Construction Materials in bulk on Qoovee

Laminated chipboards (LDSP) of the Sheksna wood-based plant are intended for the production of furniture and other consumer goods. They are used in construction as structural and finishing materials. Advantages: - Large range of exclusive decors; - Raw material base from northern species of birch and spruce. Specification LDSP Type P2, SORT1, fine-grained, sanded, STO 00255094-068-2015 Format, mm 2750 x 1830 Thickness, mm 16 Formaldehyde emission class E1 Embossing Wood pores (PR), Soft wood (SW), Fine shagreen (P), Matte (M), Loft (LF), Country (C). Number of decors More than 100 Packing and loading rates Packing for vehicles: bottom - chipboard cover, top - corrugated cardboard, steel packing tape. Covered wagon packaging: double layer of polyethylene film, chipboard covers on all sides, steel strap. Format: Size 2750x1830 Thickness 16 mm Board area, m² 5.03 Boards per pallet 36 Average number of boards in a wagon/container 950/336 Number of boards in a euro truck 360

Chipboards are intended for the manufacture of furniture and other consumer goods. They are used in construction as structural and finishing materials. Advantages of chipboard ShKDP: - Raw material base from northern species of birch and spruce; - Plates of increased density; - Plates of increased moisture resistance; - Formaldehyde emission class E1; - Modern production lines. Chipboard specification Type P2 and P3, waterproof, fine-grained, sanded on both sides, GOST 10632-2014 Format, mm 2750x1830 mm Thickness, mm 16 Thickness tolerance, mm ± 0.3 Density (depending on the thickness of the board), kg /m³ 550-820 Humidity 5-7% Formaldehyde emission class E0.5 and E1 Packing and loading rates The boards are packed in 2 chipboard covers top and bottom, tied with steel packaging tape. In agreement with the customer, other types of packaging can be used.

Wall-mounted gas turbocharged single-circuit boiler with a capacity of 36 kW. Forced removal of combustion products. Ease of installation and ease of maintenance Gas; Remote control; Cascade Description. Gas wall-mounted heating boiler. The power of the device is regulated by a modulating burner. Forced removal of combustion products through a certified chimney / air duct system. Installation possibilities. Heating and water heating (in combination with a DHW cylinder). Possibility of installation in a residential area. Suitable for reconstructed and under construction residential buildings and apartments, where it is impossible to install a chimney of a conventional design. Minimum side clearance required is 10mm, all units are accessible from the front. Possibility of combination with different types of water heaters type VIH for domestic hot water preparation. Possibility of use in dusty rooms. Equipment: LCD display with backlight, push-button control. Internal software for status monitoring, parameter setting and troubleshooting. Built-in circulation pump with automatic stage switching, closed expansion tank, automatic air vent, automatic adjustable bypass valve, motorized safety valve "Intelligent" pressure control in the heating system. Copper primary heat exchanger with average efficiency >=91%. Chrome-nickel steel burner. Built-in DHW cylinder control. Permanent frost protection. Protection against jamming of the pump and three-way valve. Switch "WINTER / SUMMER" Possibility of setting to partial power in heating mode. Electronic ignition and control of all functions. Connecting kit included in delivery. Built-in switching module for eBus interface Turbocharged boiler. Depending on the design solution of the boiler room, it allows organizing an air supply and smoke exhaust system through the wall.

Imperial Red Granite

Chipboards are intended for the manufacture of furniture and other consumer goods. They are used in construction as structural and finishing materials. Advantages of chipboard ShKDP: - Raw material base from northern species of birch and spruce; - Plates of increased density; - Plates of increased water resistance; - Formaldehyde emission class E1; - Modern production lines.

The amount of material in slabs is constantly measured.

Toros Black Marble

ROSE PORRINO GRANITE

Royal Pink Marble

DESCRIPTION Industrial water spray cooling fans are designed for spraying of humidified and cooled air on workplaces in hot workshops of iron and steel, coke-chemical and machine-building plants and for other similar purposes (at the ambient temperatures of up to +40°C).    Industrial water spray cooling fans are installed near equipment generating maximum heat: dryers, rollers, calenders, vulcanizing and hydraulic presses, etc. The industrial fans are used at mining and processing plants, metallurgical plants and just for cooling hot workshops or production facilities in hot weather. It is often used as Man cooler in hot workshops if water feed is cut off or the model initially is without water feed.    Setup and Principles of Operation The industrial water spray cooling fan has a vertical design and consists of the following main units: axial fan, support, housing, compressed air supply cock, water supply cock, nozzle, and guard.   After turning on the industrial water spray cooling fan, the cocks regulate the compressed air supply, and the water is evenly supplied in the amount sufficient for humidification.   The industrial water spray cooling fan without the water supply is used as a blower fan at enterprises of other industries. Industrial Man cooler is used at workshops without conditioner.    Terms of Use ambient temperature from -40°C to +40°C, relative humidity up to 80% at 25°C in a temperate climate.

DESCRIPTION The heat exchanger can be of water or steam variety. The heat exchanger with bimetallic spiral-rolled aluminum fins of heat-transfer elements is designed for heating of the air in HVAC systems. The heat exchangers with finned tubes are designed for use in areas with the temperate climate.   The heating medium for water heat exchangers is water with the temperature of max. 150°C and the pressure generated by the pumps in the system is maximum 1.2 MPa.    The heating medium for steam heat exchangers is dry saturated or superheated steam with the temperature of max.150°C and the pressure generated by the pumps in the system is maximum 1.2 Mpa.   Installation and Principle of Operation of the Heat ExchangerThe heat exchanger consists of heat dissipating elements (finned tubes), tube sheets, covers and removable side shields.   For installation and fastening of heat exchangers during the mounting stage, 11x15 oval holes are provided on the sides of the tube sheets and removable shields.   The connecting dimensions of all heat exchangers with a single pitch of 125 mm make it possible to assemble heat exchangers by the height and length and to assemble the heat exchanger with the air capacity of up to 500,000 m3/h.   The heat-transfer element consist of finned tubes which are made of the 16x1.5 mm steel tube and aluminum rolling fins with the diameter of 39 mm. The step between the ribs is 3 mm.Side covers with partitions are welded onto the unit in accordance with the number of coolant strokes.In order to minimize rejects, before shipment, each heat exchanger made by the Metallist Plant passes the quality control.   In particular, the heat exchanger is subjected to hydraulic tests for strength and tightness, under pressure during 2 minutes, after which its outline dimensions, welding seams, appearance and completeness are checked.Heat Exchanging Element - Finned Tube Designed to dissipate heat from the coolant into the environment. The heat exchanging element is the bimetallic finned tube made of a steel tube with the diameter of 16 mm and aluminum rolling fins with the outer diameter of 39 mm, with the pitch between the ribs of 3.0 mm.

ESCRIPTION The air heating unit worms the air using the heat of hot or overheated water or steam coming from external sources of heat supply and is designed for air heating (including standby heating) of industrial premises, the technological process of which is not accompanied by any release of dust or explosive gases.  The unit should be operated in areas with a temperate climate. The heat transfer agent temperature should not be higher than 180°C and the pressure should be not higher than 1.2 MPa.  Principle of operation: When the fan is in operation, the air is taken from the room and heated up as it passes through the air heater. Air heater consists of finned tubes with working media hot water or steam. Then it is ducted through the fan working wheel blades into the heated area.   If heat transfer agent change on cool fluid then the unit works as cooling equipment.

We manufacture Explosion proof and Corrosion resistant radial Fans. Copper inserts at blades of working wheels, pulleys and other parts exclude spark appearance. Explosion-proof motor. The body of the fan is manufactured from AISI 304. According to the customer needs we make belt drive for easy maintenance. Rated diameter of working wheels is up to 2400 mm.

Explosion Proof Axial Mine fans (ATEX mine fans) for local-ventilation are used for safety work in coal and ore mines dangerous by gas or dust. Explosion-proof removable motor. Rated dimensions: 400 mm, 500 mm, 630 mm, 800 mm, 1200 mm.   Mine Fans work with air density up to 1.3 kg/m3, a temperature from -20 to +35C, dust content up to 50 mg/m3 and a relative humidity up to 95% (at a temperature of 25C).    Can be equipped by overheating shutdown device, with/without silencerCan be used for ventilation of small grooves. The design allows to connect two fans in one-by-one positioning in order to increase the pressure in the pipeline.The fan design uses an antistall device.    MMF-12 fans with rated diameter 1200 mm are manufactured with the blade angle 15, 25 or 35 degrees according the customer technical task.   Persian: اطلاعات تکنیکی کارخانه گلازوفسکی "متالیست" فن تهویه موضعی تک مرحله ای محوری با موتور قابل جابجایی ضد انفجار، طراحی شده برای تهویه عملیات معدن بن بست در معادن زغال سنگ و سنگ معدن، تونل ها، از جمله آنهایی که برای گاز و گرد و غبار خطرناک هستند، با چگالی هوا تا 1.3 کیلوگرم بر متر مکعب، درجه حرارت از -20 درجه تا +35 درجه سانتیگراد، میزان گرد و غبار تا 50 میلی گرم بر متر مکعب و رطوبت نسبی تا 95٪ (در +25 درجه سانتیگراد).

Mugla Black Marble

Thermal wood is one of the most durable solutions for exterior decoration of the facade and terrace of a wooden house, cottage, garden gazebo or flooring. This is a universal, universally demanded material. Thermal board on the facade - most often planken, lining, block house. Facing retains its appearance for years, you can forget about drying out, cracks and rot. Such a facade requires minimal maintenance during operation. Thermoboard on terraces, on verandas and in gazebos - open and unheated areas require the use of wear-resistant coatings, the thermoboard is not afraid of precipitation, temperature fluctuations. There will be no cracks on the floor, the elements will not dry out or warp, you will not have to cover up and repaint the floor every season. Thermal board in wet areas - saunas, baths, bathrooms and areas near pools are also demanding for finishing, but already because of constant high humidity or direct contact with water. In addition, TMD is a poor conductor of heat and does not heat up. Thermal board for paths - paths not only decorate the site and facilitate access in any weather, but are also subject to increased loads, exposure to precipitation and moisture. Paths made of TMD are natural and decorative, while being as reliable and durable as possible.

Mugla Gray Marble

Turkish Emperor Marble

BLANCO MARBLE

Burdur Beige Marble

Silver Onyx

Supren Salome Marble

Panda White Marble

Blanco Marble

Bilecik Beige Marble

Pajamas Marble

Dark Olive Marble

Mocca Limestone-aging

Turkey Afyon Violet Marble

Gray Pietra Marble

Blanco Marble

Black Marble

Vanilla Cream Beige Marble

Antalya Noche Travertine

Honey Onyx

BOSCH sets are available for sale. direct deliveries from the factory, original.

Pink Marble

Red Travertine

Sea Grass Limestone

Green Marble