Колесоотбойник резиновый, парковочный (610х145х120) - 43716

his series of products is made of aluminum alloy material with light weight, excellent anti-seismic and high heat exchange efficiency.

Technical data + supply Pin 1 - common Pin 2 Accuracy, max. [±FS%] 1 % Accuracy, typical [±FS%] 0.5 % Adj. zero point and span No Ambient temperature range [°C] [max] 85 °C Ambient temperature range [°C] [min] -40 °C Ambient temperature range [°F] [max] 185 °F Ambient temperature range [°F] [min] -40 °F Approval ATEX Approval comments ATEX Ex ec IIA T4 Gc Autofrettage Pressure 1600 bar China RoHS compliance Yes exceed limitations Compensated temp. range [°C] [max] 80 °C Compensated temp. range [°C] [min] 0 °C Compensated temp. range [°F] [max] 176 °F Compensated temp. range [°F] [min] 32 °F EEE category 5 small equipment (any external dimension 50 cm) Electrical conn. Male/Female Male and Female Electrical connection Angular connector Electrical connection size Pg 9 Electrical connection standard EN 175301-803-A Enclosure rating IP IP65 EU RoHS compliance Yes with exemptions EU RoHS exemption clause No Flush diaphragm No High Clipping Level 22.4 In scope of WEEE Yes In scope of WEEE and contain batteries No International Article Number 5702423064465 Intrinsically safe No Low Clipping level 3.6 Medium temperature range [°C] [max] 85 °C Medium temperature range [°C] [min] -40 °C

GM05,GM1,GM2,GM3,GM5,GM6,GM7,GM9 SAI of GM series Hydraulic Piston Motor, range GM05, GM1, GM2, GM3, GM5, GM6, GM7, GM9 for drilling rig motor, widely applied in hydraulic and transmission systems of plastics machinery, light industrial machinery, heavy type metallurgical machinery, for drilling rig  petroleum and coal mining machinery, lifting and transportation equipment, ship's deck machinery, geological prospecting equipments, etc.

Cavity T-11A Series 1 Capacity 15 gpm Pilot Ratio 3:1 Maximum Recommended Load Pressure at Maximum Setting 3075 psi Maximum Setting 4000 psi Pilot Configuration Bleed through Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Adjustment - No. of CCW Turns from Min. to Max. Setting 3.75 Operating Characteristic Standard Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.35 lb.

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 2.3:1 Maximum Recommended Load Pressure at Maximum Setting 3850 psi Maximum Setting 5000 psi Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Adjustment - No. of CCW Turns from Min. to Max. Setting 3.75 Operating Characteristic Semi-restrictive Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.35 lb.

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 4.5:1 Maximum Recommended Load Pressure See Technical Features Pilot Configuration Sealed Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Check Cracking Pressure 25 psi Operating Characteristic Semi-restrictive Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Model Weight 0.27 lb.

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 4.5:1 Maximum Recommended Load Pressure at Maximum Setting 3850 psi Maximum Setting 5000 psi Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Adjustment - No. of CCW Turns from Min. to Max. Setting 3.75 Operating Characteristic Semi-restrictive Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.35 lb.

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 3:1 Maximum Recommended Load Pressure at Maximum Setting 3075 psi Maximum Setting 4000 psi Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Adjustment - No. of CCW Turns from Min. to Max. Setting 3.75 Operating Characteristic Semi-restrictive Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.35 lb.

Cavity T-11A Series 1 Capacity 15 gpm Pilot Ratio 5:1 Maximum Recommended Load Pressure at Maximum Setting 4615 psi Maximum Setting 6000 psi Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Check Cracking Pressure 40 psi Adjustment - No. of CCW Turns from Min. to Max. Setting 5 Operating Characteristic Standard Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.44 lb.

Technical Data  Series 0 Cartridge Thread M16 Valve Hex Size 3/4 in. Valve Installation Torque 20 - 25 lbf ft Cavity T-162A What models can this kit be used with? CDAP Mechanically operated, back-to-back check valve CDAQ Mechanically operated, back-to-back check valve CNAC Fixed-orifice, non-pressure compensated, flow control valve with reverse flow check CNBC Free flow nose to side check valve with bypass orifice CSAN Insert style, single ball shuttle valve with signal at port 2 CSAW Single ball shuttle valve with signal external CSAY Single ball shuttle valve with signal at port 2 CXAD Free flow side to nose check valve CXBA Free flow nose to side check valve CXBG Flush mount, free flow nose to side check valve CXBM Insert style, free flow nose to side check valve DFBD FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1, 3000 psi (210 bar) DFBE FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1, 3000 psi (210 bar) DFBF FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1 DFBG FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1 DTBF FLeX Series 2-way, direct-acting, solenoid-operated directional blocking poppet valve FCBB Fixed-orifice pressure compensated flow control valve with reverse flow check FPBD FLeX Series pilot-operated, normally closed, electro-proportional throttle - flow 2-1 - 3000 psi (210 bar) FPBE FLeX Series pilot-operated, normally closed, electro-proportional throttle with reverse flow check - flow 2-1 - 3000 psi (210 bar) FPBF FLeX Series pilot-operated, normally closed, electro-proportional throttle - flow 2-1 FPBG FLeX Series pilot-operated, normally closed, electro-proportional throttle with reverse flow check - flow 2-1 FPBI FLeX Series pilot-operated, normally open, electro-proportional throttle - flow 2-1 FPBJ FLeX Series pilot-operated, normally open, electro-proportional throttle with reverse flow check - flow 2-1 FPBM FLeX Series pilot-operated, normally open, electro-proportional throttle - flow 2-1 - 3000 psi (210 bar) FPBN FLeX Series pilot-operated, normally open, electro-proportional throttle with reverse flow check - flow 2-1 - 3000 psi (210 bar) FPBU FLeX Series electro-proportional, blocking poppet throttle - normally closed FQBA Fixed-orifice, flow fuse valve FXBA Fixed-orifice, pressure compensated flow control valve NCBB Fully adjustable needle valve with reverse flow check NFBC Fully adjustable needle valve RDBA Direct-acting relief valve RPCC Pilot-operated, balanced piston relief valve RQCB Kick-down, pilot-operated, balanced piston relief valve XZCA All ports blocked cavity plug XZCC Flush mount, all ports blocked cavity plug XZOA All ports open cavity plug XZOC Flush mount, all ports open cavity plug  

Maximum Coil Temperature at 68ºF (20ºC) Ambient 218ºF (105ºC) Arc Suppression (TVS) Included Power Consumption (cold) - at rated voltage 22 watts Maximum Ambient Temperature 122 °F Voltage/Frequency 24 VDC Operating Voltage Range +/- 10% nominal Duty Cycle Rating 100 % Connector ISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pin Connector Environment Rating IP65/IP67 Solenoid Tube Diameter .75 in. Coil Nut Torque 4.5 lbf in. Model Weight 8.2 oz.