Industrial Equipments and Machines in bulk on Qoovee

Automatically transformers (variac transformers) are used to smoothly adjust the AC voltage in various works related to electrical engineering. They are most often used to change the voltage in household appliances, construction. Specifications:   Rated power, VA 30000     Maximum current, A 120     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 39.5х32х113.5     Weight, kg. 107   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.

Automatically transformers (variac transformers) are used to smoothly adjust the AC voltage in various works related to electrical engineering. They are most often used to change the voltage in household appliances, construction. Specifications:   Rated power, VA 20000     Maximum current, A 80     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 39.5х32х56     Weight, kg. 60   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.  

Automatically transformers (variac transformers) are used to smoothly adjust the AC voltage in various works related to electrical engineering. They are most often used to change the voltage in household appliances, construction. Specifications:   Rated power, VA 15000     Maximum current, A 60     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 39.5х32х56     Weight, kg. 53   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.  

Automatically transformers (variac transformers) are used to smoothly adjust the AC voltage in various works related to electrical engineering. They are most often used to change the voltage in household appliances, construction. Specifications:   Rated power, VA 10000     Maximum current, A 40     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 29x25x40     Weight, kg. 33   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.  The use of imported instruments and equipment powered by voltage other than 220 Volt is impossible without a source of operating voltage. Variac transformer (laboratory autotransformer) with adjustment allows you to save the owners of machinery and equipment from the headache of finding a universal solution to the problem (the desired voltage), as it allows you to get 10 and 70 and 110 and 150 Volts with a slight movement of your hand, up to 300 Volts AC 50 Hz frequency of different current (up to 50 Amps) by adjusting the Variac transformer to the desired voltage. Variac transformers SUNTEK with adjustable output from 0 to 300 volts are available for different capacities.

Automatically transformers (variac transformers) are used to smoothly adjust the AC voltage in various works related to electrical engineering. They are most often used to change the voltage in household appliances, construction. Specifications:   Rated power, VA 7000     Maximum current, A 28     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 25x25x27     Weight, kg. 19   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.

Automatically transformers (variac transformers) are used to smoothly adjust the AC voltage in various works related to electrical engineering. They are most often used to change the voltage in household appliances, construction. Specifications:   Rated power, VA 5000     Maximum current, A 20     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 25x25x27     Weight, kg. 17   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.

Specifications:   Rated power, VA 3000     Maximum current, A 12     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 20x21x23     Weight, kg. 10   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.

Specifications:   Rated power, VA 2000     Maximum current, A 8     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 19x18x21     Weight, kg. 8   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.  

Specifications:   Rated power, VA 2000     Maximum current, A 8     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 19x18x21     Weight, kg. 8   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.  

Specifications:   Rated power, VA 500     Maximum current, A 2     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 14x13x15     Weight, kg. 3.5   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.

Specifications:   Rated power, VA 20000     Maximum current, A 100     Input voltage range, V 90 - 285     Output voltage range, V 220+/- 8%     Stabilization type relay     Accuracy output voltage,% 8     Adjustment stepwise     Distortion sine wave no     Operating range t ° C -30 - +50     Cooling forced     Network Connection Method terminal block     Housing metal     Protection against short circuit +     Lightning protection +     Overall dimensions, cm 48x32x21     Weight, kg. 31   220 Volt voltage stabilizer for summer cottage, country house, car service, farm, production - the need for the realities of existing power grids. There are regions in the world where low voltage is inconceivable and there are regions where the voltage is very high (over 260 volts). The relay type stabilizer 20000 Va of the "Platinum" series has been developed taking into account this situation and works with the stated characteristics in the input voltage range from 100 to 285 Volts. The stabilizers of this series, 11000VA, 12500VA, 16000VA and 20000VA, are distinguished by their reliability, increased service life, and improved characteristics. Designed for those cases when you really need to increase the voltage to 220V in a network with a voltage of 100-190 volts. Platinum series models do not have a bypass, as at low input mains voltage (below 180 volts) it is dangerous to switch on the equipment without stabilization. The "Platinum" series has been developed and put into mass production for countries with problem low voltage, for those who have a standard version of stabilizers cannot solve the problem of increasing the voltage while maintaining power. When installing these stabilizers should take into account the current, which increases in the wiring, you should choose the correct cross-section of conductors, connecting buses, terminals, machines. A distinctive feature of the series of SUNTEK Platinum relay stabilizers is a bipolar automatic machine, which allows to increase the reliability of the stabilizer, to reduce the effect of transients and high currents on the plates of the automatic machine. Relay stabilizers SUNTEK - stabilizers that do not require maintenance during operation, simple and reliable in operation, the lifetime of the installed relays is at least 10 years. Distinctive features: Universal metal case (mounted and floor)New Holtek MicrocontrollerDigital display (displays input, output voltage)Forced cooling - 2 (two) built-in fansWide operating range (90-285 volts)Double-pole automatic on-off switchInstant response time to change in input voltageHigh accuracy of stabilization (in the working range of 5%, in the allowable - up to 8%)Automatic delayAnalysis of the input voltage at any timeAnalysis of the boundaries of the working rangeShort circuit protectionOverload protection (overheating)Undervoltage protectionOvervoltage protectionEfficient smoothing of impulse noise in the networkOperating temperature from minus 30 to plus 50 C3 year warranty

Specifications:   Rated power, VA 16000     Maximum current, A 75     Input voltage range, V 90 - 285     Output voltage range, V 220+/- 8%     Stabilization type relay     Accuracy output voltage,% 8     Adjustment stepwise     Distortion sine wave no     Operating range t ° C -30 - +50     Cooling forced     Network Connection Method terminal block     Housing metal     Protection against short circuit +     Lightning protection +     Overall dimensions, cm 48x32x21     Weight, kg. 26   Voltage stabilizer SUNTEK 16000 VA Platinum is a popular model of the stabilizer, operating already at 100 volts of input voltage. Solves the difficult task - to work at full nominal even at very low voltage. SUNTEK Platinum relay stabilizers fully operate from 140 V input, but there are and there will be countries where there is not even 140 V in the electrical network, or the voltage periodically jumps. For these regions and were developed and launched a series of stabilizers Suntek series "Platinum". To cope with the task of this series of stabilizers allow features, updates and additions that distinguish them from the classic relay stabilizers SUNTEK (Santek). First of all, it is a more powerful coil (since the currents are higher compared to the network with voltage higher than 140V) installed in the stabilizer.Secondly, it is the presence of 5 (five) relays to equalize the output voltage to the allowed level.Thirdly, this forced cooling is implemented in two fans (coolers) that turn on when the winding reaches a temperature of 70 degrees Celsius.Fourthly, the on-off stabilizer is carried out by a bipolar machine,11000VA NN - 25 Amp automat (25x2 = 50A),in 12500VA NN - 32A (32x2 = 64A),16000VA NN - 40A (40x2 = 80A),20000VA NN - 50A (50x2 = 100A). The bipolar automatic machine - additional reliability at transients in the automatic machine and at operation of the stabilizer. Also, the SUNTEK stabilizer of the relay type 16000VA of the Platinum series, like all relay stabilizers, has a metal case (with holes for mounting on the wall and legs for horizontal installation), digital indication of the input and output voltage, on-delay (protection against false positives), short-circuit protection , overload protection, overheating protection, protection of the connected equipment against undervoltage, against overvoltage. Automatic shutdown and power up during a critical change in the supply network - if the input voltage suddenly exceeds 285V, the regulator will disconnect the load and will be in the standby mode of normalization of the network (below 285V), after which it will automatically turn on, and also at a critical voltage drop. The temperature mode of the stabilizer is from minus 30 to plus 50, the degree of protection of the enclosure is IP20. 3 year warranty The SUNTEK 16000 Platinum voltage stabilizer will work even from 90 volts, but it should be understood that the load level must be less than the nominal. Its full-fledged characteristics of the stabilizer begins to perform from 100 volts. At a voltage in the range of 270-285 Volts, the actual output voltage will also be shown on the display. But when reaching 285-288 Volt, the stabilizer will immediately turn off by turning off all devices (the letter “H” on the display), since the output voltage will be very high and dangerous for the equipment.

Specifications:   Rated power, VA 12500     Maximum current, A 63     Input voltage range, V 90 - 285     Output voltage range, V 220+/- 8%     Stabilization type relay     Accuracy output voltage,% 8     Adjustment stepwise     Distortion sine wave no     Operating range t ° C -30 - +50     Cooling forced     Network Connection Method terminal block     Housing metal     Protection against short circuit +     Lightning protection +     Overall dimensions, cm 46x29x19     Weight, kg. 23   The undervoltage voltage stabilizer 12500VA SUNTEK Platinum is the best choice when looking for a reliable, high-quality stabilizer capable of making 220 Volts from 100 Volts. It is possible to install this model for the whole house (the total load should not exceed 12 kW) by connecting household or house appliances and technical equipment (pumping stations, septic tanks, heaters, etc.). Platimun series stabilizers can be used in production, in auto repair shops, farms as a supplier of reliable electricity with a voltage of 220 volts. The stabilizer is made in a metal case and can be placed horizontally on the legs, or vertically on the wall (mount included with the stabilizer). A powerful coil, a relay in the amount of 5 pieces, a data management card for the relays are the three main components that make it possible to obtain the stated characteristics of the SUNTEK Platinum stabilizers of this series. Relay stabilizers do not require maintenance and additional costs, it saves users time and money. From the SUNTEK relay stabilizers, the Platinum series models differ in addition to having a more powerful coil and 5 relays also with auxiliary equipment: - forced cooling is carried out by 2 fans installed on both sides of the coil. - bipolar circuit breaker - allows to divide the increased currents passing through the stabilizer at low input voltage. The SUNTEK 12500 Platimun voltage stabilizer will work even from 90 volts, but it should be understood that the load level must be less than the nominal. Its full-fledged characteristics of the stabilizer begins to perform from 100 volts. At a voltage in the range of 270-285 Volts, the actual output voltage will also be shown on the display. But when reaching 285-288 Volt, the stabilizer will immediately turn off by turning off all devices (the letter “H” on the display), since the output voltage will be very high and dangerous for the equipment.

SUNTEK stabilizer of relay type for a low voltage of 11000 VA. The stabilizer works at an input voltage of even <100 Volts, which makes it an indispensable assistant in a country house or in production. Specifications:   Rated power, VA 11000     Maximum current, A 50     Input voltage range, V 90 - 285     Output voltage range, V 220+/- 8%     Stabilization type relay     Accuracy output voltage,% 8     Adjustment stepwise     Distortion sine wave no     Operating range t ° C -30 - +50     Cooling forced     Network Connection Method terminal block     Housing metal     Protection against short circuit +     Lightning protection +     Overall dimensions, cm 46x29x19     Weight, kg. 21   This stabilizer can easily work with devices connected to it simultaneously, such as a refrigerator, a boiler, a TV, an audio-video equipment. Or simply install it on a powerful washing machine, heating equipment, garage, bath up to 11 kW. Voltage stabilizer SUNTEK Platinum in the range of 100-270 Volts is fully operational. The display shows the output voltage of 220 volts. If as a result of further voltage drop (and it is in the range of 90-100 Volt), the output voltage becomes less than allowed in your country, then the board shows the actual voltage, with an accuracy of 1 volt. The SUNTEK 11000 Platinum voltage stabilizer will work even from 90 volts, but it should be understood that the load level must be below the nominal. The stabilizer starts to perform its full-fledged characteristics from 100 volts. At a voltage in the range of 270-285 Volts, the actual output voltage will also be displayed on the display. But when reaching 285-288 Volt, the stabilizer will immediately turn off, turning off all devices (the letter “H” is displayed), since the output voltage will be very high and dangerous for the equipment. The SUNTEK voltage regulator will be your network status indicator from 90 to 285 Volts. If you are interested, follow the state of the network, if you do not have time - the stabilizer will control everything himself and give the best option for this situation.

Specifications:   Rated power, VA 20000     Maximum current, A 100     Input voltage range, V 120 - 285     Output voltage range, V 220+/- 8%     Stabilization type relay     Accuracy output voltage,% 8     Adjustment stepwise     Distortion sine wave no     Operating range t ° C -30 - +50     Cooling forced     Network Connection Method terminal block     Housing metal     Protection against short circuit +     Lightning protection +     Overall dimensions, cm 35х33х54     Weight, kg. 40   One of the most powerful in the line of SUNTEK relay stabilizers, 100 Amper automat with bypass, lightning protection, full-power pulling coil from 140 Volts at the input, a microprocessor control circuit, a powerful terminal block, a forced cooling fan - a stabilizer filling that allows you to drop everything anxiety due to poor tension in the house. It is in high demand among those living in the country (house, cottage), owners of small production sites, workshops, as well as owners of “demanding” equipment - power tools (compressors, pumping stations, HVAC equipment, etc.). Installation in a three-phase network for each phase will provide 60 kVA of power, and thereby eliminate the possibility of complete loss of the network. When connecting a three-phase load (machines, motors, etc.), it is enough to additionally install a phase control relay. The ability to connect a large number of pieces of equipment, electrical wiring throughout the house - makes this model indispensable for suburban life. The SUNTEK 20000VA voltage relay of the relay type possesses all the qualities of the SUNTEK relay line - reliability, simplicity, quality for reasonable money. Metal caseNew Holtek Microcontroller Holds full power from 140 volts Digital display Wide operating range (120-285 volts) Instant response time to change in input voltage High accuracy of stabilization 

Specifications:   Rated power, VA 1500     Maximum current, A 9     Input voltage range, V 120 - 285     Output voltage range, V 220+/- 8%     Stabilization type relay     Accuracy output voltage,% 8     Adjustment stepwise     Distortion sine wave no     Operating range t ° C -30 - +50     Cooling passive     Network Connection Method plug/socket     Housing metal     Protection against short circuit +     Lightning protection +     Overall dimensions, cm 28x18x14     Weight, kg. 6   This is a serious model! 1500 watts can fully provide your kitchen with a stable voltage - a microwave, a refrigerator, a tester - everything will work. The honest power of the voltage regulator is first and foremost your comfort. No need to think and think ... You bought this stabilizer so that your equipment worked for many years, it will be so. The voltage regulator is always on guard, 24/7, stable 1500 W. What can we attract? First is the quality. People are tired of poor quality, of not matching parameters, etc. We went the other way. We do not sell at a low price, we sell at the right price. Install such a voltage regulator in your home and you yourself will understand everything.

Specifications:   Rated power, VA 12500     Maximum current, A 63     Input voltage range, V 120 - 285     Output voltage range, V 220+/- 8%     Stabilization type relay     Accuracy output voltage,% 8     Adjustment stepwise     Distortion sine wave no     Operating range t ° C -30 - +50     Cooling forced     Network Connection Method terminal block     Housing metal     Protection against short circuit +     Lightning protection +     Overall dimensions, cm 50x27x17     Weight, kg. 21   This is your home! Maybe the neighbors and there will be power surges, you never! One of the most powerful in the line of SUNTEK relay stabilizers, 63 Amper automat with bypass, lightning protection, full-power pulling coil from 140 Volts at the input, a microprocessor control circuit, a powerful terminal block, a forced cooling fan - a stabilizer filling that allows you to drop everything anxiety due to poor tension in the house. It is in high demand among those living in the country (house, cottage), owners of small production sites, workshops, as well as owners of “demanding” equipment - power tools (compressors, pumping stations, HVAC equipment, etc.). Installation in a three-phase network for each phase will provide 37.5 kVA of power, and thereby eliminate the possibility of complete loss of the network. When connecting a three-phase load (machines, motors, etc.), it is enough to additionally install a phase control relay. The ability to connect a large number of pieces of equipment, electrical wiring throughout the house - makes this model indispensable for suburban life. The SUNTEK 12500VA voltage relay of the relay type possesses all the qualities of the SUNTEK relay line - reliability, simplicity, quality for reasonable money.

Specifications:   Rated power, VA 11000     Maximum current, A 50     Input voltage range, V 120 - 285     Output voltage range, V 220+/- 8%     Stabilization type relay     Accuracy output voltage,% 8     Adjustment stepwise     Distortion sine wave no     Operating range t ° C -30 - +50     Cooling forced     Network Connection Method terminal block     Housing metal     Protection against short circuit +     Lightning protection +     Overall dimensions, cm 43x28x18     Weight, kg. 19   And phot and flagship! Many, many people bought this model. Over 6 Circulations of their release exceeded 20 000 units. The usual stabilizer, like the market a lot, But you can not pay a lot! This stabilizer is bought for a very long time. Power relays react in time to changes in input voltage. High speed response to changes in input voltage. Power surges are instantly “processed” by the microcircuit and relays (10 ms). Full nominal already when the input voltage reaches 140 volts. Automatic commissioning, continuous network testing. It is frost-resistant, temperature condition of work from -300 C to +500 C, compulsory cooling at high temperatures of a winding. Universal case - can be put on the legs, or hanged on the wall with a fastener (supplied with each stabilizer). Short circuit protection Overload protection (overheating) Undervoltage protection Overvoltage protection Protection against impulse (lightning) dischargesEffective smoothing of impulse noise in the network

Specifications:   Rated power, VA 8500     Maximum current, A 40     Input voltage range, V 120 - 285     Output voltage range, V 220+/- 8%     Stabilization type relay     Accuracy output voltage,% 8     Adjustment stepwise     Distortion sine wave no     Operating range t ° C -30 - +50     Cooling forced     Network Connection Method terminal block     Housing metal     Protection against short circuit +     Lightning protection +     Overall dimensions, cm 43x28x18     Weight, kg. 16   Model with forced cooling! Do you have a country house and low voltage? You can even use welding through such a voltage stabilizer! This stabilizer is installed in many plants and factories, sets of three pieces allow to ensure stable voltages all three phases! High speed response to changes in input voltage. Power surges are instantly “processed” by the microcircuit and relays (10 ms). Full nominal already when the input voltage reaches 140 volts. Automatic commissioning, continuous network testing. It is frost-resistant, temperature condition of work from -300 C to +500 C, compulsory cooling at high temperatures of a winding. Universal case - can be put on the legs, or hanged on the wall with a fastener (supplied with each stabilizer). Short circuit protection Overload protection (overheating) Undervoltage protection Overvoltage protection Protection against impulse (lightning) dischargesEffective smoothing of impulse noise in the network

Specifications:   Rated power, VA 5000     Maximum current, A 25     Input voltage range, V 120 - 285     Output voltage range, V 220+/- 8%     Stabilization type relay     Accuracy output voltage,% 8     Adjustment stepwise     Distortion sine wave no     Operating range t ° C -30 - +50     Cooling forced     Network Connection Method terminal block     Housing metal     Protection against short circuit +     Lightning protection +     Overall dimensions, cm 38x25x16     Weight, kg. 12   This is called an object model! The stabilizer can do a lot, install such a stabilizer on complex equipment and you will feel safe in the house! High speed response to changes in input voltage. Power surges are instantly “processed” by the microcircuit and relays (10 ms). Full nominal already when the input voltage reaches 140 volts. Automatic commissioning, continuous network testing. It is frost-resistant, temperature condition of work from -300 C to +500 C, compulsory cooling at high temperatures of a winding. Universal case - can be put on the legs, or hanged on the wall with a fastener (supplied with each stabilizer). Short circuit protection Overload protection (overheating) Undervoltage protection Overvoltage protection Protection against impulse (lightning) dischargesEffective smoothing of impulse noise in the network  

Specifications:   Rated power, VA 2000     Maximum current, A 10     Input voltage range, V 120 - 285     Output voltage range, V 220+/- 8%     Stabilization type relay     Accuracy output voltage,% 8     Adjustment stepwise     Distortion sine wave no     Operating range t ° C -30 - +50     Cooling passive     Network Connection Method plug/socket     Housing metal     Protection against short circuit +     Lightning protection +     Overall dimensions, cm 32х15х8     Weight, kg. 5   This is the top model of voltage regulators with a socket and plug. 2000 W, 8A, these parameters solve any problems of your home. Want to feel comfortable is for you! 2KWatt energy in your hands. This is not 150 volts as a neighbor who does not boil a kettle for 10 minutes, as you are now, but 17 minutes, this is the possibility of working all the equipment at one time! What can we attract? First is the quality. People are tired of poor quality, of not matching parameters, etc. We went the other way. We do not sell at a low price, we sell at the right price. Install such a voltage regulator in your home and you yourself will understand everything. And now the facts:1. Operating range 120-285 volts2. In the range of 140-270 Volt, the stabilizer fully corresponds to the nominal, it can be seen on the video!3. The presence of lightning protection allows it to be used in difficult weather conditions in India, the UAE, and African countries.4. Installed relays in the stabilizer provide up to 100,000 switches each. If each relay switches 20 times a day (a total of 80 times), even with such conditions, the resource will be enough for almost 14 years of work!Silver on the contacts eliminates their sticking.

Specifications:   Rated power, VA 1500     Maximum current, A 7     Input voltage range, V 120 - 285     Output voltage range, V 220+/- 8%     Stabilization type relay     Accuracy output voltage,% 8     Adjustment stepwise     Distortion sine wave no     Operating range t ° C -30 - +50     Cooling passive     Network Connection Method plug/socket     Housing metal     Protection against short circuit +     Lightning protection +     Overall dimensions, cm 32х15х8     Weight, kg. 4   This is a serious model! 1500 watts can fully provide your kitchen with a stable voltage - a microwave, a refrigerator, a tester - everything will work. The honest power of the voltage regulator is first and foremost your comfort. No need to think and think ... You bought this stabilizer so that your equipment worked for many years, it will be so. The voltage regulator is always on guard, 24/7, stable 1500 W. What can we attract? First is the quality. People are tired of poor quality, of not matching parameters, etc. We went the other way. We do not sell at a low price, we sell at the right price. Install such a voltage regulator in your home and you yourself will understand everything. And now the facts:1. Operating range 120-285 volts2. In the range of 140-270 Volt, the stabilizer fully corresponds to the nominal, it can be seen on the video!3. The presence of lightning protection allows it to be used in difficult weather conditions in India, the UAE, and African countries.4. Installed relays in the stabilizer provide up to 100,000 switches each. If each relay switches 20 times a day (a total of 80 times), even with such conditions, the resource will be enough for almost 14 years of work!Silver on the contacts eliminates their sticking.

Specifications:   Rated power, VA 1000     Maximum current, A 4     Input voltage range, V 120 - 285     Output voltage range, V 220+/- 8%     Stabilization type relay     Accuracy output voltage,% 8     Adjustment stepwise     Distortion sine wave no     Operating range t ° C -30 - +50     Cooling passive     Network Connection Method plug/socket     Housing metal     Protection against short circuit +     Lightning protection +     Overall dimensions, cm 32х15х8     Weight, kg.                                     4 1000 watts .. is it a lot or a little? 1KVA of stable energy in your hands. Let the voltage change, decrease and increase, all is well. It's like a wave on the surface of the ocean, but in the depths there is always silence. Voltage stabilizers of our production will provide your equipment with calm energy. 1000 watts is a good potential. This is a refrigerator, TV, laptop ... and all together! Such a device can provide electricity to your main consumers! 4 sockets - 4 devices. All 4 sockets stabilize the voltage! Do not exceed the total power and your equipment will last for many years!   What can we attract? First is the quality. People are tired of poor quality, of not matching parameters, etc. We went the other way. We do not sell at a low price, we sell at the right price. Install such a voltage regulator in your home and you yourself will understand everything.   And now the facts: 1. Operating range 120-285 volts 2. In the range of 140-270 Volt, the stabilizer fully corresponds to the nominal, it can be seen on the video! 3. The presence of lightning protection allows it to be used in difficult weather conditions in India, the UAE, and African countries. 4. Installed relays in the stabilizer provide up to 100,000 switches each. If each relay switches 20 times a day (a total of 80 times), even with such conditions, the resource will be enough for almost 14 years of work! Silver on the contacts eliminates their sticking.  

Model SUNTEK to provide 220 V gas boiler, computer and audio-video equipment. A wide operating range of 120-285 Volts, instantaneous speed of operation, switching the relay without breaking the circuit.This voltage stabilizer is popular among users in many countries. Thousands of gas boilers are protected by SUNTEK PR 500 VA voltage regulators. Simple and reliable, fireproof and convenient. We received many different epithets for this model. A 3 year warranty confirms our words and gives the user confidence in the reliability of this equipment. What can we attract? First is the quality. People are tired of poor quality, of not matching parameters, etc. We went the other way. We do not sell at a low price, we sell at the right price. Install such a voltage regulator in your home and you yourself will understand everything. And now the facts:1. Operating range 120-285 volts2. In the range of 140-270 Volt, the stabilizer fully corresponds to the nominal, it can be seen on the video!3. The presence of lightning protection allows it to be used in difficult weather conditions in India, the UAE, and African countries.4. Installed relays in the stabilizer provide up to 100,000 switches each. If each relay switches 20 times a day (a total of 80 times), even with such conditions, the resource will be enough for almost 14 years of work!Silver on the contacts eliminates their sticking.

Model for connection both individually on the device, and for several pieces of equipment. It is widely applicable in case of a strong voltage drop, for powering the gas boiler, or appliances with a capacity of up to 1 kW. 1. Operating range 120-285 volts 2. In the range of 140-270 Volt, the stabilizer fully corresponds to the nominal, it can be seen on the video! 3. The presence of lightning protection allows it to be used in difficult weather conditions in India, the UAE, and African countries. 4. Installed relays in the stabilizer provide up to 100,000 switches each. If each relay switches 20 times a day (a total of 80 times), even with such conditions, the resource will be enough for almost 14 years of work! Silver on the contacts eliminates their sticking. The electronic unit of the voltage regulator SUNTEK is a fairly powerful microcontroller, in which the input and output voltage is analyzed and signals are generated to control the stabilizer keys. When forming the control voltage, the microcontroller takes into account the response time of keys and power relays. This allows switching without breaks. As a result, the voltage waveform at the output of the relay stabilizer repeats the shape at the input. SUNTEK voltage regulator will be your network status indicator. If you are interested, follow the state of the network, if you do not have time - the stabilizer will control everything by itself and will give the best option for this situation.   3 year warranty

Model for connection both individually on the device, and for several pieces of equipment. It is widely applicable in case of a strong voltage drop, for powering the gas boiler, or appliances with a capacity of up to 1 kW. 1. Operating range 120-285 volts 2. In the range of 140-270 Volt, the stabilizer fully corresponds to the nominal, it can be seen on the video! 3. The presence of lightning protection allows it to be used in difficult weather conditions in India, the UAE, and African countries. 4. Installed relays in the stabilizer provide up to 100,000 switches each. If each relay switches 20 times a day (a total of 80 times), even with such conditions, the resource will be enough for almost 14 years of work! Silver on the contacts eliminates their sticking. The electronic unit of the voltage regulator SUNTEK is a fairly powerful microcontroller, in which the input and output voltage is analyzed and signals are generated to control the stabilizer keys. When forming the control voltage, the microcontroller takes into account the response time of keys and power relays. This allows switching without breaks. As a result, the voltage waveform at the output of the relay stabilizer repeats the shape at the input. SUNTEK voltage regulator will be your network status indicator. If you are interested, follow the state of the network, if you do not have time - the stabilizer will control everything by itself and will give the best option for this situation.   3 year warranty

Model for connection both individually on the device, and for several pieces of equipment. It is widely applicable in case of a strong voltage drop, for powering the gas boiler, or appliances with a capacity of up to 1 kW. 1. Operating range 120-285 volts 2. In the range of 140-270 Volt, the stabilizer fully corresponds to the nominal, it can be seen on the video! 3. The presence of lightning protection allows it to be used in difficult weather conditions in India, the UAE, and African countries. 4. Installed relays in the stabilizer provide up to 100,000 switches each. If each relay switches 20 times a day (a total of 80 times), even with such conditions, the resource will be enough for almost 14 years of work! Silver on the contacts eliminates their sticking. The electronic unit of the voltage regulator SUNTEK is a fairly powerful microcontroller, in which the input and output voltage is analyzed and signals are generated to control the stabilizer keys. When forming the control voltage, the microcontroller takes into account the response time of keys and power relays. This allows switching without breaks. As a result, the voltage waveform at the output of the relay stabilizer repeats the shape at the input. SUNTEK voltage regulator will be your network status indicator. If you are interested, follow the state of the network, if you do not have time - the stabilizer will control everything by itself and will give the best option for this situation.   3 year warranty

Model 3000 VA is a popular model that can already perform two functions - either to connect powerful equipment or, at very low voltage, to provide small devices with good voltage. For example, if you have 110-120 volts of input voltage, then according to the graph below, the allowed input power will be 80% or 2400 watts. Agree, with such a low voltage it will be a very good solution! High speed response to changes in input voltage. Power surges are instantly “processed” by the microcircuit and relays (10 ms). Full nominal already when the input voltage reaches 140 volts. Automatic commissioning, continuous network testing. It is frost-resistant, temperature condition of work from -300 C to +500 C, compulsory cooling at high temperatures of a winding. Universal case - can be put on the legs, or hanged on the wall with a fastener (supplied with each stabilizer). Short circuit protection Overload protection (overheating) Undervoltage protection Overvoltage protection Protection against impulse (lightning) dischargesEffective smoothing of impulse noise in the network

The most popular model for providing 220 V  computer and audio-video equipment. A wide operating range of 120-285 Volts, instantaneous speed of operation. This voltage stabilizer is popular among users in many countries. Thousands of gas boilers are protected by SUNTEK 550 VA voltage regulators. Simple and reliable, fireproof and convenient. We received many different epithets for this model. A 3 year warranty confirms our words and gives the user confidence in the reliability of this equipment.And now the facts: 1. Operating range 120-285 volts2. In the range of 140-270 Volt, the stabilizer fully corresponds to the nominal, it can be seen on the video!3. The presence of lightning protection allows it to be used in difficult weather conditions in India, the UAE, and African countries.4. Installed relays in the stabilizer provide up to 100,000 switches each. If each relay switches 20 times a day (a total of 80 times), even with such conditions, the resource will be enough for almost 14 years of work!Silver on the contacts eliminates their sticking.

FACTORY OF OILFIELD THERMOPLASTIC COMPOSITE PIPE TCP/RTP "TURNKEY" PIPE We will help you build a plant, organize the production of composite pipes from the development of technical solutions and business plan, engineering, equipment supply to commissioning. Our main services: • Consulting on the establishment of the production of composite pipes; • Development of technical solutions for the construction of a TCP pipe plant; • Technology and engineering; • Preparation of a business plan for the project; • Supply of technological equipment, installation supervision and commissioning • Technological and technical support of the project • Legalization of production in Russia • Warranty and post-warranty service We offer flexible solutions

Italian coffee machines.

Introduction and application:   The spout pouch filling packing machine consists of pouch supply, filling, cap supply, cap sorting, and capping parts, fully automatic! Which is applied for filling different kinds of liquid and viscous liquid. Such as juice yogurt, water, jelly, soy milk, cooking oil, liquid soap, tomato sauce, jam, chocolate spread, etc. Feature: 1. Model FP-ZLD series is a spouted pouch-filling capping machine. 2. It is widely applied in different products such as juice yogurt, water, jelly, soy milk, cooking oil, liquid soap, etc. Also used for semi-fluid, for example, tomato sauce, jam, chocolate spread, etc. 3. Fully automatic pouch supply, filling, cap supply, cap sorting, and capping. 4. It with 4 filling nozzles max packing speed of 2000-6000 pouches/hour. 5. International spare parts brand that ensures stable performance. 6. Easy to operate by touch-sensitive screen, PLC, and electric control system 7. High quality and performance, the frame is made of 150mm thickness 304# stainless steel. 8. Special designed non-drip filling nozzle to prevent dripping. 9. No bag – no filling- no sealing. Specification:   MODEL FP-ZLD  Equipment Structure Filling capping combi Equipment Material 304 stainless steel Measurement Way Piston measurement Operation Interface Touch screen Applicable product Liquid and Viscous products Packaging bag material Complex film Packaging bag size Width: 180mm-300mm Working process Step 1: Supplying premade bags Step 2: Filling Step 3. cap loading Step 4: cap screwing Product weight 10-500ml customizable Measure hopper capacity ≥20KG Packaging speed 2000-6000 pcs/hr.  Equipment weight 650KG Equipment Size 2420×1520×1560mm (L*W*H) Working Power 1.5KW Air Consumption 0.8 m³/min

General description This liquid filling machine is consist of bottle rinsing, filling, and capping functions for all types of hot-filling products like concentrated juice, pulp juice, fresh juice, etc. Rinser The bottle enters the rinsing part of the three-in-one machine through the air conveyor. The gripper installed on the rotary disk catches the bottle and turns it over 180 degrees and makes the bottleneck face ground. In the special rinsing area, the nozzle on the gripper sprays juice to rinse the bottle inwall. After rinsing and draining, the bottle turns over 180 degrees along the guide rail and makes the bottleneck faces the sky. Then rinsed bottle is transferred to the filling part by poking the bottle starwheel. The bottle that enters into the filler is held by a neck-holding plate. The filling valve acted by the cam can realize up and down. It adopts a pressure-filling way. The filling valve opens and begins filling when it moves down and touches the bottleneck, the filling valve moves up and leaves the bottleneck when it finishes filling, and the full bottle is transferred to the capping part through the hold neck transition poking wheel. The stop-screwing knife holds the bottleneck and keeps the bottle upright not rotating. The screw capping head keeps in revolution and autorotation. It can finish a whole capping course including catching, pressing, screwing, and discharging through the action of the cam. The full bottle is transferred to the bottle outlet conveyor to the next process through the starwheel. The whole machine is enclosed with windows, the height of the enclosed window is higher than the peak of the 3-in-1 machine, in the bottom of the enclosed window has a return air outlet. Filler This part is mainly used for filling juice after finishing the bottle rinse. The filling machine is introduced by German technology and uses the normal pressure fill principle to design and produce. It adopts a normal pressure mechanism valve, making the filling with high speed and high precision of liquid level. Double leading bars elevator structure to make the bottle up and stable. The main drive transmission adopts a gear transmission that is an opening combination drive, with high efficiency, low noise, long life, easy maintenance, full lubrication, and use of transducer control the main drive motor speed, this machine is non-degree conversion frequency speed control. Bottle guiding system, the structure is simple, it can quickly and easily change according to different bottle volumes, this whole machine is transported by the clipping bottleneck method. PLC is controlled by itself, fault display online, e.g. bottle block or non-cap, etc. In the filling tank, the product material control itself, and the liquid level height adopts a liquid level sensor to test and make sure a stable liquid level and reliable filling. This machine's main spare parts and electrical components are import products. Capper The capping part finishes the work to cap the bottles after filling by cap elevator, and the cap is conveyed to the following procedure by the conveyor chain. The capping machine rotates through a reduction box drive rotational wheel, to make the cap leave the hopper with the function of centrifugal force. There is a separation device for the right cap and the wrong cap at the exit, when the wrong cap passes, the cap automatically falls into and returns to the pipeline, and blows the wrong cap automatically to the hopper through wind power. Only the right cap could enter into skids smoothly, the volume of the cap inside of the hopper will be automatically inspected by the electric switch to control the cap conveyor, and that ensures the best effect of the cap down. When the right cap enters into the slideway, it could smoothly enter into the cap feed plate, to prevent accidents, there is an anti-wrong cap drive plate device to match with the slideway, to ensure that the access to the cap feed plate is correct. The slideway is also equipped with a pair of photoelectric switches when testing no cap, then an immediate halt to the host. In order to effectively remove non-anti-theft ring bad caps and clean up additional caps in the hopper, there is an active exit in front of the hopper exit that can meet this function. Technical parameter: Model: FP-CGGF Washing head: 8,12,14,16,18,24,32... Filling head: 8,12,14,16,18,24,32... Capping head: 4,6,8,10,12... Production capacity: 3000-24000b/hr. Air source pressure: 0.6-0.8MPa Air consumption: 3M3/H Rinsing juice pressure: 0.15-0.2 MPa Bottle height: 150-340MM Bottle diameter: Φ50-Φ120MM Rinsing water consumption: To be confirmed Filling way: Hot filling Power: 3ph, 380V/50Hz,4.5KW Overall size: 4500*2000*2400 (L*W*H) mm Weight: 2500Kg

Polypropylene thread PP-8 is used for installation on tea-packing machines with ultrasonic welding. After going through the production cycle on a bagging machine, the PP-8 thread connects the label and the tea bag itself. Structure - 100% polypropylene Twisting of a thread - 8 threads Stretching - 20-40%

Topographic (geodesic) tablet - a sheet of paper glued to the base and intended for graphic constructions in the production of topographic surveys. Tablets differ in their size and base: lavsan film, or more rigid aluminum or plastic. Topographic geodetic tablets can be supplied with or without markings. Topographic tablet (540 x 560 mm) Topographic tablet (570x840 mm) Topographic tablet (600x600) mm.

Polypropylene thread PP6 for tea pyramids (China) is used for Fuso, WOOSHIN, CORESH, IMA, CT 10 equipment, produced by twisting thinner PP threads into one. Thread spools are used for installation on tea packing machines with ultrasonic welding. After going through the production cycle on a tea-packing machine, the PP-6 thread connects the label and the tea bag itself. Composition - 100% polypropylene Twisting thread - 6 threads Stretching - 20-35% Properties: environmentally safe and compatible with food; It has high strength and elasticity Treated with steam Low absorbency of the tea bag thread The maximum possible length of the coil stroke It has uniform twisting without knots Supplied: in bobbins - 0.8 kg Winding: 4000m Packed in a corrugated box - 18 coils For information on cost, check with managers

◆CNC turning and milling compound machine tool is a main type of compound processing machine tool. In addition to the functions of CNC lathe, it can also complete plane milling, drilling, tapping, straight groove, spiral groove and tooth milling, etc., with turning and milling As well as boring and other compound functions, this product has excellent material selection and strong structural rigidity; it adopts one-piece castings, the bed support plate has a large span, and the tool holder is inclined, which has good chip removal ability, convenient operation, high precision and stability. Strong, small footprint and other advantages; various brands of operating systems can be selected according to customer needs. ◆Adopt integral sleeve spindle, imported precision grade spindle bearing, and spindle servo motor drive to achieve high precision, high rigidity and speed stability. The heat sink type spindle box is designed and equipped with symmetrical ribs, which can effectively reduce the temperature rise of the spindle, increase the stability of the spindle and the life of the bearing. ◆High rigidity, the bed is inclined at 30° or 45°, made of high-quality cast iron resin sand molding, compact rib plate structure, good rigidity and strong shock resistance. The large carriage and tool rest are tilted, which makes the operation and chip removal of the machine tool very convenient, and the floor space is small, which is very pleasant. ◆The two-axis rotation is directly connected by the servo motor and the precision ball screw through an elastic coupling. The force is good and the positioning accuracy is high. It is equipped with a computer automatic lubrication system for forced lubrication of the linear guide rail and the ball screw. ◆The X-axis and Z-axis adopt high-rigidity linear slide rails. The calculated span between the rails is better, low resistance, high rigidity, and high precision. The displacement speed can reach 28M/min, which improves work efficiency and shortens the processing time. time. ◆The hydraulic station adopts Taiwan variable pump, hydraulic motor, solenoid valve and is equipped with air cooling device, which has low noise and low oil temperature. ◆Fully enclosed protection, good water resistance, integral casting of the base. ◆Adopt Taiwan 12-station servo power rotary turret, with high positioning accuracy, low failure rate, fast tool change, and nearby tool change. ◆Adopt servo spindle, add two (three) axis radial or axial servo power heads, can realize 360-degree indexing and positioning of the spindle, have side and end surface drilling, tapping, milling functions, and can complete more complex parts in one clamping processing. Machine data\model unit FDL-46DWY FDL-52DWY FDL-75DWY FDL-75100DWY Processing range **Rotation diameter on bed mm 460 560 560 580/630 **Processing diameter mm 400 450 450 560/630 **Rotation diameter on carriage mm Φ220 Φ300 Φ300 Φ360/Φ400 **Machining length mm 280 420 400 1000 Spindle parameters Spindle end form A2-5 A2-6 A2-8 A2-8 Chuck type 6-inch chuck/collet 8-inch chuck/tube 10-inch chuck/collet 10-inch chuck/collet spindle through hole diameter φ/mm 56 66 87 87 **Bar material passing diameter φ/mm 46 52 75 75 Spindle speed range r/min 5000 4500 2600 2600 Main Motor power Kw 7.5 11/15 11/15 15/18.5 X/Y/Z axis parameter X/Y/Z axis stroke m/min 210/100/400 225/100/610 225/100/610 350/100/1000 X/Y/Z axis fast moving speed m/min 30/20/30 30/20/30 30/20/30 18/18/18 X/Y/Z axis repeatability mm ±0.0025 ±0.0025 ±0.0025 ±0.0025 X/Y/Z axis positioning accuracy mm ±0.003 ±0.003 ±0.003 ±0.003 X axis servo motor power kw 2.4 3.9 3.9 5.9 Y axis servo motor power kw 2.4 2.4 2.4 2.4 Z axis servo motor power kw 2.4 3.9 3.9 5.9 Turret knife Stand type T 12 pieces 12 pieces 12 pieces 12 pieces Square cutter/boring cutter size mm 25*25/φ32 25*25/φ32 25*25/φ32 25*25/φ32 Turret servo motor power Kw 1.0 1.0 1.0 1.0 Power Servo Motor Power Kw 3.1 3.1 3.1 3.1 Specifications of Power Head - BMT/ER20/25 BMT/ER25/32 BMT/ER25/32 BMT/ER25/32 Tailstock and Tailstock Sleeve Diameter mm φ80 φ80 φ80 φ100 Tailstock Sleeve Stroke mm 120 150 150 130 Tailstock maximum stroke mm 300 450 450 1250 Tailstock sleeve form hydraulic hydraulic hydraulic hydraulic tailstock sleeve taper MT Moshi No. 4 Moshi No. 5 Moshi No. 5 Moshi No. 5 other Other hydraulic motor power kw 1.5 1.5 1.5 1.5 Water pump motor power kw 0.75 0.75 0.75 0.75 Machine weight KG 4200 5050 5050 6400 Bed form and inclination Integral/30° Integral/30° Integral/30° Integral/45 ° Machine tool size (length*width*height) mm 2500*1800*1850 2850*2000*2250 2850*2000*2250 4400*2250*2450 , the actual appearance and technical parameters are subject to the order

Nickel-plated gas valve These models are made of brass and are full bore ball valves. They are widely used in pipelines of natural gas, low and medium pressure as well as liquefied hydrocarbon gases, in compressed air systems and technological circuits for transporting non-aggressive liquids. Ball valves 1/2", 3/4", 1", handle (butterfly or lever) /Internal Thread).

Mounting kit MK25 is a curved pipe with a prepared installation site for the Prince gas meter and nuts. Designed to replace gas meters with center distance 110 mm and connecting nuts 1 and 1/4 inches. This kit can be used to replace the VK G4 1 1/4" L110 meter. WITHOUT WELDING, install the Prince ultrasonic gas meter of the appropriate size. *Suitable for replacing Elster VK-G4, VK-G4T gas meters. place of installation of the gas meter Prince 1 pc - adapter-adapter (steel) with internal and external thread 1 pc - gasket (paronite) 1 pc - rubber gasket (MBS) 2 pcs.

Universal water meter by METER LLC 1/2" SVU15-110 mm with gaskets and a set of mounting parts. This universal apartment (household) water meter is a single-jet, dry-running and with high accuracy measures the flow of cold and hot water passing through the water supply system. Installation of this water meter at home allows you to significantly reduce the cost of paying utility bills.The company "METER" is one of the leaders in the production of apartment water meters in Russia and offers reliable and high-quality solutions.Cold and hot water meters are designed to measure the volume of drinking cold and hot water by individual by consumers according to SanPiN 2.1.4.1074-01.In terms of resistance to ambient temperature and humidity, the meters correspond to version B4 in accordance with GOST 12997. In terms of metrological classes, the meters correspond to class "B" for horizontal installation or class "A" for vertical installation in accordance with GOST R 50193.1 .Diameter of conditional pro travel, mm: 15 Nominal pressure, MPa (bar): 1.6 (16) Water temperature, : 5...90 degrees Nominal flow rate, m3/hour: 1.5 Maximum flow rate, m3/hour: 3.0 Overall dimensions, mm, no more : - length: 110 - width: 63 - height: 70 Equipment - Vane meter for cold and hot water SVU-15-110mm - 1 pc. - Passport - 1 pc. - Operation manual - 1 pc. - Mounting kit Fitting - 2 pcs. Nut - 2 pcs. Gasket - 2 pcs.