Factory supply

Specifications • Length: 6 m • Width: 2.5 m • Height: 3 m • Weight: 2500 kg • Reading speed: 0.5-0.7 km / h • Productivity: 1.5 ha / day Conditions for machine harvesting • Condition for machine harvesting is 1.6 m of clean wood and a minimum row spacing of 3 m. ECONOMY • The machine is easy to operate and since it does not have a tractor or trailer it does not require much room to turn. AMOUNT • By aiming the generator at the shoulder branches instead of the tree, it is also possible to harvest plantations that are not planned for machine harvesting (the height of the first shoulder branches is less than 50 cm). QUALITY • No harmful effects on wood. Use • The harvester is designed for harvesting raspberries (meadow, polka, heritage), currants, chokeberries and rose hips. • The harvester is designed as a self-propelled machine powered by a 54 hp diesel engine. with. • The machine is operated by at least two employees (driver and crate remover). • The harvester is also adapted for night harvesting. • The machine is serviced by a minimum of four workers. • The machines have room for full and empty boxes. • The driver of the combine is located next to the generator, from where he can easily control the harvesting process and monitor the position of the machine, which was not the case with the towed machines. • By using a combine harvester, we also solve the previous problem of trampling raspberries with a tractor. • The machine is equipped with a hydraulic steering wheel. • A trailer can be attached to the machine for storing boxes. • Due to its size, this pick-up is designed for larger plantations and more flat terrain. • The pick-up is easy to handle and no special training is required.

Manufactured in Serbia. Specifications Length: 6 m Width: 2.5 m Height: 3 m Weight: 1950 kg the minimum spacing between rows is 4 m. Economy · The productivity of the machine is three to four trees per minute. Quantity · Collect much taller trees with more fruit than handpicked trees. Quality · The collector is universal for all distances in a row. Uses · The assembler SP-08 is built as a self-propelled machine. · It was equipped with a 35 hp diesel engine. · The machine uses a hydraulic handle controlled by the driver to dispose of the fetus. · The receiving cloth is placed in two planes that form the Latin letter "V" around the tree. Planes placed in this way allow easy harvesting without lifting branches. The opposite side of the tarpaulin is carried by the machine, and for trees over 5 m high, the other side is placed on the wheels and can be easily dragged from tree to tree. · The machine is serviced by at least four workers. · A trailer can be attached to the machine for storing boxes. · Due to its size, this collector is designed for large plantations and flatter terrain. · The assembler is easy to use and no special training is required. · A harmful effect on the tree is excluded. A prerequisite for harvesting the machine is that the height of the tree to the first branches of the arm must be higher than 50 cm and the minimum spacing between rows is 4 m. the height of the first branches of the shoulder is below 50 cm).

COMBINE FOR HARVESTING RASPBERRY AND BLACKBERRY Produced in Serbia. Specifications Length: 4.6 m Width: 2.7 m Height: 2.9 m Weight: 3 t Working speed: 1.8 km / h Vehicle speed: 10 km / h Drive: Diesel 35HP Conditions for the procurement of machines The minimum spacing between views is 2 m. The maximum height of the posts in a row is 2 m. Economics Up to 5 hectares can be harvested in one day with a harvester. To achieve this daily effect through manual cleaning, about 100 workers need to be hired. Quantity Unlike manual harvesting, only technologically ripe fruits that are of high quality and heavy are harvested from the plant. Using the mill eliminates the problem of labor shortages during the harvest season, so raspberry and blackberry growers can grow larger plantations and make the job more profitable. Quality The use of the plant facilitates the processing of fruits after harvest, since the harvested fruits are technologically ripe and homogeneous. Harvesting the machine avoids direct contact of workers with the fruit, so the fruit is microbiologically correct. Usage The raspberry and blackberry harvester is built as a self-propelled agricultural machine, whose fruit picking is based on a system of causing vibrations in the fruit shed, which causes the fruit to fall. This type of crop can effectively reduce only technologically ripe fruits without damage. Fruits are accepted and transported by conveyor to the place of automatic removal of impurities and storage of fruits in packaging. The harvester has a specially designed automatic leveling system that allows it to be used on sloping terrain. The harvester serves at least three workers: the driver of the machine and two workers to remove packaging and manage the fruit.