Pneumatic Flux Chipper - SM04A - 97993

FLOWMATE Food Grade Pump Water Pump Diaphragm Pump KDP-14 series 12V/24V DC Pump Electric Pump Permanent Magnet Brush/brushless Motor Assemblied Open Flow 1-2LPM Designed for General Purpose Water Dispenser Coffee Machine Auto Vending Machine Portable Electric Sprayer etc.   Product label: FLOWMATE, KDP-14, Pump, Water Pump, Diaphragm Pump, Membrane Pump, Mini Pump, Micro Pump, DC Pump, DC Water Pump, DC Diaphragm Pump, DC Membrane Pump, Mini Water Pump, Mini Diaphragm Pump, Mini Membrane Pump, Micro Water Pump, Micro Diaphragm Pump, Micro Membrane Pump, Electric Pump, Electric Water Pump, Electric Diaphragm Pump, Electric Membrane Pump, Brush Pump, Brushless Pump, Food Grade Pump, Water Dispenser Pump, Water System Pump, Coffee Machine Pump, Vending Machine Pump, Ice Maker Pump, Agriculture pump, Electric Sprayer Pump,  Self-priming pump, micro self-priming pump, mini self-priming pump, self-priming water pump, self-priming diaphragm pump   Diaphragm Pumps are used extensively in many industries and can handle a very wide variety of liquids. Diaphragm Pumps are in the category of "positive displacement" pumps because their flowrates do not vary much with the discharge "head" (or pressure) the pump is working against (for a given pump speed). Diaphragm Pumps can transfer liquids with low, medium or high viscosities and also liquids with a large solids content. They can also handle many aggressive chemicals such as acids because they can be constructed with a wide variety of body materials and diaphragms   Features 1. Food grade2. Small size and easy installation3. Low noise with smooth running4. Self-priming with dry suction 1-2.5 meters5. Dry run without damage6. Long life permanent magnet DC brush motor7. Varible hosing port can be customized 8. Explosion proof design for flammable refrigerants9. Handling cold water and hot water 0-100℃   Applications 1. Water dispenser 2. Coffee machine 3. Vending machine 4. Ice maker 5. Tea table water dispensing 6. Integrated stove 7. Medical equipment 8. Chemical instrument 9. Electric sprayer 10. Wine taker 11. Water purifier/filtration   Specifications Model Hosing Port Rated Volts (VDC) Rated Amps (A) Open Flow (L/min) Noise 30CM (dB) Dry Suction (m) Head (m) Output Pressure (MPA) Weight (KG) Duty Cycle KDP-14 Φ1/4"(6.5mm) OD Pipe 12 0.2 0.8±0.2 43 1.0/1.8 2 0.08 (10PSI) 0.25 Intermittent 12/24 0.3/0.15 1.0± 0.2 45 1.2/2.0 5 0.15 (20PSI) 0.25 Intermittent 12/24 0.4/0.2 1.2± 0.2 48 1.5/2.5 7 0.2 (30PSI) 0.25 Intermittent 12/24 0.5/0.3 1.4± 0.2 50 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.6/0.35 1.6± 0.2 52 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.7/0.4 1.8± 0.2 54 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.8/0.5 2.0± 0.2 56 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 1.0/0.6 2.3± 0.3 58 1.5 10 0.3 (45PSI) 0.25 Intermittent Tested with clean water at 25℃。   Wetted Parts Material Construction Pump housing - PP/PP+20%GF Pump covers - PP/PP+20%GF Diaphragms - Silicone/EPDM/VITON/Santoprene TPV Check valve sealings - Silicone/EPDM/VITON   Performance Curve   Dimension Drawings  

SOVOFLO Food Grade Pump Water Pump Diaphragm Pump KDP-14B series 12V/24V DC Pump Electric Pump Permanent Magnet Brush/brushless Motor Assemblied Open Flow 1-2LPM Designed for General Purpose: Water Dispenser Coffee Machine Auto Vending Machine Portable Electric Sprayer etc.   Product label: FLOWMATE, KDP-14B, Pump, Water Pump, Diaphragm Pump, Membrane Pump, Mini Pump, Micro Pump, DC Pump, DC Water Pump, DC Diaphragm Pump, DC Membrane Pump, Mini Water Pump, Mini Diaphragm Pump, Mini Membrane Pump, Micro Water Pump, Micro Diaphragm Pump, Micro Membrane Pump, Electric Pump, Electric Water Pump, Electric Diaphragm Pump, Electric Membrane Pump, Brush Pump, Brushless Pump, Food Grade Pump, Water Dispenser Pump, Water System Pump, Coffee Machine Pump, Vending Machine Pump, Ice Maker Pump, Agriculture pump, Electric Sprayer Pump,  Self-priming pump, micro self-priming pump, mini self-priming pump, self-priming water pump, self-priming diaphragm pump   Diaphragm Pumps are used extensively in many industries and can handle a very wide variety of liquids. Diaphragm Pumps are in the category of "positive displacement" pumps because their flowrates do not vary much with the discharge "head" (or pressure) the pump is working against (for a given pump speed). Diaphragm Pumps can transfer liquids with low, medium or high viscosities and also liquids with a large solids content. They can also handle many aggressive chemicals such as acids because they can be constructed with a wide variety of body materials and diaphragms   Features 1. Food grade2. Small size and easy installation3. Low noise with smooth running4. Self-priming with dry suction 1-2.5 meters5. Dry run without damage6. Long life permanent magnet DC brush motor7. Varible hosing port can be customized 8. Handling cold water and hot water 0-100℃   Applications 1. Water dispenser 2. Coffee machine 3. Vending machine 4. Ice maker 5. Tea table water dispensing 6. Integrated stove 7. Medical equipment 8. Chemical instrument 9. Electric sprayer 10. Wine taker 11. Water purifier/filtration   Specifications Model Hosing Port Rated Volts (VDC) Rated Amps (A) Open Flow (L/min) Noise 30CM (dB) Dry Suction (m) Head (m) Output Pressure (MPA) Weight (KG) Duty Cycle KDP-14B Φ1/4"(6.5mm) OD Pipe 12 0.2 0.8±0.2 43 1.0/1.8 2 0.08 (10PSI) 0.25 Intermittent 12/24 0.3/0.15 1.0± 0.2 45 1.2/2.0 5 0.15 (20PSI) 0.25 Intermittent 12/24 0.4/0.2 1.2± 0.2 48 1.5/2.5 7 0.2 (30PSI) 0.25 Intermittent 12/24 0.5/0.3 1.4± 0.2 50 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.6/0.35 1.6± 0.2 52 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.7/0.4 1.8± 0.2 54 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.8/0.5 2.0± 0.2 56 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 1.0/0.6 2.3± 0.3 58 1.5 10 0.3 (45PSI) 0.25 Intermittent Tested with clean water at 25℃。   Wetted Parts Material Construction Pump housing - PP/PP+20%GF Pump covers - PP/PP+20%GF Diaphragms - Silicone/EPDM/VITON/Santoprene TPV Check valve sealings - Silicone/EPDM/VITON   Performance Curve   Dimension Drawings

BLK-ED-110 ELECTRIC DRILL 13MM 1200W Disc Diameter 16mm Rated Input Power 1200W No-Load Speed 980r/min Rated Frequency 50/60Hz Rated voltage 220-240V~

The working principle of the machine is that the motor drives the flexible shaft to make the derusting head rotate.It is suitable for continuous heavy-duty derusting，derusting of steel plate deck，derusting of stem bar，derusting of steel pipe，etc.，in particular，the removal of surface or even large-scale equipment can not remove the irregular surface rust，corrosion film，old paint，adhesives and so on is particularly effective.Is the ship（deck engine room，Hull and other rust cleaning），steel enterprises and other places are very suitable for a machine. 1.It is strictly forbidden to use the machine on the platform with inflammable and explo-sive liquid or object.The high speed operation of the rust removing surface of the machine will produce sparks，which may cause fire or explosion. 2.Do not use this machine in potentially hazardous environments，such as gas stations，oil depots，chemical plants，etc.. 3.Pay attention to the daily maintenance of the machine，put it in a clean place，when use or storage，do not near the oven，fireplace and other heat sources，this may cause the machine external or internal parts deformation and aging. 4.Do not repair or change the performance of the machine if it breaks down.Consult your local dealer or manufacturer for professional repair advice first. 5.The machine motor is a high-power motor，please according to the specifications of the machine into the correct power supply，incorrect Voltage will cause the machine motor over-heating damage，it is recommended to use with Voltage Regulator

Discover the Brick Trowel With Lacquered Wood Handle, a superior tool for both professional bricklayers and DIY enthusiasts. This trowel is meticulously crafted with a robust stainless steel blade, ensuring a sharp edge for precise bricklaying. The lacquered wood handle not only adds a touch of elegance but also provides a comfortable grip, reducing hand fatigue during long work hours. Its durability and ergonomic design make it an indispensable tool for any masonry project, whether you're a seasoned pro or just starting out. SIZE 6" 7"  8"  MEAS(CM) 57x34x36 57x36x36 57x39x36 PACKING QTY(PCS) 6/60 6/60 6/60 G.W/N.W(KG) 20/18 22/20 24/22

Meet the Stainless Steel Stripping Knife, a cutting-edge tool for the construction hardware industry. This robust scraper is forged from high-quality stainless steel, offering unparalleled durability and resistance to corrosion. Its sharp, precise edge is perfect for cleanly removing coatings, adhesives, and other materials. The knife's design ensures a comfortable grip and efficient use, making it an indispensable asset for professionals seeking precision and longevity in their tools. Experience the difference with the Stainless Steel Stripping Knife.

The 18V EC Brushless Cordless Rotary Hammer Kit with 2 Core 18V 4 Ah Advanced Power Batteries is a powerful and versatile tool designed for professional use in construction, demolition, and drilling applications. Here's a detailed overview of the product's features, advantages, and applications

Advantages and Features — ① Integrated heavy-duty cast steel cutter head. Advantage 1: The knife holder is not easy to deform and is durable. Advantage 2: The lowest point of the knife edge is higher than 80% of the same types of equipment on the market, making it easier to cut large scrap steel and more goods. ② The fully enclosed adjustable guide rail also has an automatic injection lubrication system. Advantages: It effectively protects the cutter head for smooth shearing, is not easy to deflect, and cuts thick and thin materials without pressure. ③ The gantry frame is welded and fixed with high-strength, multi-channel rib plates. Advantages: The overall structural strength of the frame is higher. ④ Our company all adopts a double-layer material box lining design with wear-resistant plates. Advantages: firstly, to increase the strength of the material box; secondly, to protect the bottom of the material box from wearing for a longer period of time. The wear-resistant strength far exceeds that of conventional alloy steel plates. ⑤ The side ribs of the material box are thicker and denser than the same type of equipment on the market. Advantages: anti-collision, durable, and non-deformable ⑥ The height of the pressing head is higher than that of the same type of equipment on the market. Advantages: It is easier to pre-press when processing large scrap steel and large quantities of goods. ⑦ The material box can be equipped with conventional open type or door cover type. Advantages of the door cover type: It is not easy to lift up and splash when dealing with aniseed, long scrap steel, thrown goods, etc. The door cover also adopts wear-resistant plate. ⑧ The hydraulic station adopts a hot and cold isolation system to speed up cooling, and a dual filtration system of oil suction filtration and return oil filtration to reduce pipeline clogging. ⑨ Adopt quick disassembly and assembly of valve block.

The full range of 16v and 20v brushless systems gives you variable speed control and a safe braking system with a versatile battery and allows for a large number of charge cycles Battery voltage:20v Output shaft:3/4"Quadrilateral axis No-load speed:1800r/min Impact frequency:2400bpm Maximu torque:2000N.m Bolt specification:M16-M36 Delivery time:30 days Payment method:T/T,L/C Standard accessory:BMC BOX*1,Battery*2,charger*1

The full range of 16v and 20v brushless systems gives you variable speed control and a safe braking system with a versatile battery and allows for a large number of charge cycles Battery voltage:20v Output shaft:3/4:Quadrilateral axis No-load speed:1800r/min Impact frequency:2200bpm Maximum torque：1500N.m Bolt specification:M14-M30 Delivery time:30 days Payment method:T/T,L/C Standard accessory:BMC BOX*1,Battery*2,charger*1

The full range of 16v and 20v brushless systems gives you variable speed control and a safe braking system with a versatile battery and allows for a large number of charge cycles Battery voltage:20v Output shaft:1/2"Quadrilateral axis No-load speed:1800r/min Impact frequency:2200bpm Maximum torque:1000N.m Bolt specification：M12-M24 Delivery time:30 days Payment method:T/T,L/C Standard accessory:BMC BOX*1,battery*2,charger*1