Ventilation equipment in bulk on Qoovee

Radial fans of VRK.G type are used in exhaust ventilation systems of industrial and public buildings. General-exchange fans are designed to move air or other non-explosive, non-aggressive gas mixtures with temperatures up to plus 70 ˚С, free of sticky substances and fibrous materials, with a concentration of dust and other solid impurities not exceeding 100 mg / m³. VRK.G fans are also presented in corrosion-resistant and explosion-proof versions.

Radial fans of VR.80 -75 type are used in supply and exhaust ventilation systems of industrial and public buildings. Designed to move air or other non-explosive, non-aggressive gas mixtures with temperatures up to +70 ° C, free of sticky substances and fibrous materials, with a concentration of dust and other solid impurities not exceeding 100 mg / m³. Also fans VR.80-75 are presented in explosion-proof and corrosion-resistant versions.

Radial smoke exhaust fans of VRD.80-75 type are designed to remove high-temperature smoke-air mixtures arising during a fire and simultaneously remove heat outside the serviced room. The fan is used in exhaust (emergency) ventilation systems of industrial, public, residential, administrative and other premises (except for categories A and B of explosion hazard according to NPB 105-03) to remove smoke-air mixtures formed during a fire with a temperature of up to +400 ° C or up to + 600 ° C for 120 minutes. It is possible to use fans in general ventilation systems of industrial, public, residential, administrative and other premises for moving air or other non-explosive, non-aggressive gas mixtures with temperatures up to + 70 ° C, free of sticky substances and fibrous materials, with a concentration of dust and other solid impurities no more than 100 mg / m³, with reduced rotation frequency no more than 50%.

Rectangular duct fans (VKT) are used in supply and exhaust ventilation systems for industrial and public buildings. The fans are designed to move air or other non-explosive, non-aggressive gas mixtures with temperatures up to +40 ° C, free of sticky substances and fibrous materials, with a concentration of dust and other solid impurities not exceeding 100 mg / m³. Climatic modification of fans U2 in accordance with GOST 15150-69 (ambient temperature from -30 ° C to +40 ° C). In the place where the fans are installed, the root mean square value of the vibration velocity from external sources of vibration should not exceed 2 mm / s. The degree of protection provided by the sheath is IP44.

The # 1 company in Kyrgyzstan providing fogging systems. We have the best outdoor cooling technology! Thanks to the uniqueness of the systems and high optimization, we have already implemented more than 110 large-scale projects in Kyrgyzstan. Due to the certified quality of fogging systems Tuman.kg, customers receive a 6-year warranty for the installed equipment (3 years of equipment warranty and 3 years of free service). The main direction of the company is the cooling of summer terraces, cafes, restaurants, gazebos, production facilities, etc. Artificial fogging systems are the surest and most advanced way to combat unwanted odors, dust and sultry heat in open spaces. Fogging technologies allow you to control the air temperature, create an atmosphere of the desired coolness, as well as completely cut off dust and allergens contained in it. The company has been providing services since 2012. Over the years, the systems have proven their functionality, and the company's employees have proven their professionalism. Our clients: Teahouse "Vostochka" Cafe "Koreana Family" Uncle Tom's Cabin Cafe Restaurant "Furusato" Restaurant "Navigator" Chaikhana "Bukhara" Coffee shop "Vannilla sky" Continental Restaurant Time out restaurant Confectionery "Our mark" Cafe "Red Fox" Cafe "Diyar" Restaurant "Arzu style" Cafe "Kaganat" Restaurant "Arzu" (Lebedinovka) Restaurant "Talisman" Restaurant "Ulu Too" Cafe "Rublevka" (Kordai) Teahouse "Omar Khayam" BC "Beren Gold" Restaurant "Villa V Club" Hotel "Jannat" Restaurant "Skullcap" Barbecue "Caucasian yard" Cafe "Aist" Cafe "Veranda" Cafe "Shafran" Wine restaurant "Vinoteka" Oculus Cocktail Bar Teahouse "Teahouse No. 1" Beauty salon "Success" Cafe "Jasmine" Cafe "Arabeska" Cafe "Santa" Gastropub "Street Myasnaya" Cafe "Kleo" Coffee shop "Gloria" Cafe "Fakir" Cafe "Joma" "Barbecue No. 1" Bazaar "Ak Emir" Cafe "Odnoklassniki" Cafe "Ozhak Kebab" Cafe "Di 2" Coffee house "Bagel" "Golf Club" Bar "Pinta Pub" Coffee house "Panda" Restaurant "Bravo" Cafe "Merci Baku" "Barclays Pub" Hotel "Ambassador" Cafe "Aura" Restaurant "Veslo" Cafe "Khoja Nasreddin" Cafe "Saksaul" Restaurant "Prego" "Live Bar" BC "Ordo" Cafe "Ugolyok" Teahouse "Aladdin's Lamp" "Neo Med" Cafe "Ormon Khan" Farms Mycelium Greenhouses Disinfection Disinfection tunnel

Founded in 2008, Taizhou Beierde Electromechanical Technology Co., Ltd is a professional China Booster Pipe Fans Manufacturers and Booster Pipe Fans factory,which specializing in various AC servo motors and axial flow fan rotors.We have been continuously increasing capital investment and introducing advanced equipment, production technology, and management experience. Now we have a full set of production equipment and testing equipment, All products have passed the National Compulsory Product Certification (3C) and the EU Compulsory Product Certification (CE),we established a comprehensive service system and won widespread praise and trust with high-quality wholesale Booster Pipe Fans and satisfactory after-sales service. We have been making persistent efforts on the basis of the original to create a brilliant future

FujiPlus Air Curtains are produced to meet customer needs in any environment.

FujiPlus Sakura Series is sold as Inverter models 9000BTU / 12000BTU / 18000BTU / 24000BTU. Our products are pioneers in both price and quality.

FujiPlus Cassette Type air conditioners are produced to meet your needs in any environment.

FujiPlus living room type air conditioners are among the leading products in the world in terms of price performance. 42000BTU and 48000BTU On / Off are sold as Inverter. Different pricing is applied according to different capacities.

Is specially designed for automation mechanical equipment to adjust speed ,protect and save energy ,can be widely used in food packing machinery, textile machinery, woodworking machinery ,reflow welding lines ,fans, water pumps.

Airtech Kinetic Blower (AKB) Series are dynamic blowers that transfer kinetic energy to the medium agent by a contactless rotating impeller. The gas is drawn in by a high-performance titanium turbo impeller. The minimized internal losses lead to extremely high efficiencies and silent compression at rotational speeds up to 12,500 RPM. The position of tangential inlet and outlet can be selected individually according to the needs of the application. The reliable IE4/NEMA super premium blower motors are also available with integrated plug and variable frequency drive.  

Installed to efficiently and quickly remove vapors from sources of high levels of odor, gas, grease and moisture. Made of stainless steel AISI 304, AISI 430 or galvanized steel.

Designed for air distribution in ventilation, air conditioning and air heating systems of all types of premises. Made of lightweight aluminum alloy and durable construction.

Manufactured with a standard length of 1250 mm from cold rolled steel with a thickness of 1-1.5 mm.

It is manufactured in standard lengths of 1.25 or 1.5 meters from galvanized steel with a thickness of 0.5-1.0 mm. By special order, it is possible to manufacture air ducts from stainless steel, from steel 1.2 mm, of any section.

Differs in increased rigidity, tightness, air tightness. Made of galvanized steel 0.5-1.0 mm. It is possible to manufacture in lengths from 100 mm to 12000 mm on request.

It is used in supply and exhaust ventilation systems for industrial and public buildings. Designed to move air or other non-explosive, non-aggressive gas mixtures with temperatures up to + 70 ° C, free of sticky substances and fibrous materials, with a concentration of dust and other solid impurities not exceeding 100 mg / m3.

It is used in supply and exhaust ventilation systems for industrial and public buildings. Designed to move air or other non-explosive, non-aggressive gas mixtures with temperatures up to +40 ° C, free of sticky substances and fibrous materials, with a concentration of dust and other solid impurities not exceeding 100 mg / m3.

Ventilation grilles (outdoor, floor, facade, wall) of any size, including non-standard configurations. Material: metal, galvanized and stainless steel, plastic. Grid types: adjustable and unregulated.

Inspection hatches (with a magnetic handle, lock or push-button) of any size, including non-standard configurations. Material: metal, galvanized and stainless steel, plastic. Construction type: welded, no welding, injection molding. 

Designed for use Category I ** with a volume of 240 m3 or an area of up to 90 m2 Category II ** with a volume of 250 m3 or an area of up to 95 m2 III category ** with a volume of 270 m3 or an area of up to 100 m2 IV category ** with a volume of 290 m3 or an area of up to 105 m2 with a ceiling height of 2.7 m to prevent level rise microbial contamination of the air Capabilities: Continuous operation Power consumption, no more than 90 W UV curing power, 37.8 W Number of UV lamps, pcs. 3x30 W Overall dimensions, mm. 280x140x980 ± 5% Weight, net, kg 6 ± 0.3 Noise level, no more than 40 dBA Placement method suspended / mobile * Ozone-free UVC 30 W G 13 lamp Service life: 10800 hours

Designed for use Category I ** with a volume of 120 m3 or an area of up to 45 m2 Category II ** with a volume of 130 m3 or an area of up to 50 m2 III category ** with a volume of 150 m3 or an area of up to 55 m2 IV category ** with a volume of 170 m3 or an area of up to 60 m2 with a ceiling height of 2.7 m to prevent level rise microbial contamination of the air Capabilities: in continuous mode Power consumption, no more than 45 W UV curing power, 14.7 W Number of UV lamps, pcs. 3x15 W Overall dimensions, mm. 280x140x575 ± 5% Weight, net, kg 4 ± 0.3 Noise level, no more than 40 dBA Way of placement suspended / mobile Ozone-free UVC 30 W G 13 lamp , Lifetime: 10800 hours

Installation of devices at the stage of construction of new facilities and during repair work in finished buildings does not require special preparation and is very simple. To begin with, holes 230-240 mm in diameter are drilled in the wall with a slope of 1% to the external facade. Then, system enclosures are inserted into these holes, which are connected to the Twist controller, according to the attached diagram. Now fresh air without energy loss is already a reality!

Ventoxx Champion is a standard ventilation unit with a simple design and medium power ratings. The optimal combination of price and quality makes this model the absolute champion in the number of regular sales for many years. Ventoxx Champion is equipped with a German-made ceramic heat exchanger capable of providing heat recovery efficiency of up to 86%. These performance indicators of the recuperator are confirmed by testing results in an independent laboratory in Germany and are supported by relevant test reports. The Ventoxx Champion recuperator operates at temperatures ranging from -20 ° C to + 50 ° C and can withstand any weather conditions. In total, 11 programs and 3 work speeds are provided. The maximum volume of air that the recuperator is able to pump is 60 m³ / h. The peak power consumption of the device is 4.6 watts. The maximum noise level of the device is only 43 dB.

The Ventoxx Comfort recuperator is completed with: Plastic shell 300 mm - 1; External metal cover - 1; Internal cover - 1; Cartridge with thermal battery and fan - 1; Filter class G3 - 1; Office Twist - 1; Mounting the outer cover; Warranty Card; Instruction Ventoxx Comfort is designed for 17 operating modes and 5 speeds that regulate the different volume of ventilated air depending on the needs of the owner. The recuperator is controlled using the Ventoxx Twist device, which can be installed in the wall in any place convenient for the client. Intuitive controls can simultaneously control the operation of several recuperators (up to four). The relay allows you to select the mode and speed of operation, which are displayed using light diodes. The Ventoxx Comfort model is used both in the construction of new residential buildings and in the reconstruction of secondary housing. This ventilation device can be used in rooms for various purposes. Like the other recuperators in our range, Ventoxx Comfort has a sleek design that blends equally well with any style of interior.

EXW from 26,22 Euros Please, send you requirement to  

Cooling pad: padding area made of corrugated paper, depth 60 mm, thickness 15 cm X60 groove height 150 cm Corrugated paper 60 mm deep and 10 cm thick X60 groove height 100 cm

Internal circulation fans transport moisture. Needs instant computer control. It should be able to be automatically controlled with. The circulating fan will be used throughout the entire greenhouse. Material: Stainless steel housing, wires and casing Metal 0.35 kWh : 1400 rpm Air flow: 5,700 m 3 / h Equipment: hanging chains and link Certificate: CE Standards

The ventilation outlet "Kronoplast" KBN is used in roofs made of metal tiles with a low profile - Monterey and Supermonterey. The outlet is designed to provide ventilation of the premises, connecting the sewer outlet, kitchen hoods.

Exhaust grille R-25 is used in forced and natural ventilation systems, it is used to design the inlet / outlet of the ventilation duct. The standard white color allows it to fit into any design. Louvers provide airflow at an optimal angle, protect from dust and debris. The dimensions of the product are 200x250 mm, it is made of ABS plastic, fixed with glue or with screws. Advantages: 1. low price; 2. attractive appearance; 3. Easy assembly and disassembly.

Exhaust grille R-20 is used in forced and natural ventilation systems, it is used to design the inlet / outlet of the ventilation duct. The standard white color allows it to fit into any design. Louvers provide airflow at an optimal angle, protect from dust and debris. The dimensions of the product are 200x200 mm, it is made of ABS plastic, fixed with glue or with screws. Advantages: 1. low price; 2. attractive appearance; 3. Easy assembly and disassembly.

Exhaust grille R-15 is used in forced and natural ventilation systems, used to decorate the inlet / outlet of the ventilation duct. The standard white color allows it to fit into any design. Louvers provide airflow at an optimal angle, protect from dust and debris. Product dimensions 150x150 mm, fastened with glue or with screws. Advantages: 1. low price; 2. attractive appearance; 3.Easy assembly and disassembly.

Plastic ventilation grill - round perfect for covering holes in the wall, in the ceiling or for closing the ventilation duct Made of high quality ABS material. Environmentally friendly, durable. For connection to round 315 mm air ducts, mounting with a mounting flange

Plastic ventilation grill - round perfect for covering holes in the wall, in the ceiling or for closing the ventilation duct Made of high quality ABS material. Environmentally friendly, durable. For connection to 200 mm round ducts, mounting with a mounting flange

Plastic ventilation grill - round perfect for covering holes in the wall, in the ceiling or for closing the ventilation duct Made of high quality ABS material. Environmentally friendly, durable. For connection to 125 mm round ducts, mounting with a mounting flange