Buy Autonomous digital pressure gauge-thermometer with moisture meter 10 pcs ACM-6G-30. We are considering analogues. We ask you to consider the possibility of production indicating the cost (excluding VAT) and the terms of shipment. Self-pickup Autonomous digital pressure gauge-thermometer with deep moisture meter is designed for recording pressure and temperature during gas-dynamic studies during the operation of gas wells. 2.1. Technical characteristics of the Product • Pressure measurement range: 0-400 kgf/cm2 • Absolute measurement error: 0.6 kgf/cm2 • Pressure sensitivity: 0.002 - 0.023 kgf/cm2. (depending on the operating mode) • Temperature measurement range, not less: 0...+120 °C (depending on version) • Permissible absolute measurement error: ±1 °C • Moisture meter sensor measurement range: 0...60% \ 0...1 c.u. • Absolute measurement error of the moisture meter: 10% \ 0.1 c.u. • Device memory capacity: 8 MB (2,162,688 measurement points) • Memory filling time: 250 days (polling cycle 10 sec) • Device power supply: Lithium battery 3.6 V • Minimum supply voltage: 3 V • Average service life of the device, not less : 5 years 2.2. Software • Turning the device on and off into recording mode using a computer • Reading information from the device into a PC in any interval of operating time • Viewing real values of pressure, temperature and voltage of power sources to check the device • Setting a polling cycle from 0.023 to 99 sec • Viewing received data on the computer screen in numerical and graphical form • Output the received data in the selected range to a printer in numerical and graphical form • Saving the received data in *.txt, *.las, *.xls (Excel) formats • Communication with a computer USB2. 0 • Reading time of the entire memory (8 MB) of the device is no more than 2 minutes • Software switching of the device into one of three modes: high-speed, economical and precision 2.3. Overall dimensions • Length: from 300 mm • Diameter: 20-32 mm • Connecting thread: M12x1.75; M22x1.5 2.4. Delivery terms 2.4.1. The goods must be supplied with a certificate or other document certifying the origin of the goods. Appropriate packaging to prevent damage to the product and provide protection against corrosion. 2.4.2. The product must be protected from contamination of internal surfaces with plastic plugs. 2.5. Warranty for the supplied Goods 2.5.1. The Supplier must provide a guarantee against defects in the supplied Goods for a period of one year from the date of their acceptance by the Customer under the acceptance certificate. 2.5.2. The product must be new, free from corrosion (rust) and defects, and comply with the Customer’s technical specifications. 2.5.3. The supplied Goods must be released by the manufacturer no earlier than 2022. (Translated from Russian)