Construction equipment in bulk on Qoovee

The 18V EC Brushless Cordless Rotary Hammer Kit with 2 Core 18V 4 Ah Advanced Power Batteries is a powerful and versatile tool designed for professional use in construction, demolition, and drilling applications. Here's a detailed overview of the product's features, advantages, and applications

SVP Peter Plast, made of first-class material, completely plastic SVP, not rubber, like many competitors, and also very affordable, considering the prices of competitors in terms of quality. Made from high-pressure propylene, due to this they tightly clamp the tiles and are easily knocked off.

Rubber sleeve keeps hands from getting cold or slip Don't use polishing pads bigger than 125 mm (5"). There is easy to cause damage to the tool. Front thumb-adjustable water knob enhances the tool control. No visible water tube and screw make a seamless smooth touch and no more break risk when dropping. Cast from aircraft aluminum. The watertight sealed bearings provide long life and smooth rotational speeds. The water and air controls are simple to use and conveniently located. Rear air vent removes exhaust through a hose protector, away from operator's hands. The tool is a powerful, reliable air tool ideally suited for continuous wet polishing in stone industry, and is safer when used wet! Detachable rotor and gear design brings you an economical repair   Specification: 1. Free Speed:4500 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:660L/min 5. Net Weight:1220g 6. Tool Length:235mm 7. Exhaust System: Front 8. Packing:10pcs/21kg/22kg/1.38'

Description: There are 2” or 3” kinds of PAD it’s useful for aperture smooth and grind. Long life, high speed. Light weight and trouble free. A durable yet economical choice offering longer life and higher speed to be suitable for process in vehicle body shop, mold and woodworking.   Specification: 1. Free Speed:15000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:600L/min 5. Net Weight:650g 6. Tool Length:160mm 7. Packing:20pcs/18kg/19kg/1.2'

Description: A lot of appurtenances to supply the various of sandpaper and burnishes for process. It was designed specially to use for a long time. Volume is small, the weight is light and the rotational speed is fast. There are three kind orbital diameter can choose.(0.75mm, 1.5mm, 3mm) It’s suitable for burnishes that cannot grind the detailed polish and useful for process in difficult reach area, mold and woodworking. Specification: 1. Free Speed:13000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:600L/min 5. Net Weight:815g 6. Tool Length:180mm 7. Packing:20pcs/21kg/22kg/1.2' 8. SM01N:Orbital Diameter:3mm 9. SM01NA:Orbital Diameter:1.5mm 10. SM01NB:Orbital Diameter:0.75mm

The giraffe sander DWS 225B in a case is an electric sander designed for sanding various types of surfaces. Mainly used for interior renovation and finishing work. Design features The working part of the Oxy DWS 225B machine is a replaceable grinding disc, which is driven by an electric motor. The device supports the installation of a disc with a diameter of up to 225mm, which is enough to perform most jobs related to grinding surfaces. The motor power is 850 W, the disk rotation speed is from 750 to 1850 rpm. The rotor speed can be set using a convenient electronic regulator on the handle of the device. The movable sanding head is mounted on a telescopic handle, the length of which can be adjusted between 110 and 180 cm. Thus, the Oxy DWS 225B sander is ideal for use in rooms with a standard ceiling height of around 3 meters.

Sicoma Mixer APM3000/2000, MPC3000/2000, Sicoma Concrete Mixer Wear Resistant Parts,Mixing Arms,Mixer Wear Plates,Mixer Blades,Mixer Liners,Professional Manufacturer,High Quality,Favorable Price

We sell SICOMA concrete mixer, professionally manufacture concrete plant mixer wear parts, SICOMA concrete mixer wear parts, BHS concrete mixer wear parts, shaft head seals, cement screw conveyor, crusher wear parts, custom size wear parts. >

We sell silcoma concrete mixer, professionally manufacture concrete mixing plant wear parts, SICOMA mixer wear parts, BHS mixer wear parts, shaft head seals, cement screw conveyor, crusher wear parts, custom size wear parts.

Automatic line for the production of bricks from the manufacturer (Cosmec). It is possible to supply a full-fledged turnkey plant, as well as individual units or components, in order to modernize your existing equipment. The composition of the line, the degree of automation and equipment may vary depending on the goals and objectives of the customer. The situation is similar with the pricing policy: the price of a line for the production of bricks can vary greatly. Therefore, when inquiring about the cost of equipment for the production of bricks, it is advisable to first take into account what your actual preferences are and whether the line meets your technical requirements (composition of the line, range of finished products, productivity, preparation of project documentation, installation supervision, degree of automation, etc. ) - only after that it is possible to set a preliminary price and real delivery times.

Equipment for the production of mineral wool, on the example of the basic model 30KA Automatic line for the production of high quality mineral wool from the manufacturer. The capacity of the recommended automatic lines varies from 8,000 tons to 60,000 tons of finished product per year or more. You can quickly contact a specialist to obtain the required information or send a request using the contact details provided on this portal. In addition to the standard supply of stone wool production equipment, the Company can provide a full range of services: from site selection, terrain layout, construction and building reference materials, equipment installation, commissioning, staff training, to the modernization of old stone (mineral) wool production lines. The cost and terms of delivery of a new automatic line for the production of stone wool, warranty obligations, as well as services for the maintenance or modernization of existing equipment are negotiated on an individual basis. At the same time, it should be borne in mind that the indicated cost is not decisive and in the process of discussing a commercial offer it can significantly (!) Change both up and down.

A mini-plant for the production of ceramic bricks is capable of not only producing high-quality bricks and / or tiles, but also has the ability to manufacture products with a significantly larger assortment than a large enterprise. The standard output is about 4 million bricks per year. This is an almost ideal option for developing a niche for the production of building materials while implementing original unique design solutions, as well as for filling the market with new and effective offers. For example, the described line is capable of producing both thin light partition blocks, and "American" (narrow brick), and facing tiles, and facing bricks with a textured surface. If you are interested in purchasing a mini-factory and you want to open the production of ceramic bricks and other building elements, use the following contact details of a specialist in charge of the CIS direction. Or, use the feedback form on the site. In order for your request not to fall into the basket and for it to receive the correct and really necessary answer, in this case, a commercial offer, we strongly recommend that you do the following and indicate in the appeal: The performance you require. Sizes of manufactured products, degree of hollowness (if necessary), strength, etc. The presence of a chemical analysis of raw materials that are planned to be used for the manufacture of products. Availability of main energy carriers and available capacities (gas, water, electricity, etc.). Address of the location and installation of the line. For whom the commercial offer should be prepared: private person (full name), organization (name).

Manufacture of sandwich panels on the example of the universal line JF100. Delivery of equipment is carried out directly from the manufacturer from China. Terms of design, installation, staff training and warranty service are negotiated on an individual basis. The considered line is offered only as a sample. In each case, productivity, quality requirements for products, range of products, degree of automation, etc. are determined based on the needs of the customer. The information is provided by a direct certified supplier authorized to act on behalf of the manufacturer in Russia and the CIS countries - HEBEI SUOFU TRADING CO., LTD. Different from the production of standard sandwich panels, the main purpose of the JF100 line is to produce a new type of sandwich panel, namely, rock wool polyurethane composite board with improved functions of fire resistance, heat preservation, thermal insulation, sound insulation, waterproof, lightness and environmental protection. The production of a new generation of sandwich panels from mineral wool and polyurethane combines the reaction technology of machine, electrical, liquid and chemical polymerization of polyurethane with mineral wool and is a fully automatic continuous production line.

Concrete batching plant is a combined plant, concrete BSU plant, used for centralized mixing of concrete, also called concrete pretreatment plant. It is highly mechanized, automated concrete batching plant and productive, guarantees the quality and output of concrete products, saves raw material and cost. Large concrete batching plants are often used for large and medium-sized water conservancy construction, power plant construction, bridge building, etc., where the concrete workload is large, the duration of work is long, and the sites are concentrated. Of course, for smaller projects, such as building houses in towns and cities, small factories, etc., you can also choose a small to medium-sized concrete plant with a smaller capacity. We have many models and configurations of concrete mixing plants, let us know your requirements and budget and we can find the most suitable concrete mixing plant for you. With the development of municipal construction becoming more and more mature, using centralized mixing and providing commercial concrete mixing plants is a great advantage, so commercial concrete mixing plants are also an investment for most customers. Commercial concrete mixing plants also create a great social environment to promote the construction of concrete pumps and the joint operation of machines for mixing, transporting and laying. All the construction parts described above are available from AIMIX!

Xsmart automatic dispenser.

Paint brush MAKLOVITSA

Tray for paint

Paint roller FOR WOODWORK

Paint roller FACADE WORKS

Paint roller for work with WATER PAINTS

Paint roller for work with VARNISHES

Paint roller MASTER for work with enamels

Paint brush "Lucky"

Paint brush "Enamels"

Woodwork brush

The production of paint brushes is one of the main activities of AKOR. Remaining a recognized leader in the brush market for many years, AKOR has accumulated vast experience in the development and creation of the highest level painting tools that are not inferior to the best world analogues either in quality or in the variety of assortment.

Used on the dam. Country of Origin: Made in India. Black color. Material: Rubber. Size: According to customer requirements. DAM Rabbit brand.

Black color. Tensile strength12 MPa. Supplied in a roll. The thickness is customizable. NBR material.

DEAERING ROLLERS

“SA International” - Shanghai Asia International Electrical & Mechanical Co., LTDispart of theSIBC Group, which has been providing equipment and technology selection services in various fields since 2017.   -   Construction.- Road construction.- Metallurgy.- Mining.- Chemical industry.- Production lines for various purposes.   We are trusted by clients in Europe, USA, Canada, Malaysia, India, South Korea, Russia, Thailand. The company " SA International " has an official representative office on the territory of the Russian Federation, in the city of Krasnodar to simplify cooperation, document circulation and customs clearance for our clients. Cooperating with our company, you can be confident not only in the quality of the supplied equipment, but also in the after-sales service.    We provide:   - Machinery and equipment for the construction industry, such as:Asphalt concrete plants / plants (ABZ), concrete mixing plants / plants (BRU / RBU), self-propelled concrete mixers with self-loading function, concrete pumps, lines for the production of tiles and blocks, etc.   - Equipment for mining: crushers, screens, screens, conveyor belts, pumps, etc.   - Alligator scissors and metal presses.   - Cargo and wheeled vehicles: loaders, excavators, bulldozers.   - Storage equipment.   - DES and electric motors.   - Chemical reagents and components.   Also, "SA International" is a manufacturer of conveyor belts.   Over the years of working with factories in China, we have earned a reputation as a reliable partner and a center of excellence for quality assessment among our customers. Our managers will conduct a full market assessment, advise you on all emerging issues, provide complete information as soon as possible, and engineers will monitor the entire production process to minimize the percentage of defects and will train your staff.   An additional advantage of working with us will be that the managers of "SA International" know all the logistics processes, offer competitive prices and the shortest delivery times.

We specialize in exporting brand new Engraving Machines, CNC machine, milling machine and laser machine to any country of the world. We supply best of quality Engraving Machines, CNC machine, milling machine and laser machine including major models from best brand makers. Currently we offer best products and brands from: roland, SISMA and many mores! Please visit our site or contact us for check our product available. World Wide Shipment Service Available!

Description The size of the decorative panel: 200 * 111 mm. In the package: 29 pcs. Total area in the package: 0.35 sq. _________________________________________________________________________________________________________                      Laying surface All surfaces must comply with the general technical requirements and, taking into account the current regulations, be suitable for installation. - the norm of moisture content for supporting slabs is 4%, for cement-sand pavements - 5%, for plank bases - no more than 7%; -hardness / bearing capacity; -smoothness (maximum difference in surface level per meter, no more than 3 mm) - cleanliness of the surface for laying (remove dust, grease and mat if the surface is varnished) Walls or ceilings made of PVC, plasterboard, plastered surfaces, surfaces covered with any kind of wallpaper, painted surfaces, surfaces made of wood or rubber, if they meet the above conditions, can also serve as a surface for laying. Unsuitable substrates are textile surfaces. Basic rules for laying For installation, adhesives with the best adhesion and adhesive properties of wood are used with the surface on which the wall panel will be laid. We recommend using quick-drying elastic polyurethane-based adhesives that resist vibration and corrosion. When using glue of PUR classification (PUR), it is worth choosing those that do not foam when drying, in order to exclude the possibility of lagging of the part of the wall panel from the surface. We recommend using pur-glue sealant KLEIBERIT 566 PUR   supracraft . -Before laying, the details of the wall panels should be checked for possible visible defects (great attention should be paid to the size of the parts, they should all be identical). Natural wood defects (knots and defects in wood structure) are NOT a defect. It is forbidden to lay damaged parts of the wall panels. -for installation of wall panels you will need: tape measure, pencil, glue (depending on the type of installation, you may need a saw) -determine and measure the coverage area before laying. Keep in mind that for 1 linear meter of laying, the offset towards laying is approximately 1-2 mm. -Start laying from the corner, lay out the first row as evenly as possible horizontally. Pay attention to the laying lines, observe horizontal and vertical lines. - laying is done by applying a small amount of glue to the part of the wall panel (so that when pressing on the part, the glue does not climb over its edges) and mounting it on the surface with slight pressure. You need to lay without seams, aligning the corners of the parts exactly to each other tightly and without gaps. - fixing parts of the wall panel with screws and nails is not allowed Installation in public and commercial premises. When installing in public and commercial premises, the average humidity levels typical of such premises should be taken into account. At the same time, it recommends applying more glue to exclude the possibility of detaching the part from the surface. It is also recommended to leave a small expansion gap of 0.1-0.2 mm between the parts. After styling -wipe the wall panel not with a wet, but only with a slightly damp cloth. - If liquid is spilled on the wall panel, it should be cleaned immediately. - do not use abrasive cleaning agents and other agents that can damage the coating by friction. -do not coat the surface of the wall panel with wax or varnish - it is allowed to use dry vacuum cleaners -use of vacuum cleaners for wet cleaning (washing vacuum cleaners) and steam cleaners is NOT allowed. - it is not allowed to use cleaners and cleaning agents that form foam (dishwashing detergent, liquid soap, etc.). Also, do not use alcohol or vinegar based floor cleaners. -If damage is found, small damaged areas can be repaired with a specially designed molding oil of the color you need. To purchase the oil you need, you must contact the manufacturer.

Description Decorative panel size: 180 * 70 mm.In the package: 28 pcs.Total area in the package: 0.35 sq. _________________________________________________________________________________________________________                      Laying surface All surfaces must comply with the general technical requirements and, taking into account the current regulations, be suitable for installation. - the norm of moisture content for supporting slabs is 4%, for cement-sand pavements - 5%, for plank bases - no more than 7%; -hardness / bearing capacity; -smoothness (maximum difference in surface level per meter, no more than 3 mm) - cleanliness of the surface for laying (remove dust, grease and mat if the surface is varnished) Walls or ceilings made of PVC, plasterboard, plastered surfaces, surfaces covered with any kind of wallpaper, painted surfaces, surfaces made of wood or rubber, if they meet the above conditions, can also serve as a surface for laying. Unsuitable substrates are textile surfaces. Basic rules for laying For installation, adhesives with the best adhesion and adhesive properties of wood are used with the surface on which the wall panel will be laid. We recommend using quick-drying elastic polyurethane-based adhesives that resist vibration and corrosion. When using glue of PUR classification (PUR), it is worth choosing those that do not foam when drying, in order to exclude the possibility of lagging of the part of the wall panel from the surface. We recommend using pur-glue sealant KLEIBERIT 566 PUR   supracraft . -Before laying, the details of the wall panels should be checked for possible visible defects (great attention should be paid to the size of the parts, they should all be identical). Natural wood defects (knots and defects in wood structure) are NOT a defect. It is forbidden to lay damaged parts of the wall panels. -for installation of wall panels you will need: tape measure, pencil, glue (depending on the type of installation, you may need a saw) -determine and measure the coverage area before laying. Keep in mind that for 1 linear meter of laying, the offset towards laying is approximately 1-2 mm. -Start laying from the corner, lay out the first row as evenly as possible horizontally. Pay attention to the laying lines, observe horizontal and vertical lines. - laying is done by applying a small amount of glue to the part of the wall panel (so that when pressing on the part, the glue does not climb over its edges) and mounting it on the surface with slight pressure. You need to lay without seams, aligning the corners of the parts exactly to each other tightly and without gaps. - fixing parts of the wall panel with screws and nails is not allowed Installation in public and commercial premises. When installing in public and commercial premises, the average humidity levels typical of such premises should be taken into account. At the same time, it recommends applying more glue to exclude the possibility of detaching the part from the surface. It is also recommended to leave a small expansion gap of 0.1-0.2 mm between the parts. After styling -wipe the wall panel not with a wet, but only with a slightly damp cloth. - If liquid is spilled on the wall panel, it should be cleaned immediately. - do not use abrasive cleaning agents and other agents that can damage the coating by friction. -do not coat the surface of the wall panel with wax or varnish - it is allowed to use dry vacuum cleaners -use of vacuum cleaners for wet cleaning (washing vacuum cleaners) and steam cleaners is NOT allowed. - it is not allowed to use cleaners and cleaning agents that form foam (dishwashing detergent, liquid soap, etc.). Also, do not use alcohol or vinegar based floor cleaners. -If damage is found, small damaged areas can be repaired with a specially designed molding oil of the color you need. To purchase the oil you need, you must contact the manufacturer.

Description Decorative panel size: 205 * 118 mm. In the package: 22 pcs. Total area in the package: 0.35 sq. _________________________________________________________________________________________________________ Laying surface All surfaces must comply with the general technical requirements and, taking into account the current regulations, be suitable for installation. - the norm of moisture content for supporting slabs is 4%, for cement-sand pavements - 5%, for plank bases - no more than 7%; -hardness / bearing capacity; -smoothness (maximum difference in surface level per meter, no more than 3 mm) - cleanliness of the surface for laying (remove dust, grease and mat if the surface is varnished) Walls or ceilings made of PVC, plasterboard, plastered surfaces, surfaces covered with any kind of wallpaper, painted surfaces, surfaces made of wood or rubber, if they meet the above conditions, can also serve as a surface for laying. Unsuitable substrates are textile surfaces. Basic rules for laying For installation, adhesives with the best adhesion and adhesive properties of wood are used with the surface on which the wall panel will be laid. We recommend using quick-drying elastic polyurethane-based adhesives that resist vibration and corrosion. When using glue of PUR classification (PUR), it is worth choosing those that do not foam when drying, in order to exclude the possibility of lagging of the part of the wall panel from the surface. We recommend using KLEIBERIT 566 PUR supracraft pur-glue sealant. -Before laying, the details of the wall panels should be checked for possible visible defects (great attention should be paid to the size of the parts, they should all be identical). Natural wood defects (knots and defects in wood structure) are NOT a defect. It is forbidden to lay damaged parts of the wall panels. -for installation of wall panels you will need: tape measure, pencil, glue (depending on the type of installation, you may need a saw) -determine and measure the coverage area before laying. Keep in mind that for 1 linear meter of laying, the offset towards laying is approximately 1-2 mm. -Start laying from the corner, lay out the first row as evenly as possible horizontally. Pay attention to the laying lines, observe horizontal and vertical lines. - laying is done by applying a small amount of glue to the part of the wall panel (so that when pressing on the part, the glue does not climb over its edges) and mounting it on the surface with slight pressure. You need to lay without seams, aligning the corners of the parts exactly to each other tightly and without gaps. - fixing parts of the wall panel with screws and nails is not allowed Installation in public and commercial premises. When installing in public and commercial premises, the average humidity levels typical of such premises should be taken into account. At the same time, it recommends applying more glue to exclude the possibility of detaching the part from the surface. It is also recommended to leave a small expansion gap of 0.1-0.2 mm between the parts. After styling -wipe the wall panel not with a wet, but only with a slightly damp cloth. - If liquid is spilled on the wall panel, it should be cleaned immediately. - do not use abrasive cleaning agents and other agents that can damage the coating by friction. -do not coat the surface of the wall panel with wax or varnish - it is allowed to use dry vacuum cleaners -use of vacuum cleaners for wet cleaning (washing vacuum cleaners) and steam cleaners is NOT allowed. - it is not allowed to use cleaners and cleaning agents that form foam (dishwashing detergent, liquid soap, etc.). Also, do not use alcohol or vinegar based floor cleaners. -If damage is found, small damaged areas can be repaired with a specially designed molding oil of the color you need. To purchase the oil you need, you must contact the manufacturer.

Description Decorative panel size: 185 * 160 mm.In the package: 16 pcs.Total area in the package: 0.35 sq. _________________________________________________________________________________________________________                      Laying surface All surfaces must comply with the general technical requirements and, taking into account the current regulations, be suitable for installation. - the norm of moisture content for supporting slabs is 4%, for cement-sand pavements - 5%, for plank bases - no more than 7%; -hardness / bearing capacity; -smoothness (maximum difference in surface level per meter, no more than 3 mm) - cleanliness of the surface for laying (remove dust, grease and mat if the surface is varnished) Walls or ceilings made of PVC, plasterboard, plastered surfaces, surfaces covered with any kind of wallpaper, painted surfaces, surfaces made of wood or rubber, if they meet the above conditions, can also serve as a surface for laying. Unsuitable substrates are textile surfaces. Basic rules for laying For installation, adhesives with the best adhesion and adhesive properties of wood are used with the surface on which the wall panel will be laid. We recommend using quick-drying elastic polyurethane-based adhesives that resist vibration and corrosion. When using glue of PUR classification (PUR), it is worth choosing those that do not foam when drying, in order to exclude the possibility of lagging of the part of the wall panel from the surface. We recommend using pur-glue sealant KLEIBERIT 566 PUR   supracraft . -Before laying, the details of the wall panels should be checked for possible visible defects (great attention should be paid to the size of the parts, they should all be identical). Natural wood defects (knots and defects in wood structure) are NOT a defect. It is forbidden to lay damaged parts of the wall panels. -for installation of wall panels you will need: tape measure, pencil, glue (depending on the type of installation, you may need a saw) -determine and measure the coverage area before laying. Keep in mind that for 1 linear meter of laying, the offset towards laying is approximately 1-2 mm. -Start laying from the corner, lay out the first row as evenly as possible horizontally. Pay attention to the laying lines, observe horizontal and vertical lines. - laying is done by applying a small amount of glue to the part of the wall panel (so that when pressing on the part, the glue does not climb over its edges) and mounting it on the surface with slight pressure. You need to lay without seams, aligning the corners of the parts exactly to each other tightly and without gaps. - fixing parts of the wall panel with screws and nails is not allowed Installation in public and commercial premises. When installing in public and commercial premises, the average humidity levels typical of such premises should be taken into account. At the same time, it recommends applying more glue to exclude the possibility of detaching the part from the surface. It is also recommended to leave a small expansion gap of 0.1-0.2 mm between the parts. After styling -wipe the wall panel not with a wet, but only with a slightly damp cloth. - If liquid is spilled on the wall panel, it should be cleaned immediately. - do not use abrasive cleaning agents and other agents that can damage the coating by friction. -do not coat the surface of the wall panel with wax or varnish - it is allowed to use dry vacuum cleaners -use of vacuum cleaners for wet cleaning (washing vacuum cleaners) and steam cleaners is NOT allowed. - it is not allowed to use cleaners and cleaning agents that form foam (dishwashing detergent, liquid soap, etc.). Also, do not use alcohol or vinegar based floor cleaners. -If damage is found, small damaged areas can be repaired with a specially designed molding oil of the color you need. To purchase the oil you need, you must contact the manufacturer.

Description Decorative panel size: 140 * 120 mm.In the package: 42 pcs.Total area in the package: 0.35 sq. _________________________________________________________________________________________________________                      Laying surface All surfaces must comply with the general technical requirements and, taking into account the current regulations, be suitable for installation. - the norm of moisture content for supporting slabs is 4%, for cement-sand pavements - 5%, for plank bases - no more than 7%; -hardness / bearing capacity; -smoothness (maximum difference in surface level per meter, no more than 3 mm) - cleanliness of the surface for laying (remove dust, grease and mat if the surface is varnished) Walls or ceilings made of PVC, plasterboard, plastered surfaces, surfaces covered with any kind of wallpaper, painted surfaces, surfaces made of wood or rubber, if they meet the above conditions, can also serve as a surface for laying. Unsuitable substrates are textile surfaces. Basic rules for laying For installation, adhesives with the best adhesion and adhesive properties of wood are used with the surface on which the wall panel will be laid. We recommend using quick-drying elastic polyurethane-based adhesives that resist vibration and corrosion. When using glue of PUR classification (PUR), it is worth choosing those that do not foam when drying, in order to exclude the possibility of lagging of the part of the wall panel from the surface. We recommend using pur-glue sealant KLEIBERIT 566 PUR   supracraft . -Before laying, the details of the wall panels should be checked for possible visible defects (great attention should be paid to the size of the parts, they should all be identical). Natural wood defects (knots and defects in wood structure) are NOT a defect. It is forbidden to lay damaged parts of the wall panels. -for installation of wall panels you will need: tape measure, pencil, glue (depending on the type of installation, you may need a saw) -determine and measure the coverage area before laying. Keep in mind that for 1 linear meter of laying, the offset towards laying is approximately 1-2 mm. -Start laying from the corner, lay out the first row as evenly as possible horizontally. Pay attention to the laying lines, observe horizontal and vertical lines. - laying is done by applying a small amount of glue to the part of the wall panel (so that when pressing on the part, the glue does not climb over its edges) and mounting it on the surface with slight pressure. You need to lay without seams, aligning the corners of the parts exactly to each other tightly and without gaps. - fixing parts of the wall panel with screws and nails is not allowed Installation in public and commercial premises. When installing in public and commercial premises, the average humidity levels typical of such premises should be taken into account. At the same time, it recommends applying more glue to exclude the possibility of detaching the part from the surface. It is also recommended to leave a small expansion gap of 0.1-0.2 mm between the parts. After styling -wipe the wall panel not with a wet, but only with a slightly damp cloth. - If liquid is spilled on the wall panel, it should be cleaned immediately. - do not use abrasive cleaning agents and other agents that can damage the coating by friction. -do not coat the surface of the wall panel with wax or varnish - it is allowed to use dry vacuum cleaners -use of vacuum cleaners for wet cleaning (washing vacuum cleaners) and steam cleaners is NOT allowed. - it is not allowed to use cleaners and cleaning agents that form foam (dishwashing detergent, liquid soap, etc.). Also, do not use alcohol or vinegar based floor cleaners. -If damage is found, small damaged areas can be repaired with a specially designed molding oil of the color you need. To purchase the oil you need, you must contact the manufacturer.

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training   With a stationary machine SUMAB R-1500 you can produce the following products: Empty blocks Curbstones Paving stone Tiled stone Capacity (per shift): Paving stone (10x20x6 cm) – 2000-2600 m2 Hollow block (20x20x40 cm) – 23000 pieces Curbstone – 2800-4000 pieces depending on the size of the curbstones, without or with face mix. Pallet size max: 1400x1100 mm. Useful area max: 1300x1050 mm. If you choose the fully automatic block machine, you will receive an Internet modem as a gift!

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training The plant is designed on a container frame.4 aggregate storages,Planetary mixer 1800/1200 liters.Additive pump, high pressure compressor.Computer Siemens (100 concrete sorts).Concrete plants SUMAB are a guarantee of quality, durability and reliability. Batching plant is produced by Scandinavian technology, using components from the leading European manufacturers! Scandinavian quality at the best price!If you need more information, you can visit our website, or send a request. We will necessarily find the best solution for you!

*All of our products are made with care and covered with 2 years warranty! *Fast installation and FREE operator training     Mobile concrete plant SUMAB MINI designed on long legs. Does not require the installation of a conveyor belt! This allows you to save on purchasing a conveyor belt and place the plant on a small site or indoors, without losing productivity & quality.  Main technical data: - 2 aggregate storages; - planetary mixer 560/375 liters; - water tank 200 liters; - automatic control of a plant: computer (20 concrete receipts).