Nur Sofyan

Product Highlights • Zenmuse Z15-A7 Gimbal for Sony a7S / a7R• Gimbal Provides 360° Camera Rotation• Collapsible Frame and Folding Props• Up to 18 Pound Total Take-Off Weight• Low Gimbal Mounting with Dampening• Retractable Landing Gear• DJI A2 Flight Control System• Supports Futaba FASST / DJI DESST Radios• Up 18 Minutes Flying at 12,000mAh• Compatible with iPad Ground Station DJI Spreading Wings S900 Hexacopter Frame Diagonal Wheelbase 35.4" / 900 mm Frame Arm Length 14.1 / 358 mm Frame Arm Weight Including Motor, ESC, and Propellers: 11.1 oz / 316 g Center Frame Diameter 10.7" / 272 mm Center Frame Weight With Landing Gear Mounting Base and Servos: 2.6 lb / 1.2 kg Landing Gear Dimensions 18.1 x 17.7 x 14.2 / 460 x 450 x 360 mm Motor Stator Size 1.6 x 0.6" / 41 x 14 mm Motor Velocity Constant KV: 400 rpm/V Maximum Power Consumption 500 W Weight With Cooling Fan: 5.6 oz / 158 g Electronic Speed Control (ESC) Working Current 40 A Working Voltage 6S LiPo Signal Frequency 30 to 450 Hz Drive PWM Frequency 8 kHz Weight With Cooling Fan: 1.2 oz / 35 g Propeller Type Folding Material Plastic Size 15 x 5.2" / 381 x 132 mm Weight 0.5 oz / 13 g Flight Parameters Supported Flight Control Systems DJI A2 and WooKong-M Take-Off Weight 10.4 to 18.1 lb / 4.7 to 8.2 Kg Total Weight 7.3 lb / 3.3 Kg Battery Requirements LiPo: 6S, 10000 to 15000 mAh, 15C (minimum) Maximum Power Consumption 3000 W Hover Power Consumption 1000 W at 15 lb / 6.8 Kg takeoff weight Hover Time 18 minutes at 12000 mAh and 15 lb / 6.8 Kg takeoff weight Operating Temperature 14 to 104°F/ -10 to 40°C Packaging Info Box Dimensions (LxWxH) 19.8 x 15.7 x 12.7" DJI A2 Flight Control System for Multi-Rotor Aircraft Supported ESC Output 400 Hz refresh frequency Supported Transmitters With Built-in Receiver: Futaba FASST series and DJI DESST series Supported External Receivers Futaba S-Bus, S-Bus2, DSM2 Other DJI Products Supported Z15, H3-2D, iOSD, 2.4G Bluetooth Data Link, and S800 EVO Hovering Accuracy (GPS Mode) Vertical: ±1.6' / 0.5 mHorizontal: ±4.9' / 1.5 m Maximum Wind Resistance < 26.2 fps (8 m/s) / 17.9 mph (28.8 km/h) Maximum Yaw Angular Velocity 150 deg/s Maximum Tilt Angle 35° Ascent/Descent ±19.7 fps / 6 m/s Power Requirements Maximum: 5 WTypical: 0.3 A at 12.5 V System Requirements Assistant Software: Windows 8, 7, or XP SP3 -- 32 or 64-bit Operating Temperature 23 to 140°F / -5 to 60°C Dimensions Flight Controller: 2.1 x 1.5 x 0.6" / 54 x 39 x 14.9 mmIMU: 1.6 x 1.2 x 1" / 41.3 x 30.5 x 26.3 mmGPS-Compass Pro: 2.4" (diameter) x 0.6" / 62 mm (diameter) x 14.3 mmLED-BTU-I: 1.2 x 1.2 x 0.3" / 30 x 30 x 7.9 mmPMU: 39.5mm x 27.6mm x 9.8mm Weight Overall: 7.9 oz / 224 g Packaging Info Box Dimensions (LxWxH) 6.9 x 4.7 x 2.7" DJI Zenmuse Z15-A7 3-Axis Gimbal for Sony a7S / a7R Peripheral Supported Camera Sony a7S / a7R Supported Lens Sony FE 35mm f/2.8 ZA Control Requirements At least 4 spare receiver channelsS-Bus/PPM receiver supported Software Requirements For Assistant Software: Windows 8, 7, XP SP3 -- 32 or 64-bit Electrical Characteristics Working Current Static Current: 200 mA at 25 VDynamic Current: 400 mA at 25 VLocked-Rotor Current: 4 A at 25 V GCU BEC Output 10 A at 12 V Transmit Power GCU Wireless Video Transmission: 1 A at 12 V Performance Load Weight (Reference Value) 1.4 lb / (622 g) with Sony a7S, FE 35mm f/2.8 ZA lens, battery, lens hood, and SD Card 1.3 lb (580 g) with Sony a7SR, FE 35 mm f2.8 ZA lens, battery, lens hood, and SD Card Controlled Angle Accuracy ±0.01° Maximum Controlled Rotation Speed Pan Axis: ±130°/s Tilt Axis: ±130°/sRoll Axis ±30°/s Controlled Rotation Range Pan Axis Control: ±360° continuous rotationTilt Axis Control: +50°:/-140° Roll Axis Control: ±40° General Power Requirements GCU: 4S to 12 S LiPo (6S if using S800, S1000+) Operating Temperature 14 to 122°F (-10 to 50°C) Dimensions Gimbal: 8.7 x 8.7 x 7.5" (220 x 220 x 190 mm)Camera Frame Dimensions: 5.6 x 3" (142 x 76 mm)GCU: 2.5 x 1.4 x 0.8" (64.2 x 34.1 x 19.5 mm) Weight Gimbal: 2.9 lb (1.3 kg)GCU: 2.2 oz (63 g) Packaging Info Box Dimensions (LxWxH) 10.0 x 9.449 x 9.37"

50MP 43.8 x 32.9mm CMOS Sensor 16-Bit Color, 14-Stop Dynamic Range Hasselblad Natural Color Solution Full HD 1080p H.264 Video at 25 fps ISO 100-25600, Shooting Up to 2.3 fps Central Shutter: 60 min to 1/2000 sec 2.36MP XGA Electronic Viewfinder 3.0" 920k-Dot Touchscreen LCD Monitor XCD 45mm f/3.5 Lens Shoulder & Leather Hand Straps, Gift Box Determined to shake up the photographic industry, Hasselblad has unleashed a worlds first in the form of the X1D-50c Medium Format Mirrorless Digital Camera. This camera takes the well-regarded 50MP 43.8 x 32.9mm CMOS sensor found in numerous medium format systems and incorporates it into a revolutionary mirrorless camera body. Designed and handmade in Sweden, this camera is a precision tool with exceptional ergonomics and a compact size that even rivals smaller format systems. Taking this system above and beyond the rest is a large sensor that works hand-in-hand with the Hasselblad Natural Color Solution to create phenomenal raw images with smooth tonal gradations thanks to 16-bit color depth and 14 stops of dynamic range. Image quality is superb, and Hasselblads electronic system is capable of capturing clean images within a sensitivity range of ISO 100-25600, while also being able to capture photos at a rate of up to 2.3 fps. Moving a bit beyond pure image quality, the X1D embraces the Hasselblad Central Lens Shutter, enabling shutter speeds as long as 60 minutes or as short as 1/2000 second, with flash sync possible at every speed. Additionally, to make the camera more versatile, Full HD 1080p video at 25 fps using H.264 compression is possible. Moving into operational details, the X1D embraces mirrorless design by incorporating a 2.36MP XGA electronic viewfinder that permits natural, eye-level monitoring with the added advantage of overlays and programmable information in direct sight. One such feature would be the ability to shoot in various aspects with a view that compensates for such changes, including square or the classic XPan panoramic format. Alongside this EVF is a 3.0" 920k-dot touchscreen LCD on the rear that permits intuitive operation of all of the cameras features and settings. For more physical and tactile use, the X1D offers front and rear dials as well as a mode dial which can be locked into a recessed position to prevent accidental changes when it is in your bag. There are also dual SD card slots for backup, organization, or just having extra storage. Bringing the system into the modern age is built-in Wi-Fi, which allows for remote connection and file transfer as well as instant geotagging of your files. Additionally, it has Mini HDMI, audio input and output, and a super-fast USB 3.0 Type-C connection. Imaging Resolution 50 MP (8272 x 6200 pixels) Sensor 43.8 x 32.9 mm CMOS sensorIR filter mounted in front of CMOS sensor Pixel Size 5.3 x 5.3 m Bit Depth 16-bitDynamic range approx. 14 stops File Formats Hasselblad RAW 3FR, JPEG File Size RAW 3FR: 65 MB on averageTIFF 8-bit: 154 MB Color Management System Hasselblad Natural Color Solution Storage Type 2 x SD card slot Shooting Modes Single shot stills or video Capture Rate 1.7-2.3 fps Focus Autofocus metering via contrast detectionInstant manual focus override Lens Compatibility Hasselblad X-system lens line with integral central shutterHasselblad H-system lens line via optional adapter Exposure Control Shutter Speeds 60 min to 1/2000 sec (depending on lens in use) ISO Range ISO 100, 200, 400, 800, 1600, 3200, 6400, 12800, 25600 Metering Options Spot, center-weighted, center spot Video Recording Format Full HD: 1920 x 1080p at 25 fps File Format H.264 compressed Connectivity Mini HDMI3.5mm microphone in3.5mm headphone out Flash External Flash Connection Hot shoe Max Sync Speed 1/2000 sec Flash Control Automatic TTL center-weighted system, Nikon-compatible hot shoeFlash Exposure Compensation: -3 to +3 EV Viewfinder/Display Viewfinder 2.36 MP XGA Electronic Viewfinder Display 3.0" 920k-dot touchscreen LCD24-bit color Histogram Yes; on rear display Connectivity/System Requirements Connections USB 3.0 Type-C connectorMini HDMI3.5mm audio in3.5mm audio out Wi-Fi Built-in; 802.11a/b/g/n System & Software Requirements PhocusMac OS X 10.10 or laterWindows 10, 8, 7 (64-bit) Power Battery Type Rechargeable lithium-ion battery (7.2 VDC, 3200 mAh) Physical Operating Temperature 14 to 113F / -10 to 45C Dimensions 5.9 x 3.9 x 2.8" / 150 x 98 x 71 mm Weight 25.6 oz / 725 g with battery Packaging Info Package Weight 8.0 lb Box Dimensions (LxWxH) 10.4 x 9.5 x 9.4" Thousands of digital cameras, lenses, all kinds of accessories at low prices, Choose from Onecamerastore’s huge selection of DSLR cameras from Canon, Nikon, Sony, Pentax and more. Take your photos to the next level of image quality with a Digital SLR Camera.  If you have question. free feel to contact us.

EGX-400 & EGX-600 Professional Rotary Engravers Roland High Speed Engraving (HSE) DC Servo brushless motors on all axes for unmatched precision Spindle speed up to 30,000 rpm 2D and 3D CNC engraving machine Includes software Optional ADA signage kit available High-Speed Engraving Speeds up Profits The EGX-400 and 600 CNC engraving machines operate at a spindle speed of up to 30,000 RPM and engrave a wide variety of materials, including wood, urethane foam, plastic, acrylic, and light metals such as brass and aluminum. This speed and versatility of materials offers you amazing potential for applications and profit.   Distinguishing Features 2D and 3D Engraving 30,000 rpm spindle for high torque and low vibration Digital AC Servo brushless motors on all axes Engraving software included Optional ADA Signmaking Kit available 2-Year Trouble-Free Warranty Power Forward with Speed and Efficiency The EGX Pro series owes its amazing speed and precision to digital AC Servo brushless motors on all axes and Feed Forward Processing (FFP). The servomotors generate plenty of torque for smooth, fast engraving, while FFP technology anticipates tool paths for outstanding accuracy and energy efficiency. Spindle speed can be varied between 8,000 and 30,000 rpm for engraving the widest variety of materials.   Bundled Software Simplifies Engraving 3D EngraveIntuitive program for producing 3D reliefs. MODELA Player CAMProcess DXF and STL files created with popular 3D CAD programs. Virtual MODELA4Simulate finished shapes for previewing on your computer screen before beginning production.Dr. EngraveFeatures include TrueType fonts and an automatic layout function for importing Excel and CSV databases for fast engraving of product serial numbers, nametags and for entire door-numbering projects. R-Wear StudioQuickly and easily create rhinestone templates for profitable decorated apparel and bag applications. R-Wear Studio includes a library of 500 hot-fix rhinestones and a job cost display, allowing you to calculate profits and manage rhinestone inventories.    High Productivity Features The EGX Pro offers multicast capability that allows you to connect multiple EGX engraving machines together and control the entire production process in-house with an application, maximizing your investment and resources. A removable memory card stores programmed files for repeat jobs without tying up your computer, while a separate teaching feature sends operating commands directly from the control panel to the machine. Commands can be saved in the built-in memory or on the memory card.   Unmatched Reliability and Support The EGX Pro is built with superior Roland DG design and manufacturing, to give you years – and even decades – of reliable service. Unmatched customer service and technical support, including a comprehensive Two-Year Trouble-Free Warranty come standard. Roland DG international ISO certifications are your guarantee of superior quality.   MODEL EGX-400 EGX-600 Max. cutting area 16"(X) x 12" (Y) x 1.57" (Z)(407 mm (X) x 305 mm (Y) x 42.5 mm (Z)) 24" (X) x 16" (Y) x 1.57" (Z)( 610 mm (X) x 407 mm (Y) x 42.5 mm (Z)) Acceptable material thickness 1.575" (40 mm) XYZ motor AC servo motor (DAC-FFP) Feed rate XY-axis : 0.5 mm/sec. , 1~100 mm/sec. Z-axis : 0.5 mm/sec., 1~50 mm/sec. Acceleration 0.1 G , 0.05 G Software Resolution .00039"/step (0.01 mm/step) Mechanical Resolution XY-axis : .0001"/step (0.003 mm/step) Z-axis : .00009"/step (0.0025 mm/step) Spindle motor DC brushless motor Max. 72 W Revolution Speed 8,000 - 30,000 rpm Tool chuck Cutter holder or Collet system Positioning accuracy ± 0.1 % of distance traveled, or ± .0039" (0.1 mm), whichever is greater (Under no-load conditions) Repeat accuracy .0020" (0.05 mm) Display Liquid crystal display unit (with back light) Control Keys MENU , ENTER / PAUSE , SPINDLE , XYZ ORIGIN SET , XYZ Cursor , FAST FEED , COPY , Dial Interface Parallel (in compliance with the specification of Centoronics) Serial (under RS-232C standard) , External connector 1 , External connector 2 Buffer size 2 MB Power Supply 100 , 117 , 230 , 240 V ± 10% Power Consumption 350 VA Dimensions 31" (W) x 28" (D) x 20.5" (H) (795 mm (W) x 719 mm (D) x 521 mm (H)) 39" (W) x 32" (D) x 20.5" (H) (995 mm (W) x 820 mm (D) x 521 mm (H)) Weight 112 lb (51 kg) 141 lb (64 kg) Operation Environment Temp: 41° - 104° F (5° - 40° C) Humidity: 35 to 80% (no condensation) Accessories Control panel , Control panel cable , Power code , Nose unit ,Solid collet (φ4.36 mm) , Clamp , Spanner (17 mm , 10 mm),Hexagonal screw driver , Hexagonal wrench ,Roland Software Package CD-ROM , User's manual

The Smarky machine is a flexible and economic laser system for marking plastic and any type of metal material. This high quality marking laser allows you to engrave names, logos and inscriptions as well as transfer photographic images onto metal. The Smarky laser source gives you the possibility to mark on a working area of 17”L X 13.4”W X 4.6”H. This compact & flexible system is ideal for class 1 applications. The Sisma Smarky comes equipped with the SLC Sisma software.Laser PARAMETERS:Technical Characteristics: SMARKY • Laser Source: Nd: YVO4• Wave Length: 1064 nm• Power Supply: 220V• Output Power: 10W• Dimensions: (W X D X H) 20.5” X 23.6” X 24.4”• Marking Area: 4.3” X 4.3” X 4.6” Tall• Cooling System: Air• Engraving materials: Engraves on all metals & plastic• Weight: 207 lbs (94 kgs)• Focal: F160mm• Working Area: 17”L X 13.4”W X 4.6”H• 24 month manufacturers warranty

Esaote MyLab ClassC Multipurpose ultrasound Whenever doctors think of high-level cardiovascular and general imaging ultrasound systems, they ask for up-to-date platforms, with high-performance and advanced on-board technologies as well as simplicity and ease of use. MyLab ClassC has been designed based on these key concepts in order to deliver a reliable diagnosis, and to ensure every day productivity. Prevention and quantification are easily available with a touch: the prevention suite with RF-QIMT, RF-QAS, XStrain™, CFI advanced technologies and state-of-the-art iQ Probes allows the best clinical approach to diagnoses.With just one glance you will understand how MyLab™ClassC‘s simplicity has never been seen before on such a high-level ultrasound scanner. The new MyLab™ClassC’s ergonomics led to a compact and agile system, easy to move and able to adapt to any kind of environment, including the most critical ones such as interventional and operating rooms.  The height-adjustable and rotating keyboard, as well as the multiplane-articulated monitor arm, allow for optimal positioning at all times.Optimal lighting is a crucial factor for ultrasound imaging.The latest Widescreen LCD Monitor Technology allows images to be clearly displayed under any condition. MyLab™ClassC also introduces an additional unique feature, Opti-Light, which allows the user to control the room lighting level directly from the system, through the specially designed controls located on the touch screen. The large high-quality touch screen is well positioned near the most important working area of the control panel, allowing all mode-dependent parameters to be clearly displayed and changed with one simple touch: optimized working conditions, better users’ comfort and improved patient care.Features- TEI™ - Tissue Enhancement Imaging- CMM - Compass M-Mode- XMM – eXtended M-Mode imaging for superior image quality- XView - eXtreme View with real-time adaptive algorithm  - advanced CnTI™ - Contrast Tuned Imaging for contrast media procedures- XStrain™ - Strain-Strain Rate top analysis technique for myocardial function evaluation- TVM - Tissue Velocity Mapping for LV motion analysis- CFI - Coronary Flow Imaging to assess coronary artery blood flow and its main characteristics- DIR X-Flow - extreme sensitivity and flow direction information- AutoEF - Automatic Ejection Fraction computation - integrated stress echo- advanced Cardiac and Vascular packages- MView - combined standard and steered ultrasound imaging to detect all anatomical structures- Tp-View for enlarged field of view, specially in breast and vascular exams- RF-QIMT & RF-QAS - Quality Intima Media Thickness for early detection of cardio-vascular diseases & Quality Arterial Stiffness for early detection of cardio-vascular diseases- high definition CFM- Virtual Navigator advanced tool for Fusion imaging (US & CT/MR)- IP - Intelligent Positioning system in Virtual Navigator modality to define US target at best- ViewFinder - accurate verification/anatomical structure evaluation during tuning phase in Virtual Navigator modality- Virtual Biopsy to support biopsy needle path during percutaneous procedures- 4D biopsy guidance to improve biopsy procedures reliability- ElaXto-Elastosonography - non-invasive method to assess tissue elasticity- X4D real-time technology for eXtended 3D-4D advanced OB/GYN imaging in volumetric scanning- 3D-4D VRA Counting - automatic hypoechoic spherical target volume measurements & counting- 3D Panoramic to create a 3D extended view by merging acquired volumes- VPan - eXtended field of view- PBI - Pure Brilliance Imaging to optimise and enhance image quality- wide-view high image quality touch screen with mode-dependent parameters settings- direct access to standard and advanced modalities- flexibility of use in an easy-to-move, compact and agile system- superior image quality with unmatched high-frequency range- optimal lighting room level with Opti-Light advanced feature (optimized lighting)- dedicated intelligent and intuitive interface/setting- automatic optimization of image processing to improve the operator's comfort- diagnosis oriented workflow: easy, fast and reliable access to diagnoses- wireless networking for easy data sharing, storage and printing- remote archive, review, report, back-up- up-to-date connectivity and data management solutions (wireless, LAN, integrated database)- Windows® and DICOM compatibility- IHE compliance (Integrating the Healthcare Enterprise)- MyLab™Desk software package for image management solution- up-to-date 19" widescreen high-resolution TFT LCD colour monitor- extended bandwidth probes & new innovative ergonomic shape (Appleprobes)- height-adjustable and rotating keyboard- probe and ECG cable guide, dedicated sterile and customizable probe holders- extra working space with multi-direction articulated movement- monitor orientation and articulated arm, printer support, connectors holders, insulated power supply- 4 swivelling wheels with single brakes

Automatic Perimeter Zeiss Humphrey Field Analyzer HFA 3 / 830, NEWIncl. table, printer, keyboard, mouseThe New Humphrey Field Analyzer 3 from ZEISS Sets a New Standard for Efficient Visual Field TestingNew HFA3 offers gold-standard perimetry performance with technological advances – such as automated trial lens correction – that are designed to save time and reduce errors, plus test results equal to and interchangeable with test results from previous Humphrey perimeters.The HFA3 is the first perimeter to introduce patented Liquid Lens technology, which saves time, simplifies set-up and reduces the possibility of human error in trial lens correction. In perimetry, a trial lens provides the refractive correction needed so each patient can see clearly during the test. The HFA3 replaces the old manual process with a patented Liquid Trial Lens™, which automatically delivers the appropriate refractive correction using measurement information entered into the instrument.The HFA3 provides a streamlined and faster workflow with an array of new features designed to:Improve confidence in test results with RelEYE™, which allows doctors to instantly review the patient’s eye position, at any stimulus point. RelEYE data is available on the instrument and when reviewing test results with FORUM® Glaucoma Workplace. It may reveal common testing problems, such as droopy lids (ptosis) or misalignment of the eye relative to the trial lens holder. Save time with an intuitive new SmartTouch™ interface, which reduces the number of steps required for the technician to start a perimetry exam. Faster gaze tracking provides information that helps doctors assess the reliability of test results. The gaze tracker on the HFA3 provides faster initialization and works on a wider spectrum of patients, compared to earlier models of HFA. Make test administration simpler, with an easy-to-use kinetic graphical user interface with a full 180-degree field of view.HFA3 provides a streamlined and faster workflow with an array of remarkable new features designed to:Reduce setup time with a single trial lens. Using liquid pressure, the new Liquid Trial Lens™, instantly delivers each patient's refractive correction, with the touch of a button.Save time with an intuitive new SmartTouch™ interface that helps to shorten chair time.Accelerate clinic flow with equipment that can be learned quickly and operated easily.Improve confidence in visual field test results with RelEYE™. Instantly review the patient's eye position, at any stimulus point.Gain peace of mind with seamless transferability of legacy data from the HFA II and HFA II-i to HFA3.Easy to use kinetic graphical user interface with full 180° visual field testing range.Liquid Lens technology: One lens, less timeThe new automatic Liquid Trial Lens reduces patient setup time by automatically loading the patient’s refractive correction from their previous exam. The result is faster patient flow and reduced chance of error when selecting a lens during test setup.SmartTouch interface: Ready, set, test!The new HFA3 platform gets you up and running with fewer touches – simply select the patient’s name and press Start, all using an all-new color graphic user interface.Exclusive gaze tracking: On track? Know right nowSave time with improved gaze tracking initialization.Kinetic Perimetry: Significant advancementsEasy to use kinetic graphical user interface with full 180° testing range.HFA review with FORUM Glaucoma Workplace from ZEISSReview quantitative and qualitative information from all standard HFA analyses, in an easy-to-read formatChange baselines and capture, track and measure progression simply and easily with Guided Progression Analysis™ (GPA™)Use RelEYE to preserve an image of the patient’s eye at every stimulus presentation during a SITA™ Standard testCheck for ptosis or trial lens rim artifacts as well as assess patient's compliance with RelEYE in both GPA and single-field analysis modesWork with either Mean Deviation (MD) or Visual Field Index™ (VFI™)—or bothGenerate HFA reports using a MAC or a PCHumphrey Gold StandardsFor years, the Humphrey Field Analyzer has brought certainty to glaucoma diagnosis. As the gold standard of perimetry, it is a critical diagnostic partner in thousands of practices. HFA delivers the interactive analysis you need, when and where you need it.Visual Field Index (VFI) – VFI is a simple and intuitive global index. Its most powerful application is GPA, which trends VFI over time to project remaining vision.GPA Alert – A message in simple language that indicates whether statistically significant deterioration was identified in consecutive visits.STATPAC™ – The language of perimetry, STATPAC compares results to proprietary age normative and glaucoma databases.SITA™ Strategies – Unsurpassed in efficiency, SITA is patient responsive: it learns to perform as fast as the patient.Connectivity – HFA3 connects to other HFA3 and HFA II-i perimeters. For comprehensive connectivity, HFA3 can be connected to FORUM with FORUM Glaucoma Workplace. HFA3 also supports common file folder sharing used by most Electronic Medical Record Systems (EMRs).

Canon Hybrid Fundus Camera CX-1, NEW Complete package consisting of: Fundus Camera CX-1, Canon EOS-60D, high-performance PC, HD monitor and electric motor lift table The CX-1 Retinal digital camera is a digital hybrid retinal camera system with mydriatic and non-mydriatic modes. The inclusion of high-quality diagnostic images is easier and more efficient than ever before. Through simple Pushbutton controls you change modes and regulate the functions and thus offer the patient a comfortable procedures. * Mydriatic and non-mydriatic hybrid digital fundus camera * Non-Myd color shots 45 ° * Myd. Color shots 50 °* Red-Free and Cobalt Filter Shots * Auto-Fluorescence Shots * Flourecence Shots * Easy Operation * Advanced stereo photography with EOS camera technology for unsurpassed Canon imaging 

The Estetica generation takes ergonomics and comfort to a new level.The E70 is based on the revolutionary suspended chair approach, which gives a suprising amount of legroom for both you and your dental team.The dental unit features:- 2x Tubing outlets & LUX coupling 465LRN- 1x KL702 electric micromotor with torque control- Dentist & nurse syringe- Upholstery- Spittoon valve- Kavo LUX 1410C

Ultrasound A / B Scanner & Biometer Tomey UD-8000, NEW! Multifocus and multifrequency B-probe High-resolution touch screen Video sequence recording and analysis Data communication via USB or LAN Docking station for Bio / Pachymeter (AL-4000 optional) UBM 60 MHz B-probe (optional) 

TOPO REF KERATOMETER Tomey Model RT-7000, NEW! * 3 systems in one device * Automatic alignment and triggering * Color touch screen * Various topography views * Electronically controlled chin rest * Joystick orientation * Pupil and corneal-measurement Refractive Power Measurement Spherical Refractive Power (S) Measurement Range -25.00 D to +22.00 D (at VD = 12.0 mm) Display Unit 0.01 D / 0.12 D / 0.25 D Cylindrical Refractive Power (C) Measurement Range 0 D to ± 10.00 D (at VD = 12.0 mm) Display Unit 0.01 D / 0.12 D / 0.25 D Astigmatism Axial (A) Measurement Range 0 ° to 180 °Display Unit 1 ° Minimum Pupil Diameter Ø 2.2mm Vertex Distance 0mm / 12.0mm / 13.5mm / 14.0mm / 15.5mm / 16.0mm Measurement Time 0.2 seconds / single eye Corneal Curvature Measurement Corneal Curvature (K1, K2, AVG) Measurement Range 5.00 mm to 11.00 mm Display Unit 0.01 mm Corneal Refractive Power (K1, K2, AVG) Measurement Range 30.68 D to 67.50 D (n = 1.3375) Display Unit 0.01 D Corneal Astigmatism (CYL) Measurement Range 0 D to 10 D (n = 1.3375) Display Unit 0.01 D Axis Of Corneal Astigmatism (AXS) Measurement Range 0 ° to 180 ° Display Unit 1 ° Measurement Area Cornea Ø 3.0 mm(at 8.00 mm corneal curvature) Measurement Time 0.1 seconds / single eye Measurement Of Corneal Shape Display Range 9 D to 100 D 

Specifications: Featured Usage     Roll to Roll Solvent PrinterColor     Grey & PurplePrinting Resolutions     300, 540, 720, 1080, 1440 dpiMax Print Width     63.3"Max Print Speed     Up to 605 sq/ft/hrMax Media Weight     88lbsMax Media Thickness     1.0mmConnectivity     USB 2.0Power Supply     Single-phase AC 100-120V (AC 220-240V) x3Operational Environment Temperature     35-65% RH (non-condensing)Overall Length     28"Overall Width     108"Dimensions (W x D x H)     108 x 28 x 71 inches (274 x 71 x 145 cm)Weight     408.0000

Hasselblad Flextight X5 Specs Film Types 35mm, Medium Format, 4x5"Reflective (Print) Scanning up to A4 SizeMaximum film scan area up to 100 x 245mm Scan Quality Scan Sensor Linear CCD (3 x 8000 pixels) Optical Resolution 8000 dpi (35mm film)3200 dpi (Medium Format Film)2040 dpi (4x5" Film & Reflective) Hardware Resolution Up to 6300 dpi Interpolated Resolution None Color Depth 48-Bit RGB Dynamic Range 4.9 Focus System Auto Focus Performance Preview Speed Not Specified by Manufacturer Scan Speed 300MB/min.35mm: 1.55 minutes60mm: 1.10 minutes4" x 5": 1.23 minutes Batch Scanning Yes (up to six images depending on film format and holder used)Optional Batch Feeder (up to 60 frames) or Slide Feeder (up to 50 slides) Automation Auto frame detectionFlexTouch dust removal Connectivity Computer Interface FireWire System & Software Requirements Windows 2000 and XP; Mac OS X+ Screen resolution of 800 x 600 pixels with true colors (24-bits) Mouse or other pointing device FireWire interface Physical Light Source Cold Cathode Lamp Power Requirements 100-240V AC, 50-60Hz Dimensions (WxHxD) 15.4 x 25.6 x 9.1" (390 x 650 x 230mm) Weight 55 lbs (20.5kg) Packaging Info Package Weight 59.5 lb Box Dimensions (LxWxH) 31.0 x 20.0 x 17.0"