TECHNOPLAT CS / CW AUTOMATIC PALLET WRAPPERS - 45245

FLOWMATE Food Grade Pump Water Pump Diaphragm Pump KDP-14 series 12V/24V DC Pump Electric Pump Permanent Magnet Brush/brushless Motor Assemblied Open Flow 1-2LPM Designed for General Purpose Water Dispenser Coffee Machine Auto Vending Machine Portable Electric Sprayer etc.   Product label: FLOWMATE, KDP-14, Pump, Water Pump, Diaphragm Pump, Membrane Pump, Mini Pump, Micro Pump, DC Pump, DC Water Pump, DC Diaphragm Pump, DC Membrane Pump, Mini Water Pump, Mini Diaphragm Pump, Mini Membrane Pump, Micro Water Pump, Micro Diaphragm Pump, Micro Membrane Pump, Electric Pump, Electric Water Pump, Electric Diaphragm Pump, Electric Membrane Pump, Brush Pump, Brushless Pump, Food Grade Pump, Water Dispenser Pump, Water System Pump, Coffee Machine Pump, Vending Machine Pump, Ice Maker Pump, Agriculture pump, Electric Sprayer Pump,  Self-priming pump, micro self-priming pump, mini self-priming pump, self-priming water pump, self-priming diaphragm pump   Diaphragm Pumps are used extensively in many industries and can handle a very wide variety of liquids. Diaphragm Pumps are in the category of "positive displacement" pumps because their flowrates do not vary much with the discharge "head" (or pressure) the pump is working against (for a given pump speed). Diaphragm Pumps can transfer liquids with low, medium or high viscosities and also liquids with a large solids content. They can also handle many aggressive chemicals such as acids because they can be constructed with a wide variety of body materials and diaphragms   Features 1. Food grade2. Small size and easy installation3. Low noise with smooth running4. Self-priming with dry suction 1-2.5 meters5. Dry run without damage6. Long life permanent magnet DC brush motor7. Varible hosing port can be customized 8. Explosion proof design for flammable refrigerants9. Handling cold water and hot water 0-100℃   Applications 1. Water dispenser 2. Coffee machine 3. Vending machine 4. Ice maker 5. Tea table water dispensing 6. Integrated stove 7. Medical equipment 8. Chemical instrument 9. Electric sprayer 10. Wine taker 11. Water purifier/filtration   Specifications Model Hosing Port Rated Volts (VDC) Rated Amps (A) Open Flow (L/min) Noise 30CM (dB) Dry Suction (m) Head (m) Output Pressure (MPA) Weight (KG) Duty Cycle KDP-14 Φ1/4"(6.5mm) OD Pipe 12 0.2 0.8±0.2 43 1.0/1.8 2 0.08 (10PSI) 0.25 Intermittent 12/24 0.3/0.15 1.0± 0.2 45 1.2/2.0 5 0.15 (20PSI) 0.25 Intermittent 12/24 0.4/0.2 1.2± 0.2 48 1.5/2.5 7 0.2 (30PSI) 0.25 Intermittent 12/24 0.5/0.3 1.4± 0.2 50 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.6/0.35 1.6± 0.2 52 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.7/0.4 1.8± 0.2 54 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.8/0.5 2.0± 0.2 56 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 1.0/0.6 2.3± 0.3 58 1.5 10 0.3 (45PSI) 0.25 Intermittent Tested with clean water at 25℃。   Wetted Parts Material Construction Pump housing - PP/PP+20%GF Pump covers - PP/PP+20%GF Diaphragms - Silicone/EPDM/VITON/Santoprene TPV Check valve sealings - Silicone/EPDM/VITON   Performance Curve   Dimension Drawings  

SOVOFLO Food Grade Pump Water Pump Diaphragm Pump KDP-14B series 12V/24V DC Pump Electric Pump Permanent Magnet Brush/brushless Motor Assemblied Open Flow 1-2LPM Designed for General Purpose: Water Dispenser Coffee Machine Auto Vending Machine Portable Electric Sprayer etc.   Product label: FLOWMATE, KDP-14B, Pump, Water Pump, Diaphragm Pump, Membrane Pump, Mini Pump, Micro Pump, DC Pump, DC Water Pump, DC Diaphragm Pump, DC Membrane Pump, Mini Water Pump, Mini Diaphragm Pump, Mini Membrane Pump, Micro Water Pump, Micro Diaphragm Pump, Micro Membrane Pump, Electric Pump, Electric Water Pump, Electric Diaphragm Pump, Electric Membrane Pump, Brush Pump, Brushless Pump, Food Grade Pump, Water Dispenser Pump, Water System Pump, Coffee Machine Pump, Vending Machine Pump, Ice Maker Pump, Agriculture pump, Electric Sprayer Pump,  Self-priming pump, micro self-priming pump, mini self-priming pump, self-priming water pump, self-priming diaphragm pump   Diaphragm Pumps are used extensively in many industries and can handle a very wide variety of liquids. Diaphragm Pumps are in the category of "positive displacement" pumps because their flowrates do not vary much with the discharge "head" (or pressure) the pump is working against (for a given pump speed). Diaphragm Pumps can transfer liquids with low, medium or high viscosities and also liquids with a large solids content. They can also handle many aggressive chemicals such as acids because they can be constructed with a wide variety of body materials and diaphragms   Features 1. Food grade2. Small size and easy installation3. Low noise with smooth running4. Self-priming with dry suction 1-2.5 meters5. Dry run without damage6. Long life permanent magnet DC brush motor7. Varible hosing port can be customized 8. Handling cold water and hot water 0-100℃   Applications 1. Water dispenser 2. Coffee machine 3. Vending machine 4. Ice maker 5. Tea table water dispensing 6. Integrated stove 7. Medical equipment 8. Chemical instrument 9. Electric sprayer 10. Wine taker 11. Water purifier/filtration   Specifications Model Hosing Port Rated Volts (VDC) Rated Amps (A) Open Flow (L/min) Noise 30CM (dB) Dry Suction (m) Head (m) Output Pressure (MPA) Weight (KG) Duty Cycle KDP-14B Φ1/4"(6.5mm) OD Pipe 12 0.2 0.8±0.2 43 1.0/1.8 2 0.08 (10PSI) 0.25 Intermittent 12/24 0.3/0.15 1.0± 0.2 45 1.2/2.0 5 0.15 (20PSI) 0.25 Intermittent 12/24 0.4/0.2 1.2± 0.2 48 1.5/2.5 7 0.2 (30PSI) 0.25 Intermittent 12/24 0.5/0.3 1.4± 0.2 50 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.6/0.35 1.6± 0.2 52 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.7/0.4 1.8± 0.2 54 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.8/0.5 2.0± 0.2 56 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 1.0/0.6 2.3± 0.3 58 1.5 10 0.3 (45PSI) 0.25 Intermittent Tested with clean water at 25℃。   Wetted Parts Material Construction Pump housing - PP/PP+20%GF Pump covers - PP/PP+20%GF Diaphragms - Silicone/EPDM/VITON/Santoprene TPV Check valve sealings - Silicone/EPDM/VITON   Performance Curve   Dimension Drawings

The FLO machine is a heat-shrinkable machine with side seam formation, available at the warehouse in Nizhny Novgorod. It is universal, flexible in operation - it allows you to quickly change from size to size. The machine is automatic, setting is carried out from the control panel. Suitable for both small and medium-sized products and goods. Rearranges the film cut lengthwise. Focused on saving film. Works with polyolefin and polyethylene films. Technical characteristics of the packaging machine Manufacturer - DM Pack (Italy) Packing speed - up to 40 packages per minute Types of film: polyolefin, polyethylene Sealing size - 500x650 mm Maximum product width - 420 mm Maximum product length - 600 mm Maximum product height - up to 200 mm Width films – 650 mm Features of the FLO packaging machine L-shaped sealing bar. The block is lowered in captivity when sealed with the entire surface at the same time (there is no “scissors” effect). The sealing bar is only 10 mm wide and ensures high seam quality and film savings. Sliding doors. Seam centering system in the machine base. Easy cleaning and maintenance, easy change of conveyors. Perforators for piercing film. Touch panel with convenient control program. Roll-out cart for film roll. Sign up for test packaging of your products via messages or by phone number. Automate your packaging workshop today!

Offer: Strapping table TP-201 is a reliable semi-automatic strapping machine. • Provides lock-free fastening of polypropylene tape • No need to reconfigure the table when changing the size of the packaged object • Particularly suitable for packing packages, boxes, sacks that are impossible or difficult to tie using hand tools Operating principle: the tape is thrown out to a given length; the item to be packed is placed on the table; the operator manually circles the packaged item with the free end of the tape and inserts it into the receiving hole in the table; The device automatically tensions, welds and cuts the tape. Technical characteristics • Strapping speed 2.5 sec/turn. • Tape width 6…15.5 mm • Mechanical tape tension force control • Tape tension force max 45 kg • Package size: min 120 x 30 mm, max unlimited • Supply voltage 220 V (50 Hz) • Power 200 W • Internal tape reel diameter 200/230/280 mm • Weight 100 kg • Overall dimensions 910 x 582 x 785 mm. Country of origin: Taiwan PS. P/P tape (strapping) strapping 12*0.8mm. blue color, length 1.8 km. It welds well together even at low temperatures, Price = 150,000 rubles, indicated with VAT and loading from a warehouse in Vladivostok. I will be happy to answer your questions. We will assist in shipping to your warehouse. R/S Offer: soldering element for soldering strapping tape to “TR-201”, price = 19,200 rub. We hope for your interest in our offer, we will be very glad to cooperate.

Main parameters: Load capacity: 100 kg / 150 kg / 250 kg / 350 kg / 550 kg / 750 kg Coverage radius: up to 4500 mm Lifting height: up to 2000 mm Control system options: Automatic adjustment of load weight loss - ShBM-PP-A (only for lifting capacity up to 350 kg) Manual adjustment of load weight loss - ShBM-PP-R Execution options: Floor-standing (on a column) Suspended (on crane tracks) Installation options (for floor-standing version): Base for stationary fastening to the floor Driven trolley (for fastenings on crane tracks) Platform for moving by forklift Folding support legs

The Gruzopodyem plant produces high-strength steel traverses for various types of cargo in accordance with TU-3178-004-87879481-2010, in accordance with the requirements of TR TS 010/2011. The devices are designed for lifting and transporting loads of any type, however, they are more often used when working with complex ones: large-tonnage, long-length, non-standard and with a displaced center of gravity. Additional attachments allow you to grab the load evenly and prevent the slings from twisting and bending. With restrictions on the lifting height or reach of the crane boom, it allows you to lift the object to the maximum height. The type of traverse is selected based on the design of the lifted product: Linear - have the highest load capacity of 1000.0 tons. As a rule, they are used for voluminous and long items up to 12 meters. They are a beam with fastening at the center or edges. Spatial - withstand loads up to 200.0 tons. Designed for bulky cargo of non-standard shape, no larger than 25x5 m. They are rectangular and H-shaped with fastenings along the edges and behind the center. For containers - a specialized type of device adapted to the tasks of cargo terminals. They are divided into frame and linear, lift up to 30 tons. For pipes and towels - designed for the oil and gas industry. Are applied to transportation of any cylindrical products. We offer you in our person a reliable partner, from cooperation with which you get: Optimal prices for products, as you contact the manufacturer directly Deliveries exactly on time Goods with guaranteed quality Professional advice Possibility of manufacturing equipment to order Installation services Delivery services Possibility to purchase equipment in leasing Opportunity to insure cargo during its transportation.

Plant "Gruzopodyem" manufactures industrial tilters for overturning and rotation around its axis of large, long and cylindrical loads. These devices forcibly and purposefully shift the center of gravity of the load. They significantly speed up production processes at enterprises, as well as increase the degree of work safety. They are used in warehouses, construction sites, machine-building plants and metalworking enterprises. In a basic complete set are calculated on work at a temperature from -20 °C to +40 °C. The type of tilter is selected based on the tasks of production: Suspended — used for tilting any hard materials. Fixed on racks, or associated with lifting equipment. The device consists of a traverse, rollers and slings. According to the type of control, they are divided into manual, manual with a gearbox and electric. The latter have the highest carrying capacity of 80 tons. Stationary - used to rotate pipes and I-beams during welding. Consist of two or more sections, depending on the length of the load. Withstand up to 80 tons. Supplied with electric drive only. For rolls, they overturn any cylindrical loads weighing from 1.5 tons at an angle of 90 degrees: coils of wire, rolls of steel, paper. They belong to a stationary type of equipment, driven by a hydraulic or electric type of drive. We produce according to TU-3178-005-87879481-2010 in accordance with the requirements of the Technical Regulations of the Customs Union 010/2011 "On the safety of machinery and equipment". We offer you in our person a reliable partner, from cooperation with which you get: Optimal prices for products, as you contact the manufacturer directly Deliveries exactly on time Goods with guaranteed quality Professional advice Possibility of manufacturing equipment to order Installation services Delivery services Possibility to purchase equipment in leasing Opportunity to insure cargo during its transportation.

We produce transport trolleys on rails and wheels according to TU 28.22.18-017-87879481-2020 with dimensions not exceeding LxW of 6.0x3.5 meters. Self-propelled transfer platforms allow you to move any cargo weighing up to 80 tons between work areas. They are used in warehouses, metallurgical industries, reinforced concrete plants and in other industries where it is necessary to move cargo. Virtually no restrictions in terms of use and does not require additional equipment for operation. Unlike stationary lifting equipment at the enterprise, they can connect not only work areas within the workshop, but also move between them. Types of manufactured bogies: On rails - move only on rails. As a rule, the path for them is laid in a straight line, without turns, however, they can also pass along a curved segment. Equally used both indoors and outdoors. In the basic version, the operating temperature is calculated from -20°C to +40°C. The drive type can be manual or electric. On wheels - they are performed only with an electric type of travel and in category U3, that is, for indoor operation. Able to move on a flat floor, in the direction of "back and forth". Special - with lifting table or built-in welding rotator. Transfer platforms can be manufactured in general industrial and fireproof versions. Upon request, we supply with additional options: radio control, soft start, protective coatings, devices for securing cargo and others. We offer you in our person a reliable partner, from cooperation with which you get: Optimal prices for products, as you contact the manufacturer directly Deliveries exactly on time Goods with guaranteed quality Professional advice Possibility of manufacturing equipment to order Installation services Delivery services Possibility to purchase equipment in leasing Opportunity to insure cargo during its transportation.

The Gruzopodyem plant develops and manufactures crane runways and overpasses according to individual projects - according to the drawings of the customer or our own design bureau. Our company is a member of the SRO for the design of capital construction facilities, as well as a SRO for the construction, reconstruction and overhaul of capital construction facilities, which allows us not only to manufacture equipment, but also to design it, as well as to carry out installation at the Customer's site. Thus, we carry out a full range of works: we design, manufacture, deliver and install crane runways and overpasses. The product warranty is up to 24 months. Crane tracks are designed for overhead movement of overhead and support cranes in production shops, warehouses, transport hubs and construction sites, both indoors and outdoors. Crane tracks are installed on load-bearing columns, walls, floors of the building. Supports of this type allow you to combine several sections into a single assembly line and do not occupy the usable area of the enterprise. Overpasses are a completely independent structure with its own foundation, which allows you to organize the necessary working area anywhere in the enterprise. We offer you in our person a reliable partner, from cooperation with which you get: Optimal prices for products, as you contact the manufacturer directly Deliveries exactly on time Goods with guaranteed quality Professional advice Possibility of manufacturing equipment to order Installation services Delivery services Possibility to purchase equipment in leasing Opportunity to insure cargo during its transportation.

The plant produces gantry and semi-gantry cranes according to TU-3155-011-87879481-2015. They belong to the bridge type of lifting equipment and are designed for installation and loading and unloading of goods weighing up to 50.0 tons. They are used in construction, logistics, industry. They can be used both indoors and outdoors, as a standard at temperatures from -20 to +40 ° C (other versions are possible). Easy to operate and maintain, have a long service life, save time and money spent on production tasks. You can order from us: - KK - gantry crane - with a suspended cargo monorail trolley moving along the driving beam of the bridge. - KKD - double-girder gantry crane - with a supporting cargo trolley moving from above along the bridge beam, on which the mechanisms for lifting the load and moving the trolley itself are installed. - KPK - semi-gantry crane - with a suspended cargo monorail trolley moving along the driving beam of the bridge. The main characteristics of manufactured gantry and semi-gantry cranes: Load capacity: up to 50.0 t Span length: up to 32.0 m Lifting height: up to 36.0 m The crane is controlled by a cable remote control with an emergency stop button. It is possible to install the option: radio control, control from the cab to increase the convenience and safety of operation. The mechanism for lifting and moving cargo is a hoist (hoist), which moves along the crane span or a stationary hoist mounted on a mobile trolley. The load-handling body is a hook suspension suspended on a rope rope stored in its drum Operating mode: A4 and higher according to ISO 4301/1 Execution: OPI / PBI To increase reliability, safety, and convenience of work, it is recommended to install additional options LLC Gruzopodyom has Certificates of Conformity TR CU 010/2011 "On the safety of machinery and equipment" and TR CU 012/2011 "On the safety of equipment for operation in explosive environments". We provide services for the design, production, delivery and installation of products on the territory of the Russian Federation and the CIS. By default, the equipment is painted orange RAL 2004. Other colors are available on request. We offer you in our person a reliable partner, from cooperation with which you get: Optimal prices for products, as you contact the manufacturer directly Deliveries exactly on time Goods with guaranteed quality Professional advice Possibility of manufacturing equipment to order Installation services Delivery services Possibility to purchase equipment in leasing Opportunity to insure cargo during its transportation.

The plant "Gruzopodyem" produces console cranes on a column, wall-mounted and special according to TU-31 5920-006-87879481-2013 and TU-31 5922-170-61817212-2012. The basis of the design is an arrow, which is installed on its own support or part of the building: a column or wall. Used to move any cargo weighing up to 16.0 tons. Convenient for working indoors - they practically do not take up useful space, while covering up to 360 ° of the working area - therefore they are often used in production workshops and warehouses. When installing additional options, they can be used on the street. The operating temperature in the basic configuration is from -20 to +40 °С. On request, execution from -40 °С is possible. The main characteristics of manufactured jib cranes: Load capacity: up to 16.0 tons Boom radius: up to 12.0 meters Angle of rotation: up to 360° Lifting height: up to 36.0 meters Crane version: OPI/PBI/VZI cable remote control with emergency stop button. It is possible to install the option of radio control for remote control. The boom of manual cranes is rotated by pulling, lifting, lowering the load either manually or using an electric mobile hoist and a control panel. The mechanism for lifting and moving the load is a hoist (hoist), which moves along the crane boom. of additional options LLC Gruzopodyem has Certificates of Conformity TR CU 010/2011 “On the safety of machinery and equipment” and TR TS 012/2011 “On the safety of equipment for operation in explosive environments”. We provide services for the design, production, delivery and installation of products on the territory of the Russian Federation and the CIS. By default, the equipment is painted orange RAL 2004. Other colors are available on request. We offer you in our person a reliable partner, from cooperation with which you get: Optimal prices for products, as you contact the manufacturer directly Deliveries exactly on time Goods with guaranteed quality Professional advice Possibility of manufacturing equipment to order Installation services Delivery services Possibility to purchase equipment in leasing Opportunity to insure cargo during its transportation.

For more than 10 years, the Gruzopodyem plant has been manufacturing and supplying beam cranes to enterprises in Russia and the CIS countries. Cranes-beams, as a rule, are called single-girder overhead cranes with a lifting capacity of up to 16.0 tons. They are widely used at manufacturing enterprises for repair, loading and unloading operations and other purposes. We produce crane beams with electric and manual drive, with a supporting and suspended structure. The main characteristics of manufactured crane beams: Load capacity: up to 16.0 tons Span length: up to 34.5 m Lifting height: up to 36.0 m The electric crane is controlled by a cable remote control with an emergency stop button. It is possible to install the “radio control” option for ease of operation. The mechanism for lifting and moving cargo is a hoist (hoist), which moves along the span of the crane. The load-handling body is a hook suspension suspended on a rope cable Operating mode: A4 according to ISO 4301/1 3K and 5K and higher Execution: OPI / PBI / VZI Can be operated in areas with seismic activity up to 9 points on the MSK-64 scale Depending on operating conditions it is recommended to connect certain options that increase the convenience and safety of working with equipment Gruzopodem LLC has Certificates of Conformity TR TS 010/2011 "On the safety of machinery and equipment" and TR CU 012/2011 "On the safety of equipment for work in explosive environments". We provide services for the design, production, delivery and installation of products on the territory of the Russian Federation and the CIS. By default, the equipment is painted orange RAL 2004. Other colors are available on request. We offer you in our person a reliable partner, from cooperation with which you get: Optimal prices for products, as you contact the manufacturer directly Deliveries exactly on time Goods with guaranteed quality Professional advice Possibility of manufacturing equipment to order Installation services Delivery services Possibility to purchase equipment in leasing Opportunity to insure cargo during its transportation.