![Smart film Proektsia with the function of variable transparency from matte to transparent. Roll 150cm X50m](https://www.qoovee.com/media/cache/93/8a/938a7b66bf1b20da5bad75e6c683d2e7.jpg)
![Smart film Proektsia with the function of variable transparency from matte to transparent. Roll 150cm X50m](https://www.qoovee.com/media/cache/0c/1d/0c1d8f57f808ac93bd728f927ace0a8f.jpg)
![Smart film Proektsia with the function of variable transparency from matte to transparent. Roll 150cm X50m](https://www.qoovee.com/media/cache/cc/f9/ccf938a7221199ca5789b108c57cec74.jpg)
![Smart film Proektsia with the function of variable transparency from matte to transparent. Roll 150cm X50m](https://www.qoovee.com/media/cache/91/a4/91a458474253a7425a971242956a7cba.jpg)
![Smart film Proektsia with the function of variable transparency from matte to transparent. Roll 150cm X50m](https://www.qoovee.com/media/cache/e6/56/e656cff4661d9772d6e8a8df6ab68ffa.jpg)
![Smart film Proektsia with the function of variable transparency from matte to transparent. Roll 150cm X50m](https://www.qoovee.com/media/cache/78/74/7874a1e54e687648d255f0b2b502aa20.jpg)
![Smart film Proektsia with the function of variable transparency from matte to transparent. Roll 150cm X50m](https://www.qoovee.com/media/cache/3b/34/3b34105ce826029097d32217322b6231.jpg)
![Smart film Proektsia with the function of variable transparency from matte to transparent. Roll 150cm X50m](https://www.qoovee.com/media/cache/ba/c9/bac988f4dd1de1f77492d0b4ec9377a0.jpg)
Product description
Smart film Proektsia (Projection) with the function of variable transparency from matte to transparent is a special polymer liquid crystal film that is glued to any glass surface in order to adjust the transparency of the glass in a fraction of a second from the remote control: from matte to transparent and from gray to transparent. Just one press of a button - and the glass can hide the situation from prying eyes or become transparent. Smart tint film PDLC is an innovative solution that has a wide range of applications: car tinting, an alternative to blinds and curtains, confidential rooms (negotiation rooms, recreation areas, fitting rooms), office / room partitions, facade glazing. The rear projection film, in addition to the function of changing the transparency of the glass, can act as a surface for video projection - a good bonus to the main functionality! The image seems to be “hanging in the air”. The viewer does not block the beam from the projector. Usually the viewer does not see the source of the projected image, the projector is hidden behind the screen. Obtaining a seamless and sufficiently large image compared to displays Controlled by the remote control. Low voltage is absolutely safe for humans. Economical power consumption 5 W/m2. Characteristics: 1. Total thickness - 0.35 mm 2. Roll width - 150 cm, length - 75 m 3. Power consumption - 5 W / m2 4. Operates under voltage - 48 V 5. UV protection - 99% 6. Light transmission in transparent mode - 82% 7. Light transmission in matt mode - 6% 8. Temperature range - from -40 to + 70 9. Service life - 10 years.
Learn more
Smart film Proektsia with the function of variable transparency from matte to transparent. Roll 150cm X50m - 83295
Available
5138.41
USD/pcs
5138.41
USD
Minimum order: 1 pcs
Supply ability: 10 pcs/per month
Projection
Not verified supplier
Russia
Shipping information
Calculate and complete your cargo transportation worldwide using Qoovee Logistics.
Guaranteed shipment on time and secure payment Calculate shipping from QooveeSimilar products
LLC "TechPlast Technologies"
Санкт-Петербург, Russia
Specify the price
USD
0
0
Modular supports - a modular system for fixing hanging heavy objects. The TekhPlast Technologies company sells: modular supports, pads for outriggers, road slabs, sheet polymers (plates), rods, raw materials for bushings and bearings, guides and seals, polymer products made according to individual parameters. Our company is engaged in the production of various high-strength parts, the operation of which is associated with high force loads, friction and mechanical stress. Modular props are blocks used to construct temporary structures designed to support heavy objects during construction, moving objects, laying pipes, restoring vehicles, stabilizing cranes and other equipment. The modular design of the blocks makes it possible to create support to stabilize the load and level the equipment on various surfaces. The supports are made of high-strength plastic with a pyramidal pattern, which ensures high reliability and stability of the structure. They are easy to install, do not splinter, unlike wood, and are resistant to fuel, oil and most chemicals. • Benefits of using modular supports: • Improved robust design for higher load limits; • Non-conductive plastic, resistant to oil, fuel and most chemicals; • Safety (does not split like wood); • Pyramid tread helps create a more stable and non-slip working surface; • Ideal for use with heavy equipment, cranes, machinery and vehicles; • Quick and easy installation and dismantling, presence of handles; • Durability. With delivery throughout Russia, you can buy all the items listed above at a favorable price from the TechPlast Technologies company. There are various sizes and thicknesses of polyethylene sheets in stock and on order. We also manufacture polyethylene parts to customer sizes.
LLC "TechPlast Technologies"
Санкт-Петербург, Russia
Specify the price
USD
0
0
Isotrack road slabs (mats) are innovative polymer road slabs for laying temporary pavement. The TekhPlast Technologies company sells: modular supports, pads for outriggers, road slabs, sheet polymers (plates), rods, raw materials for bushings and bearings, guides and seals, polymer products made according to individual parameters. Our company is engaged in the production of various high-strength parts, the operation of which is associated with high force loads, friction and mechanical stress. Our catalog presents three series of composite mats, which differ in area, load parameters for which they are designed, and conditions of use. With their help, temporary access roads are installed on different sections of roads, as well as sites for special equipment are organized at construction sites, warehouses, in wetlands, parking and pedestrian areas, etc. We sell designs of the following series: • L – designed for transport and equipment up to 80 tons (light, flexible, easy to operate); • H – withstands special equipment up to 150 tons (for soft soil and hard surfaces); • X – used for coatings with a load of up to 730 tons (high-strength). As a basis for the boards, the manufacturer uses polymer raw materials processed by pressing or extrusion methods. The products undergo quality control and have good performance characteristics. Mat sizes from 1000x2000 mm. The products are frost-resistant and suitable for different climatic conditions. Installation is possible several times, after dismantling they retain their properties. With delivery throughout Russia, you can buy all the items listed above at a favorable price from the TechPlast Technologies company. There are various sizes and thicknesses of polyethylene sheets in stock and on order. We also manufacture polyethylene parts to customer sizes.
LLC "TechPlast Technologies"
Санкт-Петербург, Russia
Specify the price
USD
0
0
Linings for outriggers (crane supports) TrigPad (UHMWPE, VMPE) - strong and durable material ensures reliability and safety of equipment installation. The TekhPlast Technologies company sells: modular supports, pads for outriggers, road slabs, sheet polymers (plates), rods, raw materials for bushings and bearings, guides and seals, polymer products made according to individual parameters. Our company is engaged in the production of various high-strength parts, the operation of which is associated with high force loads, friction and mechanical stress. Pads for outriggers serve to increase the support area of manipulators and cranes during work. They make it possible to avoid damage to the road surface and achieve maximum stability on unstable types of road surface and soil. • Suitable for cranes with lifting capacity up to 400 tons; • Prevent the crane from falling on unstable soils and uneven surfaces; • Protect the road surface from damage; • They have a greater margin of safety compared to analogues, and are not subject to corrosion; • Operating temperature range of PE-1000 from -260 to +80 °C; • Suitable for all models of cranes, aerial platforms and other equipment. With delivery throughout Russia, you can buy all the items listed above at a favorable price from the TechPlast Technologies company. There are various sizes and thicknesses of polyethylene sheets in stock and on order. We also manufacture polyethylene parts to customer sizes.
LLC "TechPlast Technologies"
Санкт-Петербург, Russia
Specify the price
USD
0
0
Plates made of polymers: polyethylene, polyamide, polyimide, caprolon, polypropylene, PEEK, HDPE and POM (UHMWPE, HMWPE, HDPE, PEEK, PA-6, POM, PP) The TekhPlast Technologies company sells: modular supports, linings for outriggers, road slabs, sheet polymers (plates), rods, raw materials for bushings and bearings, guides and seals, polymer products according to individual parameters. Sheet polymers such as polyethylene, polyamide, polyimide, PETG, PEEK, HDPE and polypropylene are highly durable, chemical resistant and lightweight. They are widely used in various industries such as packaging, medical devices, automotive and electronics. The main advantages of sheet polymers include recyclability, anti-corrosion properties, resistance to ultraviolet radiation and a wide range of operating temperatures. They also have excellent electrical insulation and durability, making them an excellent choice for a variety of engineering applications. Wide range of materials: Ethipol-1000 (PE-1000), Ethipol-500 (PE-500), Pefecton (PEEK), Ethipol-300 (PE-300), polyoxymethylene “ExtraPom” (POM), ABS plastic, PETG, polyamide -12 (PA-12), polyimide, polypropylene (PP), caprolon (PA-6), low-density polyethylene (HDPE), fluoroplastic (F4). With delivery throughout Russia, you can buy all the items listed above at a favorable price from the TechPlast Technologies company. There are various sizes and thicknesses of polyethylene sheets in stock and on order. We also manufacture polyethylene parts to customer sizes.
LLC "TechPlast Technologies"
Санкт-Петербург, Russia
Specify the price
USD
0
0
Polymer rods: polyethylene, polyamide, polyimide, caprolon, PEEK, HDPE and POM (UHMWPE, HMWPE, HDPE, PEEK, PA-6, POM) The TekhPlast Technologies company sells: modular supports, outrigger pads, road plates, sheet polymers (plates), rods, raw materials for bushings and bearings, guides and seals, polymer products according to individual parameters. Rods made from polymers such as polyethylene, polyamide, polyimide, PEEK, HDPE and POM have high strength, chemical resistance and low thermal conductivity. They are widely used in the production of parts for mechanical engineering, medical devices, electronics and other industries. The main advantages of polymer rods include low density, wear resistance, impact resistance, and the ability to be processed by a variety of methods, including milling, turning, and injection molding. They also have good dielectric strength and biocompatibility, making them an attractive choice for specialized applications such as the medical and electrical industries. Wide range of materials: Ethipol-1000 (PE-1000), Ethipol-500 (PE-500), Pefecton (PEEK), Ethipol-300 (PE-300), polyoxymethylene “ExtraPom” (POM), ABS plastic, PETG, polyamide -12 (PA-12), polyimide, polypropylene (PP), caprolon (PA-6), low-density polyethylene (HDPE), fluoroplastic (F4). With delivery throughout Russia, you can buy all the items listed above at a favorable price from the TechPlast Technologies company. In stock and on order there are various options for the diameter and length of polyethylene rods. We also manufacture polyethylene parts to customer sizes.
LLC "Fish-Market"
Russia
USD
0.49/pcs
0.49
Offer: Glass jar TO-82, made of thick transparent glass with a twist screw cap, volume 0.19 l. The lid is matte black. Can weight with lid: 160g. Package: 15 pcs. 1300 pcs available in stock. Price=43.00 rub. We will provide all the necessary documents! The price includes VAT and loading from a warehouse in Vladivostok. We will assist in shipping to your warehouse. I will be happy to answer your questions.
Fallen Polymer
Тюмень, Russia
USD
21.48/pcs
21.48
Fallen Polymer - offers wholesale supplies of its own production - a product for the repair of plastic parts made of polypropylene (PP) and its derivatives. Black triangular rod for repairing parts with a thickness of more than 2.5 mm. Suitable for cases when it is necessary to hide traces of repair of black parts. Recommended for professional use. Product for the repair of plastic parts made of polypropylene (PP) and its derivatives. A 10-meter long triangular rod of black color allows you to hide traces of repairs on black parts. This material is perfect for repairing parts with a thickness of more than 2.5 mm. The advantage of packaging in the form of a coil is a solid long rod, when working with which there are no unused sections, it also ensures mobility, compactness, ease of operation and storage. The welding strength of this material is so high that it does not require laying transverse overlaps in any places other than the exit of the seam, which saves filler rod and working time. If you need a material with identical characteristics, but at a more attractive price with a bright blue rod that allows you to work in rooms with limited lighting, we recommend considering the product fp60017. During the repair process, the material has elastic deformation and is welded in the range of 280-330 C, depending on the additives filling the plastic. Reaching the required temperature for welding can be determined visually when a tear-like shine appears on the part being repaired and on the filler rod. If it is necessary to deform the part, it is enough to heat it to a temperature of 160 - 180 C and give it the desired shape. The strength of a repair seam when welded with original Fullen Polymer materials, subject to welding technology, is about 70-80% of the nominal value.
ISA
Istanbul, Turkey
USD
3.37 - 92.0/m2
Laminated. Tempered. Tinted. Bulletproof. Mirrors The main production of the plant is the production of float glass. we have glass production enterprises in Turkmenistan and Kyrgyzstan. Our main office is located in Istanbul. We offer the following types of glass: Float glass: 3.5-10 mm (M0-4 grades) Laminating glass: up to 80 mm Bulletproof glass: 28, 34 and 70 mm. Glass Container Mirrors We can supply 20 million m2 per year. Minimum order quantity is 1 truck or 2200 m2 (4mm float) We would be happy to work with you, if you have any questions you can write. Below are your contacts.
USD
1.0 - 5.5/m
High Performance Nylon And Polyester Screen Filter Mesh For Fuel And Oil Filtration
We provide standard and customized woven mesh fabrics in a wide range of micron, width, length, colors, and treatments to suit different customers’ needs. Both our nylon and polyester mesh fabric solutions possess distinct benefits that make them suitable for kinds of filtration.
Common Applications of Nylon & Polyester Screen Filter Mesh
Nylon and Polyester filter mesh are most used in today’s market. The performance of a filter mesh is highly dependent on the yarns woven. Nylon and polyester are synthetic polymers often used to create mesh screens for filtration. While both are flexible, durable, and lightweight, they each have distinct benefits and limitations that impact their suitability for certain applications. Nylon and polyester filter mesh are used in filtration solutions for numerous industrial, commercial, and recreational applications.
Sifting and milling
Dust collection and separation
Fuel and oil filtration in automotive and aerospace systems
Filtration systems in refrigerators, dryers, and other home appliances
Filtering tests and analysis in laboratory applications
Infusion and transfusion filters in medical device
Share Filters Manufacture Capabilities
Our in-house capabilities include enhanced processing such as filter mesh slitting, stamping, tubing, dyeing,
injection molding and finishing of products. Share Filters Can Offer the Nylon Filter Mesh, Polyester mesh,
PP filter mesh, metallic mesh in Different Types to meet customs' Filtration demands.
Share Filter synthetic meshes can be made from a variety of materials such as polyamide, polyester, polypropylene, etc. You can order by the roll or in cutting shapes.
Ultrasonic slitting is also used for manufacturing fabric strips and produces a closed edge with very little material build up at the edge.
Our cutting method include Laser cutting, Cold cutting, Hot cutting, Slitting, Punching. Professional cutting using custom made tools that will not damage the materials.
Sonic welding are accurate, clean. precision, sleeves and bags for blood filtration, biopsy bag for rosin bag for rosin press are examples of applications that benefit from this technology.
Share Filters sewing products are carried out by highly skilled and experienced machinists, which ensure you get the right level of consistent quality.
Custom plastic molded filter combine precise filter mesh with polymer plastic. Industry serve: Automotive, Appliances, Food and beverage, Medical, Life Science and Laboratory, etc.
About Us
Share Filters has over 20 years of experience developing and manufacturing filter mesh and custom product for our customer's screen and filtration needs. We can offer the filter mesh and filter components services including slitting, cutting, welding, sewing and injection molding. Our customer base comes from a wide variety of industries including – Automotive, Home appliances, Food and beverage, Milling, Medical, Life Science and laboratory, Electronical as well as more general engineering, giving us a wealth of experience in many areas.
IP "BERK GERDEN"
Ашхабад, Turkmenistan
Specify the price
USD
Waterproofing roll fused bitumen-polymer material with a reinforcing base made of polyester fiber (polyester). Thickness from 3 to 5 mm. for the bottom layer of waterproofing, both sides of the material are covered with an easily meltable polymer film; for the top layer of waterproofing, one side of the material is covered with an easily meltable polymer film, the other side - with aluminum foil or coarse-grained slate coating (gray, red, green - to choose from).
Handan Shibo New Materials CO.,LTD
Handan, China
USD
2750.0/Ton
2750.0
TPE(Thermoplastic Elastomer) is a kind of Thermoplastic Elastomer material, with high strength, high resilience, injection processing characteristics, a wide range of applications, environmental protection, non-toxic safety, has excellent coloring. Soft touch, weather resistance, fatigue resistance and temperature resistance, superior processing performance, no vulcanization, can be recycled to reduce costs, not only can two injection molding, with PP, PE, PC, PS, ABS and other matrix materials cladding bonding, can also be molded separately.Application: Home appliance shell, handle, grip, etcProduct performance: excellent hand feel, and hard adhesive ABS, PC, PC/ABS, PA6, PA66 and other strong bonding. Non-slip and labor-saving, and easy to color and processing, with a wide range of design space
Application scope of oiling series: all kinds of oiling toys, daily articles, etc., widely replace PVC.
Product performance: low price, replace PVC first choice, health, safety, environmental protection, easy to grease.
Gm seriesApplication: Stationery, sports equipment, sealing ring, handle, etc
Product properties: Excellent hand feel, good UV resistance, chemical resistance and easy coloring and processing, with a wide range of design space.
Functional seriesApplication: Sealing ring, auto parts, handle, gear, etc.
Product performance: with good shock absorption, compression resistance, electrical insulation, steel and so on.
Handan Shibo New Materials CO.,LTD
Handan, China
USD
1450.0/Ton
1450.0
The basic introduction of butadiene rubber BR9000
Compared with natural rubber and styrene butadiene rubber, butadiene rubber has the characteristics of high elasticity, good cold resistance, low heat generation, good flexure resistance and good dynamic performance. The main disadvantages are poor wet slip resistance, low tearing strength and tensile strength, large cold flow, slightly poor processing performance, and must be used with other types of rubber.
The main uses of butadiene rubber
China's butadiene rubber is mainly used in tires, shoes, high impact polystyrene and ABS resin modification, etc.
Suppliers in this category
All suppliers in the category
Product:
Supplier:
Min. order:
Directory
Marketing department:
Marketing department:
Marketing department:
Information
Inform manager that you found the product on Qoovee
The contact details of the supplier is not available!
Send message
Get quotes for logistics