Construction Materials in bulk on Qoovee

Paint roller for work with WATER PAINTS

Paint roller for work with VARNISHES

Paint roller MASTER for work with enamels

Paint brush "Lucky"

Paint brush "Enamels"

Woodwork brush

The production of paint brushes is one of the main activities of AKOR. Remaining a recognized leader in the brush market for many years, AKOR has accumulated vast experience in the development and creation of the highest level painting tools that are not inferior to the best world analogues either in quality or in the variety of assortment.

Product Description: The specification of mold additive cured silicone rubber, which also uses additive treatment silicone rubber and platinum curing silicone rubber, is usually a two-component liquid silicone rubber, stress vulcanized (RTV-2). Applications: Additive cured silicone rubber has a wide application, such as food mold making (candy, cake, biscuit, chocolate, ice cubes, fondant, etc. foaming, making breast prostheses, artificial leather, human body, Model Code GTSIL-P10 GTSIL-P15 GTSIL-P20 GTSIL-P25 GTSIL-P30 GTSIL-P35 GTSIL-P40 Shore A 8-10 14-16 19-21 24-26 28-30 34-36 38-42 Viscosity - SP 3000-5000 4000-6000 4000-7000 5000-8000 6000-9000 6000-10000 4000-6000 1:1 1:1 1:1 1:1 1:1 1:1 - MPa 3.5-5, 5 4-6 4-6 4-6 4-6 4-6 3.5-5.5 Shrinkage - % 0.10% 0.10% 0.10% 0.10% 0.10% 0.10% 0.10%. Elongation - % 500-600% 500-600% 500-600% 400-500% 400-500% 350-500% 300-450%. free of loose material If necessary, especially on porous substrates, use a suitable release agent such as petroleum jelly or soap solution. nent A (silicone base) before use, since the filler can quickly exfoliate during long-term storage. Weigh 100 g of Component A (silicone base) and 3 g of Component B (hardener) in a clean container. Stir until the hardener is completely dissolved in the base. You can use manual or mechanical change, but do not change for an extended period of time and do not allow the temperature to rise above 35°C (95°F). With frequent falling under a small amount, which are exceptional characteristics of component A (silicone base) and component B (hardener). It is highly recommended to remove the air entrapment in the vacuum tank, the intake of the mixture is fully expanded and then collapsed. After another 1-2 minutes in a vacuum, you can check the mixture if there are no air bubbles in it. Vacuum deaeration of the mixture results in an increase in volume by 3-5 times, so a sufficiently large container should be chosen. Note. In the absence of vacuum deaeration equipment, air entrainment can be minimized by mixing a small amount of component A (silicone base) and component B (hardener), and using a brush to accurately determine 1-2 mm of layer on the original. Leave the temperature until the bubbles disappear on the surface and the layer slows down. With the addition of additional bases and hardener and the possibility of implementation for the final form. 3. Filling the mixture and curing. Pour the mixture of Par A (silicone base) and Part B (hardener) as soon as possible onto the original, avoiding air trapping. The catalyzed material cures to a flexible rubber within 24 hours at ambient temperature (22-24°C/71.6-75.2°F), after which the mold can be separated from the original. If the operating temperature is much lower, the curing time will be longer. If the room temperature or humidity is very high, the run time of the catalyzed mixture will be shortened. The final mechanical properties of the mold are achieved within 7 days.

Rear projection film with variable transparency function - sticks on any glass surfaces in order to adjust the transparency of the glass in a fraction of a second from the remote control: from matte / gray to transparent. Range of application of smart film: - high-tech analogue of blinds and curtains, - use of surfaces with smart film for advertising screens, video showcases (facades, showcases), - use as zoning of premises, partitions (office and house). - glazing of any facades, balconies etc. PRICE FOR M2. (cut or cut with a contact group). Wholesalers Discounts!!!

Smart film Proektsia (Projection) with the function of variable transparency from gray to transparent is a special polymer liquid crystal film that is glued to any glass surface in order to adjust the transparency of the glass in a fraction of a second from the remote control: from matte to transparent and from gray to transparent. Just one press of a button - and the glass can hide the situation from prying eyes or become transparent. Smart tint film PDLC is an innovative solution that has a wide range of applications: car tinting, an alternative to blinds and curtains, confidential rooms (negotiation rooms, recreation areas, fitting rooms), office / room partitions, facade glazing. The rear projection film, in addition to the function of changing the transparency of the glass, can act as a surface for video projection - a good bonus to the main functionality! The image seems to be “hanging in the air”. The viewer does not block the beam from the projector. Usually the viewer does not see the source of the projected image, the projector is hidden behind the screen. Obtaining a seamless and sufficiently large image compared to displays Controlled by the remote control. Low voltage is absolutely safe for humans. Economical power consumption 5 W/m2. Characteristics: 1. Total thickness - 0.35 mm 2. Roll width - 150 cm, length - 75 m 3. Power consumption - 5 W / m2 4. Operates under voltage - 48 V 5. UV protection - 99% 6. Light transmission in transparent mode - 82% 7. Light transmission in matt mode - 6% 8. Temperature range - from -40 to + 70 9. Service life - 10 years.

Smart film Proektsia (Projection) with the function of variable transparency from matte to transparent is a special polymer liquid crystal film that is glued to any glass surface in order to adjust the transparency of the glass in a fraction of a second from the remote control: from matte to transparent and from gray to transparent. Just one press of a button - and the glass can hide the situation from prying eyes or become transparent. Smart tint film PDLC is an innovative solution that has a wide range of applications: car tinting, an alternative to blinds and curtains, confidential rooms (negotiation rooms, recreation areas, fitting rooms), office / room partitions, facade glazing. The rear projection film, in addition to the function of changing the transparency of the glass, can act as a surface for video projection - a good bonus to the main functionality! The image seems to be “hanging in the air”. The viewer does not block the beam from the projector. Usually the viewer does not see the source of the projected image, the projector is hidden behind the screen. Obtaining a seamless and sufficiently large image compared to displays Controlled by the remote control. Low voltage is absolutely safe for humans. Economical power consumption 5 W/m2. Characteristics: 1. Total thickness - 0.35 mm 2. Roll width - 150 cm, length - 75 m 3. Power consumption - 5 W / m2 4. Operates under voltage - 48 V 5. UV protection - 99% 6. Light transmission in transparent mode - 82% 7. Light transmission in matt mode - 6% 8. Temperature range - from -40 to + 70 9. Service life - 10 years.

Beige Marble - Botanica

Beige Marble - Dark Emperador

Beige Marble - Crema Bella

Beige Marble - Bursa Beige

Afyon White Marble

Afyon Sugar Marble

Marmara Marble - Sperenza

Marmara Marble - Epica Light

Marmara White Marble

PC Bottle Scrap (Water Bottle) PC Bottle Scrap (Water Bottle)DetailsPlace of Origin:United Kingdom.Model Number:PC bottle scrap..packing:Compressed Balesname:Polycarbonate Pc Granules.Material:Polycarbonate.Characteristic:100% CleanTransparency:100%

HDPE Milk Bottle Scrap/HDPE Milk Bottle Flakes/HDPE Milk Bottle Regrind HDPE Milk Bottle Scrap/HDPE Milk Bottle Flakes/HDPE Milk Bottle RegrindWe are exporters of large quantity of HDPE Milk Bottles Scrap with good quality that meet every standardHDPE Milk Bottle Scrap..Quality : HDPEClear natural color..Clean and stored inside .Dry material.Packed in bale.Form filmColor clearPacking in baleOrigin post-commercialQuantity per load 27-28MT in 40ft containerWe also have the following products:- HDPE Clear/Natural Regrind (clean and washed)- HDPE Clear/Natural Scrap Baled- HDPE White Regrind/Baled (clean and washed)- HDPE Milk Bottle Regrind.- LDPE Film Baled 100, 99/1 and 98/2- LDPE Clear/Natural Regrind- LDPE White RegrindHDPE milk bottle scrapHdpe flakeHDPE Drum in baledHDPE RegrindLDPE Clear film scrapPet bottle scrapPet flakes hot washedGreen pet strip scrapPC water bottle scrapPC Water bottle regrindPC CD / DVD METALIZED AND CLEAR SCRAPBopp film roll scrappp jumbo back scrapPP super sack scrapPP big rope scrapPP bucket scrapPMMA Acrylic sheet scrapLLDPE film scrapEVA film roll scrapEPS Block scrap

PET Bottle Scrap/PET FlakesPlace of Origin:United Kingdom.Brand Name:PET BottlesModel Number:ISO 9001.Product Name:PET Plastic Bottles ScrapColor:Clear, White, Mixed Color.Material:Polyurethane..Grade:100% Clean, 100% Clear PET BottlesSource:Water Bottles, Juice BottlesColor ratio:Clear 100%PET Bottles:100% Transparent clear, 100% blue, 100% green balesPVC:Less than 0.01%Water Content:Less than 0.01% moistureImpurity:No Caps, rings, or labelsPackaging DetailsIn Bales 50X50X80 cm at 80 Kg/Bale. Flakes washed or unwashed in 50 Kg used PP bags, 25 Mt. in each 40' HQ ContaineritemvaluePlace of OriginUnited KingdomBrand NamePET BottlesModel NumberISO 9001Product NamePET Plastic Bottles ScrapColorClear, White, Mixed ColorMaterialPolyurethaneGrade100% Clean, 100% Clear PET BottlesSourceWater Bottles, Juice BottlesColor ratioClear 100%PET Bottles100% Transparent clear, 100% blue, 100% green balesPVCLess than 0.01%Water ContentLess than 0.01% moistureImpurityNo Caps, rings, or labels

Sizer: fit 390x390x43, overall 455x455x180 Color: Brown. Red. Green Weight: 5.2 kg. Warranty: 5 years Production company "Tesera" offers protective caps for fence posts made of polymer-sand composite of its own production. Advantages of PPK fence hoods The main advantages of PPK hoods, designed to protect pillars made of stone, brick or blocks from weather factors, are: high aesthetics, thanks to which the structure acquires a finished look; compatibility with fence construction materials; high level of resistance to moisture, high and low temperatures, temperature extremes; resistance to mechanical damage; high strength of fixation on fence posts; wear resistance; the ability to maintain the original appearance until the end of the service life; durability. The light weight of the PPK intake caps makes it easy to install and remove the protective tops. Caps with an original design fit perfectly into the landscape of the site.

Polymer sand hatches have long replaced cast iron and concrete counterparts. Due to the material of manufacture, polymer sand hatches combine the strength of cast iron, the ability to select the required load, the choice of color in combination with paving slabs or lawn. Advantages: Easy assembly Durability Economical Combination with other elements from other material Characteristics of goods: Composition: 75% sand; 25% polymers; dye. Types of hatches and gratings: Hatch revision PPK type "dacha" d-560 up to 0.8t. Black; 750 rub. Inspection hatch PPK type "LM" (light small) d-580 up to 1.5t. Black; 860 rub. Inspection hatch PPK type "LM" (light small) d-580 up to 1.5t. Green, red; 900 rub. Hatch revision PPK type "L" (light) d-580 up to 3t. Black;1260 rub. Hatch revision PPK type "L" (light) d-580 up to 3t. Green, red; 1300 rub. Hatch revision PPK type "C" (medium) d-600 up to 6t. Black;1520 rub. Hatch revision PPK type "ULSP" (Reinforced average) d-630 up to 7t. Black;1980 rub. Hatch revision PPK type "ULSP" (Reinforced medium) d-630 up to 12.5t. Black; 2100 rub. Hatch revision PPK type "ULTP" (Reinforced heavy) d-640 up to 15t. Black;2350 rub. Hatch revision PPK type "ULTP" (Reinforced heavy) d-640 up to 25t. Black;2850 rub. Hatch revision PPK type "ALTP" (Reinforced main) d-640 up to 25t. Black;4130 rub. Reinforced storm water inlet round heavy PP (ADKT) d-640 25t black; 3990 rub. Reinforced storm water grate heavy PP (ARDTP-B) 890X590X80 black; 4030 rubles. Reinforced storm water grate heavy PP (ARDTP-B) 830X410X70 black.3160 ​​rub.

Advantages of polymer-sand paving slabs "Parquet" Among the advantages of polymer sand tiles, it should be noted: high wear resistance; service life of at least 30 years; high level of moisture resistance; frost resistance due to the lack of water absorption; low level of thermal conductivity, excluding the formation of ice or snowdrifts on the coating; anti-slip properties; acid resistance and oil resistance; high maintainability; ease of installation and dismantling with subsequent installation; the ability to maintain its original appearance until the end of the life of the coating. The aesthetic tiles are available in a variety of colours. Characteristics of polymer-sand paving slabs "Parquet": – Product size (LxWxH): 330x330x30 — Weight of 1 tile: 3.8 kg – Number of tiles in 1 sq.m.: 9 pcs. – Number of tiles on a pallet: 20 sq.m - price for 1 piece 145 rubles. – price for 1 sq.m 1300 rub

Plastic injection molding services: weight from 0.5g to 800g; park of injection molding machines 20 machines from 38 to 330 tons; areas for maintenance of molds, assembly and processing of products, drying of raw materials; Extensive experience with various plastics. The company is certified according to QMS ISO 9001:2015.

100% Safe Delivery  100% Products Quality Production  100% On-Time Shipment Protection  100% Payment Protection  We offer free shipping and delivery to all customers.  Delivery is made directly to your doorstep.  Delivery takes just 3-5 working days. 

Depending on the number of products, the delivery time may be longer.

Temperature resistance 100-150 in. C. Hardness 65 Shore A. Feature: High absorbency. Elongation 300%-350% . Material 100% first generation silicone rubber. LENGTH AS REQUIRED. Tensile strength 12 MPa. Supplied in a roll. Color Multicolor. SIZE AS REQUIRED. Thickness AS REQUIRED. Usage/Application Industrial. We are the leading silicone rubber sheet manufacturer and supplier in India. We use high quality raw materials and new technologies to ensure superior durability. They are available in various colors, sizes, features and surface finishes. Our silicone rubber sheet is applied to various electrical and electronic insulating applications.

Country of Origin: Made in India. Use/Application Sound absorbers. material epdm. Black color. Dimensions: customized.

Used on the dam. Country of Origin: Made in India. Black color. Material: Rubber. Size: According to customer requirements. DAM Rabbit brand.

Black color. Tensile strength12 MPa. Supplied in a roll. The thickness is customizable. NBR material.

Set of dishes "Chamomile"

Mug "pineapple"

It’s well known that strengthening concrete with steel bars results in a combination stronger than either material alone. It’s also commonly understood that concrete’s high pH (alkalinity) normally provides protection for the steel against moisture-induced corrosion. Concrete’s high pH levels – typically pH 12-13 – will produce a thin oxide layer on the steel, preventing the reaction of the metal atoms. This thin zone is known as a passivity layer or film. It does not actually prevent corrosion, but greatly reduces it. This protective passivity layer can be destroyed, either by reduction of the alkalinity or by an increase in chloride ions. Alkalinity can be decreased by carbonation of the concrete. This is a very slow process, commonly seen as surface whitening in ageing structures. Chloride is the better-known cause of concrete corrosion and is a serious issue with marine structures. For reasons not fully understood, chloride ions will penetrate the passivity layer, leaving the steel vulnerable to corrosion. Significantly, only water-soluble ions have this effect. Key point 1: Reactive contaminants are carried to the steel by moisture. This is why minor cracking and micro-cracking in concrete, whether by movement, low cover shrinkage, or conditions such as ASR or DEF, is a very real threat. Key point 2: Minor cracks encourage the penetration of moisture vapour and moisture-borne contaminants. Here’s where PROTEX can help. The application of a penetrating catalytic hydrogel PROTEX can close the porosity and micro-cracking of the concrete, to a crack width of up to 0.5 mm, and to a treatment depth of up to 150mm! This depth of treatment ensures the rebar zone is encapsulated. Moisture, moisture vapour, and moisture-borne contaminants, are immobilised. This is a seriously effective treatment. By capturing the movement of moisture in the concrete, and particularly by treating the concrete early in the deterioration process, corrosion can be arrested or even totally prevented. If you are in charge of budgeting for the maintenance of a structure, you will see the significance of this at once. This treatment will help prevent major concrete decay and increase in the structure’s service life. Think of the savings in maintenance and replacement costs, Think of PROTEX.

Each mug is handmade at the Glassblowing Studio in Yekaterinburg! The perfect gift! Mug for cold drinks "Sköld" 0.5l glass. Ancient Vikings! Spirit of courage and courage! Alloy of will and valor! The flash of swords, the heat of fires, the fury of battle! Victory and Glory! From time immemorial, this imprint of a hand, accustomed to the hilt of a sword and to a victorious cup, is imprinted in a piece of molten glass! A real gift. A real hero! The mugs are handmade, so each one is unique!

ERMAMAT-QUARTZ LLC, operating under a license of the NV series number 0256 F5 dated 07/08/2020 for the extraction of crushed quartz. Crushed quartz sand is a raw material that is obtained by grinding natural quartz extracted from mountain deposits. Differs in purity and uniformity of structure, and also an uneven chipped form. After crushing, the material acquires such properties as high strength and abrasiveness. The composition of the raw material contains the maximum amount of silicon dioxide, as well as the minimum percentage presence of clay impurities. A large amount of silica and a minimum amount of impurities - all this determines the optimum resistance of the material to acids, as well as good refractory properties. Depending on the method of crushing and the subsequent purpose of the material, the grain size of crushed quartz can vary from 0.05 to 4 cm. APPLICATIONS OF QUARTZ SAND The use of quartz sand is practically unlimited. It is resistant to chemical, mechanical and atmospheric influences, and also has good fluidity. This material is used at: - production of dressing for roofing material; - decorative plaster; - production of refractory products; - steel production; - sprinkling of sports grounds and personal plots; - making molds for the foundry industry; - removal of metal corrosion; - production of enamels, varnishes and paints; - formation of a covering of floors of working rooms; - filtration of drinking water and industrial wastewater; - production of fine-grained concrete and polymer concrete; - manufacture of glass and fiberglass. LLC "ERMAMAT-QUARTZ" offers you its products according to the following characteristics: Crushed vein quartz of milky white color, Sio2 content of more than 99.5% corresponds to GOST 22551-77 grade VS - 050-2. Ready to use, cleaned, dried and packed in a 25kg bag. and 1000 tons.

Underfloor heating, everything for the kitchen, office and also at home I will not write in detail. You will find everything you need here.

Hello dear friend. We, Reef Industrial and Chemical Group, are the largest manufacturer of paints, waterproofing and insulation materials, resins, adhesives, finished products, glass beads and other basic chemical products in Iran and the Middle East. Our paints include water-based and solvent-based paints, hot and cold heat construction, industrial, automotive and road paints, matte, gloss and semi-gloss paints. Our production resins include all kinds of water-based and solvent-based, saddle and two-component industrial, construction, transportation, alkyd, polyester, thermoplastic and other types of resins according to customer's request. Our adhesives include various types of water-based adhesives, as well as industrial, construction and solvent-based adhesives for wood, stationery, footwear, concrete, carpet, parquet, PVC, polyurethane, crepe, etc. Our other products includes various basic chemicals. products such as aluminosilicate, prefabricated, glass beads and .... We offer you the best price and the highest quality all over the world.