ИП Чернышов Григорий Анатольевич

Gas meter "Prince-M" G40 measures the volume of consumed gas up to 65 m³ / h, at a temperature range from -40 to +60 ° С, is used as part of commercial gas metering units, in mobile boiler houses, apartment buildings for access and house gas metering ... The built-in thermocorrector, as well as telemetry of the development and production of the meter manufacturer, allows them to be installed in metering units where accurate readings of the reduced gas volume and remote data collection are required. All devices are guaranteed for 6 years. Maximum working pressure up to 5 kPa. The meter can be used to measure gas in centralized low pressure networks, as well as after the reduction gearbox of gas holders. The design of the device has small dimensions and weight up to 1.2 kg, there are no moving parts, additional maintenance of the gas meter is not required. Pre-installed nuts on DN 50 nozzles allow the meter to be mounted directly on the pipeline. Gaskets are included.

The high accuracy and small dimensions of the Prince-M G25 utility gas meter allows the device to be used as part of a commercial gas metering unit, in production and utilities. Each counter is equipped with a thermocorrector, it is possible to configure additional parameters. The meter operates at temperatures of the measured medium in the range from -40 to +60 ° С. Can be installed outdoors in unheated rooms, in harsh weather conditions. The design of the meter does not contain moving parts, which increases reliability, no additional maintenance is required. The meter is powered by a built-in battery designed for 10 years of operation. For the convenience of data retrieval, it is possible to organize a remote transmission system in various ways, integration with many gas suppliers.

Meters are installed in boiler rooms of production facilities, entrances of apartment buildings and at other facilities where a reliable accurate gas meter is required and space for installing additional equipment is limited. The operating temperature range is from -40 to +60 ° C, which guarantees accurate measurements even in the most severe conditions. The possibility of installation in unheated rooms and outdoors makes the gas meter unique in the utility segment, and the ready-to-use telemetry system allows you to control many meters by one operator. All devices are equipped with a temperature sensor located directly in the gas flow, which, according to the certified measurement procedure, makes it possible to bring the accumulated volume values to standard temperature conditions, it is possible to adjust the compressibility coefficient and set the pressure constant. The calibration interval and the manufacturer's warranty is 6 years, during which the company makes a replacement in case of a defect.