Plotters, digitizers and printing machines in bulk on Qoovee

Printing Method Print Technology FINE (Full-Photolithography Inkjet Nozzle Engineering) Print Resolution 2400 x 1200 dpi Print Speed Arch D 24 x 36″ (61.0 x 91.4 cm): 21 seconds in Economy ModeArch E 33.1 x 46.8″ (84.1 x 118.9 cm): 41 seconds in Economy Mode Print Head PF-04 Ink Droplet Size 4 pl Line Accuracy ±0.1% or less Minimum Line Weight 0.79 mil (0.02 mm) Number of Nozzles Matte Black: 5,120 nozzlesOther Colors: 2,560 nozzles per color Nozzle Pitch 1200 dpi x two rows Printhead Swath 1.07″ (27.2 mm) Ink Types Dye: Cyan (C), Magenta (M), Yellow (Y), Black (K)Pigment: Matte Black (MBK) Compatible Ink Tanks PFI-107 (130 ml): C, M, Y, BK, MBKPFI-207 (300 ml): C, M, Y, BK, MBK Ink Tank Capacity Starter: 130 ml (MBK), 90 ml (C, M, Y, BK)Replacement: 130 ml (PFI-107) or 300 ml (PFI-207) Ink Supply Method Tubing system with sub-ink-tanks for continuous ink supply Nozzle Recovery System Non-firing nozzle detection and compensation Media Handling Paper Handling Roll Feed: One roll, top-loading, front outputCut Sheet: One sheet, top-loading front output Media Width Roll Feed: 10-36″ (254-914 mm)Cut Sheet: 8-36″ (203-914 mm) Maximum Print Length Roll Feed: 59′ (18 m)Cut Sheet: 63″ (1.6 m) Margins Roll Feed, All Sides: 0.12″ (3 mm) or 0″ (0 mm) for borderlessCut Sheet, Leading, Sides (Left and Right): 0.12″ (3 mm)Cut Sheet, Trailing: 0.91″ (23 mm) Borderless Printing Width Roll Media: 10″ (25.4 cm), B4, A3, 14″ (35.6 cm), A2, 17″ (43.2 cm), B2, A1, 24″ (61.0 cm), B1, A0, 36″ (91.4 cm) Media Cutter Durable dual-blade rotary cutter Media Thickness 2.8-31.4 mil (0.07-0.80 mm) Core Sizes 2″ (5.1 cm) and 3″ (7.6 cm) Maximum Media Roll Diameter 5.9″ (150 mm) Output Flat stacker, basket Output Capacity 20 sheets with stackable configuration Connectivity Interfaces USB 2.010/100/1000Base-T/TX Controller L-COA Processor Memory 256 MB Internal Hard Drive None Mail Server None Compatible Operating Systems Windows XP (32-bit), Server 2003 (32/64-bit), Server 2008 (32/64-bit), Server 2012 (64-bit), Vista (32/64-bit), 7 (32/64-bit), 8 (32/64-bit)Macintosh OS X 10.6.8-10.9.x Print Languages GARO (Canon proprietary), HP-GL/2, HP RTL Protocols TCP/IP (IPv4/IPv6), IPX/SPX, AppleTalk, SNMP (Canon MIB supported), HTTP Physical Acoustic Noise Operation: 48 dBStandby: 35 dB or lessAcoustic Power: 65 dB Power Requirements 100-240 VAC, 50-60 Hz Power Consumption Maximum: 140 W or lessStandby: 5 W or lessPower Off: 1 W or less (Executive Order Compliant) Certifications Electrical Safety Regulations: TUV (USA), cTUV (USA), TUV.S mark, CB certification (others)Electromagnetic Interface Regulations: FCC Class B (USA), IC Class B

BASIC INFORMATION Build volume: 25×21×21 cm (9.84"×8.3"×8.3") Layer height: 0.05 - 0.35 mm Nozzle: 0.4mm default, wide range of other diameters/nozzles supported Filament diameter: 1.75 mm Supported materials: Wide range of thermoplastics, including PLA, PETG, ASA, ABS, PC (Polycarbonate), CPE, PVA/BVOH, PVB, HIPS, PP (Polypropylene), Flex, nGen, Nylon, Carbon filled, Woodfill and other filled materials. Max travel speed: 200+ mm/s Max nozzle temperature: 300 °C / 572 °F Max heatbed temperature: 120 °C / 248 °F Extruder: Direct Drive, Bondtech gears, E3D V6 hotend Print surface: Removable magnetic steel sheets with different surface finishes, heatbed with cold corners compensation Safety features: IR filament sensor, high-quality Delta PSU with Power Panic, 3 thermistors, RPM monitoring LCD Screen: Monochromatic LCD Kit box dimensions: 11 kg, 24×42×43 cm; 9.5×16.5×16.9 in (X×Y×Z) Assembled printer box dimensions: 11 kg, 54×52×48 cm; 21×20.5×18.9 in (X×Y×Z) Printer dimensions (without spool): 7 kg, 50×55×40 cm; 19.6×21.6×15.7 in (X×Y×Z) Power consumption: PLA settings: 80W / ABS settings: 120W Condition of the goods: You will receive full transparency on the individual products, their condition, product prices and informative photos. The goods are in good condition and are visually inspected and classified in category A, B and C.   Minimum purchase: Individual trucks will be made up for you. The price quoted is a truck average price, therefore the price will vary depending on your selection.   Household goods: Consumer Electronics: Computer Appliances: Electric Electrical Cameras, Laptops, Mobile Phones, Drones, Graphics Cards, Motherboards, Video Games, Antminers, Dishwasher, freezer, cookers, fridge/freezer, oven, dryer, washing machine.   Top Brands: Apple,Sony,Panasonic,Heir Thermocool,MSI,Gigabyte,AMD,AEG, Bosch, Bauknecht, LG, Neff, Samsung, Siemens.   Appointment: After making an appointment, you are welcome to visit our warehouse in Nuremberg at any time and convince yourself of our high quality.   Contact: For further details, please send us your contact details as a message, or contact us by phone. We look forward to a successful cooperation.

Technical Specs Hardware ExtruderAll Metal-Hot End Direct Drive Build PlateHeated Glass Build Volume255x155x170mm (10x6x6.7in) Range Microns50-300 Touchscreen Size4.5 in (diagonal) Full Color IPS Printer Size645x406x404mm (20.3x16x15.9in) LevelingSemi-Auto Leveling Extruder Max Temp C280 Degrees Celsius Print Bed Max Temp C100 Degrees Celsius Weight47.5 lb / 21.5 kg ConnectivityUSB, WIFI, Ethernet Material TypesPLA, PETG, Nylon, Eco-ABS Internal Storage8GB Electrical Input Rating100-240 V, 47-60 Hz, .85-2.3 amp Software Software OptionsDremel Digilab 3D Slicer, Dremel Print Cloud, Simplify 3D, Polar3D File Type Accepted By SlicerSTL, OBJ, 3mf, BMP, .g, .gcode, GIF, JPG, JPEG, PNG, x3d File Type Accepted by PrinterGCODE, G3DREM, .g Mac RequirementsMac OS X Version 10.9+ Windows Requirements Windows 7, 8, 8.1, 10   Condition of the goods: You will receive full transparency on the individual products, their condition, product prices and informative photos. The goods are in good condition and are visually inspected and classified in category A, B and C.   Minimum purchase: Individual trucks will be made up for you. The price quoted is a truck average price, therefore the price will vary depending on your selection.   Household goods: Consumer Electronics: Computer Appliances: Electric Electrical Cameras, Laptops, Mobile Phones, Drones, Graphics Cards, Motherboards, Video Games, Antminers, Dishwasher, freezer, cookers, fridge/freezer, oven, dryer, washing machine.   Top Brands: Apple,Sony,Panasonic,Heir Thermocool,MSI,Gigabyte,AMD,AEG, Bosch, Bauknecht, LG, Neff, Samsung, Siemens.   Appointment: After making an appointment, you are welcome to visit our warehouse in Nuremberg at any time and convince yourself of our high quality.   Contact: For further details, please send us your contact details as a message, or contact us by phone. We look forward to a successful cooperation.

Product Description Product Name Rotary Heat Press Printing Area 23 cm x 30 cm (9 ″ x 12 ″) Power 600 W Max Temperature 250 ° C Package Size 43 * 39 * 34.7 cm Weight 15 kg Voltage 110 V / 220 V Model HP230B Packing and delivery Sales unit: single piece. Size of one package: 43X39X35 cm.Gross weight of one package: 15000 kg.

Mutoh ValueJet VJ-1638 / VJ-1638W / VJ-2638 Printhead-DG-43345To be used with: Mutoh Valuejet 1638 / Valuejet 1638W / Valuejet 2638Remarks: Original

Mutoh ValueJet 1628TD/2628TD Printhead-DG-42771 To be used with: Mutoh Valuejet 1628TD / Valuejet 2628TD Remarks: Original

Zulfahmi Lubis Electronic is one of the leading developers, distributors, manufacturers of scanners, printing machine, inkjet printer and laser printer technology for photo printers. The consistent quality of our products is based on advanced American technology and excellent Asian R & D teams. We currently offer the best products and brands from: MUTOH PRINTER, MIMAKI, ROLAND PRINTER, EPSON, HP PRINTER, DTG and FAST T JET, and many other customs!

Zulfahmi Lubis Electronic is one of the leading developers, distributors, manufacturers of scanners, printing machine, inkjet printer and laser printer technology for photo printers. The consistent quality of our products is based on advanced American technology and excellent Asian R & D teams. We currently offer the best products and brands from: MUTOH PRINTER, MIMAKI, ROLAND PRINTER, EPSON, HP PRINTER, DTG and FAST T JET, and many other customs!

FormLabs Form 3l 3D Printers Condition of the goods: You will receive full transparency on the individual products, their condition, product prices and informative photos. The goods are in good condition and are visually inspected and classified in category A, B and C.   Minimum purchase: Individual trucks will be made up for you. The price quoted is a truck average price, therefore the price will vary depending on your selection.   Household goods: Consumer Electronics: Computer Appliances: Electric Electrical Cameras, Laptops, Mobile Phones, Drones, Graphics Cards, Motherboards, Video Games, Antminers, Dishwasher, freezer, cookers, fridge/freezer, oven, dryer, washing machine.   Top Brands: Apple,Sony,Panasonic,Heir Thermocool,MSI,Gigabyte,AMD,AEG, Bosch, Bauknecht, LG, Neff, Samsung, Siemens.   Appointment: After making an appointment, you are welcome to visit our warehouse in Nuremberg at any time and convince yourself of our high quality.   Contact: For further details, please send us your contact details as a message, or contact us by phone. We look forward to a successful cooperation.   MACHINERY CONNECTIONS, CMT - CORPS OHIO, USA

SPECIFICATIONS Print technology: Fused Deposition Modeling Filament Diameter: 2.85mm Build area: 230 x 190 x 200mm Minimum layer resolution: 20 microns Maximum layer resolution: 600 microns Dimensions: 394 x 489 x 637mm Weight: 14.4kg                     Condition of the goods: You will receive full transparency on the individual products, their condition, product prices and informative photos. The goods are in good condition and are visually inspected and classified in category A, B and C.   Minimum purchase: Individual trucks will be made up for you. The price quoted is a truck average price, therefore the price will vary depending on your selection.   Household goods: Consumer Electronics: Computer Appliances: Electric Electrical Cameras, Laptops, Mobile Phones, Drones, Graphics Cards, Motherboards, Video Games, Antminers, Dishwasher, freezer, cookers, fridge/freezer, oven, dryer, washing machine.   Top Brands: Apple,Sony,Panasonic,Heir Thermocool,MSI,Gigabyte,AMD,AEG, Bosch, Bauknecht, LG, Neff, Samsung, Siemens.   Appointment: After making an appointment, you are welcome to visit our warehouse in Nuremberg at any time and convince yourself of our high quality.   Contact: For further details, please send us your contact details as a message, or contact us by phone. We look forward to a successful cooperation.   MACHINERY CONNECTIONS, CMT - CORPS OHIO, USA  

It is an economical promotional product that you can make the most effective presentation, as logo printing can be made on cardboard cups. The promotional product, another name of which is called paper cup, is also used as a necessity material in offices and fairs. Information such as price information, technical information, production time about cardboard cups

ХарактеристикиКод00000095267Напряжение, V220Объем0.616Вес брутто:99Вес нетто73ОписаниеМашина для нанесения грунтовки на текстильные изделияSCHULZE PRETREATmaker III. Уникальное решение для нанесения грунтовки на изделие перед прямой печатью по текстилю.Основные особенности: Сенсорный дисплей 5 настраиваемых программ по грунтовке Дюзы выпрыскивают грунтовку с давлением в 10,5 бар Графическая презентация процесса самостоятельной автоматической чистки Самостоятельная очистка происходит автоматически в определенные интервалы времени Если машину долго не использовали, то будет запущен автоматический процесс самостоятельной очистки В два раза по сравнению с предыдущими моделями была увеличена производительность электрических форсунок Прозрачная грунтовка и трубки для воды В случае неправильной работы на экране отображается информация об ошибкеОписание:SCHULZE PRETREATmaker III – позволяет грунтовать отдельные готовые изделия без потери качества. За счет обновления электроники была достигнута повышенная производительность машины. На инновационном увеличенном сенсорном дисплее можно легко установить длину, ширину и интенсивность грунтования. В машине установлены 4 форсунки. Можно выбирать, какие форсунки будут использоваться. Это позволяет не только регулировать область нанесения грунтовки, но и экономит саму грунтовку.Длина области распыления может быть отрегулирована с интервалами в 2см с помощью сенсорного дисплея. Интенсивность распыления грунтовки регулируется по 10-ти балльной шкале. Отличительной особенностью данной модели является автоматический процесс самостоятельной чистки всех 4х форсунок (потребляет 12мл/час очистительной жидкости). Это предотвращает засыхание и закупоривание дюз у распылительных голов во время работы машины. Все эти настройки можно установить и сохранить в каждую из 5 предустановленных программ для грунтования, которые вы можете создать сами.Ваши преимущества при использовании SCHULZE PRETREATmaker III Равномерное нанесение грунтовки для качественной печати по темным материалам (высококачественные распылительные форсунки). Стабильные результат печати (все текстильные изделия будут перегрунтованы одинаково, что позволит поддерживать стабильное качество печати) Чистота в производственном помещении (закрытые камеры для грунтовочной жидкости) Экономия грунтовочной жидкости (интенсивность распыления контролируется автоматически, что позволяет снизить расход грунтовки) Машина проста в использовании. Простой процесс очистки (Процесс очистки может быть запущен нажатием одной кнопки, т.к. в машине есть желоб для слива очистительной жидкости. Распылительные головки снимаются для тщательной ультразвуковой прочистки без использования специальных инструментов.).Технические характеристики: Размеры области для распыления: 40х60см Метод распыления: распылительные головки двигаются над столом внутри машины Длина столика для изделия: 80см Количество распылительных голов: 4 шт. Размеры машины: длина 90см х ширина 72 см х высота 50 см Размеры в упаковке: длина 90 см х ширина 72см х высота 64 см Вес нетто: 70 кг Вес брутто: 90 кг Напряжение: 230 Вольт Мощность: 125 Ватт Сила тока: 2А Главный предохранитель: 12А Рабочее давление в распылительных головах (при распылении грунтовки): 5,5 бар Рабочее давление в распылительных головах (при распылении воды): 10,5 бар В комплект поставки также входят: запасная распылительная голова, сменный фильтр и ультразвуковой очиститель Дополнительные возможности: цинковое и порошковое покрытие корпуса, три встроенных контейнера для грунтовки, воды и слива

ХарактеристикиКод00000095262Объем0.0001Вес брутто:0.5Вес нетто0.45

ХарактеристикиКод00000096769ОписаниеСетевой лазерный А3+ принтер с возможностью печати белым тонером OKI Pro9420wt своими функциональными возможностями полностью способен удовлетворить разнообразные нужды дизайнеров, графических студий, офисов оперативной полиграфии.Принтер OKI Pro9420wt обеспечивает печать на широком спектре носителей плотностью до 300 г/м2, в том числе на цветной бумаге, бумаге для термопереноса, прозрачной пленке.При этом устройство показывает высокую скорость печати: для формата A4 — 31 стр/мин; A3 — 16 стр/мин.Производительность и компактная конструкция настольного типа обеспечивают великолепный чистый белый цвет и яркость других цветов и оттенков, обычно достижимые только при использовании дорогостоящего промышленного оборудования.Объединяя светодиодную полноцветную печать высокого разрешения с технологией печати белым тонером (WT), принтеры Pro серии WT обеспечивают гибкость использования различных носителей формата A4, с разной плотностью и длиной.Обновленные принтеры Pro серии с технологией печати белым тонером (WT) способны закрашивать участки белым цветом на множестве различных цветных поверхностей, а также могут печатать с использованием тонеров других цветов, создавая яркие рисунки на темном фоне.За счет преодоления всех традиционных ограничений CMYK результаты печати соответствуют возможностям дизайна, так как теперь возможно создание футболок и рекламных товаров, малотиражного производства и разработки концепций дизайна упаковки, оформления витрин и печати на прозрачной пленке.Печать белым тонером позволяет дизайнерам, графическим студиям, оформителям магазинов и другим структурам, работающим с графикой, широкие возможности печати. Тип принтера светодиодный Цветность печати цветная Максимальный формат А3+ Плотность бумаги (макс) 300 г/м2 Скорость печати (А4, ч/б) 31 стр/мин Технология печати Светодиодная Скорость печати (А4, цвет) 31 стр/мин Скорость печати (А3, ч/б) 16 стр/мин Интерфейс подключения USB 2.0 / Ethernet /LPT Емкость лотка подачи бумаги 760 (530+230) листов Количество страниц в месяц 50000 / 8000 Размещение Настольный Область применения Малый офис Количество цветов 4 Разрешение для ч/б печати (макс) 600 x 600 dpi Разрешение для цветной печати (макс) 1200 x 600, ProQ2400 Multi-level technology dpi Скорость печати (А3, цвет) 16 стр/мин Время разогрева до 85 с Время выхода первого отпечатка (ч/б) 10.5 с Время выхода первого отпечатка (цвет) 10.5 с Плотность бумаги (мин) 64 г/м2 Ресурс цветного картриджа/тонера 15000 страниц Ресурс ч/б картриджа/тонера 8000 (белый) страниц Количество картриджей 4 Поддержка PostScript Есть Поддержка Эмуляция PostScript 3 Количество установленных шрифтов PostScript 136 Емкость лотка подачи бумаги (опционально) 2880 листов Вывод бумаги (стандарт) 700 (500 лицевой стороной вниз и 200 лицевой стороной вверх) листов Емкость обходного лотка подачи бумаги 230 лист. Степлер Нет Память (стандарт) 512 Мб Память (макс) 1024 Мб Процессор PowerPC 750 Частота процессора 800 МГц Поддержка ОС Windows Vista (32-бит и 64-бит) / 2000 Workstation (SP3 или более ранние) / 2000 Professional (SP3 или более ранние) / Server 2000 (SP3 или более ранние) / Advanced Server 2000 (SP3 или более ранние) / XP Professional (32-бит и 64-бит) / XP Home / Server 2003 (32-бит и 64-бит) / Server 2008 (32-бит и 64-бит) / Server 2000 (SP4) + Citrix MetaFrame XP Presentation Server Feature Release 4 / Server 2003 Standard Edition + Citrix MetaFrame XP Presentation Server Feature версии 4 / 7 (32-бит и 64-бит); Mac OS X 10.3.9 - 10.6.7 / 10.7.x Потребляемая мощность (при работе) 780 Вт Потребляемая мощность (в режиме ожидания) 200 Вт Уровень шума при работе 54 дБ Уровень шума в режиме ожидания 42 дБ Габариты (Ш) 654.5 мм Габариты (В) 471 мм Габариты (Г) 623 мм Вес 76 кг УНИКАЛЬНАЯ АКЦИЯ - РАСШИРЕННАЯ СПЕЦИАЛЬНАЯ ГАРАНТИЯ ОТ ОКИ НА 3 ГОДА!

ХарактеристикиКод00000094264Мощность, W550Напряжение, V220Длина без упаковки, м0.105Ширина без упаковки, м0.138Высота без упаковки, м0.066Объем1Вес брутто:225Вес нетто195ОписаниеПринтеры BROTHER серии GT-3 предназначены для прямой печати по текстилю. Основными покупателями данной техники являются рекламные агентства, компании предлагающие печать на футболках по индивидуальным дизайнам, а также небольшие производства. Серия представлена тремя моделями Brother GT-341, Brother GT-361, Brother GT-381. Данные модели заменили принтеры GT-541, GT-782, которые хорошо зарекомендовали себя на рынке.Стартовая модель Brother GT-341 позволяет печатать на белом цветами CMYK, посредством четырех фирменных печатающих головок Brother. Принтеры GT-361 и GT-381 позволяют печатать на темном, нанося белую краску в основание рисунка двумя или четырьмя печатающими головками соответственно. GT-341 и GT-361 могут быть модернизированы до следующих в серии моделей с помощью перестроечного комплекта, который приобретается отдельно. Уникальная японская технология позволяет повысить скорость печати за счет последовательного распыления сначала белой краски, а затем цветной, и все это за 1 проход печатающей головки над изделием.Отличительной особенностью серии является возможность печати в высоком разрешении до 1200 на 1200 точек на дюйм. Для простых рисунков можно выбрать меньшее разрешение в целях экономии краски.В соответствии с философией программы BrotherEarth чернила на водной основе для принтера являются безвредными даже для маленьких детей от 3-х месяцев и не содержат опасных компонентов (японский стандарт OEKO-TEXStandard 100). Изделия, напечатанные на принтере, имеют класс устойчивости к стирке 4 из 5 по европейской классификации. Загрузка изображений на печать происходит по сетевому кабелю или через USB. Изображение может быть создано в любом известном графическом редакторе и далее отправлено на печать одной кнопкой с помощью специального драйвера принтера GT-3.Принтер Brother GT-3 - это выбор тех компаний, которые ценят качество печати, простоту эксплуатации, производительность и надежность техники, которая гарантируется компанией Brother, всемирно известными специалистами по прямой печати.

The digitizer allows you to digitize paper patterns with minimal errors, has high expansion and accuracy. The workstation consists of: a table with a menu, a 16-button cursor and a stand. The stand is adjustable in height and angle. There is a possibility of using various technologies for entering patterns: rotation, copying, obtaining a mirror image. All information entered from the digitizer is saved in CAD. Advantages: ease of use high accuracy the ability to enter gradation Application : To digitize paper patterns Size A0 (36 "* 48") Accuracy 0.200 mm Resolution 2540 LPI Manufacturer China < tr> Input voltage 220V / 50Hz Power 11 W Resolution 2540 LPI Package dimensions 127x16x160 cm < tr> 73x24x87 cm

Magic Ink Jet is a large format printer designed for drawing full-size layouts (pattern printing) and designed specifically for the garment industry. The plotter combines high resolution, width and print speed with ease of use and maintenance. Unlike other inkjet plotters, the Magic Ink Jet textile plotter is compatible with all CAD systems. The paper roll in the Magic Ink Jet plotters is installed from the front, which increases the Convenient paper loading and saves the working area of ​​the room, allows you to work in continuous printing mode. The low-cost and widely available supplies used in this series of printers avoid the hassle of purchasing and replacing them. Benefits: HP 45 ink cartridges high print speed < li> low noise level compatible with all CAD systems automatic head cleaning (eliminates the possibility of ink drying) a system that informs about paper breaks or paper shortages supply roll the design of the paper clamp during printing affects high print accuracy the ability to print short sheets without winding onto the take-up roll Effective Print Width 183 cm Maximum Print Speed ​​ 70 m2 / h Number of heads 2 Supported formats HPGL, HPGL / 2 Cartridges HP ™ 51645A # 45 Supply voltage < / td> universal with a frequency of 50 Hz ± 10% Power Consumption 110 W Operating Temperature 0-40 ℃ Plotter dimensions 230x120x70 cm Net weight 120 kg Package dimensions 267x56x47 cm 95x84x37 cm Gross weight 108 kg 18 kg Country of origin China

RT - 180E - large format plotter for printing patterns on paper. The RT-180E model replaces the RT-1800 and YT-1800 series plotters. The new model compares favorably with previous models by a reduced noise level during the operation of the plotter, a paper guiding system, which protects the edge of the paper from jamming, as well as from skewing during operation. The plotter allows you to completely abandon the need for scaling in the process of preparing the flooring for cutting. The plotter allows you to print roll-to-roll layouts. The compact design allows the plotter to be installed even in low-power enterprises. The modern design of the paper feeding system saves floor space and allows you to work in continuous printing mode. The low-cost and widely available consumables used in this series of printers avoid the hassle of purchasing and replacing them. Benefits: high print speed low noise < li> automatic head cleaning (eliminates the possibility of ink drying) the design of the paper clamp during printing affects high print accuracy the ability to print short sheets without winding on the take-up roll The plotter is compatible with all CAD systems Maximum print width 180 cm Print speed 70 m2 / hour Number of printheads 2 Data interface USB Cartridges HP11 Paper weight 28 - 250 grams Supply voltage 220 B Packing dimensions 245x55x50 cm 68x72x35 cm Gross weight 68 kg 20 kg Country of origin China < / td>

The Algotex IDEA large format plotter is the latest development in the latest generation of Algotex plotters. The plotter features increased printing speed. The Algotex IDEA model is equipped with an electronic system for automatic monitoring of the state of sensors and sensors, which continuously monitors the operation without stopping printing. Quiet plotter, compatible with all CAD systems. Benefits: increased print speed low noise compatible with all CAD systems printing at a constant speed, regardless of the density of the layout, the shape and size of parts, the number of inscriptions with other symbols patented electronic paper feed control system with error compensation selection of line thickness: standard or bold for each individual layout in the job queue automatic head cleaning electronic ink control advanced roll clamping system advanced job queue management simple roll clamping system Application: for printing ready layouts and patterns Effective print width 180 cm Average print speed 60 m2 / h < / tr> Number of heads 2 Supported formats HPGL / 2, ISO, STD, D6959 Cartridges HP ™ 51645A # 45 Fixed Accuracy with Uncertainty +/- 0.001m Supply voltage universal 50/60 Hz < td> Power consumption 100 W Operating temperature 10-40 ° C Plotter dimensions 251x89x32 cm Net weight 109 kg Package dimensions 267х109х47 cm Gross weight 163 kg Country of origin Italy

Modern cutting, drawing plotter. It is widely used in the manufacture of clothing, footwear, as well as the leather goods industry. The flatbed design of the plotter allows you to cut patterns with great precision. The plotter is ideal for cutting patterns, patterns. Advantages: ultra-precise cutting the special design of the knife allows you to cut a wide range of materials, such as cardboard , film, plastic, leather the material (paper, cardboard) is fed continuously from a roll or in the form of sheets. The conveyor feed system ensures the continuous operation of the plotter due to the fact that both drawing and cutting tools are attached to the plotter head at the same time, this type of plotter allows you to mark patterns and cut them with minimal loss of time associated with changing tools HP inkjet technology is used as a writing instrument, based on simultaneous printing with two HP11 cartridges with an uninterrupted ink supply system, which significantly reduces the cost of finished templates Application: < / p> for printing and cutting patterns Maximum paper width 165 cm Maximum cutting width 160 cm Cutting window length 100 cm Maximum cutting speed 1000 mm / s Types of materials < / td> cardboard, paper, self-adhesive Cartridge model HP11 Continuous Ink Supply System Material Weight 50 - 600 g < td> Cutting precision 0.05 mm Program precision 0.025 mm, 0.01 mm, 0.1 mm depending on option Command Language HPGL, HPGL2, PLT Paper Feed Method < / td> roll, single sheets Supply voltage universal with a frequency of 50 Hz ± 10% < tr> Power consumption 1500 W Country of origin China < / tbody>

Modern cutting, drawing plotter. It is widely used in the manufacture of clothing, footwear, as well as the leather goods industry. The tabletop plotter design allows you to cut patterns with great precision. The plotter is ideal for cutting patterns, patterns. Advantages: ultra-precise cutting the special design of the knife allows you to cut a wide range of materials, such as cardboard , film, plastic, leather material (paper, cardboard) is fed continuously from a roll or in the form of sheets due to the fact that both drawing and cutting tools are attached to the plotter head at the same time , this type of plotter allows you to mark patterns and cut them with minimal loss of time associated with changing tools Application: for printing and cutting patterns Working area 1500 * 1200 mm < td> Average cutting speed 35 cm / s Maximum cutting speed 60 cm / s Types of materials cardboard, paper, self-adhesive material Types of ink various shapes we handles Material thickness & lt; 2.0mm Cutting Accuracy 0.005mm Program Accuracy < td> 0.025 mm, 0.01 mm, 0.1 mm depending on option Command Language HPGL kompatybilny Paper transport gross, sheets Supply voltage universal with a frequency of 50 Hz ± 10% Power Consumption 110 W Country of origin China

Modern cutting, drawing plotter. It is widely used in the manufacture of clothing, footwear, as well as the leather goods industry. The tabletop plotter design allows you to cut patterns with great precision. The plotter is ideal for cutting patterns, patterns. Advantages: ultra-precise cutting the special design of the knife allows you to cut a wide range of materials, such as cardboard , film, plastic, leather the material (paper, cardboard) is fed in a continuous way from a roll or in the form of sheets due to the fact that both drawing and cutting tools are attached to the plotter head at the same time , this type of plotter allows you to mark patterns and cut them with minimal loss of time associated with changing tools Application: for printing and cutting patterns Working area 1200 * 900 mm < td> Average cutting speed 35 cm / s Maximum cutting speed 60 cm / s Types of materials cardboard, paper, self-adhesive materials Types of ink various forms handles Material thickness & lt; 2.0mm Cutting Accuracy 0.005mm Program Accuracy < td> 0.025mm, 0.01mm, 0.1mm depending on option Command Language HPGL Paper transport gross, sheets Supply voltage universal with a frequency of 50 Hz ± 10% < / td> Power Consumption 110 W Country of origin China < br>

The RT-1950B pen plotter is a vector type electromechanical device. The pen plotter displays the image thanks to the writing element - the pen, which is mounted in a special holder. The pen roll plotter has a pen that moves along one coordinate axis - one degree of freedom, but the media moves along the other axis using the gripper of the transport shaft. The convenient design of the paper feeding system saves the working area of ​​the room, allows you to work in continuous printing mode. The inexpensive and widely available consumables used in this series of printers avoid the hassle of purchasing and replacing them. Maximum print width 190 cm Writing Instrument Water Based Pen or Ballpoint Pen Maximum print speed 800 mm / s Pen pressure 25 - 500 g Step size 0.0254 mm / step Interface RS-232 Format Supported HPGL, DMPL Motor View Stepper Supply voltage 2A / 220 V or 2A / 110 V Operating temperature 5 - 40 ° C Acceptable paper weight 40 - 80 g Weight 88 kg

The RT-1350 pen plotter is a vector type electromechanical device. The pen plotter displays the image thanks to the writing element - the pen, which is mounted in a special holder. The pen roll plotter has a pen that moves along one coordinate axis - one degree of freedom, but the media moves along the other axis using the gripper of the transport shaft. The convenient design of the paper feeding system saves the working area of ​​the room, allows you to work in continuous printing mode. The inexpensive and widely available consumables used in this series of printers help avoid problems with their purchase and replacement. Maximum print width 120 cm Painting Tool Water Based Pen or Ballpoint Pen Maximum print speed 1000 mm / s Pen pressure 25 - 500 g Step size 0.0254 mm / step Interface RS-232 Format Supported HPGL, DMPL Motor View Stepper Supply voltage 2A / 220 V or 2A / 110 V Operating temperature 5 - 40 ° С Acceptable paper weight 40 - 80 g Package dimensions 176x39x37 cm Gross weight 42 kg

YT-1800JC is a new generation large format cutting plotter. The only plotter that combines an inkjet print head and cutting tool. Thanks to its simple and intuitive interface, the plotter can be used both as a large format plotter and as a cutter. The high speed of printing and cutting makes this model of the plotter demanded for the production of high power. Specially designed system of support of the plotters ensures maximum compactness and ease of use. Benefits: High print and cut speed Low noise Compatible with all CAD systems Automatic paper feed and tension control system Paper clamp design during printing, affects the high accuracy of printing and cutting Ability to print short sheets without winding on the take-up roll Effective printing width 180 cm Effective cutting width 170 cm Maximum printing speed 80 m2 / hourMaximum cutting speed1000 mm / sDrawing head2 cartridgesInterface for data transferUSBSupported formatsHPGL, DMPLPaper weight 50 - 350 grams Knife pressure 10 - 600 g Power supply universal with a frequency of 50 Hz ± 10% Power consumption 190 W Country - manufacturerChina

Large format Algotex XSTREAM 140 plotter is the latest development of the latest generation of Algotex plotters. The plotter features increased printing speed. The Algotex XSTREAM 140 model is equipped with an electronic system for automatic monitoring of the state of sensors and sensors, which continuously monitors the operation without stopping printing. Quiet, high rigidity, compatible with all CAD systems. Benefits: increased print speed low noise compatible with all CAD systems printing at a constant speed regardless of the density of the layout, the shape and size of parts, the number of inscriptions with other characters patented electronic paper feed control system with compensation errors selection of line thickness: standard or bold for each individual layout in the job queue automatic cleaning of the print head electronic ink control < li> advanced roll clamping system advanced job queue management simple roll clamping system Applications: < li> for printing ready-made layouts and patterns Effective print width 180 cm Average print speed 140 m2 / h Number of heads 4 Supported formats HPGL / 2, ISO, STD, D6959 Cartridges HP ™ 51645A # 45 Fixed accuracy with error +/- 0.001m Supply voltage universal with frequency 50/60 Hz Power Consumption 100 W Operating Temperature < td> 10-40 0С Plotter dimensions 253х87х30 cm Net weight 118 kg Package dimensions 285x120x60 cm Gross weight 185 kg Country of origin Italy

Plotter YT-1350QF - a large-format cutting plotter (cutter) has two working tools: writing and cutting tools. This plotter is suitable for making patterns with the simultaneous application of additional information to them. The cutting plotter can work both with sheets and with rolls of material, thanks to the separate motor control system, the user can configure the paper feed system. Using such a control system, the plotter can operate in roll-to-roll or floor-to-floor mode. Benefits: Fast printing and cutting speed Low noise level Compatible with all CAD systems Automatic control of paper feed and tension The design of the paper clamp during printing affects the high accuracy of printing and cutting < / li> Ability to print short decks without winding onto a take-up roll Compatible with all CAD systems Effective cutting width 120 cm Effective cutting width 110 cm < tr> Maximum print speed 1500 mm / s Maximum cut speed 1000 mm / s Writing head lead, gel refill Data interface USB Supported formats HPGL, DMPL Paper weight 50 - 350 grams Knife pressure 10 - 600 grams Supply voltage universal with a frequency of 50 Hz ± 10% Power consumption < td> 180 W Country of origin China < / ul>

The Pro9420WT is part of OKI's line of White Toner Technology (WT) printers, an original line of printers that offer more flexibility in using A3 color media, transparencies and transfer media Description < / p> The OKI Pro9420wt network laser A3 + white toner printer with its functionality is fully capable of meeting the various needs of designers, graphic studios, operational printing offices. OKI Pro9420wt printer provides printing on a wide range of media density up to 300 g / m2, including on colored paper, paper for thermal transfer, transparencies. At the same time, the device shows a high printing speed: for A4 size - 31 ppm; A3 - 16ppm. Performance and compact desktop-style design deliver brilliant pure white and brilliance in other colors and shades normally only achievable with expensive industrial equipment. Combining LED full color printing high resolution with white toner (WT) technology, the Pro WT series printers offer the flexibility to use a variety of A4 media, weights and lengths. Updated Pro series printers with white toner technology (WT) are able to cover areas white on many different colored surfaces, and can also be printed with toners of other colors to create vibrant designs on dark backgrounds. By overcoming all the traditional limitations of CMYK, print results match the design possibilities as T-shirts are now possible and promotional goods, small-run production and development of packaging design concepts, etching shop windows and printing on transparent film. Printing with white toner allows designers, graphic studios, shop decorators and other structures working with graphics, wide printing possibilities. Printer type LED Color color printing Maximum format A3 + Paper weight (max) 300 g / m2 Print speed (A4, b / w) 31 ppm Printing technology LED Print speed (A4, color) 31 ppm Print speed (A3, b / w) 16 ppm USB 2.0 / Ethernet / LPT connection interface Paper feed capacity 760 (530 + 230) sheets Number of pages per month 50000/8000 Placement Desktop Application area Small office Number of colors 4 Resolution for b / w printing (max) 600 x 600 dpi Resolution for color print (max) 1200 x 600, ProQ2400 Multi-level technology dpi Print speed (A3, color) 16 ppm Warm-up time up to 85 sec First print out time (b / w) 10.5 s First print out time (color) 10.5 s Paper weight (min) 64 g / m2 Color cartridge / toner resource 15000 pages Yield h / w cartridge / toner 8000 (white) pages Number of cartridges 4 PostScript support Yes Support PostScript 3 emulation Number of PostScript fonts installed 136 Paper feed capacity (optional) 2880 sheets < br> Paper output (standard) 700 (500 face down and 200 face up) sheets Bypass paper capacity 230 sheets. Stapler None Memory (standard) 512 MB Memory ( max) 1024 MB PowerPC 750 processor 800 MHz processor frequency Supports Windows Vista (32-bit and 64-bit) / 2000 Workstation (SP3 or earlier) / 2000 Professional (SP3 or earlier ) / Server 2000 (SP3 or earlier) / Advanced Server 2000 (SP3 or earlier) / XP Professional (32-bit and 64-bit) / XP Home / Server 2003 (32-bit and 64-bit) / Server 2008 (32-bit and 64-bit) / Server 2000 (SP4) + Citrix MetaFrame XP Presentation Server Feature Release 4 / Server 2003 Standard Edition + Citrix MetaFrame XP Presentation Server Feature version 4/7 (32-bit and 64-bit); Mac OS X 10.3.9 - 10.6.7 / 10.7.x Power consumption (during operation) 780 W Power consumption (in standby mode) 200 W Noise level during operation 54 dB Level noise in standby mode 42 dB Dimensions (W) 654.5 mm Dimensions (H) 471 mm Dimensions (D) 623 mm Weight 76 kg

New range of textile printers! High-speed white on black printing function. CMYK + WHITE in one pass. Resolution up to 1200 dpi. 6 heads (CMYK + 2 WHITE) Technical upgrades possible. Description BROTHER GT-3 series printers are designed for direct printing on textiles. The main buyers of this technique are advertising agencies, companies offering printing on T-shirts for individual designs, as well as small-scale production. The series is represented by three models Brother GT-341, Brother GT-361, Brother GT-381. These models have replaced the GT-541, GT-782 printers, which have proven themselves well in the market. Brother GT-341 starter model allows you to print on white CMYK colors using four Brother branded printheads. The GT-361 and GT-381 printers allow you to print on dark by applying white ink to the base of the picture with two or four print heads, respectively. The GT-341 and GT-361 can be upgraded to the next in the series using a conversion kit that is purchased separately. The unique Japanese technology allows to increase the printing speed due to sequential spraying of first white ink and then color, and all this in 1 pass of the print head over the product. A distinctive feature of the series is the ability to print in high resolution up to 1200 x 1200 dots per inch. For simple drawings, you can select a lower resolution to save ink. In line with BrotherEarth's philosophy, water-based printer ink is harmless even for small children from 3 months old and does not contain hazardous ingredients (Japanese OEKO standard -TEXStandard 100). Products printed on the printer have a washing resistance class of 4 out of 5 according to the European classification. Downloading images for printing is carried out via a network cable or via USB. The image can be created in any well-known graphic editor and then sent to print with one button using a special GT-3 printer driver. All equipment and printheads are provided with a BROTHER brand warranty. The Brother GT-3 printer is the choice of companies that value print quality, ease of use, performance and reliability backed by Brother, the worldwide renowned direct print specialists. Features < / p> Code 00000093559 Power , W 550 Length without packing, m 0.105 Width without packaging, m 0.138 Height without packaging, m 0.066 < tr> Volume 1 Gross Weight: 230 Net weight 200

For Solvent printersThe Konica Minolta 512 MN printhead is compact and offers high-resolution and high-speed. It is suitable for both wide format and industrial applications. The KM512 MN printhead (14 picoliter) is suitable for high quality 720 dpi multi-pass printing. This is the original print head of Seiko Colorpainter and HP 9000/10000 printers. This print head is compatible with a wide range of printers as specified in compatibility. Used For: HP designjet 9000s, Seiko Colorpainter 64S / 100S, HP Designjet 9000 / 10000, Oce CS 6060 / CS 6100, DGI ST1806, Anapurna M/XL and other printers made in China. Product NameKM512LKM512MKM512SDrive ModePiezo Drop-On-DemandNozzle Resolution180dpi*2 rows = 360dpiNozzle Number256 nozzles*2 rows = 512Nozzle Spacing70.5μm =(141um 2 rows)Drop Volume42pl14pl4plFiring Frequency7.6kHz12.8kHz23.0kHzPrint Width36.1mmDimensions67mmW*40mmD*72mmHSolvent InkOKOKOKUV InkOKOKOKOil InkOKOKOKMax. Drops in Greyscale-3 drops7 dropsWith Heater (H)AvailableAvailableAvailableWithout Heater (N)AvailableAvailableN.A.Industrial Inkjet Print Head best-suited for Versatile ApplicationsShear mode, Piezo On-Demand Print Head Piezo on-demand inkjet ejects ink drops utilizing deformation of small ink chambers composed of piezoelectric material, by applying electric field in accordance with signals. The principle of shear mode piezo actuation with shared wall structure allows lower power consumption as well as a high-density nozzle array. 512 Nozzle with 360 dpi Spacing High resolution, 360 nozzle per inch spacing has enabled arranging 512 Nozzle on a comactly designed print head. The KM512 series consists of type L, M and S, corresponding to unit drop volume capabilities of 42pl, 14pl and 4pl respectively. The type M and S can be driven in 4 level grey-scale mode for reproducing high quality images with smoother tones. Compatible with Solvent, UV, Oil. Due to its specially designed internal structure, the KM512 series boasts a wide range of ink compatibility, including aggressive solvent inks typically used for super-wide format printers. Inks which have high viscosity at room temperature, such as UV ink, can be heated up to 55 degrees Celsius with the H type's internal heater. Enabling Comapct Design of Head Mount System This series is specially designed to have a "wing" structure so that users can precisely align the print heads without difficulty. This feature allows easy combination of page-width printhead units for the purpose of single-pass high-speed printing. The same external design allows interchangability of different type heads on the same mount system. ApplicationsOutdoor Signage Outdoor signage is one of the most promising markets for industrial inkjet prinitng. With the capability to print on various substrates at high productivity, large format inkjet printers have been continuously replacing the analogue screen processes. . Indoor Graphics The large format inkjet printers are also widely utilized for reproduction of high quality indoor graphics used in restaurants and shopping moles. Super fine ink droplets have enabled reproduction of photo grade images on a variety of substrates. . Label Printing Demand for high speed, commercial label printing of variable data such as barcodes and individual addresses is ever increasing. Inkjet technology is best suited to provide solutions to the label industry. . Material Deposition Not limited to printing applications, the inkjet technology is expanding its usage to other fields such as LCD color filter manufacturing and circuit patterning. Konica Minolta IJ provides solutions to electronic device manufacturing industry with its renowned precise DOT placement technology. . Textile Printing Introduction of inkjet has dramatically simplified the workflow of analogue textile prinitng by eliminating laborous plate making processes. Digital inkjet textile prinitng, which can reproduce rich colors and delicate tones with high productivity, has been attracting attention in this industry as well.

510 Nozzles Binary Printhead Series Active Print Width72mm No. Of Active Nozzles510 Firing Frequency8KHz Drop Volume35pl (Binary) Used for: Infiniti, GZ, inkjet printers, Roland AJ1000I Original Japanese piezo SEIKO SPT510/255 inkjet printheads which feature 510/255 active nozzles and long useable life to produce high quality output at 720dpi resolution. Original Japanese drop on demand piezo printhead with steel plate protected, 510 active nozzles/printhead, 71.8mm printing width. 6 color plus 720dpi makes unmatchable color and high resolution. The voltage of the printhead, automatically adjustable to the temperature, prevents blockage caused by the change of temperature. Edge feather function can blur the pass line and feather the pass edge. Delicately designed alloy-aluminum platform.TechnologyDrop On Demand PiezoActive Nozzles510Native Resolution180 dpiActive Print Swath2.8 inches(71.8mm)Drop Volume35 plFiring Frequency6-8 KhzLinear Print Speed0.49 Pin Proprietary parallel I/FDimensions4.95 in W * 3.48 in H *1.18 in D125.5mm W * 88.5mm H *30mm DWeight.00441b(200g)

Brand New Printheads for Mutoh printers. These are solvent resistant and are completely compatible with Solvent, EcoSolvent, Mild Solvent and Aqueous (pigmented & dye) inks. They are made in Japan - This printhead have the Head Rank numbers that will work with Mutoh printers. The recommended manufacturer procedure is to replace both dampers with every head change to prevent possible contamination from old ones.