Epoprime epoxy primer - 32001

For tinting oils and wax, we recommend using our tints, which easily give the desired shade while maintaining the decorative effect of the wood grain. Our unique paint and varnish coating formulations are based on natural and modified natural ingredients. The composition of Nevskaya Artel products includes such ingredients as: linseed oil, pine resin, beeswax, gum turpentine. The entire line of our wood processing products is manufactured in Russia using domestic raw materials, which eliminates dependence on imports.

Application: To protect shelves, walls, floors in steam rooms. For bath utensils. Enhanced moisture resistance. Apply wax to the surface of the wood with a brush, brush or rag. Remove excess wax. After 24 hours, polish with a polishing machine or a rag. If necessary, you can apply wax as a second layer. Drying time: 24 hours at an optimal temperature of 20C and humidity 60%. Consumption for planed wood: in one layer - up to 18 m2, in two layers - up to 10 m2. Note: We also recommend paying attention to the entire line of wood products from the Nevskaya Artel brand.

Application: To protect shelves, walls, floors in steam rooms. For bath utensils. Enhanced moisture resistance. Apply wax to the surface of the wood with a brush, brush or rag. Remove excess wax. After 24 hours, polish with a polishing machine or a rag. If necessary, you can apply wax in a second layer. Drying time: 24 hours at an optimal temperature of 20C and humidity 60%. Consumption for planed wood: in one layer - up to 18 m2, in two layers - up to 10 m2.

E-Z MIX provides a variety of painting supplies designed with precision to help you measure, mix, pour, store, and touch-up a variety of coatings.

Isobutyl alcohol or isobutanol is used as a solvent in the paint and varnish industry, for the production of esters, paints and all kinds of organic compounds. It is obtained, as well as butyl alcohol chemically close to it, by oxosynthesis from propylene.

High quality, super white, washable, luxury acrylic based facade paint. Facade paint based on acrylic, made according to Italian technology. The paint is intended for finishing the facades of buildings, application indoors is possible. FEATURES: High-quality acrylic facade paint with high covering power, excellent adhesion and wear resistance, weather-resistant, low water absorption, high degree of diffusion. Resistant to sudden temperature changes from -500C to +500C. The classic acrylic formula allows you to achieve an ideal result and easy handling. COMPOSITION: Acrylic, titanium dioxide, calcium carbonate, water are used in the production of permofacade paint. such as: concrete, brick, plaster. We recommend leveling the surface with PermoMajun finishing putty and saturating it with PermoBinder primer or PermoGrunt deep penetration primer. It is applied with a brush, roller, spray gun. The best result is achieved when applied in two layers, the temperature of the treated surface should not be lower than +5 ° C and not higher than + 35 ° COLORING: Easy to tint by computer or manually. TYPES OF PACKAGING: Plastic buckets weighing 3.5 kg., 6 kg., 10 kg. , 20 kg. Any volumes, in the range of water-based, acrylic, facade paints, primers, etc. Own production, high quality raw materials.

Calcium/zinc based stabilizer suitable for the production of rigid PVC pipes. This stabilizer has a sufficient range of effective lubricants, which makes it unnecessary to use additional lubricants in the formulation. This stabilizer has been developed for twin screw extruders and large high pressure pipes. It is the best choice for hygiene products. Form Powder Color White Ash (%) 26±1 Solubility in water Insoluble Application Pressure pipes (6-16 bar) Water supply pipes Potable water pipes Recommended flow rates Depending on formulation, process conditions and product type; 2.5-3.5 parts Standard packaging 25 kg net, in a composite bag

Multi-purpose and economical pigment, mainly used for whitening plastics such as PVC, polystyrene, ABS. Using 0.15 (parts) of this product can reduce the use of titanium dioxide by up to 50% in applications where light fastness is not required. Due to the lower titanium content, the product is less brittle. This grade improves whiteness without the use of other pigments, so it is too economical Chemical-Physical Specification Form Powder Color Blue Moisture (%) Max0.1 Application Various kinds of white PVC products such as pipes, profiles and sheets. Recommended costs Depending on the recipe, process conditions and product type; 0.05-0.25 parts Standard packaging 25 kg net, in a composite bag

Blue pigment based on copper. It has excellent dispersion in PVC mixture. Chemical-Physical Specification Solfur Max. 0.3 Moisture (%) Max 1 Water Max 1.5 325 mesh sieve (%) Max. 0.5 Application Plastics, Paints, Printing Inks, Rubber, Stationery, etc. Recommended costs Depending on process conditions and product type. Standard packing 25 kg net, paper bag.

It will be produced on demand

TEST. Impregnation MONOPOL 2 (membrane former) is a solution of transparent acrylic lacquer, which, when applied, compacts the concrete surface and forms a thin, wear-resistant film that effectively protects fresh concrete from moisture loss. Source: