CREEWEE NEW MATERIALS TECHNOLOGY CO.,LTD

Our conductive foam gaskets are perforated at variable intervals before being metal coated in (metal) baths. This completely saturates the foam and makes it fully conductive (both horizontally and vertically), thus ensuring a particularly good conductive connection between the top and bottom. The seals have excellent properties as a result of the small distance between the holes. Our conductive foams are available in thicknesses of 0.3 mm to 1.5 mm and can be supplied with a copper-nickel metal coating. Characteristics of conductive foam It can be used in a temperature range from -50°C to +100°C and feature excellent shielding effectiveness in the high frequency range. Conductive foam seals have improved Z-axis conductivity which means that their shielding properties can be increased to over 90db within a wide frequency range. Standard dimensions as well as customized stampings Our foam seals are available in a wide range of standard dimensions. We can supply them either in the form of thin panels which are ideal for shielding large areas or in customized stampings for I/O shielding.

Specifications: Substrate thickness: 0.007mm-0.075mm Adhesive thickness: 0.015mm~0.04mm Colloid composition: ordinary pressure sensitive adhesive (non-conductive) and conductive pressure sensitive adhesive Peeling force: 0.2~1.5kgf/25mm (180 degree reverse peeling force test) Temperature resistance -10℃---120℃ Tensile strength 4.5~4.8kg/mm Elongation 7%~10%MIN Product length: 33M, 50M or customized Product width: 13mm & 25mm or customized Product features: Creewee Copper Foil Tape Copper with special adhesive, it is to eliminate electromagnetic (EMI) interference. It is mainly used in electromagnetic shielding, electrical signal shielding and magnetic signal shielding. Electrical signal shielding mainly relies on the excellent electrical conductivity of copper itself. Magnetic shielding requires the conductive material "nickel" on the rubber surface of the copper foil tape to achieve the effect of magnetic shielding. In addition, it has a good effect on electrostatic discharge after grounding, strong adhesion, and good electrical conductivity. Materials: 1) Aluminium Tape with conductive adhesive 2) Copper Tape with non-conductive adhesive 3) Copper Tape with conductive adhesive 4) Copper Tape with conductive adhesive both sides 5) Tin-clad Copper Tape with non-conductive adhesive 6) Tin-clad Copper Tape with conductive adhesive Applications: Suitable for all kinds of transformers, mobile phones, computers, PDAs, PDPs, LCD monitors, laptop, computers, printers and other electronic products where electromagnetic shielding is required.

Model No. G0226HPF Materials: Kapton Tape (Polyimide film） Thinness: 0.05mm Film Size: 4.5*4.5mm-- 24*24mm Customs size: Fit all Sensor Module size The film is applied in below Industries: Protect CCTV Camera Image sensor CMOS surface out of dust during assembly; Protect the CMOS sensor, through SMT process under 280 ℃degrees without leaving adhesive residue; Due to Low viscosity and heat resist, Kapton film can be easily peeled off without leaving adhesive residue; Can be attached to the IR Glass surface near temperature furnace, to protect the lens surface away from dust and scratches in the manufacturing process.