Oxygen station for 100 cylinders - 10926

DuPont™ Tyvek® 500 Hooded Jumpsuit Expert.Material: TYVEK polyethylene - 100%, 41 g/m²Weight: less than 180g.Closure: zipperDesign features: 3-piece hood provides optimal fit and freedom of movement of the head. Elasticated hood, cuffs and hem, glued-in elastic waistband.Design allows for freedom of movement.Easy to grip with gloves, oversized zipper pull tab.Tyvek® material is made from high-density polyethylene fibers using fast twist technology for a superior fit. protective properties, durability and convenience. Tyvek® is a breathable material that is permeable to air and water vapor, but repels splashes of aqueous solutions and aerosols. A high degree of barrier protection against fine particles, viral and bacterial agents, fibers up to 1 micron in size, and at the same time extremely low linting of the material itself. Antistatic treatment. Silicone-free. Applications: medical, pharmaceutical, chemical, oil and gas, equipment repair, paint spraying, general cleaning and many others. Complies with TR CU 019/2011Color: white Size range: S, M, L, XL, XXL, XXXL

his series of products is made of aluminum alloy material with light weight, excellent anti-seismic and high heat exchange efficiency.

Technical data + supply Pin 1 - common Pin 2 Accuracy, max. [±FS%] 1 % Accuracy, typical [±FS%] 0.5 % Adj. zero point and span No Ambient temperature range [°C] [max] 85 °C Ambient temperature range [°C] [min] -40 °C Ambient temperature range [°F] [max] 185 °F Ambient temperature range [°F] [min] -40 °F Approval ATEX Approval comments ATEX Ex ec IIA T4 Gc Autofrettage Pressure 1600 bar China RoHS compliance Yes exceed limitations Compensated temp. range [°C] [max] 80 °C Compensated temp. range [°C] [min] 0 °C Compensated temp. range [°F] [max] 176 °F Compensated temp. range [°F] [min] 32 °F EEE category 5 small equipment (any external dimension 50 cm) Electrical conn. Male/Female Male and Female Electrical connection Angular connector Electrical connection size Pg 9 Electrical connection standard EN 175301-803-A Enclosure rating IP IP65 EU RoHS compliance Yes with exemptions EU RoHS exemption clause No Flush diaphragm No High Clipping Level 22.4 In scope of WEEE Yes In scope of WEEE and contain batteries No International Article Number 5702423064465 Intrinsically safe No Low Clipping level 3.6 Medium temperature range [°C] [max] 85 °C Medium temperature range [°C] [min] -40 °C

GM05,GM1,GM2,GM3,GM5,GM6,GM7,GM9 SAI of GM series Hydraulic Piston Motor, range GM05, GM1, GM2, GM3, GM5, GM6, GM7, GM9 for drilling rig motor, widely applied in hydraulic and transmission systems of plastics machinery, light industrial machinery, heavy type metallurgical machinery, for drilling rig  petroleum and coal mining machinery, lifting and transportation equipment, ship's deck machinery, geological prospecting equipments, etc.

Cavity T-11A Series 1 Capacity 15 gpm Pilot Ratio 3:1 Maximum Recommended Load Pressure at Maximum Setting 3075 psi Maximum Setting 4000 psi Pilot Configuration Bleed through Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Adjustment - No. of CCW Turns from Min. to Max. Setting 3.75 Operating Characteristic Standard Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.35 lb.

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 2.3:1 Maximum Recommended Load Pressure at Maximum Setting 3850 psi Maximum Setting 5000 psi Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Adjustment - No. of CCW Turns from Min. to Max. Setting 3.75 Operating Characteristic Semi-restrictive Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.35 lb.

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 4.5:1 Maximum Recommended Load Pressure See Technical Features Pilot Configuration Sealed Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Check Cracking Pressure 25 psi Operating Characteristic Semi-restrictive Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Model Weight 0.27 lb.

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 4.5:1 Maximum Recommended Load Pressure at Maximum Setting 3850 psi Maximum Setting 5000 psi Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Adjustment - No. of CCW Turns from Min. to Max. Setting 3.75 Operating Characteristic Semi-restrictive Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.35 lb.

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 3:1 Maximum Recommended Load Pressure at Maximum Setting 3075 psi Maximum Setting 4000 psi Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Adjustment - No. of CCW Turns from Min. to Max. Setting 3.75 Operating Characteristic Semi-restrictive Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.35 lb.

Maximum Coil Temperature at 68ºF (20ºC) Ambient 218ºF (105ºC) Arc Suppression (TVS) Included Power Consumption (cold) - at rated voltage 22 watts Maximum Ambient Temperature 122 °F Voltage/Frequency 24 VDC Operating Voltage Range +/- 10% nominal Duty Cycle Rating 100 % Connector ISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pin Connector Environment Rating IP65/IP67 Solenoid Tube Diameter .75 in. Coil Nut Torque 4.5 lbf in. Model Weight 8.2 oz.