equipments.