Wall-mounted gas turbocharged single-circuit boiler with a capacity of 36 kW. Forced removal of combustion products. Ease of installation and ease of maintenance Gas; Remote control; Cascade Description. Gas wall-mounted heating boiler. The power of the device is regulated by a modulating burner. Forced removal of combustion products through a certified chimney / air duct system. Installation possibilities. Heating and water heating (in combination with a DHW cylinder). Possibility of installation in a residential area. Suitable for reconstructed and under construction residential buildings and apartments, where it is impossible to install a chimney of a conventional design. Minimum side clearance required is 10mm, all units are accessible from the front. Possibility of combination with different types of water heaters type VIH for domestic hot water preparation. Possibility of use in dusty rooms. Equipment: LCD display with backlight, push-button control. Internal software for status monitoring, parameter setting and troubleshooting. Built-in circulation pump with automatic stage switching, closed expansion tank, automatic air vent, automatic adjustable bypass valve, motorized safety valve "Intelligent" pressure control in the heating system. Copper primary heat exchanger with average efficiency >=91%. Chrome-nickel steel burner. Built-in DHW cylinder control. Permanent frost protection. Protection against jamming of the pump and three-way valve. Switch "WINTER / SUMMER" Possibility of setting to partial power in heating mode. Electronic ignition and control of all functions. Connecting kit included in delivery. Built-in switching module for eBus interface Turbocharged boiler. Depending on the design solution of the boiler room, it allows organizing an air supply and smoke exhaust system through the wall.