Hardware & Spare Parts & Supplies in bulk on Qoovee

ХарактеристикиОсновныеТип прицепаПолуприцепВид прицепаОдноосныйПроизводитель FermakСтрана производительТурцияТип разгрузкиНазадСъемные бортаДаГрузоподъемность 1.5 (т)Скорость движения 35.0 (км/ч)Габаритные размерыВысота борта450 (мм)Длина2.5 (м)Ширина1.6 (м)Высота1.45 (м)

ХарактеристикиОсновныеТип прицепаПолуприцепВид прицепаОдноосныйПроизводитель FermakСтрана производительТурцияТип разгрузкиТрехстороннийСъемные бортаДаГрузоподъемность 2.5 (т)Скорость движения 35.0 (км/ч)Габаритные размерыВысота борта450 (мм)Длина3.0 (м)Ширина1.9 (м)Высота1.65 (м)

ХарактеристикиОсновныеТип прицепаПолуприцепВид прицепаОдноосныйПроизводитель АвилонСтрана производительРоссияТип разгрузкиТрехстороннийСъемные бортаДаГрузоподъемность 2.0 (т)Скорость движения 45.0 (км/ч)Тормозная системаОдноконтурная механическаяВес 525 тОбъем кузова с надставными бортами0.4 (куб. м)Габаритные размерыВысота борта400 (мм)Длина3750 мШирина1550 мВысота1800 м

ХарактеристикиОсновныеТип прицепаПолуприцепВид прицепаОдноосныйПроизводитель АвилонСтрана производительРоссияСъемные бортаНетГрузоподъемность 6.5 (т)Скорость движения 35.0 (км/ч)Тормозная системаОдноконтурная механическаяВес 2.0 (т)Объем кузова с надставными бортами7.5 (куб. м)Дополнительные характеристикиГабаритные размеры508,5х215х233Колея, см190Минимальный радиус поворота, м7.5Дорожный просвет, мм375Шины400х60х15,5 14PR TVSРабочее давление в гидросистеме, МПа16,0Время полного подъема кузова, сек.10±2Угол подъема кузова, град.87Срок службы, не менее лет5Обслуживающий персонал, чел.1 (тракторист)

Multifunctional Y-piece for connecting tubing. Used in laboratory or industrial installations, for example for connecting bends, vacuum lines, etc. The adapter is made of high quality polypropylene and can withstand autoclaving.

An adapter used to connect various pipes, straight and seamless. Material - high quality polypropylene, resistant to many aggressive substances. Withstands high heating temperatures, so it can be hot steam treated and autoclaved. When autoclaving, it is necessary to set the standard mode - 1 atm, 110 ° С. Polypropylene adapters are of high quality and durable, therefore they are widely used for connecting pipes. Characteristics Nominal outer diameter, mm 8/9/10 Hole, mm 4.5 Outer ridge diameter, mm (max./min.) 6,3 / 9/11

An important component of the vacuum pump, a tube with the largest diameter of 14.5 mm and the smallest diameter of 9 mm. Has a length of 37 cm. Polypropylene is a modern, high-quality and durable material, therefore both polypropylene vacuum pumps and tubes made of this material serve for a long time and do not present any difficulties in their care. In the Prime Chemicals Group store, you can buy the pump itself, of which this tube is a part. Characteristics Manufacturer country Italy Length mm 37 Largest / smallest diameter, mm 14.5 / 9

The conical plug with a ground cut has an ergonomic shape that makes it easy to remove from the container. Suitable for use with any container, the neck of which fits the cork in size. Suitable for sealing vessels containing easily evaporating, volatile substances. Also protects the contents of vessels from debris and dust. If the container tilts or even falls without breaking, the stopper will prevent its contents from falling out or flowing out.

Samples, materials and samples of various substances are usually stored in sealed tubes. Because tubes are often sold without caps, they must be purchased separately. Made of high quality polyethylene, these covers are an excellent choice. The well-thought-out shape of the stoppers allows you to easily and quickly seal the tube, and if necessary, you can open it without effort. The stopper fits snugly against the tube so that the contents of the container will not spill. The corks are multi-colored, so they can serve as additional filters to help differentiate the contents and reduce the risk of accidentally picking up the wrong tube. Registration certificate of stoppers for 16 mm test tubes - No. FSZ 2011/09223 dated February 25, 2011

The cutting-and-milling scraper SDRF-3-S is intended for dewaxing (scraping) mechanical cleaning of the inner surface of tubing tubing 60, 73 and 89 from asphalt-resin-paraffin deposits (ARPO) in the process of oil production by electric submersible pumps and the fountain method. The RD-2 cutter and the L-1 blades are made of 20X steel or plastic. Characteristics of the SDRF-3-S scraper: Overall length: 1500 - 1900 mm Scrap diameter: 26, 28, 30, 32 mm Cutter diameter: 32 - 68 mm Number of cutters: 3 pcs. Weight: from 14 kg Link to detailed description: Manufacturer: Ecolight-Geotechnika LLC

Apiary knife 130 mm. Designed for unsealing honeycomb frames before pumping out honey, cutting combs, cutting off wax growths. It features a thin blade - 0.8 mm. This knife has excellent cutting characteristics, sharpens well, and is easy to use. The new fastening system ensures that the blade is stable at the fold points, that the bracket is thick enough and that the handle is firmly seated. Very simple and easy to use. Significantly increases the productivity of the beekeeper. Blade dimensions 130x30x0.8 mm. Blade material Stainless carbon steel 40X13 Handle material Wood Knife length 260 mm. Weight 70 g.

Apiary knife 180 mm. Designed for unsealing honeycomb frames before pumping out honey, cutting combs, cutting off wax growths. It features a thin blade - 0.8 mm. This knife has excellent cutting characteristics, sharpens well, and is easy to use. The new fastening system ensures that the blade is stable at the fold points, that the bracket is thick enough and that the handle is firmly seated. Very simple and easy to use. Significantly increases the productivity of the beekeeper. Blade dimensions 180x30x0.8 mm. Blade material Stainless carbon steel 40X13 Handle material Wood Knife length 310 mm. Weight 75 g.

Apiary knife 205 mm. Designed for unsealing honeycomb frames before pumping out honey, cutting combs, cutting off wax growths. It features a thin blade - 0.8 mm. This knife has excellent cutting characteristics, sharpens well, and is easy to use. The new fastening system ensures that the blade is stable at the fold points, that the bracket is thick enough and that the handle is firmly seated. Very simple and easy to use. Significantly increases the productivity of the beekeeper. Blade dimensions 205x30x0.8 mm. Blade material Stainless carbon steel 40X13 Handle material Wood Knife length 335 mm. Weight 90 g.

Electric knife (black) 230 mm. 40 W Designed for unsealing honeycomb frames before pumping out honey, cutting combs, cutting off wax growths. Very simple and easy to use. Significantly increases the productivity of the beekeeper. The work of the knife provides for short-term cycles during which the knife cools down while cutting the backbone and heats up while the beekeeper prepares the next frame. The knife is treated with a protective layer for transportation and storage. The blade of the knife is made of high quality carbon steel, grade "65G". Knife power sources: 12V car battery, 220 / 12V step-down transformer / generator, 12V battery charger Blade material 65G carbon steel < / td> Blade dimensions 230x40x2 mm. Operating voltage 12 V . Power 40W Operating temperature 70 -90 C ° Heating time to operating temperature 30 sec. Knife length < / td> 350 mm. Weight 300 g

Electric knife (stainless) 230 mm. 40 watts with limiter Designed for unsealing Honeycomb frames before honey pumping, cutting combs, cutting off wax growths. It is very simple and easy to use, it significantly increases the productivity of the beekeeper's work. The work of the knife provides for short-term cycles during which the knife cools down while cutting the beekeeper and heats up while the beekeeper prepares the next frame. The knife is equipped with a sensor that excludes overheating of the knife. The knife blade is made of high quality carbon stainless steel, brand "40X13". The knife's power sources: 12V car battery, step-down transformer / generator 220 / 12V, 12V battery charger. Blade dimensions 230x40x2 Blade material Stainless carbon steel 40X13 Handle material Wood Working voltage 12 V. Power 40 W. Operating temperature 70-90 ° C Heating time to operating temperature 30-40 sec. < / tr> Knife length 350 mm. Weight 300 g.

Electroknife (stainless steel) 230 mm. 40 W. Designed for printing bee frames before pumping out honey, comb cutting, cutting off wax growths. Very simple and easy to use, significantly increases the productivity of the beekeeper. The operation of the knife provides for short-term cycles during which the knife cools down during the cutting of the capping and heats up while the beekeeper prepares the next frame. The knife blade is made of high quality carbon stainless steel, grade" 40X13 ". Knife power sources: 12V car battery, 220 / 12V step-down transformer / generator, 12V battery charger. Blade material Stainless carbon steel 40X13 Blade dimensions 230x40x2 mm. Operating voltage 12 V. Power 40W Operating temperature 70-90 ° C Heating time to operating temperature 30 sec. < / td> Knife length 350 mm. Weight 300 g.

Electroknife (stainless) 280 mm. 70 W. Designed for trimming the beading from the honeycomb. It is very simple and easy to use, significantly increases the productivity of the beekeeper. The work of the knife provides for short-term cycles, during which the knife is cooled during the cutting of the notch, and heats up while the beekeeper prepares the next frame. The knife blade is made of high quality carbon stainless steel, grade "40X13". Knife power sources: 12V car battery, step-down transformer / generator 220 / 12V, battery charger for 12V. Blade dimensions 280x40x2 Blade material Stainless carbon steel 40X13 Handle material Wood < / td> Operating voltage 12 V. Power 70 W. Operating temperature 70-90 ° C Heating time to operating temperature 30 sec. Knife length 400 mm. Weight 350