Open chat

Medical equipment in bulk on Qoovee

USD 1.14/pcs 1.14
A metal spatula is a double-sided tool with two spatulas of different shapes on opposite ends. The specialized shape of the blades is adapted to perform various operations required in laboratory practice: removing sediments from the filter, stirring the solution, grinding loose and pasty substances, transferring small amounts of a substance to another dish. The spatula is made of alloy steel, therefore, it is resistant to chemicals, high temperatures, and mechanical stress. Metal spatulas are in demand in various laboratories, because very durable, easy to clean, can be sterilized by various methods, chemical or autoclave.
USD 9.13/pcs 9.13
Tweezers-spoon PS 140-14 is designed to work with medicinal powders and tablets in medical and health institutions. Thanks to the use of tweezers-spoons, it is possible to comply with the mandatory sanitary standards when working with medicines. In addition, the spoon tweezers are convenient for dosing medications. Tweezers-spoon are made of special stainless steel, which is allowed for contact with food and medicine. The instrument washes well, does not rust, it can be sterilized by all available methods: chemical, autoclaving, dry hot air. The product is resistant to chemically active substances.
USD 10.62/pcs 10.62
The medical tray for instruments and manipulations is useful in a hospital, laboratory, in everyday life. Design features: the tray has a rectangular shape, is not equipped with a lid. Its capacity is 3 liters, length 40 cm, width 30 cm, depth 4 cm. The upper edge is equipped with a flat edging and is injury-free. Material: the product is made of robust and chemically resistant stainless steel, durable, resistant to disinfectants and high temperatures. The tray can be autoclaved, mechanically or dry cleaned. Rectangular medical tray is used to store barbed or cutting edge surgical instruments, thermometers, pipettes; for the distribution of medicines to wards; to prepare instruments for various manipulations in treatment rooms or directly in wards. TU 9451-002-70373441-2005 Registration certificate No. FSR 2010/07887 dated May 27, 2010 Characteristics Manufacturer country Russia Volume, ml 3000 The size 400х300х40 mm
USD 2.63/pcs 2.63
Conical flask, version 2 in accordance with GOST 25336-82. The diameter of the cylindrical neck is 34 mm, the capacity of the vessel is 500 ml. It is convenient to mix solutions in flasks of this type, carry out various experiments, and use them as a receiver for distillation. They are also used to store various substances, solutions, samples. The neck of this flask is without a thin section, so it can be sealed with a plastic, silicone or rubber stopper. The cork can be bought at our store.
USD 4.8/pcs 4.8
Laboratory flask with a long neck, a round bottom and a branch tube. The product with a capacity of 125 ml is made in accordance with GOST 25336-82, made of heat-resistant glass, has high strength characteristics. The Engler flask is used in the ARNS apparatus for operations related to the distillation of oil and various petroleum products, such as gasoline, fuel oil, diesel fuel, etc. In addition, this vessel can be used for the distillation of liquefied gases, for example, a propane-butane mixture.
USD 2.85/pcs 2.85
Лабораторная капельница со шлифом горла, выполненная из стекла ХС-3, или же НС по ГОСТ 25336-82. Изделие округлой формы с длинным носиком предназначено для отмеривания необходимого объема невязких жидкостей, а также для дозирования веществ-индикаторов.Данный инструмент универсален и может применяться в различных аналитических, научно-исследовательских или производственных операциях. Благодаря шлифу горловины капельница Шустера может быть присоединена к соединительным инструментам или лабораторным емкостям с керном.Изделие найдет применение в лабораториях химической, биологической, медицинской и других отраслей.
USD 0.13/pcs 0.13
Laboratory stirrer 20 cm long, made in accordance with GOST 25336-82. The tool is made of glass of the XC-3, HC-3 brands. Designed for mixing various solutions and chemical reagents. It can be used without restrictions in almost any industry - in medicine, chemistry, biology, pharmaceuticals, etc. The length of the agitator allows it to be used with large vessels or containers with an extended neck. Due to the chemical resistance of the glass, the mixer can be used with hot or aggressive liquids. The stirrer is convenient, practical and versatile.
USD 0.15/pcs 0.15
High-quality and durable laboratory stirrer, the length of which is 25 cm, made in accordance with GOST 25336-82. The product is characterized by high performance and is designed for mixing various chemicals. The stirrer is made of chemically resistant, neutral glass of the XC-3, NS-3 brands The tool is universal and can be used in medicine, microbiology, food industry, pharmaceuticals, etc. The properties of the glass from which the stirrer is made allow it to be used for work with highly heated or aggressive chemicals.
USD 6.07/pcs 6.07
Drexel flask with thin section, made in accordance with GOST 25336-82 from high-quality transparent glass of the TC brand (heat-resistant). The product, the capacity of which is 100 ml, is intended for washing gases and cleaning them from various impurities. In some cases, a vessel is used to determine the composition of gases. It is important to note that the Drexel flask shows the best efficiency at low gas velocities. The rinsing containers can be connected in series for better cleaning performance.
USD 25.81/pcs 25.81
Laboratory bowl made of absolutely transparent quartz glass. The 200 ml jar has a comfortable spout and is highly thermal and chemical resistant. As a rule, vessels of this type are used for crystallization and evaporation of various reagents to a dry residue, however, they can store liquids or bulk substances that do not need to be closed with a lid. When working with quartz laboratory glassware, remember that it is only suitable for neutral substances or acids, but not suitable for alkaline reagents. The product is highly durable, resistant to temperature extremes and does not require special maintenance. The quartz transparent bowl will find application in any production or research laboratory and will last a long time. Characteristics Volume, ml 200 Height, mm 50 Heat resistance ° С up to 1250
USD 5.12/pcs 5.12
Лабораторная пробирка объемом 10 мл, с круглым донышком. Предназначена для широкого спектра работ с жидкостями нейтрального или кислого характера.Данная пробирка выполнена из качественного кварцевого стекла, что обеспечивает ей отменную прочность и устойчивость к быстрым и значительным перепадам температуры. Важно заметить, что кварцевое стекло также обладает высокой оптической гомогенностью, что позволяет без труда вести визуальные наблюдения за содержимым лабораторного сосуда.Пробирки такого типа являются одним из наиболее востребованных элементов любой современной лаборатории, они надежны и практичны.ХарактеристикиОбъем, мл 10Термостойкость °С до 1250
USD 5.71/pcs 5.71
Laboratory spirit lamp with a volume of 100 ml. Made of high quality chemically resistant glass. Designed for work involving heating liquids in an open flame or melting solids. In addition, using an alcohol lamp, you can sterilize instruments with an open fire. It is recommended to use this alcohol lamp with small laboratory vessels such as test tubes. The product can be used in laboratories or in other premises where there is a need. It is important to observe safety measures when working with open flames. Laboratory spirit lamp meets the requirements of GOST 25336-82
USD 9.13/pcs 9.13
The tubes are most conveniently stored in such racks. They will not break in them, each tube can be easily removed if necessary and placed in a socket of a suitable diameter. Silicone clips ensure a secure hold of the tubes. The rack is lightweight, rather compact, takes up little space both on the table, filled with test tubes, and without test tubes - in this case, the racks can be folded into one another. In our store, you can choose to buy not only a tripod, but also a variety of test tubes, as well as other medical and laboratory supplies. Affordable prices and a wide range of products will pleasantly surprise you.
USD 2.28/pcs 2.28
Laboratory rack for storage of tubes with outer diameter up to 18 mm. Design features: rectangular rack, two-level, with 20 slots for tubes. The upper level - with through holes for the tubes, the lower one - with sockets that support the bottom of the tube. The side walls of the tripod act as legs and guarantee stability on the table. Material: aluminum. The tripod is strong, wear-resistant, durable, easy to clean, and sterilized at high temperatures. Aluminum is chemically resistant, so it does not corrode from accidentally spilled reagents. This model is designed to store and transport twenty test tubes. The product can be used in a water bath. Dimensions, mm 210x65x94 Number of sockets, pcs 20 Socket diameter, mm 18
USD 89.07/pcs 89.07
Specialized rack for 40 tubes. The peculiarity of this model is that with the help of the support it can be installed at any angle to the horizontal surface. This design is in demand in biological and microbiological, research laboratories for filling agar media, for installing slanting agar tubes. The rack is made of stainless steel, washable and can be used for sterilizing test tubes in a dry air cabinet. The support of the rack can act as a convenient handle with which the product, together with the test tubes, can be carried around the laboratory. Characteristics Manufacturer country Russia Height, mm 87 Width, mm 170 Working surface width, mm 120 Number of holes for test tubes, pcs 40 Test tubes size, mm 16x150
USD 3.43/pcs 3.43
The striker is a glass rod with sharp cone-shaped tips on both sides and a bulge in the middle. This thickening does not allow the striker to pass through the funnel into the flask with the solution being prepared and prevents fragments of the ampoule from entering the flask. Material: durable glass. Method of application: a funnel is inserted into the flask in which a solution with a standard titer will be prepared, a striker is inserted into the funnel. An ampoule is placed on top of it, with a recess on the tip. Hold the ampoule with your hands. Depending on the shape of the ampoule, another firing pin is placed on the upper recess and hit on it so as to pierce the ampoule from both sides. Sometimes they act differently: the ampoule is struck on the striker, breaking its bottom, and then from the side they strike with another striker into a special depression, breaking it from above. The ampoule, glass fragments and funnel are thoroughly washed with distilled water from a washing bottle. The amount of water should be 6 times the volume of the ampoule. Next, the solution is prepared according to the instructions.
USD 6.51/pcs 6.51
Test tube rack is a convenient laboratory accessory for storing, transporting, heating or autoclaving tubes. Made of polypropylene, a chemically and thermally resistant plastic that can be autoclaved at temperatures up to +120 ° C. Design features: a three-level tripod, all three levels are connected by rods at the corners. The lower level - the base - is a solid plate on which the test tubes rest. Middle and upper level - plates with 18 tube slots. The diameter of one socket is 30 mm. Three fixation points allow the tubes to be held securely in an upright position. Alphanumeric markers are printed on the slotted plates to accurately locate each tube. Plastic tube rack is lightweight, easy to clean, durable. Registration certificate No. FSZ 2011/09223 dated March 19, 2012 Characteristics Manufacturer country Italy Height, mm 75 Width, mm 110
USD 1.66/pcs 1.66
The product is a vessel with a spherical base and a narrow neck, ground at the top. The edge ends with a rim. The flat bottom makes the flask stable and does not require a stand. GOST 25336-82 The flat-bottomed spherical flask with a ground neck is one of the most popular vessels in chemical laboratories. With the help of such flasks, it is possible to assemble installations, since the interchangeable cone allows the vessel to be hermetically connected with other flasks or connecting elements. Flasks are used as vessels-reactors, vessels-receivers; for preparation and storage of solutions; for filtration, evaporation, heating and many other tasks. Characteristics Manufacturer country Russia Volume, ml 250 Height, mm 140 ± 3.0 Section 29/32 Wide part diameter 85 ± 2.0
USD 2.97/pcs 2.97
Flask with a spherical base, diameter 166 mm, a flat bottom and a neck for a rubber or silicone stopper. The edge of the neck is protected by a rim. Material: glass, inert to most chemicals, does not react with them, does not change the composition of the reaction mixture. Standards: the product is made in accordance with GOST 25336-82. The 2 L flask can be used for various purposes: solutions can be prepared and stored in it; use it for synthesis, distillation, filtration. As part of the promotion in our store, you can purchase this and other types of flasks at very competitive prices. Characteristics Manufacturer country Russia Volume, ml 2000 Height, mm 250 ± 4.0 Throat diameter, mm 50 ± 2.0 Wide part diameter 166 ± 3.0
USD 2.57/pcs 2.57
The flask is a flat-bottomed glass vessel made of light glass. The neck of the vessel is hermetically sealed with a ground glass stopper. For guaranteed isolation from the environment, there is also a glass cap, also ground in - it is put over the cork on the neck of the bottle. This product is used to measure biochemical oxygen demand (BOD). To do this, the test water sample is incubated under strictly controlled conditions and the amount of oxygen is measured before incubation and after a certain amount of time has passed. The change in the amount of oxygen in the sample characterizes the amount of organic matter that is oxidized by oxygen. The flask is used in biological, biochemical, medical, chemical research, for water quality control. Characteristics Manufacturer country Russia Volume, ml 150 Diameter, mm 77 Height, mm 145
USD 0.29/pcs 0.29
The 400 ml low beaker is designed for handling solutions and liquids. It is possible to prepare and temporarily store solutions in it, heat them in a water bath, settle liquids with a precipitate, and filter solutions. The beaker can be used as a receiving vessel in chemical plants. A vessel of the same diameter over its entire height (cylindrical). The upper edge has a funnel-shaped outward sweep, is protected by a thickened rim and is equipped with a spout. Characteristics Manufacturer country Russia Volume, ml 400 Diameter, mm 80 ± 2.0 Height, mm 110 ± 3.0
USD 0.17/pcs 0.17
A glass stopper with an interchangeable cone is a versatile accessory required in any laboratory. With its help, flasks, vials, flasks, cylinders with polished necks, with a thin section 14/23 are sealed. The hollow cork is made of quality glass that can withstand harsh chemicals. Characteristics Manufacturer country Russia Section 14/23
USD 0.46/pcs 0.46
The beaker is a flat-bottomed vessel that is stable on a table and has the shape of a truncated cone, slightly expanding upward. The neck is equipped with a spout for complete and accurate drainage of solutions. The vessel is made according to GOST 1770-74 from glass with a low expansion coefficient. Beakers are used for the preparation of solutions, for filtration and settling of liquids, for household purposes, for temporary storage, for pouring, pouring substances. Characteristics Manufacturer country Russia Volume, ml 250 Height, mm 120 Throat diameter, mm 75 Base diameter, mm 55
USD 1.14/pcs 1.14
The jar is designed to store various chemicals. Due to its rather large capacity and wide throat, it can store liquid, viscous, free-flowing reagents, as well as materials in granular form and large pieces. The jar is suitable for storing samples, mineral samples, soil. The container is equipped with a plastic screw cap and a plastic seal for airtightness. The outer side of the cover has vertical grooves for a firm and comfortable hand grip. The jar is high, with a round, stable base. Made of green transparent glass. Characteristics Manufacturer country Russia Volume, ml 1000 Throat diameter, mm 63
USD 93.06/pcs 93.06
Прибор для отбора проб различных жидкостей из промышленных емкостей большой глубины.Особенности конструкции: поставляется вместе с тросом длиной 5 или 10 м для отбора проб, и заземляющим тросиком с зажимом, обеспечивающим взрывобезопасность. Длина тросика 1,4 м. С помощью пробоотборника можно брать образцы технических жидкостей с заданной глубины; глубина может варьироваться, в зависимости от задачи, от 0 до 10 м.Пробоотборник компактен, весит всего 1,7 кг. Корпус выполнен из стали. Подойдет для взятия образцов как из транспортных цистерн, так и из стационарных резервуаров.Стандарты: соответствует следующим нормативным документам — ГОСТ 2517—85,ГОСТ 52659,ISO 3170: 204,ASTM-D4057-95.Пробоотборник востребован в экспертных организациях и лабораториях контроля качества. Рекомендуется для отбора проб нефтепродуктов: бензина, керосина, дизельного топлива.
USD 396.46/pcs 396.46
Качающий шейкер Dragon Lab SK-R1807-E разработан для бережного смешивания сред для проведения различных исследований. Благодаря тому, что смешивание происходит автоматически, лаборант может добиться быстрого и равномерного смешивания и одинаковых условий при проведении серии экспериментов.Прибор позволяет регулировать скорость вращения в промежутке от 0 до 80 об/мин. Время контролируется вручную кнопкой «вкл/выкл». Максимально допустимый вес с платформой — 3 кг.Шейкер компактен, его можно применять в инкубаторах, термостатах, холодильниках. Поставляется с алюминиевой платформой и противоскользящим ковриком, который не дает сосудам двигаться по платформе во время работы устройства.Если необходимо, можно приобрести специализированные платформы для разных видов сосудов.ХарактеристикиГабаритные размеры, мм 270×330×130Масса (кг) 3,2Напряжение, В 100-240Частота, Гц 50/60Мощность, Вт 20Принцип работы мотора мотор постоянного токаДиапазон скоростей, об/мин 0-80Доп. тем. окружающей среды, ℃ 5 - 40Доп. относит.влажность 80%Смешивающие движения качающиеКласс защиты в соотв. с DIN EN60529 IP21Угол вращения ° 7Макс нагрузка с платформой, кг 3
USD 31.97/pcs 31.97
Данный прибор предназначен для процедурных кабинетов лечебно-профилактических учреждений, но может применяться в лабораториях, при проведении различных исследования, когда требуется напоминание об окончании определенного отрезка времени. Для этих же целей таймер подходит для использования в быту. Прибор настольного исполнения.Таймер механический, рассчитан на отмеривание временный отрезков не более 1 часа. Очень прост в эксплуатации, снабжен большим циферблатом с крупными, хорошо различимыми цифрами и контрастной шкалой, отградуированной в минутах. Цена деления — 1 минута. Временной отрезок выставляется поворотом указательной стрелки на нужную продолжительность с точностью до минуты. По окончании установленного временного отрезка таймер подает звуковой сигнал.Срок службы, в среднем, составляет не менее 10 лет, то есть прибор весьма долговечен.ХарактеристикиСтрана - производитель РоссияГабаритные размеры, мм 86х86х70Вес, гр 350Диапазон рабочих температур, °C 5 - 40Диапазон выдержки времени, мин 1 ÷ 60Относительная погрешность выдержки времени отключения, % ± 8Длительность звукового сигнала (не менее), сек 5
USD 37.11/pcs 37.11
The device with which the content of resinous substances in oil products is determined, some other studies are carried out - in particular, they find out the amount of impurities (sand, mineral salts, clay, etc.) and water in oil, as well as the content of sand in clay samples (solutions ). The Lysenko oil sump is made of chemically resistant glass. Measurement limits, ml Division value, ml 0-7 0.1 7-10 0.5 10-20 1.0 20-50 5.0 50-100 10.0 100-500 25.0 Characteristics Manufacturer country Russia Diameter, mm 54 Height, mm 490 Graduated part capacity 500
USD 8.22/pcs 8.22
Цилиндр Снеллена представляет собой высокий и узкий сосуд с плоским дном, с измерительной шкалой на боковой поверхности. На стенке цилиндра, в нижней его части, расположена тонкая отводная трубка для спуска воды. На отводную трубку при проведения исследования надевают трубку с зажимом.Применяется цилиндр Снеллена для исследования прозрачности воды. Пробу наливают в цилиндр и поднимают наполненный сосуд на 40 мм над лежащим горизонтально листом со шрифтом Снеллена. Смотря на шрифт, лаборант сливает воду через отводную трубку. Чем ниже будет столбик воды, через который хорошо виден шрифт, тем менее прозрачна вода.Существуют нормы, регламентирующие прозрачность питьевой, водопроводной и другой воды.ХарактеристикиДиаметр, мм 52Высота, мм 330Цена деления, мл 5Диапазон шкалы, мм 300
USD 3.16/pcs 3.16
The laboratory alcoholometer (hydrometer) is a professional instrument. It is used to determine the concentration of ethyl alcohol in water. It is also called an alcohol hydrometer. It can be used not only in laboratories, but also in everyday life, in production. Professional alcohol meters ASP are calibrated for measurements at a liquid temperature of 20 degrees. The error does not exceed the scale division. The values should be marked along the lower edge of the meniscus. Initial check of ASP models is carried out at the factory. Note! Each hydrometer we sell is different: 1. High quality. The glass tubes used to make the devices are sourced from Germany. 2. Practicality. 3. Long service life.
USD 1.1/pcs 1.1
Multifunctional Y-piece for connecting tubing. Used in laboratory or industrial installations, for example for connecting bends, vacuum lines, etc. The adapter is made of high quality polypropylene and can withstand autoclaving.
USD 0.95/pcs 0.95
An adapter used to connect various pipes, straight and seamless. Material - high quality polypropylene, resistant to many aggressive substances. Withstands high heating temperatures, so it can be hot steam treated and autoclaved. When autoclaving, it is necessary to set the standard mode - 1 atm, 110 ° С. Polypropylene adapters are of high quality and durable, therefore they are widely used for connecting pipes. Characteristics Nominal outer diameter, mm 8/9/10 Hole, mm 4.5 Outer ridge diameter, mm (max./min.) 6,3 / 9/11
USD 0.8/pcs 0.8
A nylon bristle brush designed for thorough cleaning of the inside of bottles and other narrow pharmaceutical laboratory vessels. Wire handle. A convenient high-quality brush with soft synthetic bristles will be extremely useful wherever there is a need to clean narrow and long dishes - in the laboratory, in production, in the food industry, etc. Characteristics Length mm 320 Working part length, mm 100 Working part diameter, mm 60
USD 0.69/pcs 0.69
The long, small diameter brush is designed for thorough cleaning of the interior of test tubes and other small, narrow dishes. The soft synthetic bristles (nylon) will not scratch the glass or plastic of which the container is made. A convenient high-quality ruff is indispensable not only in pharmacy and chemical laboratories, but also everywhere where reusable narrow-shaped or narrow-necked dishes are used for various jobs. Characteristics Length mm 280 Working part length, mm 100 Working part diameter, mm 25
USD 1.48/pcs 1.48
An important component of the vacuum pump, a tube with the largest diameter of 14.5 mm and the smallest diameter of 9 mm. Has a length of 37 cm. Polypropylene is a modern, high-quality and durable material, therefore both polypropylene vacuum pumps and tubes made of this material serve for a long time and do not present any difficulties in their care. In the Prime Chemicals Group store, you can buy the pump itself, of which this tube is a part. Characteristics Manufacturer country Italy Length mm 37 Largest / smallest diameter, mm 14.5 / 9
USD 0.3/pcs 0.3
Disposable pipette used for serological testing. Sterilized by gamma rays, sold individually. Graduation is applied with black indelible paint. At the top end there is a filter, the color of which is regulated by international standards. For serological pipettes with a volume of 2 ml, it was found that they are equipped with a green filter. The product is not cytotoxic, pyrogen-free, and has no hemolytic effect. The main overflow scale continues with a negative scale. Made of modern material - crystalline polystyrene. Registration certificate No. FSZ 2012/11857 dated March 28, 2012 Characteristics Manufacturer country Russia Volume, ml 2 Division value, ml 0.1 Length mm 278 Nominal outer diameter, mm 6.5
USD 0.32/pcs 0.32
The conical plug with a ground cut has an ergonomic shape that makes it easy to remove from the container. Suitable for use with any container, the neck of which fits the cork in size. Suitable for sealing vessels containing easily evaporating, volatile substances. Also protects the contents of vessels from debris and dust. If the container tilts or even falls without breaking, the stopper will prevent its contents from falling out or flowing out.
USD 0.08/pcs 0.08
Samples, materials and samples of various substances are usually stored in sealed tubes. Because tubes are often sold without caps, they must be purchased separately. Made of high quality polyethylene, these covers are an excellent choice. The well-thought-out shape of the stoppers allows you to easily and quickly seal the tube, and if necessary, you can open it without effort. The stopper fits snugly against the tube so that the contents of the container will not spill. The corks are multi-colored, so they can serve as additional filters to help differentiate the contents and reduce the risk of accidentally picking up the wrong tube. Registration certificate of stoppers for 16 mm test tubes - No. FSZ 2011/09223 dated February 25, 2011
USD 1.6/pcs 1.6
Laboratory jar with graduation. A 50 ml vessel is made of durable polypropylene and can be used for storing liquid and bulk substances. The wide mouth with a diameter of 24 mm makes it easy to place substances in the vessel and to remove them with the same ease. This container can withstand high temperatures, which allows it to autoclave, and also to pour hot liquids inside. The product is universal, it can be used for various research or production work. Due to the strength and wear resistance of the material, the can will last a long time. Characteristics Manufacturer country Italy Volume, ml 50 Height, mm 88 Throat diameter, mm 24 Division value, ml ten
USD 1.03/pcs 1.03
A plastic measuring cup is a convenient tool for a laboratory assistant. It is made of high quality stabilized polypropylene, which is hard, heat and chemical resistant. It can be used in much the same way as a glass beaker, it cannot only be heated on stoves and burners. Can be sterilized in an autoclave or by boiling, since the permissible temperature for long-term operation without consequences for the product is up to +130 ° C. The glass is equipped with a handle, a spout and a relief measuring scale in milliliters. The scale is approximate. The container is suitable for working with various materials in liquid and free-flowing form, for preparing solutions, filtering, settling liquids with sediment. Characteristics Volume, ml 500 Height, mm 115 Throat diameter, mm 85 Division value, ml 25

The official Qoovee website helps you make profitable deals, find a supplier and manufacturer to grow your business. In the “Directory of suppliers” section you can find for yourself everything you need: Medical equipment from Russia, Kyrgyzstan, Kazakhstan, Turkey, Ukraine and other countries. Product categories are constantly updated. Wholesale suppliers are looking for wholesale purchases and partnerships and are ready for mutually beneficial cooperation.

Write to us, we are online!