Hann Kuen Machinery And Hardware

ST slide table is designed with lead screw and hand wheel tansmission to set require positions. Feature: 1. High tensile cast iron normalized and stress relieved 2.Parallelism : within 0.02mm/100mm

CHH Cross hydraulic slide table is designed with hydraulic cylinder and fluid valve controller for feeding control. Feature: 1. High tensile cast iron normalized and stress relieved 2.Automated driven by hydraulic power pack 3.Optional telescopic covers 4.Parallelism : within 0.01mm/100mm

VSS Vertical slide unit is designed with hardness guideway and standard ball screw class C7 which are incorporated with a servo motor for spindle feeding. Feature: 1.Turcite is included to reduce friction 2.Capable to mount with your prefer brand servo motor 3.Ball screw class C5 or C3 is available upon request 4.Servo motor stand / coupling / telescopic included 5.DELTA servo motor is available 6.Optional telescopic covers 7.Perpendicularity : within 0.01mm/100mm

RH150 slide unit is designed with linear rails and precision class ball screw which are incorporated a servo motor. RH150 linear guide slide is guided by rolling element blocks, either ball or cylindrical rollers. These rollers allow the slide to operate with zero friction, move rapidly and creating less heat. The advantages of linear motion slide are smooth, fast and extremely accurate positioning performance due to low friction. Feature: 1. Capable to mount with your prefer brand servo motor 2.Ball screw class C5 or C3 is available upon request 3. Ball or cylindrical rollers is available for linear blocks 4. Servo motor stand / coupling / telescopic included 5. DELTA servo motor is available 6.Parallelism : within 0.01mm/100mm

BS150 hardened way is a linear motion slide that incorporates precision and ground rectangular way guides. This generates more friction and decreases speed, but tremendously increases durability. It is used when accuracy, dampening and rigidity are required while machining. The surface of rectangular way guides and shim are grinded and scrapped, the contact surface of saddle are glued with turcite which reduces the friction. Shim is required to be adjusted and aligned when backlash is generated for the contact surface. Feature: 1. Turcite is included to reduce friction 2. Shim is included to precisely align, level, and adjust spacing for sliding parallelism. 3. Capable to mount with your prefer brand servo motor 4. Ball screw class C5 or C3 is available upon request 5. Servo motor stand / coupling / telescopic included 6.DELTA servo motor is available 7.Parallelism : within 0.01mm/100mm

S60-FA408 facing head slider transmission is designed with linear rails and a ball screw grade C5 which are incorporated with a servo motor. The roundness of spindle nose is within 0.002mm and repeatability of facing head slider is within 0.01mm. This unit is capable for processing like inner (ID) and outer (OD) turning, grooving, conical boring, conical threading, concave/convex rounding and other spherical machining. Feature: 1.Facing slide stroke 8mm 2.Facing slider repeatability within 0.005mm 3.Standard 3-phase AC motor 2.2kW is included, optional maximum power up to 3.7kW 4.Belt driven at fixed speed and incorporate a timing belt 5. Available for servo driven at variable speeds 6. AC Induction Motor protection IP 54

S25 spindle housing itself is an FC30 casting, which further underwent precision boring and honing, and the material for spindle are alloy steels subjected to high frequency heat treatment. They are assembled with SKF Germany, NSK Japan and Taiwan TPI precision bearings which maintaining the spindle nose accuracy 0.002mm or less. Its maximum capacity RPM 12000 is suitable to mount on a CNC servo slide or hydraulic feed table for your machining applications. Feature: 1.Standard 3-phase AC motor 0.18kW is included, optional maximum power up to 0.37kW 2.Belt driven at fixed speed and incorporate a timing or Poly-V belt 3.Spindle taper ER20 is available 4.Available for servo driven at variable speeds 5.AC Induction Motor protection IP 54 6.Gearbox motor is available upon request

ST1N tapping spindle unit is designed with lead screw transmission and supported automatic thread cutting and float tap chuck. The maximum tapping capacity is M12 (S45C). Feature: 1.Standard 3-phase AC motor 0.75kW is included, optional maximum power up to 1.5kW 2.Belt driven at fixed speed and incorporate a timing or V belt 3.Spindle taper ER20, JT6, MT2 and AS22 are available 4.Available for servo driven at variable speeds 5.OMRON proximity switch sensors and stand are furnished 6.AC Induction Motor protection IP 54 7. Gearbox motor is available upon request

SD3 is a selfeeder drilling unit with an oil damper for air feed or hydraulic valve to control the feeding rate. The accuracy of spindle nose is strictly under 0.003mm and maximum drilling capacity up to 6mm (S45C). This unit allows to perform all types of machining applications such as drilling, chamfering, reaming and countersinking. Feature: 1.Standard 3-phase AC motor 0.4kW is included, optional maximum power up to 0.75kW 2. Belt driven at fixed speed and incorporate a Poly-V belt 3.Spindle taper ER16, JT1 and JT2 are available 4.Available for servo driven at variable speeds 5.OMRON proximity switch sensors and stand are furnished 6. AC Induction Motor protection IP 54

SSD03 spindle unit is designed servo feeding with ball screw grade C5 and servo motor, the accuracy of spindle nose is strictly under 0.003mm and maximum drilling capacity up to 6mm (S45C). This unit allows to perform all types of machining applications such as drilling, tapping, chamfering, reaming and countersinking.   Feature: 1. Standard 3-phase AC motor 0.4kW is included, optional maximum power up to 0.75kW 2. Belt driven at fixed speed and incorporate a timing, V or Poly-V belt 3. Feed rate is programmable and driven by preferable servo motor 4. Feeding is driven by HIWIN or PMI Grade C5 ball screw 5. Spindle taper ER16, JT1 and JT2 are available 6. Available for servo driven at variable speeds 7. OMRON proximity switch sensors and stand are furnished 8. AC Induction Motor protection IP 54