BVM MEDICAL LIMITED

Description Series Thermostatic oil bath with digital readout and regulation of temperature and time. Unlike water baths, which only reach 100 ° C oil baths evenly heated samples to 200 º C. They can operate in continuous mode or programmed via a digital timer to work in specific time periods, from 1min up to 9 hrs and 59 min. An acoustic signal marks the end of the selected time period and also indicates overheating of the bath when the temperature thereof exceeds 5 º C at the selected temperature. The high accuracy sensor accuracy is ± 1 º C and is divided scale of 1 º C. They have drain hose. SPECIFICATIONS: Reference / Code 50602003 Model 602 / 3 Capacity 3 L Practical measures 18x18x32 cm External dimensions 32x23x17 cm Holes 1 Weight 4 kg

Description Series Thermostatic oil bath with digital readout and regulation of temperature and time. Unlike water baths, which only reach 100 ° C oil baths evenly heated samples to 200 º C. They can operate in continuous mode or programmed via a digital timer to work in specific time periods, from 1min up to 9 hrs and 59 min. An acoustic signal marks the end of the selected time period and also indicates overheating of the bath when the temperature thereof exceeds 5 º C at the selected temperature. The high accuracy sensor accuracy is ± 1 º C and is divided scale of 1 º C. They have drain hose. SPECIFICATIONS: Reference / Code 50602005 Model 602 / 5 Capacity 5 L Practical measures 33x18x14 cm External dimensions 47x23x19 cm Holes 2 Weight 7 kg

Description Multifunction vortex mixer 300-3000 rpm model 681/22. It allows a fast and effective mixture of substances thanks to its orbital vibrating motion. Features: Low and robust design. Legs with suction cup to warrant full adhesion. Backlit LCD display to monitor working parameters. Adjustable speed up to 3000 rpm (depending on the accessory used). Operation time can be set in seconds, minutes or hours. Continuous or touch operation mode. Technical data: Speed range: 300-3000 rpm (depending on accessory). Shaking motion: orbital (4.5 mm Ø). Shaking weight: maximum, 0.5 kg (with accessory). Timer. Seconds mode: 1 - 59 seconds. Minutes mode: 1 - 59:59 minutes. Hours mode: 1 - 24 hours. Continuous mode: continuous mode. LCD display. Operation room temperature: 5 - 40ºC. Operation room humidity: 80% RH. Operation altitude: maximum, 2000 meters. Protection degree IP21 (according to DIN EN 60529). Power supply: AC/DC adaptor 100-240V / 24V; 50-60 Hz. Dimensions: 21 x 15 x 6.5 cm. Weight: 2.5 kg. Accessories included: Type Vessels Continuous mode Touch mode Speed range (rpm) Standard Test tubes and small vessels. Diameter: up to 50 mm. Yes Yes 300-3000 Circular For the different foam accessories. No Yes 300-1300 For microplates For a microplate. No Yes 300-1300 Microdisk To insert in the circular accessory. No Yes 300-1300 For test tubes (1) It can be pierced depending on your needs. No Yes 300-1300 For test tubes (2) For 14 tubes ∅ 10 mm. No Yes 300-1300 For test tubes (3) For 6 tubes ∅ 12 mm. No Yes 300-1300 For test tubes (4) For 4 tubes ∅ 16 mm. No Yes 300-1300  

Description Tabletop centrifuge Multibas+ with swing rotor and great capacity. Specially designed to be used in fields such as medicine, biology, veterinary, chemistry, genetic engineering or immunology. Features: High durability. Precise control of centrifugation conditions (speed, time and RCF), thanks to its digital electronic circuit controlled by microprocessor. Maintenance-free induction motor. Backlit LCD display that facilitates setting and display of centrifugation parameters. Supplied with swing rotor compatible with different adaptors (not included, see section "optional accessories") for different types of tubes. Noise level: ≤ 65 dB. Alarm of centrifugation end or error detection. Airflow system to avoid overheating in the inner cuvette. Electronic lid opening (manual opening in case of network error). Robust and stable design that meets the necessary safety requirements: Casing made of high quality ABS plastic with steel base and legs with suction cups to ensure device stability. Stainless steel inner cuvette and steel safety chamber between the inner cuvette and the casing. Electromechanical lock system that avoids the lid opening during centrifugation and safety mechanism that prevents the machine from starting when lid is open. Protection system that stops centrifugation automatically when maximum speed is exceeded. Lid with metallic base and suspension mechanism. Observation hole. Probe to control microprocessor temperature. Technical data: Swing rotor. Maximum speed: 5000 rpm. Maximum RCF: 4980 xg. Timer: 1h 59' 59". Pulses function: yes. Acceleration ramp: 0-9 (< 35" from zero to maximum speed). Decceleration ramp: 0-9 (< 30" from maximum speed to zero). Programmes: 9. Noise level: ≤ 65 dB. Power supply: CA 230 V, 50-60 Hz, 10 A. Dimensions (DxWxH): 59 x 47 x 35 cm. Weight: 32 kg. Optional accessories (not included)*: Ref. 052-92751004: set of adaptors 24 x 15 mL for centrifuge 052-52751000. Ref. 052-92751005: set of adaptors 32 x 15 mL for centrifuge 052-52751000. Ref. 052-92751007: set of adaptors  48 x 7 mL for centrifuge 052-52751000. * They are all autoclavable.

Description Testsimplets ® Preteñidos slide Testsimplets ® are ready for use, which provide excellent differentiation of the cells contained in body fluids for examination under a microscope and for screening of urine cytology. Testsimplets enables rapid potential differential staining of urine sediment cancer cells, replacing the traditional staining methods to smears and time-consuming Pappenheim.The easy and clean, and the speed of standard stain colors allow Testsimplets functional use of the consultation and the hospital. Procedure The method of preparation of urine is similar to that used when preparing normal urinary sediment.1. Centrifuge urine at 3000 rpm for approx. 10 minutes.2. Carefully decant supernatant.3. Resuspend the pellet in 3 drops of saline.4. Place a drop of this suspension in the middle of the colored area of the slide and carefully place the coverslip on top of each included in the kit.5. After 5-10 minutes has already completed the process of staining.6. The preparation is now ready for consideration.The preparation is stable up to 5 hours at room temperature. Application Testsimplets is a rapid test in vitro diagnostics for affixing and displaying the differential blood picture under the microscope, being able to dispense with the preparation of a blood frontis Principle of test The test consists of a slide equipped with a colored layer. This layer consists of two colors: cresyl violet acetate and new methylene blue. The specific affinity of cellular structures with colors leads to different dyes that can establish a classification of cells. The intensity of color and proportion of mixed colors in the lining of the slide are constant and are standardized, thus obtain reliable staining. Content packaging 50 slides ready for use, equipped with a layer consisting of 2.1 mg / cm ² of cresyl violet acetate and 1.0 mg / cm ² of new methylene blue.The slides can be drawn from the case either by hand or with dispenser.50 coverslips (24 x 36 mm) free from dust Assessment Examine the preparation with an increase of × 100, then identify suspicious cells or cell configurations a × 200 or × 400 increases or oil immersion with an increase of × 1000.Because vital staining, the cells appear to its natural size, as compared with other methods, details such as the nuclear structure and membranes are clearly visible. Clinical Significance Testsimplets allows accurate differentiation and classification of structures and nuclear membranes, the network of chromatin and nucleoli and cytoplasmic structures.The urinary cytologic diagnosis is useful in:all forms of micro-and macroscopic hematuria.cystitis resistant to treatment.cistalgia.dysuria of unknown etiology.Patient follow-up after urothelial tumor operations.Early identification and monitoring of bladder cancer.The determination of the degree of malignancy is made in the same way as with conventional staining techniques. Product reference Ref 191,574

Description Falcon 40 Litres Autoclave Class S, with drying function. Wide range of use: suitable for packed / unpacked material, instruments, etc. Widely used in laboratories. Easy cleaning and maintenance. Made of stainless steel AISI 304. Fully automatic and easy to control, with automatic control of heating and sterilisation time. The entire sterilisation process is continuously monitored by a microprocessor control system. The sterilisation time begins when the pressure in the chamber (temperature) reaches the set point. Approvals CE - MDD, CE - PD Programmes: 4 programmes: Unpacked solid (118 °C and 22 minutes). Packed solid (118 °C, 30 minutes). Unpacked solid (134 °C and 4 minutes). Packed solid (134 °C and 15 minutes). Technical features: Manual water filling, with water tank. Pressure gauge for displaying temperature and pressure. Programme display by bright LEDS. Indicators for different phases, such as start, heating, sterilisation, drying and overheating. Adjustable sterilisation temperature from 118 °C to 134 ° C and sterilisation time from 4 to 60 minutes. Drying function with adjustable time 0-60 minutes. Security: Overpressure safety valve. Valve emergency venting. Protection for low water level and overheating. Overvoltage protection. Construction and measures: Chamber and door built in stainless steel AISI 304 Depth: 74 cm Width: 60 cm Height: 47 cm Weight: 66 kg Chamber diameter: 30 cm Chamber depth: 57 cm Chamber capacity: 40 litres Water tank capacity: 8400 cm3 Length of sterilisation container: 49 cm Width od sterilisation container: 19 cm Height of sterilisation container: 17 cm Packaging width: 70 cm Packing height: 57 cm Packing depth: 80 cm Power supply: 230V / 50 ~ 60Hz Power consumption: 2735 W / 12 Amp (2300 W heating - 435 W drying) Standards: EN 61010-1:2001 EN 61010-2-041:1996 EN 61326-1:2006 EN ISO 15223-1:2012 EN ISO 14971:2012 Accessories included: Heater cover and sterilisation metal box.

Description PN202 optimizes polishing system thanks to its ample working tool, which allows the brace polishing all in one go. Ortotec polished engine integrates external inputs for an optional suction polisher desktop. Available with ¾ c.v. Technical data: Left side of motor with extendable handle of 100 x 90 mm. Right side of motor with automatic accessory holder. Noise level 50 DB Electric power 230 V.50/60Hz Absorbed power 2 A. Net weight 18 Kg.

Description UNIT VACUPRES vacuum pressing. FEATURES: Vacupres combines a pressing plate, a control panel and a vacuum pump. Available in two versions, with or without external vacuum outlets. Presenting ​​a maintenance-free vacuum pump, which provides optimum vacuum levels for any application.Plate is pressed with latex membrane and Unifix closure system without anchors.The outer vacuum outlets, allow the brace molded directly onto the patient's foot or the connection of an additional Tecnoprint unit with foot pedal control. TECHNICAL Molded on positive plaster or polyurethane resin.

Description Autoclave POLEAX EC 10 litres. Description: The "Poleax" series is designed for high performance, reliability, safety and easy use. Wide use range: suitable for packed / unpacked material, liquids, etc. Widely used in laboratories. Easy maintenance: made of stainless steel AISI 304, easy to clean and maintain. Fully automatic and easy to control, automatic control of heating and sterilisation time. The entire sterilisation process is continuously monitored by a microprocessor, the sterilisation time begins when the chamber pressure (temperature) reaches the set point. MARK CE – EMC, LVD, CE – MDD Programmes: 3 programmes : Solid unpacked (122 ºC and 18 minutes) Solid packed (122 ºC and 33 minutes) Liquid (122 ºC and 33 minutes) On the liquid programme, do not depressurise the chamber by hand, let it lose pressure progressively Technical characteristics: Manual water filling Manometer for the display of temperature and pressure Programme display by led indicators Indicators for start, heating, sterilisaton and complete sterilisation Sterilisation time can be set between 18 and 33 minutes. Sterilisation temperature 122ºC (1.4 Kg/cm2) Drying function not available Security: Security valve for overpressure Emergency valve for gas Overheat protection switch Surge protector Safety lock Construction and size: The chamber and the door are made of stainless steel AISI 304 Depth: 56 cm / 21.8 inch Width: 29.5 cm / 11.5 inch Height: 36 cm / 14 inch Weight: 12.5 kg / 27 lb Diameter of the chamber : 20 cm / 7.8inch Depth of the chamber : 31 cm / 12.1inch Capacity of the chamber: 10 litres Useful height of the chamber, from tray: 13.5 cm / 5.3 inch Tray length: 28 cm / 10.9 inch Tray width: 17 cm / 6.6 inch Sterilisation container length: 27 cm / 10.5 inch Sterilisation container width: 15 cm Sterilisation container height : 10 cm / 3.9inch Packing width: 39 cm Packing height: 40 cm Packing depth: 57 cm Power supply: 230v / 50~60Hz Electricity consumption: 800 W Standards: EN 61010-1:2001 EN 61010-2-041:1996 EN 61326-1:2006 EN ISO 15223-1:2012 EN ISO 14971:2012 Accessories included: Tray Metal sterilisation container

Description Monocular biological microscope Specifications Model 520-M-100FL: Monocular Biological Microscope 400x to 1600x can be increased to incorporate the eyepiece 16x and 100x objective additional (not included in standard equipment).Head with ocular tube at 45 °, 360 ° rotating. Ocular WF10x/18, revolver rotating in both directions triple spring stop position of the targets.Achromatic objectives DIN 4x, 10x and 40x (telescopic). Coarse and fine focus on both sides of the instrument.Platina with clips. A.N. Capacitor 0.65 with iris diaphragm and filter holder. 230W/20W Incorporated lighting lamp and condensing lens above. Model 520-M-100FL-H: Same features of the model M-100FL, except the lighting is dichroic halogen lamp 12V/10W. Transformer included. Model 520-M-100FLed: Monocular biological microscope with the same features of the model M-100FL, except for the lighting made through three-LED (white light) with three long-lasting rechargeable batteries.It can be used normally while charging. Includes external battery charger.

Description Stereomicroscopes with fixed heads frontally inclined 45 °. Platina equipped with black and white disk contrast to sample clamps. In all models with transmitted light includes a frosted glass disc. All models with binocular head, have a system of regulation the interpupillary distance (between 51 and 75 mm). Compensation is adjustable diopter eyepiece tubes. Wide field eyepieces WF10x/20 mm. These models have wide 2x objective working distance (119 mm). The models with illumination for incident light or transmitted, have 12V/10W tungsten lamps. 230V/50Hz power supply. In all models, focus adjustment is by rack and pinion system with the use of knobs located on both sides of the bracket. Technical characteristics: Models "! Head Objective Illuminators 520-ST-50 Fijo - frontally inclined 45 ° Fixed-2x! Only incident 520-ST-50Led Fijo - frontally inclined 45 ° Fixed-2x! LED Optional accessories: Ref: 520-ST-001: Pair of Eye WF5x/22mm Ref: 520-ST-002: Pair of Eye WF10x/20mm Ref: 520-ST-003: Pair of Eye WF15x/15mm Ref: 520-ST-004: Pair of Eye WF20x/13mm Ref: 520-ST-005: Ocular micrometer WF10x/20 mm

Description Vertical autoclave. Capacity 50 litres. This autoclave provides sterilisation temperatures ranging from 118 ºC to 134 ºC / 244.4 ºF to 273.2 ºF.It is suitable for a wide range of applications: for wrapped goods, unwrapped goods and all kinds of instruments.Widely used in laboratories. Technical characteristics: Power: 2.8 Kw Capacity: 50 litres Material: stainless steel 304 Working pressure: 2.1 Kg/cm2 Working temperature: 118 °C - 134 °C / 244.4 ºF to 273.2  ºF Voltage: 220 V Type: vertical autoclave Stainless container Automatic sterilisation Manual water filling. Standards: CE-EMC.LVD, by TUV, CE-MDD approval by DNV, Chamber Designed By ASME / USA STANDARD Safety: Pressure control switch Safety valve Security system in the electrical circuit. Emergency exhaust switch. Pre-heating programme: Preheating by dry heat in order to maintain a balanced room temperature.  Dimensions: Chamber: 30 cm diameter x 71 cm deep / 11.7 x 27.7 in External dimensions: 60 x 100 x 45 cm / 23.4 x 39 x 17.5 in Standards: EN 61010-1:2001 EN 61010-2-041:1996 EN 61326-1:2006 EN ISO 15223-1:2012 EN ISO 14971:2012