ТРАНСМЕТАЛЛ

Hoffman HFS-1800 cutting and spreading complex (1800x8000 mm) HFS series spreading complexes are the equipment necessary in every cutting shop. These complexes can be mounted on the HS-1 cutting table, produced in a modular system that makes it possible to easily and quickly expand the working surface. Thanks to this modern design, you can easily lay the material, and then cut it using circular or vertical cutting knives. The solid construction of metal profiles gives the device not only strength, but also guarantees easy installation and stability during operation. The HFS series spreading machines are so easy to operate that only one operator can work on them. There is a roll on a strong metal shaft and moves on a special carriage along runners mounted on the table structure. With the help of an automatic cut-off ruler, a layer of material is cut off, and a clamping bar installed on the table holds the material. Height is manually adjustable. HFS flooring systems meet the highest safety requirements - special stops prevent the carriage from falling off the table. For multi-module tables HS-1, you can additionally use a suspension system that makes it easier to work with wires leading to the cut-off fence. Maximum roll diameter: 70 cm / Maximum deck height: 20 cm Maximum deck width 1800/2000 Cut-off ruler motor power : 0.12 kW Cutting speed: 0.7 - 1.3 m / sec / Maximum coil weight: 100 kg

Hoffman HFS-1800 cutting and spreading complex (1800x3000 mm) HFS series spreading complexes are the equipment necessary in every cutting shop. These complexes can be mounted on the HS-1 cutting table, produced in a modular system that makes it possible to easily and quickly expand the working surface. Thanks to this modern design, you can easily lay the material, and then cut it using circular or vertical cutting knives. The solid construction of metal profiles gives the device not only strength, but also guarantees easy installation and stability during operation. The HFS series spreading machines are so easy to operate that only one operator can work on them. There is a roll on a strong metal shaft and moves on a special carriage along runners mounted on the table structure. With the help of an automatic cut-off ruler, a layer of material is cut off, and a clamping bar installed on the table holds the material. Height is manually adjustable. HFS flooring systems meet the highest safety requirements - special stops prevent the carriage from falling off the table. For multi-module tables HS-1, you can additionally use a suspension system that makes it easier to work with wires leading to the cut-off fence. Maximum roll diameter: 70 cm / Maximum deck height: 20 cm Maximum deck width 1800/2000 Cut-off ruler motor power : 0.12 kW Cutting speed: 0.7 - 1.3 m / sec / Maximum coil weight: 100 kg

Manual machine for laying knitted bundles. Uniform and fast flooring with one screed, fabric tension adjustment. Can be used on any cutting table.

Semi-automatic machine for laying knitted and woven fabrics of various types. & lt;! - / announce end - & gt; - Consistent and fast flooring with one flooring machine. - Material edge alignment system. - Zigzag laying function. - Fabric tension adjustment system. - Electronic clutch system. - Automatically adjustable height of the flooring depending on the thickness of the material. - Possibility of laying from a pack (and a roll) by installing an additional device.

- Designed for all types of knitted and textile materials. - PLC controller, touchscreen display with an intuitive interface. - Conveyor system of material feeding, synchronized with the speed of the machine. - Tension control system - Automatic leveling of the material edge during laying. - Easy access to all parameters from the touch screen. Ability to save / load different sets of parameters for different types of materials. - Automatic stop when the required number of layers is reached. - Automatic stop at the end of the bale / bale. - Various settings for the speed of movement when laying. - Automatic front lift system based on material thickness. - Zig-zag ("face-to-face") layering - Swivel carriage allowing face-to-face layering on the pile - Increased bale weight (up to 300 kg) - High performance and quiet operation. - Operator platform. - Direct drive on four wheels. - Automatic stop using safety sensors. - Low power consumption.

Automatic machine for laying knitted and woven fabrics of various types. - Designed for all types of knitted and textile materials. - PLC controller, touchscreen display with an intuitive interface. - Conveyor system for feeding material, synchronized with the speed of the machine. - Tension Control System - Automatic material edge alignment during application. - Easy access to all parameters from the touch screen. Ability to save / load different sets of parameters for different types of materials. - Automatic stop when the required number of layers is reached. - Automatic stop at the end of the bale / bale. - Various settings for the speed of movement when laying. - Automatic front lifting system based on material thickness parameters. - Possibility of "zig-zag" ("face to face") laying - Possibility of "stocking" laying due to the installation of an additional device - High performance and quiet operation. - Operator platform. - Direct four-wheel drive. - Automatic stop using safety sensors. - Low power consumption.

Groz-Beckert DPx5 (134 R) No. 60/8 Model: DPx5 (134R; 135х5; 135х7; SY1955) No. 60/8 Short description: Universal needle designed for lockstitch machines (thick flask) . The normal ball point is the standard shape. No point designation or “R” designation is allowed. Application: lightweight fabric, thin coated fabrics, multi-layer fabrics with lightweight synthetic material, ready-to-wear fabrication. Needle length from the beginning of the eyelet to the base: 33.9 mm. Flask thickness: 2.0 mm. The price is indicated for 1 piece Quantity in a package: 10 pieces Manufacturer: Groz-Beckert (Germany).

Groz-Beckert 134 MR 2.5 (no. 80) Model: 134 MR 2.5 (no. 80) Brief description: Special shank and notch geometry gives the needle maximum stability when sewing in different directions. Normal ball point is the standard form. The absence of the designation of the point or the designation "R" is allowed. Application: multidirectional seams, stitches. Quantity per pack: 10 pcs. Manufacturer: Groz-Beckert (Germany).

Groz-Beckert DPx5LL (134LL CR) No. 100/116 Model: DPx5LL CR (134LL CR) No. 100/116 Short description: Universal needle designed for lockstitch machines (thick flask). Cutting point LL cuts through the skin at an angle of 45 degrees to the left to the transport device. CL - Notch on the needle point to the left. Application: for making straight seams with closed punctures. For any kind of leather. Amount per pack: 10 pcs. Manufacturer: Groz-Beckert (Germany).

Groz-Beckert DPx5LL (134LL CR) No. 80/12 Model: DPx5LL CR (134LL CR) No. 80/12 Short description: Universal needle designed for lockstitch machines (thick flask). Cutting point LL cuts through the skin at an angle of 45 degrees to the left to the transport device. CL - Notch on the needle point to the left. Application: for making straight seams with closed punctures. For any kind of leather. Amount per pack: 10 pcs. Manufacturer: Groz-Beckert (Germany).

Groz-Beckert DPx5 FG (134 FG) No. 140/22 Model: DPx5 FG / SUK (134FG) No. 140/22 Brief description: Universal needle for lockstitch machines (thick flask). < br> Small ball point FG Applications: T-shirts, underwear, thin sweaters. Needle length from the beginning of the eyelet to the base: 33.9 mm. Bulb thickness: 2.0 mm. Needle thickness (needle diameter): 0.9 mm. Package quantity: 10 pcs. Manufacturer: Groz-Beckert (Germany).

Groz-Beckert DPx5 RS / SPI (134 RS) No. 80/12 Model: DPx5 RS / SPI (134 RS) No. 80/12 Brief description: Universal needle for lockstitch machines (thick flask ). Sharp round point RS Application: for very straight quilted seams on fine fabrics. Needle length from the beginning of the eyelet to the base: 33.9 mm. Bulb thickness: 2.0 mm . Quantity per pack: 10 pcs. Manufacturer: Groz-Beckert (Germany).