Industrial Equipments and Machines in bulk on Qoovee

The wheel type fertilizer compost turner is a patent product of our company. It is suitable for large span fermenting & pile-turning of high depth of livestock manure, sludge waste, filter mud, dregs of slag cake, straw sawdust and other organic waste. It is widely used in fermentation & decomposing and dehydrating of organic fertilizer plant, compound fertilizer plant, sludge & waste plant, garden spot and agaricus bisporus plant. Performance characteristics High composting depth: the composting depth can achieve 1.5 meters to 3 meters. Large composting span: the largest composing span can achieve 30 meters width. Lower energy consumption: it uses unique efficient energy-saving transmission mechanism. Under the same quantity of work, the energy consumption is lowerd by 70% compared with traditional compost machine. No dead corners: it uses wheel disk to compost symmetrically, under the displacement of speed governing mobile car, there is no dead corners. High degree of automation:  it is equipped with full automation electrical apparatus control system. So there is no need human operation when it is working. Working principle Using this compost turner can fully perform its mixing function. Adding some adjuvant is necessary to meet the raw material’s requirement of water content & ph value, this machine can help stir and mix them thoroughly. It can also improve the permeablity of the materials, and make the materials fluffy and elastic. At the same time, it absorbs large quantity of air and raises the temperature of fertilizer heap. If the temperature is over high, it can lower the temperature by reabsorbing fresh air, thus forming alternate state of medium-high temperature, which is beneficial to growth and reproduction of microbial flora.

This compost turner machine eliminates the hydraulic steering wheel type stacker. It is a new product owned exclusively by our company in the market. It fills the market gap that the large wheeled compost turner machines can not turn around in situ. No steering wheel required, the driver simply control two bars, then the machine can turn left or right, brake and 180 degrees turn around. Hydraulic balance of steering wheel. The height of the compost turner shaft can be automatically raised and lowered. The fertilizer pile can be forcibly turned or turned at high speed according to the moisture degree of the material. This product adopts soft start turning clutch (domestic similar products are used for iron to iron hard clutch, which will cause serious damage to chain, bearings and shaft). Equipped with front hydraulic push plate, no manual taking time to heap raw materials, drum hydraulic lifting, which greatly save the space, time, diesel, manpower and shorten the fermentation period.

Introduction of BB fertilizer production line. It is a kind of compound granule mixer for several separate fertilizers or compound fertilizers according to a certain proportion. It is characterized by granule uniformity, less water, moderate granule intensity, no agglomeration warehouse, easy to use and low cost. Line for the production of fertilizers of periodic action BB. Introduction. This BB type batch fertilizer production line is used for the efficient production of mixed fertilizers. It is designed according to different soil components in different areas and the specific requirements of compound fertilizer plants and chemical fertilizer manufacturers. Production Process of BB Series Fertilizer Production Line PLC Computer Control System –> Automatic Proportional Dosing of Raw Materials –> Lifting by Inclined Scraper –> Mixing by Roller –> Mixed Materials are Placed in Scale Storage Bins –> Quantity Packing (10-50kg)/Bag) - > Transportation and sewing -> Warehouse for granulation of finished products. Why choose our BB fertilizer production line? 1. Adopt pit dosing and accumulative weighing type, convenient for transportation and transportation of raw materials, easy to operate, saving labor. 2. Uses German Siemens PLC centralized control system, the whole production process is fully automated. 3. Large capacity, 10-30 tons per hour, more suitable for large capacity production lines. 4. Can be customized according to different requirements of customers. Bulk Material Mixing/BB Fertilizer. Scope of application of batch production line. This batch mixing packaging production line is mainly for the production of BB fertilizer, compound fertilizer, compound fertilizer by soil testing, drip irrigation fertilizer, chemical products, feed and other industries.

The process flow of the compound fertilizer production line can be divided into: raw material ingredients, raw material mixing, raw material granulation, particle drying, granular cooling, particle grading, finished packaging film and final product packaging. Characteristics of Performance The compound fertilizer production line has less investment, quick results and good economic benefits. The whole equipment process is compact, scientific and advanced. Energy saving and consumption reducing, no waste removal, stable operation, reliable running, convenient maintenance. The adaptability of raw materials is wide, and the machine is suitable for the granulation of compound fertilizer, medicine, chemical industry, feed, etc., and the granulation rate is high. This machine can produce various compound fertilizer with different concentration and different types. In particular, the granule for tombarthite and ammonium carbide compound fertilizer fills the domestic void and lead the country. Working Principle Process of compound fertilizer production line Raw material ingredients: Urea, ammonium nitrate, ammonium chloride, ammonium sulphate, ammonium phosphate (monoammonium phosphate, diammonium phosphate, and coarse whiting, ca), potassium chloride, potassium sulfate and other raw materials are matched in  proportion (according to the market demand and the around soil of test results). Raw materials mixing: The mixture of the ingredients should be mixed to improve the uniform fertilizer efficiency of the granules. Granulation of raw material: The raw material after mixing equably will be sent to granulator (drum granulator, and extruding granulator both can be used). Granulation drying: put the granulation into the dryer, and the moisture in the granules will be dried, so that the granulation strength is increased and is easier to store. Granulation cooling: After drying, the granulation’s temperature is too high and the granulation is easy to lump. While after cooling, it is easy to bagging to save and transport. Particle classification: the cooling particles that have been cooled will be graded: the unqualified particles will be crushed and regranulated, and the qualified products will be sift out. Finished film: The qualified products are coated to increase the brightness and roundness of granules. Packaging of finished product: The particles that have been wrapped the film are stored in the ventilated place.

The rapid development of livestock and poultry farming produces a lot of excrement and sewage. The harmful elements of these fouling are too high to be processed by traditional returning way. For this situation, our company has developed the organic fertilizer production line which use high efficient solid-liquid rotten aseptic deodorization technology as the core, and the whole production equipment process includes: high efficient fermentation, raw material mixing, granule processing, drying and packing. Characteristics of Performance  The products of organic fertilizer production line are made of fresh chicken and pig manure, without any chemical composition. The digestive ability chickens and pigs is poor, so they can only consume 25% of nutrients, then another 75% in feed will be excreted with faeces, so that the dry product will contain nitrogen, phosphorus, potassium, organic matter, amino acid, protein and other ingredients. In the urine and manure of livestock, a year of excrement urine of a pig, combined with the cushion material can be retted 2000 a 2500kg high quality organic fertilizer. It contains 11% of organic matter, 12% of organic matter, 0.45% of nitrogen, 0.19% of phosphorous oxide, 0.6% of potassium oxide, and is enough fertilizer for the fertilizer of whole year. These organic fertilizer is rich in nitrogen, phosphorus, potassium and other nutrients, with more than 6% content and more than 35% organic matter content, all of these is above national standard. Working Principle An organic fertilizer production line can not only meet the needs of local fertilizer, but also meet the needs of the surrounding market. Biological organic fertilizer is widely used in fields such as farmland, fruit trees, flowers, landscaping, high grade lawn, soil improvement and so on, which have a good effect. Our country subsidizes the agriculture, and it is very supportive of the industry, so investing in this industries is a good choice.

Our importing company (China) offers from a warehouse in the city of Minsakfilm EVA for the production of triplex. The offered film is made at large factories in China from highly elastic polymer raw materials (ethylene vinyl acetate resins). Through repeated trials and tests, together with Chinese manufacturing partners, we have achieved stable performance in all quality parameters of our film, which ultimately ensures the high quality of triplex glass, its strength and durability. The quality standard of our EVA film is confirmed by a Russian certificate of conformity. In addition, our film under the BeLEva brand has successfully passed the tests of the laboratory in Teplice (Czech Republic) and received an international European certificate. We have the opportunity to order various types of films in production in terms of thickness, transparency, color, baking (gluing) temperature, which allows glass manufacturers to solve a wide variety of projects. The most widely used EVA film is for the manufacture of transparent architectural triplex glass. Such glasses are used in various building structures for both external and internal glazing.

Laminating oven BELEVA (Republic of Belarus) - Equipment for laminating glass of our own production. This type of furnace allows the production of laminated flat and curved glass (triplex) using vacuum technology. This furnace is made to order in accordance with all requirements and parameters of the customer. The overall dimensions and number of furnace sections will correspond to the customer's wishes. Control system: 8.4-inch touch panel, Mitsubishi controller (Japan) of the Melsec IQ-F series and PT 100 thermocouple, at the request of the customer it can be equipped with a Siemens SIEMATIC S7200 controller. Siemens electric automation, Delta vacuum control device, Fotec heater control system (Taiwan).

Our importing company (China) offers to supply Washing machines for glass to order

BELEVA laminating furnace (Republic of Belarus) is an equipment for laminating glass of its own production. This type of furnace allows the production of multilayer flat and curved glass (triplex) using vacuum technology. This furnace is made to order in accordance with all the requirements and parameters of the customer. The overall dimensions and the number of sections of the furnace will correspond to the customer's request. Control system: 8.4-inch touch panel, Mitsubishi controller (Japan) Melsec IQ-F series and PT 100 thermocouple, at the request of the customer can be equipped with a Siemens SIEMATIC S7200 controller. Siemens electric automation, Delta vacuum control device, Fotec heater control system (Taiwan).

The importing company (China) offers an automatic processing center for glass. The entire structure of the machine is made of welded metal rods, which are heat-treated to make them durable. The CNC system is compatible with every brand software and controls the operation of the machine. The X, Y, Z axis adopts high-precision overload screw. The desktop is equipped with automatic positioning systems and a vacuum suction cup. The grinding wheel can be changed automatically using a computer. This machine is suitable for shaped grinding, polishing, drilling and incision. It is widely used for furniture glass, appliance glass, car glass, etc.

Our importing company (China) offers PVB construction and PVB automotive film from a warehouse in Minsk We have the opportunity to order various types of films in the production by thickness, transparency, color, baking temperature (gluing), which allows glass manufacturers to solve a wide variety of projects.

Our importing company (China) offers EVA film for triplex production from a warehouse in Moscow. The proposed film is manufactured at large production facilities in China from highly elastic polymer raw materials (ethylene vinyl acetate resins). Through repeated trials and tests together with Chinese manufacturing partners, we have achieved stable performance in all quality parameters of our film, which ultimately ensures the high quality of triplex glass, its strength and durability. The quality standard of our EVA film is confirmed by the Russian certificate of conformity. In addition, our BeLEva-branded film has successfully passed laboratory tests in Teplice (Czech Republic) and received an international European certificate. We have the opportunity to order various types of films in the production by thickness, transparency, color, baking temperature (gluing), which allows glass manufacturers to solve a wide variety of projects.

Our company - importer (China) offers from a warehouse in the city of Minsk PVB film for construction and PVB for automobiles. We have the opportunity to order various types of films in production in terms of thickness, transparency, color, baking (gluing) temperature, which allows glass manufacturers to solve a wide variety of projects.

Our importing company (China) offers EVA film for triplex production from a warehouse in Moscow. The proposed film is manufactured at large production facilities in China from highly elastic polymer raw materials (ethylene vinyl acetate resins). Through repeated trials and tests together with Chinese manufacturing partners, we have achieved stable performance in all quality parameters of our film, which ultimately ensures the high quality of triplex glass, its strength and durability. The quality standard of our EVA film is confirmed by the Russian certificate of conformity. In addition, our BeLEva-branded film has successfully passed laboratory tests in Teplice (Czech Republic) and received an international European certificate. We have the opportunity to order various types of films in the production by thickness, transparency, color, baking temperature (gluing), which allows glass manufacturers to solve a wide variety of projects.

Machine Automation, Industrial Automation, PLC Programming, Data Logger, IoT Systems, Control Systems, Control Panel, Automation Panel Production, Interface Software. Industrial PCB Electronic Board Design, Mass Production, Embedded Software, PLC Software, Control Panel Production, Industrial Machine Automation, Data Logger, Electronic Circuit Design, Electronic Board Design, Circuit Design with ESP32, Arduino Software, Arduino Circuit Design, Arduino Software Development etc. .

Machine automation, industrial automation, PLC programming, data logger, IoT systems, control systems, control panel, automation panel production, interface software. Industrial PCB electronic board design, mass production, embedded software, PLC software, control panel production, industrial machine automation, data logger, electronic circuit design, electronic board design, circuit design with ESP32, Arduino software, Arduino circuit design, Arduino software development, etc.

The flow meter OGM-R-25/40 series flow meters with mechanical totalizers are designed for accurate measurement of high viscosity diesel, kerosene, motor oil and other viscous liquids. The use of oval gears in meter readers ensures high measurement accuracy over a wide range of pumped product viscosities. The meter body of this flowmeter is made of aluminum and the oval rotor is made of steel. There is an analog counter and a 7-digit display on the mechanical recorder. Oval gear meter OGM-R-25/40 can be used both in stationary technical installations and in mobile vehicles for filling and pumping oil products. Liquid flow meters with oval gears are designed to measure total and one-off quantities of light oil products, liquefied gas, and other non-corrosive liquids. The flow meter OGM-R-25 level gauge can be used both in stationary technical installations and in mobile vehicles for filling and pumping petroleum products. The design of the oval gear flow meter OGM-25/40 includes oval gears, which ensures reliability and high measurement accuracy. Counter with mechanical readout (SU) Working principle of Flow Meter OGM-25/40 The counter with oval gear OGM-R-25 works on the principle that two oval gears rotate and mesh under the action of fluid flow, and each rotation measures a certain volume of fluid. The rotation of the gears is transmitted to the counting mechanism, where it is converted into units of volume. In a word, OGM series oval gear flowmeters are used to transmit liquids with a large viscosity range, and have good repeatability and service life, and can be widely used in petroleum, chemical, pharmaceutical, transportation, food and other industries. Advantages of Oval Gear Flow Meter ◈Compact structure◈Easy maintenance◈Easy to read and operate mechanical display◈Flexible installation◈Low pressure drop Technical Parameters Model OGM-25 OGM-40 Size 25mm/1” 40mm/1(1/2)” Flow Rate Range 20~120L/min 40~400L/min Accuracy ±0.5% Repeatability ≤0.17% Max. Pressure 16Bar 6Bar Dimension 30*26*36cm 36*33*30cm Net weight 7.5kg 19.5kg Gross Weight 8kg 20.5kg Package 1pc/carton 1pc/wooden case

With state-of-the-art machinery and a skilled team, GNT consistently delivers high-quality excavator parts and accessories that meet or exceed industry standards. Our focus on durability, reliability, and performance ensures customer satisfaction.

With state-of-the-art equipment and a skilled team, GNT consistently delivers high quality excavator parts and accessories that meet or exceed industry standards. Our focus on durability, reliability and performance ensures customer satisfaction.

With state-of-the-art machinery and a skilled team, GNT consistently delivers high-quality excavator parts and accessories that meet or exceed industry standards. Our focus on durability, reliability, and performance ensures customer satisfaction.

With state-of-the-art machinery and a skilled team, GNT consistently delivers high-quality excavator parts and accessories that meet or exceed industry standards. Our focus on durability, reliability, and performance ensures customer satisfaction.

With state-of-the-art machinery and a skilled team, GNT consistently delivers high-quality excavator parts and accessories that meet or exceed industry standards. Our focus on durability, reliability, and performance ensures customer satisfaction.

With state-of-the-art machinery and a skilled team, GNT consistently delivers high-quality excavator parts and accessories that meet or exceed industry standards. Our focus on durability, reliability, and performance ensures customer satisfaction.

FEATURES + BENEFITS. Powered by a 166cc Honda GCV170 quick start 4-stroke engine. cutting speed. Dual MicroCut blades use 4 cutting surfaces for ultra-fine cutting and superior cut quality. Multiple cutting options with Clip Director 3-in-1 for mulching, bagging or rear ejection. Durable steel/resin 21 in. steel cutting deck 7-position height adjustment from 1 inch. up to 4" with 2-lever adjustment knob. Foldable EZ handle with 2-position 8" height adjustment. front and rear wheels ensure smooth operation. Capacity 1.9 bushels. ) 21. Engine Honda GCV170 Deck Material Steel/Resin Discharge Mulch, Bag, Rear Discharge Cutting Height (inches) 1–4 Cutting Methods Mulch, Bag, Rear Discharge. Mowing speeds. Variable speed, self-propelled Max. Cutting speed (mph) 4 Blade type. Double blade MicroCut. Package volume (bushels) 1.9 Fuel tank capacity (qt) 0.95. Front tire size (in) 8. Rear tire size (in) 8. Dimensions L x W x H (in) 61 x 22 5/8 x 40 7/8. Engine type 4-stroke.

Automatic line for the production of bricks from the manufacturer (Cosmec). It is possible to supply a full-fledged turnkey plant, as well as individual units or components, in order to modernize your existing equipment. The composition of the line, the degree of automation and equipment may vary depending on the goals and objectives of the customer. The situation is similar with the pricing policy: the price of a line for the production of bricks can vary greatly. Therefore, when inquiring about the cost of equipment for the production of bricks, it is advisable to first take into account what your actual preferences are and whether the line meets your technical requirements (composition of the line, range of finished products, productivity, preparation of project documentation, installation supervision, degree of automation, etc. ) - only after that it is possible to set a preliminary price and real delivery times.

Equipment for the production of mineral wool, on the example of the basic model 30KA Automatic line for the production of high quality mineral wool from the manufacturer. The capacity of the recommended automatic lines varies from 8,000 tons to 60,000 tons of finished product per year or more. You can quickly contact a specialist to obtain the required information or send a request using the contact details provided on this portal. In addition to the standard supply of stone wool production equipment, the Company can provide a full range of services: from site selection, terrain layout, construction and building reference materials, equipment installation, commissioning, staff training, to the modernization of old stone (mineral) wool production lines. The cost and terms of delivery of a new automatic line for the production of stone wool, warranty obligations, as well as services for the maintenance or modernization of existing equipment are negotiated on an individual basis. At the same time, it should be borne in mind that the indicated cost is not decisive and in the process of discussing a commercial offer it can significantly (!) Change both up and down.

A mini-plant for the production of ceramic bricks is capable of not only producing high-quality bricks and / or tiles, but also has the ability to manufacture products with a significantly larger assortment than a large enterprise. The standard output is about 4 million bricks per year. This is an almost ideal option for developing a niche for the production of building materials while implementing original unique design solutions, as well as for filling the market with new and effective offers. For example, the described line is capable of producing both thin light partition blocks, and "American" (narrow brick), and facing tiles, and facing bricks with a textured surface. If you are interested in purchasing a mini-factory and you want to open the production of ceramic bricks and other building elements, use the following contact details of a specialist in charge of the CIS direction. Or, use the feedback form on the site. In order for your request not to fall into the basket and for it to receive the correct and really necessary answer, in this case, a commercial offer, we strongly recommend that you do the following and indicate in the appeal: The performance you require. Sizes of manufactured products, degree of hollowness (if necessary), strength, etc. The presence of a chemical analysis of raw materials that are planned to be used for the manufacture of products. Availability of main energy carriers and available capacities (gas, water, electricity, etc.). Address of the location and installation of the line. For whom the commercial offer should be prepared: private person (full name), organization (name).

The wood drying chamber model MGLD is designed for drying lumber in piles to a final moisture content of 8-12% with the possibility of front loading with a loader. The composition of the drying chamber includes: a body made of high-strength aluminum alloys, with an air circulation system installed in it (fans, diameter 800mm, each fan has 6 rotary aluminum blades), a supply and exhaust ventilation system (air dampers), a heating system (air heaters, thermal valves, pump, shut-off valve), humidification system (nozzles, pipes, irrigation, valves), air heating system, electrical cabinet, fully automated control system. Gates: lifting and sliding. Drying of wood in the chamber is carried out due to the reverse movement of heated air between the rows of pre-laid wood. Air is heated by radiators due to the circulation of superheated water in them. The MGLD model dries wood of any species, is reliable and economical in operation.

Brand New Product, PRODUCT OVERVIEW This is 20in. The Husqvarna 450 Rancher 2-stroke chainsaw is an outstanding all-round chainsaw for anyone who appreciates pro-level power and performance. X-Torq® 2.8 HP, 50.2 cc engine cm reduces fuel consumption and emissions. Meanwhile, the built-in fuel pump, Smart Start® technology and auto-return switch ensure smooth starting. 20 inches. The handlebar is equipped with an inertia-activated chain brake to reduce kickback and increase safety. The Smart Start® system with built-in fuel pump, automatic return switch and easy-to-pull start cord allows you to work quickly and with minimal effort. A simple side tension system allows for quick chain adjustments during operation. The LowVib® anti-vibration system helps reduce vibration, increasing user comfort and reducing user fatigue. 2 year limited warranty. FEATURES + BENEFITS Powerful 2.8 hp X-Torq® 2-stroke 50.2cc engine. reduces fuel consumption and gasoline emissions Rugged and manoeuvrable 20-inch. ideal for yard cleanup, firewood cutting, light felling work, etc. Smart Start® technology with built-in fuel pump, auto-reset switch and easy-to-pull starter cord ensures quick engine starts with minimal effort Inertia-activated chain brake, reduces kickback to reduce injury during operation Automatic oiler ensures constant supply of chain lubrication Simple side tension system allows quick adjustments during operation LowVib® anti-vibration system reduces vibration levels to help minimize operator fatigue Quick release air filter for easy cleaning and replacement Key Features Part Number No. 106858 Brand name Husqvarna Manufacturer's warranty 24 months parts / 24 months labor Ship weight 18.9 lbs Rod length 20 Displacement (cm3) 50.2 Power 2.8 Fuel capacity (oz) 15.22 Gas:oil Fuel ratio mixture 50:1 Chain brake Yes Regulus Powered Oil Pump Supply Primer Bulb Yes Low Vibration Handle Yes Toolless Chain Tensioning No Case Included No Dimensions L x W x H (in) 16 x 8.9 x 11.5 Product Weight 18.9

Brand New Product WHAT'S INCLUDED (1) High Pressure Washer (5) Quick Release Nozzles (1) Trigger Gun (1) 50ft Spray Wand. High pressure hose (1) Wheel kit (1) Detergent hose and tank (1) Engine oil bottle (1) Funnel (1) Hose strap FEATURES + BENEFITS Ergonomic grip gun reduces fatigue High pressure hose storage on board Includes hose storage strap, spray gun and spray gun. KEY FEATURES P/N 108060 Brand Champion Power Equipment Manufacturer's Warranty 2 years consumer / 1 year commercial Weight 111.0 lbs Pressure (PSI) 3500 Flow (GPM) Engine 2.5 Honda GX200 Engine Model GX200 Engine Displacement ( cc) 196 Pump Heavy Duty Triple Tip Quick Hose Type 50 ft. High Pressure Fuel Capacity (Gal) 0.8 Fuel Type Gasoline Chemical Injector Yes Regulated Pressure Yes Engine Oil Type 10W-30 Engine Oil Included Yes Pump Oil Included Yes Low Oil Shutdown Yes Dimensions L x W x H (in) 44.9 x 23.9 x 28.2 Product weight 102

90mm16D/20D Rubber Extrude Machine： The extruder screw, barrel, steel sleeve, press roll, side roll and other machine body parts have reached the same processing standard of German extruder, and the accuracy level has reached the international leading level. SCREW Japanese material (SACM645): less deformation than domestic material, improve extrusion stability, and double the wear resistance of ordinary screw (38CrMoAL produced by Shanghai Baosteel) Phahse Motor(Italy)：The output speed and torque are constant within the rated speed, so the speed of the motor is more stable than that of the original AC asynchronous motor, and the rubber products are more stable and the qualified rate is improved. Because the synchronous servo motor uses the magnetic cylinder as the electric field, this characteristic makes the motor energy-saving 10-20% Feeding chamber and body Q345 low-carbon steel (good plasticity) machining center is used to form the fuselage in one body, punching type, high-pressure plug to block the water channel, with removable water channel cleaner, which has good water circulation effect. There are no welding points in the fuselage, no stress and deformation caused by welding, high processing accuracy, high coaxiality of fuselage assembly, reducing wear of screw steel sleeve, and prolonging service life of the equipment. Vacuum area is processed by 38CrMoAl with no welding joint, which can eliminate the stress and deformation caused by welding and improve the assembling: "coaxiality". The fuselage adopts spiral water circulation, the vacuum adopts perforation, and the high pressure plug closes the cycle. Compared with other brands of extruders, the fuselage assembly accuracy and the high temperature control ability are improved. Rossi Gearbox，Bearings are SKF brand, integrated casting box. Compared with domestic reducers, the transmission accuracy and efficiency are high, energy consumption is saved, noise is low, and service life is long.

Manufacture of sandwich panels on the example of the universal line JF100. Delivery of equipment is carried out directly from the manufacturer from China. Terms of design, installation, staff training and warranty service are negotiated on an individual basis. The considered line is offered only as a sample. In each case, productivity, quality requirements for products, range of products, degree of automation, etc. are determined based on the needs of the customer. The information is provided by a direct certified supplier authorized to act on behalf of the manufacturer in Russia and the CIS countries - HEBEI SUOFU TRADING CO., LTD. Different from the production of standard sandwich panels, the main purpose of the JF100 line is to produce a new type of sandwich panel, namely, rock wool polyurethane composite board with improved functions of fire resistance, heat preservation, thermal insulation, sound insulation, waterproof, lightness and environmental protection. The production of a new generation of sandwich panels from mineral wool and polyurethane combines the reaction technology of machine, electrical, liquid and chemical polymerization of polyurethane with mineral wool and is a fully automatic continuous production line.

Clutch MERCEDES Actros/Axor set d400 3400700702.

From material selection to factory inspection, the most comprehensive international standards are adopted. Products use standard OEM SPCC and HT250 materials to ensure product life from source. After the fine processing of the CNC machining center, semi-finished products can only be installed after the dynamic balance test is 100% correct. Once installed, these products are 100% balance tested and comprehensive performance tested to ensure that each one has a lifespan of at least one year. PRODUCT DETAILS Name New Design OKA/BEWO Heavy Truck Clutch Cover SACHS 3482021031 380mm For VOLVO FH. Product name 3482021031 Size 380. VOLVO application. Product features and characteristics Brand: BEWO; Material: iron / steel; Application: Heavy truck; Size: 380mm; Type: clutch cover. Payment method L/C, T/T Customize YES 1000. Delivery time: Negotiate logistics information 20000 pieces per month; Scope Clutch release plate.

Gangway (ramp) GKA 250.30.2S2 Model GKA 250.30.2S2 Load capacity 1300 kg/pair Length 2500 mm Width 300 mm Own weight 13 kg pcs. Production time from 3 days Guarantee 12 months Our advantages: - Convenient terms of payment; - Delivery to the TC terminal; - Individual developments; - Experience more than 10 years; - A wide range of goods; - Free consultation of experts. Need custom development? Our experts will calculate and answer you as soon as possible. With respect to you and your business, Alliance Group of Companies LLC!

Gangway (ramp) GKA 250.30.2S1 Model GKA 250.30.2S1 Load capacity 1100 kg/pair Length 2500 mm Width 300 mm Own weight 9 kg pcs. Production time from 3 days Guarantee 12 months Our advantages: - Convenient terms of payment; - Delivery to the TC terminal; - Individual developments; - Experience more than 10 years; - A wide range of goods; - Free consultation of experts. Need custom development? Our experts will calculate and answer you as soon as possible. With respect to you and your business, Alliance Group of Companies LLC!

Ramps GKA 250.30/3 Load capacity up to 1200 kg/pair Length 2500 mm Width 300 mm Net weight 14 kg/pc. Production time from 3 days Warranty 12 months Call us and we will produce for you exactly what you need!

Aluminum ramps for buggies Model GKA 250.30/2 Load capacity up to 1200 kg/pair Length 2500 mm Width 300 mm Net weight 11 kg/pc. LLC "Group of Companies "Alliance"" - Production, sale, repair, rental, exchange of aluminum ramps (gangways for the arrival of motor vehicles: motorcycles, ATVs, snowmobiles, buggies, tricycles. More than 50 ready-made sets of loading ramps (ramps) and More than 100 standard models Production time from 3 working days Warranty 1 year Please note that our company is a manufacturer of aluminum ramps made of lightweight alloys Thanks to the many years of experience of our specialists, we manage to occupy a leading position in this market. company you get: - Individual approach - A thorough study of your task - Real terms of order fulfillment - High quality and a guarantee for all products and work performed - Affordable cost, flexible payment terms We offer our customers a wide selection of finished products, at the moment we produce ramps load capacity from 500 kg to 85,000 kg Design and manufacture of non-standard art ramps made of aluminum and other lightweight alloys. In stock and on order. Delivery to any region of the Russian Federation. Give us a call and we'll make exactly what you need!

Gangway (ramp) GKA 250.30.2/1 Model GKA 250.30.2/1 Load capacity up to 700 kg/pair Length 2500 mm Width 300 mm Net weight 8 kg/pc. Production time from 3 days Guarantee 12 months Our advantages: - Convenient terms of payment; - Delivery to the TC terminal; - Individual developments; - Experience more than 10 years; - A wide range of goods; - Free consultation of experts. Need custom development? Our experts will calculate and answer you as soon as possible. With respect to you and your business, Alliance Group of Companies LLC!

Ramps GKA 250.30 2C Load capacity 800 kg per pair Length 2500 mm Width 300 mm Net weight 13 kg pcs. Production time from 3 days Warranty 12 months Own production of aluminum gangways, any size and load capacity. Warranty for finished products 12 months. Delivery throughout Russia. The production time of ramps is from 3 days. There are more than 50 ready-made kits in stock. You can pay in any way convenient for you: - Cash - Bank transfer - Yandex money - QIWI wallet - Electronic money all products and work performed - Affordable cost, flexible payment terms Call us and we will produce for you exactly what you need!