All Vehicles & parts suppliers from Russia
Sort by:
ИП Шмельков А.А
Russia
USD
13.99/pcs
ООО ПКФ ПРОТЕМ
Рыбинск, Russia
Specify the price
ООО ПКФ ПРОТЕМ
Рыбинск, Russia
Specify the price
ООО ПКФ ПРОТЕМ
Рыбинск, Russia
Specify the price
It is intended for obtaining solder rods by the method of continuous pulling upward of casting billets from copper melt and cutting them into dimensional cuttings. Consists of: pulling stand of two-roll type, operating in step-by-step mode from one drive with the possibility of individual pressing of each workpiece at two points; molds mounting brackets; carts for manually moving metal receivers; devices for cutting bars into measured lengths; common installation frame; machine control system, including cabinet and control panel. Smelting furnaces are not included in the scope of delivery.
ООО ПКФ ПРОТЕМ
Рыбинск, Russia
Specify the price
Designed for punching grooves and holes, punching perforation corners in metal sheets. It is possible to use combined dies for simultaneous punching of grooves and holes. Can be completed with a feeder, table, roller conveyor. To operate the presses, a compressed air line under a pressure of 0.7 MPa is required. Control from a pedal or according to a technical assignment from two buttons simultaneously. The presses can work autonomously or as part of a line.
ООО ПКФ ПРОТЕМ
Рыбинск, Russia
Specify the price
Designed for simultaneous punching of 4-corner segments in the shelves of a U-shaped profile, punching a tongue and punching holes for further connection of the ends of the profile into a frame. They consist of: a rigid frame on which the press blocks with stamps are mounted, an additional movement mechanism, a device for removing cut profiles, hydraulic equipment, which includes a hydraulic station, an electrical cabinet with a control panel. The blank of the U-shaped profile is installed manually on the dies and positioned along the stops. After performing all operations, the profile is automatically removed from the installation.
ООО ПКФ ПРОТЕМ
Рыбинск, Russia
Specify the price
ООО ПКФ ПРОТЕМ
Рыбинск, Russia
Specify the price
Designed for firing ceramics and other materials. They consist of a bed, a casing, a heating chamber, lining with refractory and heat-insulating materials, an electrical cabinet. Control from a stand-alone console. Heating of the furnace is electric. The heating chamber has three heaters: two heaters at the sides and one heater at the bottom of the furnace. Coil heaters are attached to ceramic tubes. Heater material - fechral Ø 4 mm.
ООО ПКФ ПРОТЕМ
Рыбинск, Russia
Specify the price
Designed for firing ceramics and other materials. It consists of a bed, a casing, a heating chamber, lining with refractory and heat-insulating materials, an electrical cabinet. Control from a separate control panel equipped with a microprocessor-based temperature control system in the furnace. At the request of the Customer, the furnace can be equipped with an electromechanical drive for the bogie hearth.
ООО ПКФ ПРОТЕМ
Рыбинск, Russia
Specify the price
Designed for firing powder materials. They consist of a lined heating chamber, inside of which a pipe, heated by silite heaters, rotates, a loading device and a control panel. The pipe is supported by four support rollers and a chain drive. The loading device is installed on support wheels with which it can be rolled away from the furnace in case of repair. The inclination of the furnace towards the unloading side can be changed within the range from 0 to 3 ° C. The work is controlled from the console. The gases formed during the firing of powders are sucked off through a branch pipe connected to the shop ventilation system.
ООО ПКФ ПРОТЕМ
Рыбинск, Russia
Specify the price
Designed for drying bulk materials in various industries: chemical, construction, paint and varnish, powder metallurgy, etc. Hot air supplied to the drying zone from a heat generator is used as a heat carrier. Evaporation products are removed through an air duct, which is connected to the workshop exhaust ventilation through a branch pipe. The characteristics of the drying drum can be changed for the technological tasks of the Customer's production. On request it is completed with a heat generator of any type. Electric or gas, rated thermal power of gas heat generators from 0.315 MW. The installation includes: frame, drum, support station, drive station, loading bunker, unloading bunker.
ООО ПКФ ПРОТЕМ
Рыбинск, Russia
Specify the price
ООО ПКФ ПРОТЕМ
Рыбинск, Russia
Specify the price
Designed for mixing and granulating powder materials. Consists of • an inclined rotating mixing chamber; • high-speed granulating head; • nozzles for binder injection; • scraper tool for dumping the mixture from the wall and bottom of the chamber, preventing sticking; • pneumatic cylinder for opening the bottom unloading valve; control systems. The rotation speed of the mixing chamber and granulating head is regulated by a frequency converter, the time of the mixing, granulating and unloading process is set by a timer for each operation. Loading is carried out manually through the fitting with the chamber closed. Unloading through the bottom hatch. Units and parts in contact with the processed product are made of stainless steel. Various versions are possible both in size and in materials used.
G2R
Russia
USD
50700.0/pcs
We offer Injection molding machine of the PD-208-KX series! Profitable!
Specifications:
• Model: PD-208
• Injection weight, gr: 531
• Injection volume, cm3: 577
• Form stroke, mm: 470
• Distance between columns, mm: 510 * 510
Parameters of the received products (boxes):
• Dimensions, mm: 400 * 300 * 110
• Weight, kg: 0.205
• Execution: perforated
• Material: polypropylene
The price is indicated taking into account delivery to the Russian Federation, at the rate of $ 1 = 67.01 rubles. We deliver to the Russian Federation and the CIS countries. We will send a commercial offer upon request. For all questions, write and call - we will be glad to cooperate with you
G2R
Russia
USD
102000.0/pcs
We offer a pallet production line! Profitable!
This line uses waste wood, bamboo, shavings and furniture factory waste. The product is obtained through crushing, drying and the addition of glue, then all this is hot pressed.
Features:
• High temperature, high pressure, pallet pressing done in one go, standard size, no metallic material.
• Pallets can be used in export packaging
• Reasonable structure design, high performance.
• According to European standard, biodegradability.
• Waterproof, insect and termite resistant.
• High strength, no deformation and can be reused.
• Can be split from four directions, easy to use.
• Storing on top of each other, economical, easy to transport.
• Light weight, beautiful shape.
The price is indicated at the rate of 1 $ = 67.01 rubles. We deliver to the Russian Federation and the CIS countries. We will send a commercial offer upon request. For all questions, write and call - we will be glad to cooperate with you!
G2R
Russia
USD
1970.0/pcs
We offer a gas reducer! Profitable!
Used for a gas generator, walk-behind tractor or motor pump. It is stationary, the operator decides what type of fuel to use: gasoline, main gas (methane), propane or eco-gas.
To switch the gas generator, walk-behind tractor or motor pump to the selected type of fuel, just turn the lever.
The biggest advantage of the gearbox is the economy. Gas is much cheaper than gasoline, which allows reducing fuel costs by up to 50% - if it is propane and up to 90% - if it is methane, when using biogas - up to 100%.
Another important advantage of a gearbox for a gas generator, walk-behind tractor or motor pump is environmental friendliness.
Price:
1970 rubles - reducer
290 rubles - repair kit
The price is indicated at the rate of 1 $ = 67.01 rubles. We deliver to the Russian Federation and the CIS countries. We will send a commercial offer upon request. For all questions, write and call - we will be glad to cooperate with you!
G2R
Russia
USD
34500.0/pcs
We offer an automatic contactless car wash complex! Profitable!
The most modern, efficient and economical car wash complex. The only manufacturer that provides a 3-year warranty. The structure of the sink includes support racks, guide rails, head washer, built-in automatic drying system, decorative lighting, payment terminal, pump station, control cabinet, a set of sensors and connecting pipes.
Specifications:
• Installation length: 7600 mm
• Mounting width: 3600 mm
• Mounting height: 3350 mm
• Dimensions of the pumping station: 1250 * 700 * 600 mm
• Unit power: 380V / 22 kW, 50/60 Hz
• Maximum current: 80A
• Total power: 22 kW
• Power of the pumping station: 18.5 kW / 15 kW
• Power of drying fans: 20.5 kW (11000 Pa, 23000 m3 / h
• Controller: Industrial controller
• Water consumption: 65 l / car (express wash), 100 l / car (standard wash)
• Shampoo consumption: 10-40 ml / machine
• Wax consumption: 18.5 l for 1000 cars
• Power consumption: 0.52 kW * h / machine (express wash), 0.99 kW * h / machine (standard wash)
The price is indicated at the rate of 1 $ = 67.01 rubles. We deliver to the Russian Federation and the CIS countries. We will send a commercial offer upon request. For all questions, write and call - we will be glad to cooperate with you!
G2R
Russia
USD
379700.0/pcs
We offer a vegetable washing machine! Profitable!
The DMG U-shape polishing machine is designed for the finishing preparation of fruits and vegetables. During the polishing of the product, all contamination is removed from its "pits". After polishing, the clean product is sent to the bulkhead and dried. The additional DMG polish can be equipped with a water recirculation system.
Those. characteristics:
• Model: DMG 1500
• Number of rolls: 9
• Productivity: 800 - 1000 kg / h
• Material: stainless steel
• Dimensions: 2300 * 900 * 1050
• Motor power: 2.2 kW
• Power supply: 380 V
The price is indicated taking into account delivery to the Russian Federation, at the rate of $ 1 = 67.01. We will send a commercial offer upon request. We work directly with the manufacturing plant without intermediaries, without extra charges. For all questions, write and call - we will be glad to cooperate with you!
G2R
Russia
USD
3350.0/pcs
We present to your attention the equipment necessary for the processing of agricultural animal waste - Manure Separator-220!
This separator left in October 2018 for Kyrgyzstan, Bishkek, which means that we can easily make delivery not only across the Russian Federation, but also to the CIS countries.
Separator benefits:
- The separator auger has high quality 304 stainless steel blades.
- high level of dehydration
- easy operation (just press one button to start and stop work)
- low power consumption
- suitable for continuous work.
- the dehydrated mass at the exit is practically odorless. Later it can be used as a basis for fertilizers.
Specification:
Country of origin China
Model 220
Uptime 20 hours
Engine power 7.5 kW
Maximum moisture content before processing 90%
Moisture content in solid after processing 35-55%
Chicken manure productivity 5-7 m3 / h
Overall dimensions, 2000x800x1700
Weight 680 kg
Price including delivery to the Russian Federation, excluding VAT, at the rate of $ 1 = 67.18. We will send a commercial offer upon request. We work directly with the manufacturing plant without intermediaries, without extra charges. For all questions, write and call - we will be glad to cooperate with you!
Диана мех
Russia
USD
6.28 - 7.42/pcs
COMFORTABLE FUR COATS - SEASON'S TREND ⠀ Sale of fur wraps throughout the Russian Federation. Deliveries directly to the factory. Lowest price and best quality in Russia. High seasonal demand. Delivery from 2 days. Retail at a 110% mark-up. they fade and do not slip on the seat. When buying wraps, we prepare and provide a personalized customized landing page with a high CTR absolutely free. Prices: From 20 to 60 pcs. - 650 rub. From 61 to 90 pcs. - 600 rubles. From 91 to 130 pcs. - 550 rub.
G2R
Магнитогорск, Russia
USD
1.08 - 10784.31/pcs
Own production of tracks, chains, wheels, rollers for bulldozers of Russian, Chinese and Japanese production: T-170, DT-75, Shantiu, Komatsu, Caterpillar, as well as for crawler excavators EO, Hitachi, Hyundai, etc. What gives us opportunity to sell you at the lowest price on the market. We can make track chains for tractors in 203 and 216 mm increments.
We can carry out individual orders - tracks and chains on request of the customer (after preliminary measurements and further coordination of the drawings)
Our company is certified according to the quality management system ISO 9001: 2008. For tracks, chains, rollers, wheels, we provide quality passports with an indication of the warranty period of work.
By concluding a contract with us (or a contract), you get: wholesale prices, convenient work schedule, personal manager, everything you need in one place, reporting documentation, quick deliveries so that the equipment does not stand idle.
We operate at a zero (VAT-0%) value-added tax rate, i.e. we have the opportunity to conclude contracts with non-residents of the Russian Federation and ship products for export.
Qoovee is a platform for B2B trade and business services. Here you can discover products in any industry, including the Vehicles & parts. There are wide range of wholesale products you need on Qoovee. You can find Vehicles & parts in bulk from China, UAE, Kyrgyzstan, Kazakhstan, Russia, Ukraine, Turkey, Europe, Africa, Latin America and other different countries. The up to date supplier directory is constantly being expanded: now on Qoovee there are more than 20 000 suppliers from 80 countries. All product suppliers, who represent more than 600 product categories, are waiting for you to cooperate with!