Recycled Raw materials in bulk on Qoovee

The basic introduction of butadiene rubber BR9000   Compared with natural rubber and styrene butadiene rubber, butadiene rubber has the characteristics of high elasticity, good cold resistance, low heat generation, good flexure resistance and good dynamic performance. The main disadvantages are poor wet slip resistance, low tearing strength and tensile strength, large cold flow, slightly poor processing performance, and must be used with other types of rubber.   The main uses of butadiene rubber   China's butadiene rubber is mainly used in tires, shoes, high impact polystyrene and ABS resin modification, etc.

SBR1502 is a non-polluting styrene butadiene rubber used for light-colored products in the rubber industry, because it is widely used in the manufacture of white edges of tires and soles. Rubber protective cloth, medical equipment and other light-colored products

VAE emulsion is widely used as the base material of adhesives.VAE emulsions have good mechanical properties, the mean particle size of emulsions is small, there is a good balance between creep resistance and heat sealing, good wet viscosity and fast curing speed.VAE emulsion has a wide range of bonding properties, in addition to bonding wood, leather, fabric, paper, cement, concrete, aluminum foil, galvanized steel plate and other materials, can also be used as pressure sensitive adhesive and heat sealing adhesive, and for some difficult to bond materials such as polyethylene, polypropylene, polyvinyl chloride, polyester film is with unique bonding property.

PMMA SB180 Characteristics:Heat resistant injection stage, high temperature resistance, thermal deformation temperature up to 100°C, mechanical strengthUsage:Out plate, rod, tube; Injection heat resistance grade, especially suitable for motor vehicle indicator light housing/solar lens/electronic surface housing

[Product   Introduction] PF-PMC is thermosetting moulding material made of phenolic resin or modified phenolic resin as base material, wood flour, minerals, etc .as fillers and with other additives.  [Application   Areas]                          PF-PMCs products are widely used in instruments,meters, electrical appliances, electronics, lighting, home appliances, telecommunications, textiles, automobiles and other industries as insulating structural parts.  

Product Name  Black Masterbach Carrier Resin PP/PE (Can be customized) Color Black  Cabon Black Content 10%-50% Water Content <1.5% Size 2.5mm Density 1.54g/cm3 Add  1%-3% Appearance 3*3mm,Can be customized Compatibility PP/PE/LLDPE/HDPE/LDPE/ABS/PS/PA/PVC/EVA Resistance transference 8 grade Certificate ROHS (SGS) Dispersion Best Melt Temperature 130ºC

Product name:Carbon BlackAppearance:Pure black powderFeatures:High black degree , light weight , small proportion , small size, high iodine absorption value,  strong tinting strength, blackness strong hiding power, good liquidity, easy to disperse, resistance to ultraviolet ray, prevent aging, etc.Application: Widely used in sealant, leather, color paste, master, plastic, ink, paint, paint, cement, building materials, cosmetics, glass, ceramics and other fields. Packaging: 10kg/bag

HANDAN SHIBO NEW MATERIALS CO.,LTD Technical DATA SHEET OF PLA FY201/FY202/FY204/FY401/FY402/FY404  Applied to injection molding and fiber. FY601/FY602/FY604  Applied to Blister, film, sheet, staple fiber. FY801/FY802/FY804  Applied to sheet, film, staple fiber, filament. Properties Sheet Property FY201 FY202 FY204 FY401 FY402 FY404 FY601 FY602 FY604 FY801 FY802 FY804 Desnity 1.24 1.24 1.24 1.24 1.24 1.24 1.24 1.24 1.24 1.24 1.24 1.24 Yellow Index ≤ 10 ≤ 15 ≤ 15 ≤ 10 ≤ 15 ≤ 15 ≤ 10 ≤ 15 ≤ 15 ≤ 10 ≤ 15 ≤ 15 Water % ≤ 0.04 ≤ 0.04 ≤ 0.04 ≤ 0.04 ≤ 0.04 ≤ 0.04 ≤ 0.04 ≤ 0.04 ≤ 0.04 ≤ 0.04 ≤ 0.04 ≤ 0.04 Monomer content % ≤ 0.3 ≤ 0.3 ≤ 0.3 ≤ 0.3 ≤ 0.3 ≤ 0.3 ≤ 0.3 ≤ 0.3 ≤ 0.3 ≤ 0.3 ≤ 0.3 ≤ 0.3 Melt Index (190℃/2.16kg) 30 30 30 18 18 18 10 10 10 4 4 4 D-Content % ＜ 1 2 4 ＜ 1 2 4 ＜ 1 2 4 ＜ 1 2 4 Melt Point ℃ 175 165 155 175 165 155 175 165 155 175 166 155 Glass transition temperature ℃ 60 60 60 60 60 60 60 60 60 60 60 60

Product POM M90 Color White Shape Pellets Process Injection molding Polymer Copolymer Features High fluidity, fatigue resistance, high hardness, high rigidity, low wear, low warping, good electrical properties, acid resistance, alkali resistance, chemical resistance, solvent resistance, low mold sediment, antibacterial, food contact grade Application Automotive hood, automotive electronics, automotive external parts, wheels, accessories, gears, valves, valve parts, thin wall products Physical property Standard Value Unit Shrinkage Flow ASTM D995 1.8-2.2 % Water Absorption 23℃ 24hr ASTM D570 0.6 % Melt Index 190℃ 2.16kg ASTM D1238 9 g/10min Mechanical behavior Standard Value Unit Tensile Strength Yield ASTM D638 62 MPa Tensile Modulus ASTM D638 2600 MPa Elongation 23℃ ASTM D638 35 % Flexural Strength 23℃ ASTM D790 87 MPa Flexural Modulus 23℃ ASTM D790 2450 MPa Charpy Notch Impact ASTM D256 6.0 kJ/m2 Thermal performance Standard Value Unit Thermal deformation temperature 1.8MPa ASTM D648 95 ℃ Hardness Standard Value Unit Rockwell Hardness M(Scale) ASTM D785 80   Flame Rating Standard Value Unit UL UL94 HB  

TPU 1190 Color Natural Process Injection molding, Extrusion molding, Features Wear resistant grade,Polyester base, Good mechanical properties, Short cycle time Applilcation Pipe, Converyors,High pressure oil tubes, Seals,Screen packs, Wire &Cable, Footwear

HANDAN SHIBO  PA6 GF-30  Technical Date sheet Properties Test Method Units Value Physical property Density ISO1183 g/cm3 1.35 Water absorption(23ºC,24hr) ISO62 % 6.3 Moistrue absorption 1.9 Mechanical properties Tensile Modulus ISO527-1/-2 MPa 9500/6000 Tensile strength at break ISO527-1/-2 MPa 180/110 Elongation at break ISO527-1/-2 % 3.5/7 Flexural strength ISO178 MPa 235/ Flexural modulus ISO178 MPa 8600 Charpy impact strength(notched)+23ºC ISO179(1eA) KJ/M2 12/25 Thermal properties Deflection temperature at 1.8MPa ISO75-2 ºC 207 Deflection temperature at 0.45MPa ISO75-2 ºC 220 Melting temperature ISO11357-1/-3 ºC 220 Flammability Flammability UL94   HB

HANDAN SHIBO  PA6 GF-30  Technical Date sheet Properties Test Method Units Value Physical property Density ISO1183 g/cm3 1.35 Water absorption(23ºC,24hr) ISO62 % 6.3 Moistrue absorption 1.9 Mechanical properties Tensile Modulus ISO527-1/-2 MPa 9500/6000 Tensile strength at break ISO527-1/-2 MPa 180/110 Elongation at break ISO527-1/-2 % 3.5/7 Flexural strength ISO178 MPa 235/ Flexural modulus ISO178 MPa 8600 Charpy impact strength(notched)+23ºC ISO179(1eA) KJ/M2 12/25 Thermal properties Deflection temperature at 1.8MPa ISO75-2 ºC 207 Deflection temperature at 0.45MPa ISO75-2 ºC 220 Melting temperature ISO11357-1/-3 ºC 220 Flammability Flammability UL94   HB

Physical Properties Test Condition Test Method Unit CH65-3R-L CH100-3R-L CH100-0R-L CH210-0-L CH95-0-L Melt Index 300ºC,1.2kg GB/T3682.1-2018 cm3/10min 6.34 9.96 10.37 21.74 9.65 Optical Performance Test Condition Test Method Unit CH65-3R-L CH100-3R-L CH100-0R-L CH210-0-L CH95-0-L Transmittance 2.54mm ASTM D1003-2013 % 90 90.2 89.4 91 90.9 Haze 2.54mm ASTM D1003-2013 % 0.2 3 0.3 0.2 0.2 Impact Performance Test Condition Test Method Unit CH65-3R-L CH100-3R-L CH100-0R-L CH210-0-L CH95-0-L Izod Notched Impact Strength  3mm, 23ºC GB/T1843-2008 KJ/m2 75.4 70.6 69.7 60.1 71 Features Good demoulding performance, Weather resistance, Transparent pellets Good demoulding performance, Weather resistance, Transparent pellets Good demoulding performance, General purpose grade, Transparent pellets High Flow Good demoulding performance, General purpose grade, Transparent pellets Processing Extrusion molding Injection molding Injection molding Injection molding Injection molding Application Sheets Lighting Lamps and Lanterns, Electrical applications Lighting Lamps and Lanterns, Electrical applications Thin wall products Lighting Lamps and Lanterns, Electrical applications

ABS DG-417 Injection Molding High Gloss High Impact Usage: TV front case, copier case, telephone case, cosmetic case, tire cover. Price(EXW):1350$/MT Physical properties Test Condition Test Method Data Unit Shrinkage --- ASTM D955 0.5~0.8 % Density 23℃ ASTM D792 1.045 g/cm3 Melt Index  220℃ 10kg ASTM D1238 15.5 g/10min Mechanical properties Test Condition Test Method Data Unit Tensile strength 1/8", 50mm/min ASTM D638 51 MPa Elongation 1/8", 50mm/min ASTM D638 40 % Flexural strength 1/8", 3mm/min ASTM D790 77 MPa Flexural modulus 1/8", 3mm/min ASTM D790 2518 MPa Izod impact  1/8", 23℃ ASTM D256 25 KJ/m2 Hardness Test Condition Test Method Data Unit Rockwell Hardness R(Scale) 23℃ ASTM D785 112   Thermal Test Condition Test Method Data Unit HDT unannealed 1/8",1.8MPa ASTM D648 80 ℃ Vicat 1kg ASTM D1525 99 ℃ UL Test Condition Test Method Data Unit Flame rating 1/8" UL94 HB  

Water Bottle Grade PET YS-W01 Technical Data Sheet Physical Properties Unit Value Density g/cm³ 1.4 Ash % 0.02  Relative Viscosity dL/g 0.812  DEG Content % 1.3  Acetaldehyde ug/g 0.7 Moisture Content % 0.04  '-COOH Content mmol/kg 20  Powder Content mg/kg 17 Heterochromatic Particles particles/500g None Optical performance Unit Value  Color b*   -1.5  Color L*   83 Thermal Performance Unit Value  Melting Temperature ℃ 249  Crystallinity % 52.4  

BRAND APPLICATION S1003 Wire drawing S2040 Fiber K1008 Injcction T1701 Injcction B4808 Transparent K4912 Transparent K4818 Transparent K8303 Low MFI Copolymer K6606 Low MFI Copolymer F5606 Terpolymer F5006 Terpolymer C5608 Terpolymer C5908 Terpolymer T36F  Film grade PPR4220 Pipe grade PPR4400 Pipe grade B8101 Pipe grade B1101 Pipe grade T1001J Pipe grade K9026 High MFI Copolymer K6100 High MFI Copolymer K7100 High MFI Copolymer K7726H High MFI Copolymer K7760H High MFI Copolymer PPH-Y14 Fiber PPH-Y24 Fiber PPH-Y26 Fiber PPH-Y40 Fiber PPH-Y37 Fiber

PVC SG5 Technical Data Sheet PVC SG5 Material PVC Features Standard Resin Powder Physical Properties Test Method Unit Value Bulk Density INTERNAL METHOD g/ml 0.52 Relative Viscosity VN INTERNAL METHOD   113 Volatile Content INTERNAL METHOD % 0.08 Particle Size >250μm INTERNAL METHOD % 0.8 Particle Size <3μm INTERNAL METHOD % 98.8 Residual Monomer INTERNAL METHOD μg/g ≤1.0 Optical performance Test Method Unit Value Whiteness 160℃ After 10min INTERNAL METHOD % 81

Brand Melt Index(g/10min) Usage 3224 2 Films, Blowing molding, Antiblock, Food contact grade, Ethylene-butene copolymer 3470 23 Food contact grade 3840 5 Roll forming , Food contact grade 4105 4.5 Extrusion, Blowing molding, Films, Sheets, Pipe, Food contact grade 5815     7042 2 Blow molding, Cast molding, Compounding, Lamination film, Liners bags, Packaging film, Plastic wrap, Sanitary application, Agricultual film, Stretch wrap, 7047 1 Extrusion, Blowing molding, Films, Unantiblock, Food contact grade 7050 2 Lining film, Packaging film, Agricultural film 7144 20 Injection molding ,Food contact grade 7635 20 Injection molding, Stress crack resistance, Housewares application, Toys 8315 30 Metallocene, Cast molding, Cast film , Silage films, Stretch wrap 8320 20 Injection molding, Food contact grade 1018MF 1 Blow molding, High impact, Puncture resistant, Bag in box , Barrier food packaging, Bread bags, Compounding film, Food packaging application, Freeze film, Heavy-duty bags , Industrial packaging applciation, Liner bags, Overwrap film, Seal packaging, Stand up pouches, Trash bag, Agricultural film 1648BK     2018MB 2 Blow molding, High impact, High tensile strength, Puncture resistant, Bag in box , Barrier food packaging, Bread bags, Compounding film, Food packaging application, Freeze film, Heavy-duty bags , Liner bags, Overwrap film, Seal packaging, Stand up pouches, Trash bag, Agricultural film 2045G 1 Extrusion, Blow molding, Film grade , Unantiblock , Food contact grade 218W 2 Blowing film 218WJ 2 Blowing film 3518CB 3.5 Metallocene, Extrusion, Blow molding, Cast molding, Films, Wire and cable, Diaper backsheet 5100G 0.85 Metallocene, Blowing film, 5220G 3.5 Metallocene, Blowing film, Stretch wrap, Diaper bottom wrap 5400G 1 Metallocene, Blowing film, High toughness, heat sealing 6101XR 20 Injection molding, Stress crack resistance, High stiffness, High heat resistance, Pails , Lids, Closures, Containers, Composites 6101XR Wire & Cable 20 Compression molding, Compounding, Low voltage insulation, Masterbatch carrier, Wire&Cable 6201RQ 50 Powder, Coating Compounding, High gloss,  Stress crack resistance, High stiffness, Heat aging resistance, Pails , Lids, Closures, Containers, Composites, Thin wall products 6201RQ Wire & Cable 50 Compression molding, Compounding, Low voltage insulation, Masterbatch carrier, Wire&Cable 7151U 5.1 Roll forming , Rotational grade 7540 0.76 Extrusion, Low temperature resistance, wire and cable, insulation materials 8600L 2 Foaming.  wire and cable, insulation materials AT6101 1 Metallocene, Blowing film, High toughness, heat sealing DNDB7149U 4.2 Roll forming , Rotational grade E1018MA 1 Metallocene, Blowing film, High toughness, heat sealing FB2230 0.25 Blowing film, Unique matte surface, high yield, bubble stability, toughness and high melt strength, suitable for food packaging, express bag, Eisai film, FFS film, HDSS bag FB2310 0.2 Blowing film, Unique matte surface, high yield, bubble stability, toughness and high melt strength, suitable for food packaging, express bag, Eisai film, FFS film, HDSS bag FD21HS 2 Blowing film, Antiblocking , General purpose, Cast film Fu149M 1.2 Blowing film, Antiblocking , Food contact grade, LL0220KJ 2 Blowing film, Antiblocking , Food contact grade, LL1002KW 2 Blowing film, Antiblocking , Food contact grade, M200024 20 Injection molding, Houseware, bottle caps, large components and industrial containers, dustbins and auto parts, excellent low temperature toughness and environmental stress cracking resistance, high gloss. M2720 20 Injection molding, High toughness, high strength, high flow, used for the production of plastic barrels, plastic boxes and large injection molding and other daily necessities. M3804 4 Roll forming, High impact resistance, high rigidity, food contact grade, water tank, plastic cans, outdoor products, industrial containers, food containers, etc M500026 50 Injection molding, Container, bottle cap and deep cavity injection parts, excellent gloss, high fluidity, fast circulation injection performance. M735RU 6 Roll forming, Powder, Food contact grade,Anti-uv, High gloss, high melt strength, high toughness, high rigidity, oxidation resistance. Used for making auto parts, lampshades, industrial parts, decorative accessories, etc ML2202 0.25 Blowing molding ,   Shock absorbing gaskets, bags, film, agricultural application packaging, etc Q1018N 1 Extrusion, Blowing molding, Films, Unantiblock, Food contact grade SP0540 3.8 Metallocene, Blowing film, Low temperature heat sealing, high impact, low specific gravity, laminate film, flow film, stretch film SP1520 2 Metallocene, Blowing film, Low temperature heat sealing, high impact, low specific gravity, laminate film, flow film, stretch film SP4020 1.8 Metallocene, Blowing film, Low temperature heat sealing, high impact, low specific gravity, laminate film, flow film, stretch film TJZS-2650 50 Injection moldng, Thin wall products XP9000 0.55 Metallocene, Pipe grade, Drinking water contact grade, Good weather resistance, Cold/Hot water pipe XP9200 1.5 Metallocene, Blowing film, Low temperature heat sealing, high impact, low specific gravity, laminate film, flow film, stretch film YLF1801 0.96 Blowing film, high gloss, heavy-duty film YLF1802 1.5-2.5 Blowing film, Low temperature resistance, aging resistance, color printing film 222WT 1.9 Blow molding, Coating, Film grade , Food contact grade UR644 5 Roll forming, Wear resistant grade

GPPS 525 Technical Data Sheet Material Attribute Food Contact Grade Features  High light transmission, General purpose grade Application Appliances, Lampshade, Packaging, Housewares application, Disposable tableware  Physical Property  Standard Value Unit Melt Index  GB/T 3682 8.0 g/10min Monomer Content INTERNAL METHOD ≤800 % Mechanical Property  Standard Value Unit Tensile Stength Yield GB/T 1040 43 MPa Flexural Strength GB/T 9341 76 MPa Therml Property  Standard Value Unit Vicat Softening Temperature GB/T 1633 95 ℃ Optical Property  Standard Value Unit Transmittance GB/T 2410 90 %  

  LDPE 2426H Technical Parameters Process Blowing molding Foam molding Additives Antiblock Slip Agent Features . Greater resistance to blocking . Low specific gravity . Low friction index . Good processability . Good sealing  Application . Bags . Food packaging application . Freeze film . lamination film . Packaging film . Santiary application . Blown film . Film . Foamed parts . Food film . Sealing layer . Shrink wrap Physical Properties Test Conditions Value Unit Test Method Density 23℃ 0.924 g/cm³ ISO 1183 Melt Index  190℃ 2.16kg 2 g/10min ISO 1133 Mechanical Properties  Test Conditions Value Unit Test Method Tensile Modulus   270 MPa ISO 527 Tensile Strength Yield   10 MPa ISO 527 Tensile Strength Flow  50μm Blown Film 24 MPa ISO 527 Tensile Strength xFlow  50μm Blown Film 22 MPa ISO 527 Elongation Flow  50μm Blown Film 600 % ISO 527 Elongation xFlow  50μm Blown Film 800 % ISO 527 Falling Weight Impact Strength  50μm Blown Film 125 g ISO 7765 Fricition Coefficient  50μm Blown Film 0.12   ISO 8295 Thermal Performance Test Conditions Value Unit Test Method Vicat  50℃/hr 10N 94 ℃ ISO 306 Melting Temperature   112 ℃ ISO 11357 Optical performance Test Conditions Value Unit Test Method Gloss   60° 50μm Blown Film 120   ASTM D2457 Haze  40μm Blown Film 7.0  % ASTM D1003 Hardness Test Conditions Value Unit Test Method Shore Hardness D   48   ISO 868

EVA18J3   Part Marking Code EVA Material Shape Pellets Process Extrusion molding polymer copolymer Application Shoes material PROPERTIES TEST METHOD UNIT Data VA Content   % 18 Density ASTM D1505 g/cm3 0.939 Melt Index MI2.16 ASTM D1238 g/10min 2.56 Tensile Strength at break 50mm/min Compression Molded ASTM D638 MPa 16 Elongation at break 50mm/min Compression Molded ASTM D638 % >750 Melting point ASTM D-3418 ℃ 86 Hardness ASTM D2240 Shore D 33 Noted: The above values are measured by experiment and are for reference only.

High density polyethylene (hdpe) Grade PE100 pipe grade Color Black Process Extrusion molding Application area Construction  pipes Features It has high quality physical and mechanical strength, good dispersion of carbon black, excellent weather resistance, long-term stability and excellent resistance to fast cracking propagation and slow cracking    growth Description PE100 grade, black mix, used to produce tubing in a variety of fields: water pipe, gas pipe, sewage pipe, replacement liner, sea water drain pipe and industrial pipe..   Properties Value Test Method Unit Melt flow rate 0.28 ISO 1133 g/10min ,190°C,5kg Density(mix) 0.959 ISO 1183/ISO 1872-2B 23°C, g/cm3 Density(basic resin) 0.949 ISO 1183/ISO 1872-2B 23°C, g/cm3 Carbon black content 2.3 ASTM D-603 % Tensile strength yield 23 ISO/DIS6259 MPa Elongation break 600 ISO/DIS6259 23°C, 50mm/min

SLES 70% Sodium Laureth SulfateTEXAPON N70 or SLES 70% is a highly concentrated sodium lauryl ether sulfate derived from natural fatty alcohols Chemical Formula:CH3(CH2)10CH2(OCH2CH2)nOSO3NaPhysical Characteristic:White or Light Yellow JellyChemical Characteristic:Neutral Salt,Hazardous,Organic Substance: Applications: • Shampoo • Detergents • Soaps • Toothpaste • Liquid soap • Dishwashing liquid • Foaming agent for textilesContact us with any questions

Sodium Sulfide: In the mining industry (flotation), sodium sulfide is used as an activator to sulfide and hydrophobize the surface of desired minerals. For the flotation of oxidized minerals, the surface of the oxidized mineral is first sulfided with sodium sulfide and then a collector is used. This action improves the efficiency of the collector and hence the efficiency of the flotation. In the leather industry, sodium sulfide is used to sulphitize tanning, and also as an itch agent in the leather laiming process. In the textile industry, sodium sulfide is used as a bleach, sulphur- and chlorine remover. In pulp and paper industry, sodium sulfide is used in the crafting process. Also, sodium sulfide is used in paint, detergent and oil industry.

Masterbatch, translated from English, means super concentrate. This is a generally accepted designation of coloring concentrates, polymer additives, pigments, which are widely used in the manufacture of plastic products, giving them the desired color. The masterbatch for polymers has a wide range of colors, both primary colors of the rainbow and intermediate shades, allowing you to play with color at your discretion.

Product Description: HYDROGEN PEROXIDE CAS Number: 7722-84-1. Molecular formula: H2O2. Hydrogen peroxide 50%. WC code: 08-007-01. Specifications. Appearance Clear, colorless liquid, concentration ± 0.5, density 1.1925, acidity max. 0.06, stability max. 0.3. Iron content max. 0.03, pH 1.01. Packaging: 551.15 lb drum, 4 drums per pallet. Shipping UN/NA: 2014. Proper shipping name: Hydrogen peroxide, aqueous solution. Grade: 5.1 (8). Packing group: II.

Product Description CAS Number: 67-63-0 Sales Specification Sp. Gr. 20oC: 0.784 – 0.786 Purity, wt%: 99.8 min Water Content, ppm: 500max Acidity, as acetic acid, ppm: 5 max Color, Platinum-Cobalt Scale: 5max Non-volatile Matter, ppm: 5max Water Miscibility: Clear Distillation Range, oC: IBP: N/A, DP: N/A Meets USP standards Packing In 353 lb drum, 4 drums per pallet Transportation Proper Shipping Name: Isopropyl alcohol UN No: 1219 Hazardous Class: 3 Packing Group: II

  Quick Response....   Buy/purchase caluanie muelear oxidize pasteurize chemical crushing metals for sale from manufacturer in USA, Canada, Europe, Aus, UAE, Asia. We produce and supply in wholesale caluanie muelear oxidize and other research chemical products to any interested person / company in need at very affordable prices with international shipping available. We guarantee our product quality. Whatever your requirements, we will utilize our extensive industry Knowledge and experience to deliver a customized and cost effective solution. Contact us for price and more information

We are ready to supply petroleum products at a discount from the market price. Available: SPO, diesel fuel EN 590, liquefied natural gas (LNG), light cycle oil (LCO), UREA 46, saltpeter, PETROLEUM COKE and others. Quantity: from 25,000 tons per month. Contract with the manufacturer. Payment terms: SBLC / DLC mt700 / BG. Shipping terms: FOB or CIF to the safest port in the world. Price: The final price of the goods depends on the country of delivery and will be indicated after receiving official notification from the buyer. Previous order: EN590 CIF Qatar - $565, Urea 46 CIF Turkey $365Turkey $365. Please contact me on messenger.

Putanka - cotton. We are looking for long-term partnerships for the sale of goods.

Polyamide 6 (PA 6) (nylon-6, polycaproamide, capron, caprolon) is a non-toxic structural high-molecular polymer material. The polymer has the following physical characteristics: high hardness and mechanical strength, wear resistance, low coefficient of friction, low density, good anti-friction and dielectric properties. Polyamide 6 dyes well and has good bonding properties. The surface of polyamide materials is smooth, resistant to fading and changing shape. The polymer does not release toxins upon contact with food. Polyamide is one of the cheapest and most widely used polymers.

Isobutyl alcohol or isobutanol is used as a solvent in the paint and varnish industry, for the production of esters, paints and all kinds of organic compounds. It is obtained, as well as butyl alcohol chemically close to it, by oxosynthesis from propylene.

Gasoline produced in the Russian Federation. Taif with octane 102 and Orsk with octane 92. Pickup, payment by bank transfer in local currency. The goods are cleared by customs, payment of consumption tax is required.

Microsphere: Gray, 0-500 microns, dry 1%, price from 1 to 5 tons, 75,000 rubles Gray, 0-500 microns, dry 1%, price from 5 to 10 tons, 74,000 rubles Gray, 0-500 microns , dry 1%, price from 10 to 20 tons, from 73,000 rubles Gray, 0-500 microns, dry 1%, price from 20 tons, from 70,000 rubles Microsphere Gray, 0-200 microns, dry 1%, price from 1 to 20 tons, 120,000 rubles Products are packed in BIG BAG (MKR) of 500 kg. TU 5712-089-15005227-2020

Structure: solution of alkyl methacrylic polymers in a mixture of organic solvents (aromatic hydrocarbons). Purpose: lowering the pour point of oils due to the destruction of crystallizing paraffins. Packing: steel drums with a capacity of 170 kg net (according to GOST 6247 or GOST 13950). The product is stable under normal conditions under proper storage and transportation conditions. Guaranteed shelf life: 36 months from the date of manufacture. From the moment of opening the container of the manufacturer - 12 months from the date of opening. Minimum delivery 1 barrel.

Sale at a discount from the market value. ESPO Diesel EN 590 Liquefied natural gas (LNG) Light Cycle Oil (LCO) UREA 46 PETROLEUM COKE Quantity: from 10,000 tons per month Terms of payment: SBLC Terms of delivery: CIF safe world port Price: The final price depends on the country of delivery and will be provided to FCO after receiving the official LOI and the reference from the Buyer.

Carbamide UREA - 46 Quantity: from 10,000 tons per month. Payment terms: SBLC. Delivery terms: CIF safe world port. Approximate price: CIF Poland $540 a ton. The final price of urea depends on the country of delivery and will be provided to the FCO after receiving the official LOI and the reference from the Buyer. Packing: Big Bag. Inspection: SGS RW: 2%.

Aluminum sulfate is used as a coagulant for water purification for domestic and industrial purposes and is used in paper, textile, leather and other industries. Used as food additive E520. In the photograph it is included in the composition of stabilizing solutions and tanning fixers.

It is made from oxides of aluminum and silicon, with the use of special additives to eliminate defects in the surface of the stone. It is necessary for giving a mirror shine to the surface at the stage of finishing polishing of granite, marble and other types of natural stone, as well as for artificial stones. Due to the shape and hardness of the aluminum oxide monograin, as well as the high dispersion of the powder, the polishing effect is achieved much faster compared to other types of similar products. Average powder consumption: 10-50g/m2 depending on the hardness of the polished material and its pre-treatment. To use, mix the required amount of powder with water to a paste-like mass and apply to the surface to be treated. Buff the paste with a felt nozzle to a final shine. The remains of the polishing material are washed off the treated surface.

Fine-dispersed aluminum hydroxide of various modifications, intended for wide use as a filler in the production of dry building mixtures, artificial stone, as well as a flame retardant filler in thermoplastics, thermoplastics and elastomers.