Imported pumps

Slurry pump SHR / 40B (2 / 1.5 B-AHR) Pump inlet: 51mm Pump outlet: 38mm Wet end material: Rubber R55 Pump casing material: Gray cast iron G01 Shaft material: steel 45 Seal Shaft Type: Gland Seal Impeller type: open Number of blades: 5pcs Impeller diameter: 180mm Max solid size: 16mm weight 104kg

vertical multistage pump CDL2-16 vertical multistage pump CDL2-16 head 121 m capacity 2 m3 / h pump type multistage voltage 380 pump material stainless steel AISI304 wheel material stainless steel AISI304 pump location vertical power 1.5 kW connection type thread wheel type centrifugal Description The CDL / CDLF is a versatile pump that can transport a variety of media, from tap water to industrial fluids, and is suitable for a variety of temperature, flow and pressure ranges. CDL is suitable for non-corrosive fluids and CDLF is suitable for moderately corrosive fluids. Application • Water supply: filtration and transportation in hydraulic structures, distribution of water in various zones of hydraulic structures, sealing of main pipes and sealing of high-rise buildings. • Industrial applications: water supply system, purification system, high pressure washing system and fire extinguishing system. • Industrial transport of liquids: refrigeration and air conditioning systems, boiler feed water systems and condensation systems, industrial machine support, acid and alkali pumping. • Water treatment: ultrafiltration system, reverse osmosis system, distillation system, separator and pool. • Irrigation: agricultural irrigation, rain and drip irrigation. Technical details • Temperature of liquid: -15 ° C to + 70 ° C for standard pump type from -15 ° C to + 120 ° C for hot water on request • Ambient temperature: maximum + 40 ° C • Materials of the pump - stainless steel AISI304 - standard pump type • Materials of the pump - stainless steel AISI3 16 - on request The principle of operation s CDL / CDLF is a vertical multistage centrifugal pump for standard installation of the engine and pump hydraulics in a vertical position. The motor shaft is directly connected to the pump shaft through a central coupling. Flanges are flush in the -in-line position. Therefore, the pump can be configured with intelligent protection in the form of a remote control in accordance with the needs of the buyer and with the water supply project, such a system can perform effective protection, such as protection against pump dry run, phase failure, overload, etc. Electric motor • The electric motor is a fully enclosed air-cooled standard motor. • Degree of protection: IP55. • Insulation class: F • Standard voltage: 50 Hz: 1 x 220-230 / 240 V • speed of rotation 2900 rpm 3x200-220 / 346-380 V 3х220-240 / 380-415 V 3x380-415V

vertical multistage pump CDL2-15 analogue of speroni VS2-15 lowara 1SV27 vertical multistage pump CDL2-15 head 112 m capacity 2 m3 / h pump type multistage voltage 380 pump material stainless steel AISI304 wheel material stainless steel AISI304 pump location vertical power 1.5 kW connection type thread wheel type centrifugal vertical multistage pump CDL2-15 analogue of speroni VS2-15 lowara 1SV27 vertical multistage pump CDL2-15 head 112 m capacity 2 m3 / h pump type multistage voltage 380 pump material stainless steel AISI304 wheel material stainless steel AISI304 pump location vertical power 1.5 kW connection type thread wheel type centrifugal

vertical multistage pump CDL2-14 vertical multistage pump CDL2-14 head 107 m capacity 2 m3 / h pump type multistage voltage 380 pump material stainless steel AISI304 wheel material stainless steel AISI304 pump location vertical power 1.5 kW connection type thread wheel type centrifugal Description The CDL / CDLF is a versatile pump that can transport a variety of media, from tap water to industrial fluids, and is suitable for a variety of temperature, flow and pressure ranges. CDL is suitable for non-corrosive fluids and CDLF is suitable for moderately corrosive fluids. Application • Water supply: filtration and transportation in hydraulic structures, distribution of water in various zones of hydraulic structures, sealing of main pipes and sealing of high-rise buildings. • Industrial applications: water supply system, purification system, high pressure washing system and fire extinguishing system. • Industrial transport of liquids: refrigeration and air conditioning systems, boiler feed water systems and condensation systems, industrial machine support, acid and alkali pumping. • Water treatment: ultrafiltration system, reverse osmosis system, distillation system, separator and pool. • Irrigation: agricultural irrigation, rain and drip irrigation. Technical details • Temperature of liquid: -15 ° C to + 70 ° C for standard pump type from -15 ° C to + 120 ° C for hot water on request • Ambient temperature: maximum + 40 ° C • Materials of the pump - stainless steel AISI304 - standard pump type • Materials of the pump - stainless steel AISI3 16 - on request The principle of operation s CDL / CDLF is a vertical multistage centrifugal pump for standard installation of the engine and pump hydraulics in a vertical position. The motor shaft is directly connected to the pump shaft through a central coupling. Flanges are flush in the -in-line position. Therefore, the pump can be configured with intelligent protection in the form of a remote control in accordance with the needs of the buyer and with the water supply project, such a system can perform effective protection, such as protection against pump dry run, phase failure, overload, etc. Electric motor • The electric motor is a fully enclosed air-cooled standard motor. • Degree of protection: IP55. • Insulation class: F • Standard voltage: 50 Hz: 1 x 220-230 / 240 V • speed of rotation 2900 rpm 3x200-220 / 346-380 V 3х220-240 / 380-415 V 3x380-415V

vertical multistage pump CDL2-13 analog lowara 1SV25 vertical multistage pump CDL2-13 head 98 m capacity 2 m3 / h pump type multistage voltage 380 pump material stainless steel AISI304 wheel material stainless steel AISI304 pump location vertical power 1.5 kW connection type thread wheel type centrifugal Description The CDL / CDLF is a versatile pump that can transport a variety of media, from tap water to industrial fluids, and is suitable for a variety of temperature, flow and pressure ranges. CDL is suitable for non-corrosive fluids and CDLF is suitable for moderately corrosive fluids. Application • Water supply: filtration and transportation in hydraulic structures, distribution of water in various zones of hydraulic structures, sealing of main pipes and sealing of high-rise buildings. • Industrial applications: water supply system, purification system, high pressure washing system and fire extinguishing system. • Industrial transport of liquids: refrigeration and air conditioning systems, boiler feed water systems and condensation systems, industrial machine support, acid and alkali pumping. • Water treatment: ultrafiltration system, reverse osmosis system, distillation system, separator and pool. • Irrigation: agricultural irrigation, rain and drip irrigation. Technical details • Temperature of liquid: -15 ° C to + 70 ° C for standard pump type from -15 ° C to + 120 ° C for hot water on request • Ambient temperature: maximum + 40 ° C • Materials of the pump - stainless steel AISI304 - standard pump type • Materials of the pump - stainless steel AISI3 16 - on request The principle of operation s CDL / CDLF is a vertical multistage centrifugal pump for standard installation of the engine and pump hydraulics in a vertical position. The motor shaft is directly connected to the pump shaft through a central coupling. Flanges are flush in the -in-line position. Therefore, the pump can be configured with intelligent protection in the form of a remote control in accordance with the needs of the buyer and with the water supply project, such a system can perform effective protection, such as protection against pump dry run, phase failure, overload, etc. Electric motor • The electric motor is a fully enclosed air-cooled standard motor. • Degree of protection: IP55. • Insulation class: F • Standard voltage: 50 Hz: 1 x 220-230 / 240 V • speed of rotation 2900 rpm 3x200-220 / 346-380 V 3х220-240 / 380-415 V 3x380-415V

vertical multistage pump CDL2-12 vertical multistage pump CDL2-12 head 89 m capacity 2 m3 / h pump type multistage voltage 380 pump material stainless steel AISI304 wheel material stainless steel AISI304 pump location vertical power 1.5 kW connection type thread wheel type centrifugal Description The CDL / CDLF is a versatile pump that can transport a variety of media, from tap water to industrial fluids, and is suitable for a variety of temperature, flow and pressure ranges. CDL is suitable for non-corrosive fluids and CDLF is suitable for moderately corrosive fluids. Application • Water supply: filtration and transportation in hydraulic structures, distribution of water in various zones of hydraulic structures, sealing of main pipes and sealing of high-rise buildings. • Industrial applications: water supply system, purification system, high pressure washing system and fire extinguishing system. • Industrial transport of liquids: refrigeration and air conditioning systems, boiler feed water systems and condensation systems, industrial machine support, acid and alkali pumping. • Water treatment: ultrafiltration system, reverse osmosis system, distillation system, separator and pool. • Irrigation: agricultural irrigation, rain and drip irrigation. Technical details • Temperature of liquid: -15 ° C to + 70 ° C for standard pump type from -15 ° C to + 120 ° C for hot water on request • Ambient temperature: maximum + 40 ° C • Materials of the pump - stainless steel AISI304 - standard pump type • Materials of the pump - stainless steel AISI3 16 - on request The principle of operation s CDL / CDLF is a vertical multistage centrifugal pump for standard installation of the engine and pump hydraulics in a vertical position. The motor shaft is directly connected to the pump shaft through a central coupling. Flanges are flush in the -in-line position. Therefore, the pump can be configured with intelligent protection in the form of a remote control in accordance with the needs of the buyer and with the water supply project, such a system can perform effective protection, such as protection against pump dry run, phase failure, overload, etc. Electric motor • The electric motor is a fully enclosed air-cooled standard motor. • Degree of protection: IP55. • Insulation class: F • Standard voltage: 50 Hz: 1 x 220-230 / 240 V • speed of rotation 2900 rpm 3x200-220 / 346-380 V 3х220-240 / 380-415 V 3x380-415V

vertical multistage pump CDL2-11 analogue of speroni VS2-11 lowara 1SV22 vertical multistage pump CDL2-11 head 82 m capacity 2 m3 / h pump type multistage voltage 380 pump material stainless steel AISI304 wheel material stainless steel AISI304 pump location vertical power 1.1 kW connection type thread wheel type centrifugal Description The CDL / CDLF is a versatile pump that can transport a variety of media, from tap water to industrial fluids, and is suitable for a variety of temperature, flow and pressure ranges. CDL is suitable for non-corrosive fluids and CDLF is suitable for moderately corrosive fluids. Application • Water supply: filtration and transportation in hydraulic structures, distribution of water in various zones of hydraulic structures, sealing of main pipes and sealing of high-rise buildings. • Industrial applications: water supply system, purification system, high pressure washing system and fire extinguishing system. • Industrial transport of liquids: refrigeration and air conditioning systems, boiler feed water systems and condensation systems, industrial machine support, acid and alkali pumping. • Water treatment: ultrafiltration system, reverse osmosis system, distillation system, separator and pool. • Irrigation: agricultural irrigation, rain and drip irrigation. Technical details • Temperature of liquid: -15 ° C to + 70 ° C for standard pump type from -15 ° C to + 120 ° C for hot water on request • Ambient temperature: maximum + 40 ° C • Materials of the pump - stainless steel AISI304 - standard pump type • Materials of the pump - stainless steel AISI3 16 - on request The principle of operation s CDL / CDLF is a vertical multistage centrifugal pump for standard installation of the engine and pump hydraulics in a vertical position. The motor shaft is directly connected to the pump shaft through a central coupling. Flanges are flush in the -in-line position. Therefore, the pump can be configured with intelligent protection in the form of a remote control in accordance with the needs of the buyer and with the water supply project, such a system can perform effective protection, such as protection against pump dry run, phase failure, overload, etc. Electric motor • The electric motor is a fully enclosed air-cooled standard motor. • Degree of protection: IP55. • Insulation class: F • Standard voltage: 50 Hz: 1 x 220-230 / 240 V • speed of rotation 2900 rpm 3x200-220 / 346-380 V 3х220-240 / 380-415 V 3x380-415V

vertical multistage pump CDL2-10 vertical multistage pump CDL2-10 head 72 m capacity 2 m3 / h pump type multistage voltage 380 pump material stainless steel AISI304 wheel material stainless steel AISI304 pump location vertical power 1.1 kW connection type thread wheel type centrifugal Description The CDL / CDLF is a versatile pump that can transport a variety of media, from tap water to industrial fluids, and is suitable for a variety of temperature, flow and pressure ranges. CDL is suitable for non-corrosive fluids and CDLF is suitable for moderately corrosive fluids. Application • Water supply: filtration and transportation in hydraulic structures, distribution of water in various zones of hydraulic structures, sealing of main pipes and sealing of high-rise buildings. • Industrial applications: water supply system, purification system, high pressure washing system and fire extinguishing system. • Industrial transport of liquids: refrigeration and air conditioning systems, boiler feed water systems and condensation systems, industrial machine support, acid and alkali pumping. • Water treatment: ultrafiltration system, reverse osmosis system, distillation system, separator and pool. • Irrigation: agricultural irrigation, rain and drip irrigation. Technical details • Temperature of liquid: -15 ° C to + 70 ° C for standard pump type from -15 ° C to + 120 ° C for hot water on request • Ambient temperature: maximum + 40 ° C • Materials of the pump - stainless steel AISI304 - standard pump type • Materials of the pump - stainless steel AISI3 16 - on request The principle of operation s CDL / CDLF is a vertical multistage centrifugal pump for standard installation of the engine and pump hydraulics in a vertical position. The motor shaft is directly connected to the pump shaft through a central coupling. Flanges are flush in the -in-line position. Therefore, the pump can be configured with intelligent protection in the form of a remote control in accordance with the needs of the buyer and with the water supply project, such a system can perform effective protection, such as protection against pump dry run, phase failure, overload, etc. Electric motor • The electric motor is a fully enclosed air-cooled standard motor. • Degree of protection: IP55. • Insulation class: F • Standard voltage: 50 Hz: 1 x 220-230 / 240 V • speed of rotation 2900 rpm 3x200-220 / 346-380 V 3х220-240 / 380-415 V 3x380-415V

vertical multistage pump CDL2-9 analog lowara 1SV17 vertical multistage pump CDL2-9 head 67 m capacity 2 m3 / h pump type multistage voltage 380 pump material stainless steel AISI304 wheel material stainless steel AISI304 pump location vertical power 1.1 kW connection type thread wheel type centrifugal Description The CDL / CDLF is a versatile pump that can transport a variety of media, from tap water to industrial fluids, and is suitable for a variety of temperature, flow and pressure ranges. CDL is suitable for non-corrosive fluids and CDLF is suitable for moderately corrosive fluids. Application • Water supply: filtration and transportation in hydraulic structures, distribution of water in various zones of hydraulic structures, sealing of main pipes and sealing of high-rise buildings. • Industrial applications: water supply system, purification system, high pressure washing system and fire extinguishing system. • Industrial transport of liquids: refrigeration and air conditioning systems, boiler feed water systems and condensation systems, industrial machine support, acid and alkali pumping. • Water treatment: ultrafiltration system, reverse osmosis system, distillation system, separator and pool. • Irrigation: agricultural irrigation, rain and drip irrigation. Technical details • Temperature of liquid: -15 ° C to + 70 ° C for standard pump type from -15 ° C to + 120 ° C for hot water on request • Ambient temperature: maximum + 40 ° C • Materials of the pump - stainless steel AISI304 - standard pump type • Materials of the pump - stainless steel AISI3 16 - on request The principle of operation s CDL / CDLF is a vertical multistage centrifugal pump for standard installation of the engine and pump hydraulics in a vertical position. The motor shaft is directly connected to the pump shaft through a central coupling. Flanges are flush in the -in-line position. Therefore, the pump can be configured with intelligent protection in the form of a remote control in accordance with the needs of the buyer and with the water supply project, such a system can perform effective protection, such as protection against pump dry run, phase failure, overload, etc. Electric motor • The electric motor is a fully enclosed air-cooled standard motor. • Degree of protection: IP55. • Insulation class: F • Standard voltage: 50 Hz: 1 x 220-230 / 240 V • speed of rotation 2900 rpm 3x200-220 / 346-380 V 3х220-240 / 380-415 V 3x380-415V

vertical multistage pump CDL2-8 vertical multistage pump CDL2-8 head 58 m capacity 2 m3 / h pump type multistage voltage 380 pump material stainless steel AISI304 wheel material stainless steel AISI304 pump location vertical power 1.1 kW connection type thread wheel type centrifugal Description The CDL / CDLF is a versatile pump that can transport a variety of media, from tap water to industrial fluids, and is suitable for a variety of temperature, flow and pressure ranges. CDL is suitable for non-corrosive fluids and CDLF is suitable for moderately corrosive fluids. Application • Water supply: filtration and transportation in hydraulic structures, distribution of water in various zones of hydraulic structures, sealing of main pipes and sealing of high-rise buildings. • Industrial applications: water supply system, purification system, high pressure washing system and fire extinguishing system. • Industrial transport of liquids: refrigeration and air conditioning systems, boiler feed water systems and condensation systems, industrial machine support, acid and alkali pumping. • Water treatment: ultrafiltration system, reverse osmosis system, distillation system, separator and pool. • Irrigation: agricultural irrigation, rain and drip irrigation. Technical details • Temperature of liquid: -15 ° C to + 70 ° C for standard pump type from -15 ° C to + 120 ° C for hot water on request • Ambient temperature: maximum + 40 ° C • Materials of the pump - stainless steel AISI304 - standard pump type • Materials of the pump - stainless steel AISI3 16 - on request The principle of operation s CDL / CDLF is a vertical multistage centrifugal pump for standard installation of the engine and pump hydraulics in a vertical position. The motor shaft is directly connected to the pump shaft through a central coupling. Flanges are flush in the -in-line position. Therefore, the pump can be configured with intelligent protection in the form of a remote control in accordance with the needs of the buyer and with the water supply project, such a system can perform effective protection, such as protection against pump dry run, phase failure, overload, etc. Electric motor • The electric motor is a fully enclosed air-cooled standard motor. • Degree of protection: IP55. • Insulation class: F • Standard voltage: 50 Hz: 1 x 220-230 / 240 V • speed of rotation 2900 rpm 3x200-220 / 346-380 V 3х220-240 / 380-415 V 3x380-415V

vertical multistage pump CDL2-7 analogue of speroni VS2-7 Lowara 1SV13 vertical multistage pump CDL2-7 head 52 m capacity 2 m3 / h pump type multistage voltage 380 pump material stainless steel AISI304 wheel material stainless steel AISI304 pump location vertical power 0.75 kW connection type thread wheel type centrifugal Description The CDL / CDLF is a versatile pump that can transport a variety of media, from tap water to industrial fluids, and is suitable for a variety of temperature, flow and pressure ranges. CDL is suitable for non-corrosive fluids and CDLF is suitable for moderately corrosive fluids. Application • Water supply: filtration and transportation in hydraulic structures, distribution of water in various zones of hydraulic structures, sealing of main pipes and sealing of high-rise buildings. • Industrial applications: water supply system, purification system, high pressure washing system and fire extinguishing system. • Industrial transport of liquids: refrigeration and air conditioning systems, boiler feed water systems and condensation systems, industrial machine support, acid and alkali pumping. • Water treatment: ultrafiltration system, reverse osmosis system, distillation system, separator and pool. • Irrigation: agricultural irrigation, rain and drip irrigation. Technical details • Temperature of liquid: -15 ° C to + 70 ° C for standard pump type from -15 ° C to + 120 ° C for hot water on request • Ambient temperature: maximum + 40 ° C • Materials of the pump - stainless steel AISI304 - standard pump type • Materials of the pump - stainless steel AISI3 16 - on request The principle of operation s CDL / CDLF is a vertical multistage centrifugal pump for standard installation of the engine and pump hydraulics in a vertical position. The motor shaft is directly connected to the pump shaft through a central coupling. Flanges are flush in the -in-line position. Therefore, the pump can be configured with intelligent protection in the form of a remote control in accordance with the needs of the buyer and with the water supply project, such a system can perform effective protection, such as protection against pump dry run, phase failure, overload, etc. Electric motor • The electric motor is a fully enclosed air-cooled standard motor. • Degree of protection: IP55. • Insulation class: F • Standard voltage: 50 Hz: 1 x 220-230 / 240 V • speed of rotation 2900 rpm 3x200-220 / 346-380 V 3х220-240 / 380-415 V 3x380-415V

vertical multistage pump CDL2-6 analog lowara 1SV12 vertical multistage pump CDL2-6 head 45 m capacity 2 m3 / h pump type multistage voltage 380 pump material stainless steel AISI304 wheel material stainless steel AISI304 pump location vertical power 0.75 kW connection type thread wheel type centrifugal Description The CDL / CDLF is a versatile pump that can transport a variety of media, from tap water to industrial fluids, and is suitable for a variety of temperature, flow and pressure ranges. CDL is suitable for non-corrosive fluids and CDLF is suitable for moderately corrosive fluids. Application • Water supply: filtration and transportation in hydraulic structures, distribution of water in various zones of hydraulic structures, sealing of main pipes and sealing of high-rise buildings. • Industrial applications: water supply system, purification system, high pressure washing system and fire extinguishing system. • Industrial transport of liquids: refrigeration and air conditioning systems, boiler feed water systems and condensation systems, industrial machine support, acid and alkali pumping. • Water treatment: ultrafiltration system, reverse osmosis system, distillation system, separator and pool. • Irrigation: agricultural irrigation, rain and drip irrigation. Technical details • Temperature of liquid: -15 ° C to + 70 ° C for standard pump type from -15 ° C to + 120 ° C for hot water on request • Ambient temperature: maximum + 40 ° C • Materials of the pump - stainless steel AISI304 - standard pump type • Materials of the pump - stainless steel AISI3 16 - on request The principle of operation s CDL / CDLF is a vertical multistage centrifugal pump for standard installation of the engine and pump hydraulics in a vertical position. The motor shaft is directly connected to the pump shaft through a central coupling. Flanges are flush in the -in-line position. Therefore, the pump can be configured with intelligent protection in the form of a remote control in accordance with the needs of the buyer and with the water supply project, such a system can perform effective protection, such as protection against pump dry run, phase failure, overload, etc. Electric motor • The electric motor is a fully enclosed air-cooled standard motor. • Degree of protection: IP55. • Insulation class: F • Standard voltage: 50 Hz: 1 x 220-230 / 240 V • speed of rotation 2900 rpm 3x200-220 / 346-380 V 3х220-240 / 380-415 V 3x380-415V