Maintenance kit LIUGONG 855H 500-2000 hours - 83824

Dear wholesalers, we cooperate with the Chinese factory, and can provide you with good replicas of spare parts for Toyota of all brands at huge discounts, delivery to any city

Denso Wiper Blades are the first hybrid windshield wipers on the market. DENSO is part of the TOYOTA group of companies and supplies wipers for new cars of this brand, as well as LEXUS, BMW, Range Rover, Jeep, Honda, Mazda, Suzuki, KIA, Hyundai, Toyota, Lada, . Denso Wiper Blades are manufactured using high-quality Japanese NWB rubber bands, have the highest quality and long service life, which is confirmed by feedback from our customers. The hybrid design combines the advantages of frameless and framed windshield wipers: high aerodynamics and good fit on heavily curved glass. Denso hybrid windshield wiper blade set. The blade is not equipped with an additional adapter. This is a curved spring aerodynamic frame that presses the blade to the windshield. The graphite-coated rubber increases service life and perfectly cleans the windshield. Some of the best aerodynamics and noise levels among brushes. The ease of installation will pleasantly surprise any motorist. Suitable for vehicles with HOOK mounting. Attractive hybrid brush design with a slim, aerodynamic shape. Truly Japanese quality which has been chosen by numerous car manufacturers as ORIGINAL windshield wipers.

  Spare parts for special equipment from leading manufacturers

Meadow Mower

"A&S Construction Machinery Co., Ltd. supplies all types of Oil pumps.   All the brands of Oil pumps we can provide: CAT Oil pumps, KOMATSU Oil pumps, JOHN DEERE Oil pumps, SANY Oil pumps, XCMG Oil pumps, VOLVO Oil pumps, HITACHI Oil pumps, SUMITOMO Oil pumps, LIEBHERR Oil pumps, DOOSAN Oil pumps, CASE Oil pumps, BOBCAT Oil pumps, KUBOTA Oil pumps, YANMAR Oil pumps, HYUNDAI Oil pumps, DAEWOO Oil pumps, etc.   For other parts of the brands above we can also provide cylinder liners, crankshafts, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc.   Contact Us  A&S Construction Machinery Co., Ltd.  

Overview The LTM9013CY-AA#PBF redefines the concept of signal reception with its state-of-the-art technology and integrated approach. By combining essential functions into a single, compact module, this receiver simplifies system design and integration, saving valuable time and resources. With its wideband capabilities and exceptional signal processing capabilities, the LTM9013CY-AA#PBF offers unparalleled performance and versatility for a wide range of applications     Features Precision Phase Lock Loop Fast Acquisition Time Dual Voltage Supply     Application High-speed data processing Signal conditioning circuits Low noise amplifiers  

GENERAL DESCRIPTION The XCL225/XCL226 series are 18V operation synchronous step-down DC/DC converter ICs with a built-in high-side / low-side driver transistor. The XCL225/XCL226 series has operating voltage range of 3.0V～18.0V and it can support 500mA as an output current with high-efficiency. Compatible with Low ESR capacitors such as ceramic capacitors for the load capacitor (CL).   0.75V reference voltage source is incorporated in the IC, and the output voltage can be set to a value from 1.0V to 15.0V using external resistors (RFB1, RFB2).   1.2MHz can be selected for the switching frequency. In PWM/PFM automatic switchover control, IC can change the control method between PWM and PFM based on the output current requirement and as a result IC can achieve high efficiency over the full load range.   XCL225/XCL226 has a fixed internal soft start time which is 1.0ms (TYP.), additionally the time can be extended by using an external resistor and capacitor.   FEATURES Input Voltage Range : 3 ~ 18V（Absolute Max 20V） FB Voltage : 0.75V±1.5% Oscillation Frequency : 1.2MHz Output Current : 500mA Control Methods : PWM control PWM/PFM Automatic Efficiency 1mA Soft-start Time : Adjustable by RC Protection Circuits : Over Current Protection Integral Latch Method (XCL225A/XCL226A) Automatic Recovery (XCL225B/XCL226B) Thermal Shutdown Output Capacitor : Ceramic Capacitor Operating temperature range -40℃ ~ 105℃ Package DFN3030-10B Environmentally Friendly : EU RoHS Compliant, Pb Free   APPLICATIONS ● Hot water supply system ● Recorders, Camcorders ● Refrigerators, Air-conditioners ● Low Power Systems

XC9220A093MR-G TOREX SEMICONDUCTOR LTD   GENERAL DESCRIPTION The XC9220/XC9221 series is a group of multi-purpose step-down DC/DC controller ICs. The ICs enable a high efficiency, stable power supply with an output current up to 3A to be configured using only a transistor, a coil, a diode, and two capacitors connected externally. Low ESR capacitors such as a ceramic capacitor can be used as an output capacitor.   The XC9220/XC9221 series has a 0.9V (±1.5%) reference voltage, and using externally connected resistors, the output voltage can be set freely. With an internal switching frequency of 300kHz and 500kHz 1.0MHz, small external components can also be used. The XC9220 series is PWM control, and the XC9221 series is PWM/PFM mode, which automatically switches from PWM to PFM during light loads and high efficiencies can be achieved over a wide range of load conditions.   As for the soft-start time, the XC9220/XC9221A and C series is internally set to 4msec and the XC9220/XC9221B and D series can be externally set-up. With the built-in UVLO (Under Voltage Lock Out) function, the external P-channel driver transistor is forced OFF when input voltage becomes 2.3V or lower.    FEATURES Operating Voltage Range : 2.8V ~ 16.0V Output Voltage Externally Set Range : 1.2V or more  (VFB=0.9V+1.5%) Output Current : Less than 3.0A Oscillation Frequency : 300kHz, 500kHz, and 1.0MHz Control Methods : PWM control (XC9220) PWM/PFM automatic switching (XC9221) Soft-Start Function : 4ms, internally set (XC9220/XC9221A, 500kHz) Externally set (XC9220/XC9221B) Protection Circuits : Integral protection (1.0 ms) (XC9220/XC9221 Aand B series) Short-circuit protection Low ESR Capacitor Compatible : Ceramic capacitor Operating Ambient Temperature : - 40℃~ + 85℃ Packages : SOT-25  USP-6C Environmentally Friendly : EU RoHS Compliant, Pb Free     APPLICATIONS ●Set top boxes ●Digital TVs ●DVD / HDD recorders ●Smart phones / Mobile phones ●Note PCs / Tablet PCs    

FLOWMATE Food Grade Pump Water Pump Diaphragm Pump KDP-14 series 12V/24V DC Pump Electric Pump Permanent Magnet Brush/brushless Motor Assemblied Open Flow 1-2LPM Designed for General Purpose Water Dispenser Coffee Machine Auto Vending Machine Portable Electric Sprayer etc.   Product label: FLOWMATE, KDP-14, Pump, Water Pump, Diaphragm Pump, Membrane Pump, Mini Pump, Micro Pump, DC Pump, DC Water Pump, DC Diaphragm Pump, DC Membrane Pump, Mini Water Pump, Mini Diaphragm Pump, Mini Membrane Pump, Micro Water Pump, Micro Diaphragm Pump, Micro Membrane Pump, Electric Pump, Electric Water Pump, Electric Diaphragm Pump, Electric Membrane Pump, Brush Pump, Brushless Pump, Food Grade Pump, Water Dispenser Pump, Water System Pump, Coffee Machine Pump, Vending Machine Pump, Ice Maker Pump, Agriculture pump, Electric Sprayer Pump,  Self-priming pump, micro self-priming pump, mini self-priming pump, self-priming water pump, self-priming diaphragm pump   Diaphragm Pumps are used extensively in many industries and can handle a very wide variety of liquids. Diaphragm Pumps are in the category of "positive displacement" pumps because their flowrates do not vary much with the discharge "head" (or pressure) the pump is working against (for a given pump speed). Diaphragm Pumps can transfer liquids with low, medium or high viscosities and also liquids with a large solids content. They can also handle many aggressive chemicals such as acids because they can be constructed with a wide variety of body materials and diaphragms   Features 1. Food grade2. Small size and easy installation3. Low noise with smooth running4. Self-priming with dry suction 1-2.5 meters5. Dry run without damage6. Long life permanent magnet DC brush motor7. Varible hosing port can be customized 8. Explosion proof design for flammable refrigerants9. Handling cold water and hot water 0-100℃   Applications 1. Water dispenser 2. Coffee machine 3. Vending machine 4. Ice maker 5. Tea table water dispensing 6. Integrated stove 7. Medical equipment 8. Chemical instrument 9. Electric sprayer 10. Wine taker 11. Water purifier/filtration   Specifications Model Hosing Port Rated Volts (VDC) Rated Amps (A) Open Flow (L/min) Noise 30CM (dB) Dry Suction (m) Head (m) Output Pressure (MPA) Weight (KG) Duty Cycle KDP-14 Φ1/4"(6.5mm) OD Pipe 12 0.2 0.8±0.2 43 1.0/1.8 2 0.08 (10PSI) 0.25 Intermittent 12/24 0.3/0.15 1.0± 0.2 45 1.2/2.0 5 0.15 (20PSI) 0.25 Intermittent 12/24 0.4/0.2 1.2± 0.2 48 1.5/2.5 7 0.2 (30PSI) 0.25 Intermittent 12/24 0.5/0.3 1.4± 0.2 50 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.6/0.35 1.6± 0.2 52 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.7/0.4 1.8± 0.2 54 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.8/0.5 2.0± 0.2 56 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 1.0/0.6 2.3± 0.3 58 1.5 10 0.3 (45PSI) 0.25 Intermittent Tested with clean water at 25℃。   Wetted Parts Material Construction Pump housing - PP/PP+20%GF Pump covers - PP/PP+20%GF Diaphragms - Silicone/EPDM/VITON/Santoprene TPV Check valve sealings - Silicone/EPDM/VITON   Performance Curve   Dimension Drawings  

Special Rubber timing belt The rubber timing belt uses high-quality imported neoprene as the main raw material. It is equipped with a variety of auxiliary materials for different purposes; the frame material is an imported high-quality glass fiber cord; the toothed surface is protected by high elastic cloth.

Material: Trait High Speed Steel, Application: trucks parts spare. OEM: OEM Service. Certification: ISO/TS16949. Keyword heavy: Truck Mudguard. Size: Customizable. Production Process: Casting and forging.